i've struggled to install Mac High Sierra from three days ago with an strange error then my pc restart ......
My PC specifications is
Cpu amd Athlon 620 II x2
Graphic Ati 5670 DDR3 2g
Motharboard msi 970 amd
I'm from Brazil, if someone wants to write in portuguese, i will understand too. But english is fine.
Days ago I installed the High Sierra, using the image (HighSierraAMD V2 UEFI.dmg). I have an FX8320e, the Asus M5A78L-M / USB3 mobo, GTX 750 and 12GB of RAM.
Well, I build Hackintosh to run audio programs. Everything is working except the USB audio card on the card. But I read that some gyus updates to 10.13.4 or higher and it work.
But I have some problem with startup and shutdown. I had installed the Clover in different ways, but it did not appear at startup. If I do not use the pen drive to boot, I do not have access to the system.
I've tried different solutions. I formatted the EFI partition using the Terminal and reinstalled the Clover, but it also did not work.
The other problem is the shutdown. The system goes off, but the fans and the mobo remains on. I need to manually press the on/off button to turn off the computer. I had used the Clover Configurations App to set the flag (shutdonw fix) but it not work too. I think this might be related to the boot problem.
can somebody walkthrough with the mojave installation guide?
i have a mac high sierra 13.6 version on my macbook pro and want to install mojave on my desktop
Exact config is Gigabyte gaming wifi 7 motherboard amy ryzen 7 2nd gen 2700X processor Gigabyte G1 8GB grapgic card VEGA 64
running 2 nvme Samsung 256gb cards and 1 intel 180gb ssd internal and 1tb WD HDD, with 64 GB 3200Mhz Ram
Hi guys i have a problem install macOs Mojave on my PC, I have this configuration:
CPU: Ryzen 7 2700X; GPU1: GTX 970 Strix(For game rendering and 144Hz Monitor); GPU2: GTX 750ti Strix(For 2nd monitor rendering to get 100% performances from 1st 144Hz Monitor); MotherBoard: MSI x470 GAMING PLUS Hard Disk 1 (Windows 10): Samsung EVO M.2; Hard Disk 2 (For Storage): RAID (1) between two hard disks; Hard Disk 3 (For Mojave): Kingston SSD 120GB;
I have created my USB with this:
Create Bootable USB
sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/USB -- /Applications/Install\ macOS\ Mojave.app -- nointeract && say Done.
XMPDetection = No.
Devices: (Not Enabled = [ ] - Enabled = [-] - Full Enabled [✓])
Inject (Full Enabled);
Add ClockID (Full Enabled);
FixOwnership (Full Enabled);
Gui: (Not Enabled = [ ] - Enabled = [-] - Full Enabled [✓])
Enabled (Full Enabled);
Screen Resolution: 1920x1080;
Kernel and Kext Patches: (Not Enabled = [ ] - Enabled = [-] - Full Enabled [✓])
Apple RTC (Full Enabled);
KernelPm (Full Enabled);
Inject Kexts = Yes;
Inject System ID;
VT-d = Disabled;
XHCI Hand-Off = Enabled;
Legacy USB Support: Enabled;
Hard Disk: AHCI Mode;
Selection Mode: Legacy + EUFI;
Clover Install Log:
Full Error Log: