Jump to content
Pimentel

Gerenciamento de energia para Sandy Bridge/Ivy Bridge/Haswell CPU

271 posts in this topic

Recommended Posts

Advertisement

Os states continuam baixos, ou é problema de video?

 

Pois como esses CPUs são projetados para dar desempenho quando precisa, talvez o clock normal dele, seja baixo mesmo.

Toda a vez que for rodar o MSRDumper ou AICPMinfo, rode o Geekbench junto, dai veja os resultados.

Share this post


Link to post
Share on other sites

Allan, graças à você. Ganhei mais dois "states"! Uso SMBios iMac13.1, e só tinha os "states" mínimo 16 e máximo 33. Agora que você falou que habilitou a "flag" "-xpcm", eu tinha receio em quanto à isso. Já que via muitos membros falando que o SMBios iMac, só garante dois "states" e eu mesmo já tinha confirma aqui isso. Tinha muito medo de dar algum problema.

Habilitei a "flag", e agora eu tenho os "states": 16, 24, 28 e 33. 

Valeu amigo.

Share this post


Link to post
Share on other sites

Mesmo com o Geekbench rodando... Eu já suspeitava q ia dar a mesma coisa, porq no HWMonitor ele informa que o "CPU Package Multiplier" tá sempre em x8.0...

Vou preparar um novo config.plist pra você.

Agora que está usando o Clover, não se esquece de retirar a SSDT, se não, pode dar conflito.

 

Allan, graças à você. Ganhei mais dois "states"! Uso SMBios iMac13.1, e só tinha os "states" mínimo 16 e máximo 33. Agora que você falou que habilitou a "flag" "-xpcm", eu tinha receio em quanto à isso. Já que via muitos membros falando que o SMBios iMac, só garante dois "states" e eu mesmo já tinha confirma aqui isso. Tinha muito medo de dar algum problema.

Habilitei a "flag", e agora eu tenho os "states": 16, 24, 28 e 33. 

Valeu amigo.

 

Opa, essa informação foi o PimentelX86 que forneceu, eu já tinha lido antes no blog do Piker R.Alpha, mas tinha receio de usar.

 

Até mais Bro.  ;)

Share this post


Link to post
Share on other sites

Uma duvida rápida Allan, comprei um Atheros AR5B93 que estava tudo verde na lista, é só instalar no notebook que ja vai tar tudo ok nativamente? E o que é OOB

Share this post


Link to post
Share on other sites

As vezes é só plugar e usar, mas em alguns casos requer a instalação da kext WifiInjector.

 

Em alguns casos para que funcione de modo correto, requer a reinstalação do OS X. 

Share this post


Link to post
Share on other sites

Desculpa pela demora! Eu realmente não sei ver se há atualizações... E se houver, ela deve ser instalada a partir do Windows, né? E eu não tenho mais o Windows na máquina :/

Share this post


Link to post
Share on other sites

Pode instalar (em alguns BIOS) pelo Pendrive.

Mas para ter certeza, verifique a versão atual do seu BIOS e vai no site do fabricante para ver se tem alguma atualização.

Share this post


Link to post
Share on other sites

Pode instalar (em alguns BIOS) pelo Pendrive.

Mas para ter certeza, verifique a versão atual do seu BIOS e vai no site do fabricante para ver se tem alguma atualização.

 

Brother, MIL DESCULPAS pela demora... Tava passando um período complicado na facul, e aí parei um pouco de mexer com essas coisas. Agora, nas férias, eu sentei com meu pai e consertei o cooler do notebook que tava com problema. Além disso, dei reset na BIOS. Mesmo assim, ficou sem funcionar. Após isso, desabilitei o Drop SSDT do Clover, e habilitei o gerador de P States e C States. Ao reiniciar, o Geekbench acusou 5000 pontos (:o) e o HWSensors vai até x22.

 

Creio que o meu problema realmente era a BIOS e o SSDT. Agradeço MUITO sua ajuda, to realmente sem palavras, o Mavericks tá rodando direitinho aqui na máquina... Valeu mesmo!!

Share this post


Link to post
Share on other sites

Olá

 

Não pude lhe ajudar, pois entendo como é ficar sem tempo, estava assim meses atrás.

