Jump to content
InsanelyMac Forum
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.



  • Similar Content

    • By verymilan
      Hi, i recently set up High Sierra on my AMD computer with the help of the amdosx community (i actually used an installer just to confirm that something would work in the first place before i spend hours for nothing, i can and could have downloaded High Sierra the "legal" way).
      However the graphicscard is recognized properly, the 6gig are recognized and i have no artifacts and no screen tearing with the official nvidia webdriver,
      but unfortunally, dark colors have horizontal dark stripes in them and specific bright colors like on left bar of system windows such as settings do flicker like low fps.

      I only used the clover on the flash drive for now and i'd like if it's worth digging deeper of if i should just forget about it as it is a common nvidia problem on macOS.
      Would be amazing to know.
       
      Closer machine infos:
      * High Sierra (misses a recent minor patch as my network is veeeery slow and i got this nvidia issue anyway so i mainly jumped back to linux)
      * AMD fx8350
      * Asus Sabertooth 990fx Ref. 2.0
      * NVIDIA GeForce GTX 1060 6GB
       
    • By coscos
      I recently set up my hackintosh. Everything else works fine, the only issue is my monitor cannot come back from sleep.
      Symptom: 
      If I click the "sleep" menu manually, the system goes to sleep fine. After the system sleeps for a while (more than a few mins, I guess it's called "deep sleep"), when I try to wake it up, the monitor wakes up but stays black screen. The machine is on. If I leave the system to time out and sleep by itself, only the monitor goes off; when I try to wake it up, same symptom as above.
      What I have tried (but none worked):
      additional boot flag: ngfxpatch=pikera additional boot flag: darkwake = 0 Customize EDID
      Specs:
      Motherboard: Gigabyte Z77x-UD5H BIOS: F16j CPU: Ivy Bridge i5-3570K CPU @ 3.40GHz (quad core) Graphics: Nvidia GTX 1050 Monitor: Dell P2715Q @ 4k / 60Hz, Display Port Wifi / Bluetooth: BCM94360CS with PCIE Onboard GPU: disabled OS: High Sierra 10.13.3
      Please see attached for following files:
      EFI zip file: https://www.dropbox.com/s/8nun37msu9b1bva/EFI.zip?dl=0 I generated my own SSDT.aml using ssdtPRGen.sh; Other SSDT patches are copied from this repository: https://github.com/VoiletDragon/Z77X-UD5H-Clover-Hotpatch-Patches ioreg dump: https://www.dropbox.com/s/5a10k82guczaaws/macchiato.ioreg.zip?dl=0 result from following command: https://www.dropbox.com/s/0b22qcw79ovnjdg/kext-touch.txt.zip?dl=0 kextstat|grep -y acpiplat kextstat|grep -y appleintelcpu kextstat|grep -y applelpc kextstat|grep -y applehda sudo touch /System/Library/Extensions && sudo kextcache -u /
      I am looking forward to your suggestions. Thanks.
    • By zeg66
      Please help me with this 10.9.5 system. Motherboard: Gigabyte 965p-s3 rev3.3, gpu: Ati Radeon HD6450 (dvi/hdmi/vga). 
      Using any of the 3 ports on the 6450 (dvi, hdmi, vga), I see all the white letters on black background during boot but when they complete and it's time for the graphics to start I get a black screen and sometimes a restart after that. Using Clover 4411. Is there any way to get past this?
    • By Oschly
      When I installed 10.13.4 I tried to boot macOS with iGPU enabled only in BIOS (without injecting and kexts, HD 4600) and my daily use dGPU (GTX 750 Ti, injected in config and web drivers enabled) and everything works fine, but it boots slower. There is a chance to make fully working dGPU and iGPU at one time? With kexts, injects, et cetera? Something like dGPU as eGPU and iGPU as main GPU? I don't want to break my build, so I am asking you before trying it.
      My computer:
      MOBO: Gigabyte P85-D3
      GPU: Gigabyte GTX 750 Ti Windforce (2GB VRAM)
      CPU: i5-4670
      RAM: 8GB DDR3 1600MHz
      Audio: ALC887
      Ethernet: Realtek RTL 8111
      Drives: SSD Goodram 240GB and HDD 1TB.
    • By zeg66
      Could you please help me enable the VGA port on the GT710 in 10.9.5 13F34 ? 
      It is currently booting fine through its HDMI port, web driver 334.0103f01 and config.plist arguments checked: Verbose (-v), npci=0x2000, dart=0, nvda_drv=1
      The nvidia GT710 works fine through its VGA port and web drivers on a friend's Mac Pro 3,1
      I must soon return this borrowed HDMI monitor, mine only has a VGA port so I'd appreciate your input.
×