Jump to content
BuchlerTM

Networking Issues on New Hackintosh

2 posts in this topic

Recommended Posts

Hello Everyone  :)

 

Just finished building my first Hackintosh, so I'm very happy at the moment.  I just have a few issues that I'm hoping this awesome community can help me resolve.  The specs for this hackintosh are the left-side specs in my sig.

 

I seem to be having some issues with the ethernet.  I tried all 4 of the Networking drivers in the Multi_Beast installer, but so far no luck.  In System Preferences->Network it says that the ethernet is connected, however I'm not able to access any of my Windows shares (smb). I can't connect to the internet either.  My router is connected to the ethernet network and I don't have any issues on my Windows PCs (Router Model:  D-Link DSL-2750U) but I'm not able to access the internet that way on my Hackintosh.  Right now I'm forced to tether my phone in order to access the internet.

 

I do hope you can help me and many thanks in advance.  :)

 

P.S. I did use assist me and here is some screenshots of it, hope it helps.: 

 

I clicked Diagnostics first: 

http://gyazo.com/eac76ee54af4a093cac04a2493a3093d

http://gyazo.com/32307b0c73de7dc29eaf84d97fdb44a3

http://gyazo.com/7b6eb071c72bcd6c4df27537e45f3198

http://gyazo.com/9ca169aca239c84b3eb49a1848f722e8

 

And then Assistant: 

http://gyazo.com/89c9b6c116c703f87a436e596bc50c99

http://gyazo.com/3cdb6dbd6f1b39a8c14abe51453d7769

http://gyazo.com/89f2e0b3e133243901a34a4ab79f0137

http://gyazo.com/d715faf719f2c865ac7483f9d537ef99

 

Share this post


Link to post
Share on other sites
Advertisement

hello

 

http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/

 

and u must not post unuseful info...

 

what lan card u have ?

 

post the dev id and vendor id of the card

 

use this to see it

 

http://www.insanelymac.com/forum/topic/219584-system-info-an-app-to-get-hardware-and-kexts-info/

 

for last forget " beast " thing if u want any help from this forum..

 

good hack

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By EWaffle
      Hey guys, I have a ridiculously convoluted issue. Take a seat.
       
      I am trying to use Logic Pro X on a 2012 Mac Mini I have, but I currently have Snow Leopard OS X 10.6.8, and will need to update to Sierra 10.12. However, I realize I need to update to a newer OS such as El Capitan in order to be able to update to Sierra. Except I cannot sign into the App Store. I am greeted with an error message along the lines of "this computer or device cannot be verified." So I did some digging and it seems to be because my Ethernet port and Wifi don't work. I use a USB Wifi adapter to get around this but now it seems like I finally have to fix it for good so I can get into the App Store to get these updates I need.
       
      In System Preferences > Network, I do not see Ethernet or Wifi listed. Only my USB Wifi Adapter and Firewire. In System Profiler > Hardware > Ethernet Cards, it says, "This computer does not appear to have any PCI Ethernet cards installed."
       
      I'm pulling my hair out over here to get Logic Pro X on this computer, that's all that I really want, and that's all I want this computer to do. If you can help, God bless your soul.
    • By Mieze
      This project is dedicated to the memory of Mausi, the cat I loved more than anybody else.
       

       
      A few days before Christmas I started my latest project, a new driver for recent Intel onboard LAN controllers. My intention was not to replace hnak's AppleIntelE1000e.kext completely but to deliver best performance and stability on recent hardware. That's why I dropped support for a number of older NICs. Currently the driver supports:
       