 

Mas posso te dizer que achei bom que você revebeu suporte e que o OSX está rodando agora, mas usa esse app aqui para ver seus states: http://sourceforge.net/projects/dpcimanager/

Selecione P-States

 

Caso esteja usando 10.9.2 ou superior ele não vai funcionar, faz donwload dessa kext: https://www.dropbox.com/s/d2r6fodk92hfc6e/AppleIntelCPUPowerManagementInfo.kext.zip

Instala e abre o app console, nele escreve AICPUPMI na caixa de pesquisa e veja quantos states pega.

Share this post


Link to post
Share on other sites

Brother, MIL DESCULPAS pela demora... Tava passando um período complicado na facul, e aí parei um pouco de mexer com essas coisas. Agora, nas férias, eu sentei com meu pai e consertei o cooler do notebook que tava com problema. Além disso, dei reset na BIOS. Mesmo assim, ficou sem funcionar. Após isso, desabilitei o Drop SSDT do Clover, e habilitei o gerador de P States e C States. Ao reiniciar, o Geekbench acusou 5000 pontos ( :o) e o HWSensors vai até x22.

 

Creio que o meu problema realmente era a BIOS e o SSDT. Agradeço MUITO sua ajuda, to realmente sem palavras, o Mavericks tá rodando direitinho aqui na máquina... Valeu mesmo!!

 

Opa, tranquilo.

Que bom que funcionou cara, e se precisar de mais ajuda estou a disposição. 

 

É bom memorizar as configurações que fez, pois já já temos o OS X Yosemite!!  ;)

 

Abraços

Share this post


Link to post
Share on other sites

Parabens pelo tudo, dsdt ate agora parece russo.

To com um haswell, veja se o raciocínio esta ok,

kext AICPUPM fica a original,

Aplico o Kernel Patch para Haswell CPU(Kernel XCPM), uso a flag no boot do chameleon -xcpm, e obtenho o gerenciamento dai.

Os codigos da 10.9 servem para o 10.9.5?

Share this post


Link to post
Share on other sites

Maravilha Allan, instalação limpa, todos kexts stocks, sem null, so fake smc.

Vou fazer o ssdt, aplicar o patch no kernel e volto falar os resultados.

Ps. Numa outra instalação anterior, eu mudei o fakesmc para um mais novo, e nao mostrou mais

As temp dos cores, so aparecia temps do hd. Voltei a fake antiga e voltaram as temps.

Se eu colocasse o comando para ver a kext do power management, nao aparecia nada.

Pelo que entendi o gerenciamento xcpm e quem ta carregando, com o comando nao aparece por que

A power nao é carregada. Mas funcionava as temps hd, cores, turbo, sleep.

Testando eu passo a experiencia.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell     Skylake, Kabylake and Coffeelake is here http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-gigabyte-mobos-serie-200-kabylake-dsdt/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        Mojave Full DSDT patch   http://olarila.com/forum/viewtopic.php?f=59&t=6428   First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
    • By dannymozzer_
      Hi,
       
      I've been trying to install Mavericks 10.9, I know it's older now, but It's honestly the version I want to use, the specs of the PC are:
      Asus P8H61-MX USB3
      i3-3220
      8GB DDR3 Memory
      GTX 750 ti
      500GB HDD
       
      I've been following this guide: https://www.insanelymac.com/forum/topic/280756-guide-the-all-in-one-guide-to-vanilla-os-x-including-chameleon-dsdt-for-beginners-updated-for-yosemite/
      But, after booting, this is the error screen I get, any guidance on what Kexts, SMBios settings, etc. I need? I can tell I'm probably missing something here.

      Thanks,
      Dan
    • By DiddyKong
      Fully optimizing DSDT & SSDT for OS X Sierra POST INSTALL on a Dell345MT with a i7 - 920(first gen) 
       
      I know how this forum feels about 3rd party software, but that was just a crutch, I'm 100% vanilla now which is why I'm now posting for help because I eliminated the possibility having to do with 3rd party. Anyways, with that said I just have a couple things I want to be sure of.
       
      I used a n---bistro to get a App Store copy of Sierra, as I didn't know there were other ways of getting it now from a windows10 machine. anyways, I was able to build a vanilla usb. I couldn't figure the EFI out on my vanilla Sierra-usb, but the EFI on the usb-ni---bistro I had would boot my pre-install and post-install. so I was able to install Sierra. After a few days of figuring out how to remake a EFI and config, I broke my EFI.
      So back to my windows10 SSD and I found BootDiskUtility, and that made a EFI usb with the newest version of clover(r4895). So then swapped SSDs back to my OS X, plugged in the BDU-usb, after trial and error I got back into my Sierra. Now with the newest version of clover and no traces of ni---bistro anymore. Then copied the BDU-usb to my SSD EFI and was able to boot without a usb again!! YAY.
       
