Jump to content
redheadturkey

Possible to Hackintosh?

2 posts in this topic

Recommended Posts

My setup:

 

Asus m4a79xtd Evo motherboard

AMD Athlon II 3.2 ghz Rana processor, all four cores unlocked

AMD 4600 HD graphics card

Dynex network card (Runs off Realtek drivers)

 

I am also running a Logitech g35 headset, but they have the driver software available for a mac, so not worried too much about that. I tried it before, with a distro, and it would get as far as booting to disc but then boot loop while trying to install.

 

 

Clear instructions and links to all of the patches I might need would also be well appreciated, the use of the one distro I ifollowed the directions given and it still bootlooped me. 

 

 

Thanks.

 

Edited to add: I am fairly tech savvy (I have rooted both mine and my husband's android phones and installed custom roms, no problem, and have also jailbroken my playstation portable and put custom firmare on it, if that is any indicator. XD) I just need to know *exactly* what I may be doing wrong so I can fix it.

 

 

Also to add: I am going to bookmark that link, mod can delete dup post. :)

Share this post


Link to post
Share on other sites
Advertisement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Coddyx
      Hi,
       
      I followed the AMD OSX Vanilla Guide and managed to successfully build my first hackingtosh.
      Everything works great EXCEPT for my MSI - Radeon RX 580 8 GB GAMING X.
      I ran some benchmarks (and tried World of Warcraft) and I am getting ~50% of the performance I am usually getting in Windows 10.
      Unigine Heaven reports ~950 vs 1750 in Windows and World of Warcraft runs @ 30 fps lowest settings vs 60 fps ultra settings in Windows.
       
      Here are the kexts I am using:
      AppleALC Lilu NullCPUPowerManagement RealtekRTL811 VirtualSMC WhateverGreen  
      I should mention that this is an AMD hackingtosh running on Ryzen 5 1600 3.2 GHz 6-Core Processor.
       
      I read and I completely understand that I should not expect 100% performance. But I believe a 50% drop is out of the ordinary.
       
      If anyone has ideas on what I could try to up the performance it would be greatly appreciated.
       
      Thank you!
       
       
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   ***The topic is for Notebooks and Desktops***   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
          -Mojave Full DSDT patch http://olarila.com/forum/viewtopic.php?f=59&t=6428 First... ***Update bios to last available version!***   If you need DSDT edits for SkyLake, KabyLake or CoffeeLake... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app     Look at my Clover folders and understand what we really need, this is the best way to learn     1-Installation     --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder    https://olarila.com/files/Clover.Folder/CLOVER.SERIES.100.200.300.zip   --Install Sierra/High Sierra and boot into system! 2-Post Installation     --Install Clover in HDD/SSD and replace with my folder   https://olarila.com/files/Clover.Folder/CLOVER.SERIES.100.200.300.zip   --Reboot and activate video!   3-Video     -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/   -Nvidia WebDriver High Sierra   http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/   -Cuda   http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   -Check it, easy way   nvidia-update.command.zip by Benjamin-Dobell   4-DSDT       Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC* -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS* -BLC0 -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -IMEI -EC -PNLF(Nvidia/AMD) -HDMI ---To avoid problems use some patches in config.plist, don't forget!--- GLAN to GIGE 474c 414e 4749 4745 GFX0 to IGPU 47465830 49475055 HDAS to HDEF 48444153 48444546 HECI to IMEI 48454349 494d4549 SAT0 to SATA 53415430 53415441 5-SSDT   Generate your SSDT for PM, use ssdtPRGen by Piker-Alpha https://github.com/Piker-Alpha ssdtPRGen.command.zip   or just use "plugin-type"=0x01 in DSDT, SSDT or Clover config.plist   for check Power, Frequency, Temperature and Utilization, use it Install Intel Power Gadget.pkg.zip   6-Brightness  
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
        -Clover   https://sourceforge.net/projects/cloverefiboot/files/Installer/   -Lan driver by Mieze     -Atheros http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   -Links     -FakeSmc https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   if u like, Rate Topic     It's time to Rock -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, badruzeus and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell     Skylake, Kabylake and Coffeelake is here http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-gigabyte-mobos-serie-200-kabylake-dsdt/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        Mojave Full DSDT patch   http://olarila.com/forum/viewtopic.php?f=59&t=6428   First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
    • By Candrahm
      Hi everybody,
       