      5 Series
      82578LM 82578LC 82578DM 82578DC 6 and 7 Series
      82579LM 82579V 8 and 9 Series
      I217LM I217V I218LM I218V I218LM2 I218V2 I218LM3 100 Series (since V2.1.0d0)
      I219LM I219V 200 Series (since V2.3.0d0)
      I219LM I219V 300 Series (since V2.4.0d0)
      I219LM I219V Key Features of the Driver
      Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). Support for TCP/IPv6 and UDP/IPv6 checksum offload. Makes use of the chip's TCP Segmentation Offload (TSO) feature with IPv4 and IPv6 in order to reduce CPU load while sending large amounts of data (disabled). Fully optimized for Sierra (64bit architecture) but should work with older 64bit versions of macOS too, provided you build from source with the appropriate SDK for the target OS. Support for Energy Efficient Ethernet (EEE). VLAN support is implemented but untested as I have no need for it. The driver is published under GPLv2. Current Status
      The driver has been tested successfully with I217V, I218V and 82579V under 10.9.5 and above. The attached archive includes source code as well as a prebuilt binary (debug version) for Mavericks and Yosemite. Known Issues
      There seem to be problems while using VMware with version 1.x.x of the driver. In case you are affected use version 2.0.0 or newer. FAQ
      Could you add support of for...? Well, you are probably asking me to add support for one of the older NICs like the 82571/2/3/4L or 82583 and the answer will be no as I dropped support for these chips intentionally. They are broken and I lost more than 2 weeks trying to make it work on the 82574L without success. I was asked to add support for I210, I211 and I350 but as these chips have a completely different architecture, which isn't supported by the underlying Linux driver, this is impossible, sorry. Does it work with Snow Leopard or 32 bit kernels? No and I have no plans to make a version for 32 bit kernels or anything older than Lion. WoL from S5 doesn't work with this driver but under Windows it's working. Is this a driver bug? No it isn't, the driver is working as it should because OS X doesn't support WoL from S5. Installation
      Goto /S/L/E and delete AppleIntelE1000e.kext. Recreate the kernel cache. Open System Preferences and delete the corresponding network interface, e. g. en0. Reboot. Install the new driver and recreate the kernel cache. I recommend to use Kext Wizard or a similar utility for the installation. Reboot Open System Preferences again, select Network and check if the new network interface has been created automatically or create it manually now. Configure the interface. Troubleshooting
      Make sure you have followed the installation instructions especially when you have issues with certain domains while the others are working fine. Use the debug version to collect log data when trying to track down problems. The kernel log messages can be retrieved with "grep kernel /var/log/system.log" in Terminal. Starting from Sierra use "log show --predicate "processID == 0" --debug" in order to retrieve kernel logs. Include the log data when asking for support or giving feedback. I'm an engineer, not a clairvoyant. Don't copy and paste large amounts of log data to your post. Create an archive with the log data and attach it to your post. In case you don't want to make your log data publicly accessible, contact me via PM and I will provide you a mail address to send it directly to me.  Check your BIOS settings. You might want to disable Network Boot and the UEFI Network Stack as these can interfere with the driver. Double check that you have removed any AppleIntelE1000e.kext from your system because it could prevent the driver from working properly. Delete the following files: /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist /Library/Preferences/SystemConfiguration/preferences.plist Verify your bootloader configuration, in particular the kernel flags. Avoid using npci=0x2000 or npci=0x3000.  In Terminal run netstat -s in order to display network statistics. Carefully examine the data for any unusual activity like a high number of packets with bad IP header checksums, etc. In case auto-configuration of the link layer connection doesn't work it might be necessary to select the medium manually in System Preferences under Network for the interface. Use Wireshark to create a packet dump in order to collect diagnostic information. Keep in mind that there are many manufacturers of network equipment. Although Ethernet is an IEEE standard, different implementations may show different behavior causing incompatibilities. In case you are having trouble try a different switch or a different cable. Changelog
      Version 2.4.0 (2018-04-14) Added support for 300 series versions of I219LM and I219V. Updated underlying Linux source code. Version 2.3.0 (2017-06-20) Added support for 200 series versions of I219LM and I219V. Version 2.2.0 (2016-09-23) Disabled TSO to work around a hardware bug. Version 2.1.0 (2016-05-24) Added support for I219LM and I219V Version 2.0.0 (2015-04-22) First official release which is identical to 2.0.0d2 (only the version number has been changed). Version 2.0.0d2 (2015-04-04) Changed the tx descriptor write back policy for 82579, I217 and I218 to prevent random tx deadlocks. Version 2.0.0d1 (2015-03-14) Uses Apple's private driver interface introduced with 10.8. Supports packet scheduling with QFQ Solves the VMware issue. Version 1.0.0d6 (2015-03-04) Reworked TSO6 support to avoid problems with VMware. Wake-on-LAN now working. Version 1.0.0d5 (2015-02-27) Reworked TSO4 support to eliminate the bug of 1.0.0d4. Added some debug code in order to collect information about the VMware related issue. Version 1.0.0d4 (2015-02-25) Set total length field of the IP-header to zero for TSO4 operations. Report EEE activation state in kernel log message when the link has been established. Version 1.0.0d3 (2015-02-11) Reworked media selection and EEE support (EEE is now activated when both link partners support it. It can be disabled selecting the medium manually). Duplex setting for 10/100 MBit connections is now reported correctly. The number of tx descriptors has been reduced from 2048 to 1024. The code has been cleaned up and obsolete files have been removed. Version 1.0.0d2 (2015-01-31) First development release. Getting the Driver
      The source code can be found on GitHub: https://github.com/Mieze/IntelMausiEthernet There is also a prebuilt binary for 10.11 and above in the download section: http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/ Build from Source for 10.8
      Register as a developer on Apple's developer website. A free membership is sufficient. Download a copy of Xcode 5.1.1 and install it on your machine. In the project select 10.8 as the "Base SDK" and the "Deployment Target". Call "Archive" from the menu "Product" and save the built driver. Credits
      Thanks to RehabMan and Yung Raj for running tests and pointing me in the right direction while I was trying to fix TSO. Special thanks to Yung Raj for motivating me when I was about to give up.
    • By Mieze
      Driver for recent Intel onboard LAN controllers. Currently the driver supports:
       
      5 Series
      82578LM 82578LC 82578DM 82578DC 6 and 7 Series
      82579LM 82579V 8 and 9 Series
      I217LM I217V I218LM I218V I218LM2 I218V2 I218LM3 100 Series
      I219LM I219V 200 and 300 Series
      I219LM I219V Please see the project's homepage at http://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/ for a detailed project description.
    • By liuhongxin1993
      ASUS x99-e-10G ws  
      X550-T2
      http://pci-ids.ucw.cz/read/PC/8086/1563
      https://downloadcenter.intel.com/download/14687/?product=88209
      Requesting Linux compilation of High Sierra 10.13.4

      ixgbe-5.3.6.tar.zip
    • By zeg66
      Have managed to boot into Finder without a usb but cannot see the outside world. Could you please help me to enable Marvell 80E8056 ethernet access on 10.9.5 13F34 ?
×