      Then starting working on fixing my web drivers for my gtx 1050 2gb. Installed the os update so i'm at 10.12.6, pulled my hair out figuring out the web drivers, eventually got them installed and the cuda fixed.
       
      Now all 3 of my screens work, yet windows can't sit 'between' screens, I just simply haven't looked for that fix yet as I want the sys itself running like a top first.
      My screen saver works, I don't get stuck in screensaver, I did once before, I believe lilu.kext and whatevergreen.kext fixed that.
      Now with all that I felt it was time to give my config.plist a diet cos it was bloated, I generated a config copied the clover settings check for check instead of coping text cos I'm trying to shrink it.
      Config.plist boots my system with DSDT-1FE7B5D7
       
      So after the above, This is now where I'm stuck
       a 100% correct DSDT and SSDT, from my understanding with a patched DSDT I wouldn't need any options selected in clover on the ACPI page?
       
      So with the patching part that I think I understand how to do it now, but when I extract with F4 every file has RSDT in front of it, I have one that says RSDP.aml and RSDT.aml
      so would I just erase the RSDT from the beginning of each file then go from their, which would then leave me with a DSDT.aml and 17 SSDTs?
      I know I have to decompile and patch them, but with my file names[DSDT table extract] not matching tutorials online I'm having a difficult time understanding which files I need.
      IS the RDST-DSDT.aml my DSDT? it is the biggest file.
      which ones that have SSDT in the filename is the SSDT(s) I need to patch?
       
      also how do I know if everything is patched correctly? like if my CPU is fully working and not just sorta working that way when I start running software like photoshop, unity, 10 chrome tabs, my hackintosh doesn't crash
       
      System details
      i7 920 (first gen) very similar to nehelam
      GeForce 1050 2Gb (3 monitors connected all work, one acer on HD connection, two HP s2031 on HD, using adapters to change all ports on GPU card to HD for screens)
          display port, HDMI, and HD
      4x 1Gg + 2x 8Gb RAM running at 1066 after injecting smbios with ram info macOS sees all my ram correctly
      Samsung SSD 860 EVO 500Gb
       
      Thanks to anyone that can help me out, I've been working on my system for about two weeks and this is basically the wall I finally can't seem to figure out how to pass
      I can post another info also if it helps
       
      Boot.log
      DSDTdump.Log

    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Install Clover in USB stick UEFI mode https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace Folder CLOVER INSTALLATION.zip   --Install System and boot with USB STICK! --Install Clover in UEFI mode and replace with my folder  Mavericks / Yosemite CLOVER Mavericks-Yosemite.zip El Capitan / Sierra CLOVER El Capitan-Sierra.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches! If you need DSDT edit... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generate in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609    --DSDT My DSDT DSDT.Asus Z97M-PLUS.zip   Patches  -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -EHCx -DARWIN -LPC -XHCI -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -HDMI -ALS0 -SHUTDOWN -LAN -PNLF --SSDT Generate your SSDT Power Management, use ssdtPRGen Piker-Alpha https://github.com/Piker-Alpha run in terminal curl -o ~/ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/Beta/ssdtPRGen.sh chmod +x ~/ssdtPRGen.sh sudo ~/ssdtPRGen.sh ssdtPRGen.command.zip
       
      --SSDT i74790K
      SSDT.i7 4790K.zip
       
      --IOREG
      iMac.ioreg.zip
       
      Clear NVRAM, Purge and Kextcache Olarila.command.zip   stock coolerand Rio 40º    --FakeSMC http://www.hwsensors.com/releases --Audio http://www.insanelymac.com/forum/topic/314406-voodoohda-289/ --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
          --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   -Replace Folder CLOVER Install.zip   -Install Sierra/High Sierra and boot into system!   -Install Clover and replace with my folder  CLOVER Post Install.zip   -Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches!   If you need DSDT edits for Skylake... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer IORegistryExplorer.app.zip -Run it, post files generate in your desktop RunMe.app.zip   -DSDT bios F21 My DSDT with patches for skylake DSDT.GA Z170M-D3H F21.zip   -Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS -MIKEY -BLC0 -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI






       
      -FakeSMC http://www.hwsensors.com/releases -Audio https://github.com/vit9696/AppleALC -USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads -LAN https://github.com/Mieze/IntelMausiEthernet   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
×