      I'm new here and French. 
      I success to hack my Asus X751LJ and pass it to High Sierra 10.13.6, not easily, and everything works except the keyboard and the touchpad.
      I tried VoodooPS2Controller, ApplePS2SmartTouchpad, even VoodooI2C, but nothing works...
      Could someone help me? Is there a DSDT problem? Witch kext should I use?
      I post my ACPI and Kexts folders and my IOReg.
      Please... Help me. I'm desperate...
      MacBook Pro de Candrahm.ioreg
      Archive.zip
    • By BauerMac
      Hey guys,
      I hope you can help me solve a mystery.
      Even the amazing Mald0n has been working hard to help me find a solution, but now were are both stuck.
      Creative thinking or maybe just help to see the forest for the trees would be highly appreciated.
       
      PROBLEM:
      Mac will not sleep.
      Monitors sleep fine, and come back on with touch of keyboard.
      GPU and CPU coolers are constantly running on idle to low load and will not go on standby no matter what we have tried.
      Even when using full “Shut down” via apple menu the lights from the MoBo or GPU are pulsing slowly, which they normally dont as far as I recall.
      (This specific issue could possibly be solved by using ErP Ready in BIOS. Haven´t tested this since that´s a smaller issue ATM)
       
      Everything else seems to be working fine.
      This problem started appr a week ago, and I have no idea why.
      No major installs, updates or changes that I can think of.
       
      GOALS:
      • To be able to activate sleep via apple menu.
      • To have it sleep within 15-30 secs and wake up quickly (like it did before) via push on Power button

      TECH SPEC:
      • Running 10.13.6
      • Asus Maximus X Hero Wifi
      • Gtx 1080 Ti
      • 32 GB Corsair RAM
      • Intel i7 8700K
      • 2 monitors via Displayport
      • 6 internal disks (2 HDD, 4 SSD)
      • 1 external backup
      • 1 internal USB hub/SD reader
      • 3rd party Bluetooth and Wifi (Asus MB not compatible)
      • No Blutooth mouse, KB etc

      WHAT I HAVE DONE SO FAR:
      • Used Mald0n’s custom DSDT with latest config
      • IUpdated to latest Security Update
      • Updated to latest BIOS
      • Updated NVIDIA webdriver and CUDA to latest
      • Disconnected LED monitors and tested with old Mac monitor via DVI to see if Displayports were the issue
      • Disabled Adobe CC Sync
      • Run CleanMyMac
      • No start-up apps or extensions in System Prefs
      • Disk Utility: checked all disks
      • Terminal: no info on wake reason at all. (Possibly because it doesn´t sleep, hence nothing is interrupting it).
      • Blutooth allowed to wake sleep: set to OFF
      • Power manager: only setting is “never switch off monitors”. The rest are off/unchecked
      • BIOS: Tested by setting "ErP ready" to S5 > no difference
      • DSDT and EFI folder screenshot attached.

      I think that’s it - otherwise just ask
      I have read a lot of articles on this type of issue, but none with a clear answer.
      So if anyone can solve this mystery, it would be amazing!
      Thank you in advance!
       
      Bauermac DSDT.aml.zip



      UPDATE:
      Of course it was something seemingly insignificant and stupid that prevented sleep: An unfinished PRINTER job.... 
      After clearing the printer queue, it went to sleep but woke up immediately after due to a USB power issue. Possibly an internal USB/SD hub.
      Mald0n used his magic and made a new DSDT file to fix that, and now the machine is running almost perfectly apart from a fickle Bluetooth (fingers crossed).

      Hope this can help others out there with issues.

       
×