Jump to content
Uoc Nguyen

Thinkpad T430 - Mavericks 10.9.x - Yosemite 10.10

104 posts in this topic

Recommended Posts

Requires kext and DSDT edits. Follow instructions in post #48.

 

Upgrading OS X point version will depend on your procedure for installing... Many updates contain changes to kexts you may have patched, and thus will be overwritten.

Thanx for the info. If i create a DSDT now would that affect my current running mavericks instance. Is there a possibility to create a DSDT only for the brightness fix. Any guide to create DSDT would be a real help.

Share this post


Link to post
Share on other sites
Advertisement

Thanx for the info. If i create a DSDT now would that affect my current running mavericks instance. Is there a possibility to create a DSDT only for the brightness fix. Any guide to create DSDT would be a real help.

Not sure I understand the question. The whole idea of patching DSDT is to "affect... current running mavericks instance", right? The idea being to fix backlight control.

 

Basic instructions for using MaciASL are provided at my github link for my laptop repo (first link in post #48). Have you read it yet?

Share this post


Link to post
Share on other sites

Not sure I understand the question. The whole idea of patching DSDT is to "affect... current running mavericks instance", right? The idea being to fix backlight control.

 

Basic instructions for using MaciASL are provided at my github link for my laptop repo (first link in post #48). Have you read it yet?

My question was can i create a DSDT only to fix the brightness issue or would i have to create a DSDT to configure for the entire system. My current Mavericks (10.9.0) installation works with out any DSDT. I did try to use a close DSDT to my machine config but i failed to boot so was not sure how to create it

Share this post


Link to post
Share on other sites

My question was can i create a DSDT only to fix the brightness issue or would i have to create a DSDT to configure for the entire system.

The instructions in post #48 provide only for fixing backlight control.

 

My current Mavericks (10.9.0) installation works with out any DSDT.

Not true. BIOS is providing native OEM DSDT. A DSDT, whether patched or not, is always in play.

Share this post


Link to post
Share on other sites

The instructions in post #48 provide only for fixing backlight control.

 

 

Not true. BIOS is providing native OEM DSDT. A DSDT, whether patched or not, is always in play.

Oh ok great. that a piece of information i was not aware of. thank you. So can i create a new DSDT using maciASL and add ur Brightness Fix using the DSDT patch.

Share this post


Link to post
Share on other sites

The instructions in post #48 provide only for fixing backlight control.

 

 

Not true. BIOS is providing native OEM DSDT. A DSDT, whether patched or not, is always in play.

@Rehab,

    I have a completely working snappy system. Thank you so much for all your help. I would like to know how to enable iPad charging using the USB ports and suddenly my camera stop working for FaceTime. Any help on this

Share this post


Link to post
Share on other sites

hi Uoc Nguyen, thanks for your great effort.

 

may i ask 2 questions,

 

1. is this installation under UEFI+GPT or Legacy+MBR?

 

2. how do you deal with the wireless card finally? is a replacement of wifi card possible? or we can only use a USB-Wireless-Card?

Share this post


Link to post
Share on other sites

hi Uoc Nguyen, thanks for your great effort.

 

may i ask 2 questions,

 

1. is this installation under UEFI+GPT or Legacy+MBR?

 

2. how do you deal with the wireless card finally? is a replacement of wifi card possible? or we can only use a USB-Wireless-Card?

Hi 
 
if you refer to my installation post and relative package, the setup is totally based on UEFI+GPT.
For  the WiFi i use a Linksys ExpressCard based on Broadcom chipset  that work OOB with OSX. I prefer this solution, because i use my system in working environment and i need to use WPA2 Enterprise authentication that is provided by original Apple extensions. Otherwise the USB wifi dongle,often use an external app for wireless discovery and authentication and is recognized by the system like a classic ethernet device.

Share this post


Link to post
Share on other sites

@eilatuno,

    Could you specify the linksys express card model no and which was the latest supported mac os x OOB

 

Hi 
 
if you refer to my installation post and relative package, the setup is totally based on UEFI+GPT.
For  the WiFi i use a Linksys ExpressCard based on Broadcom chipset  that work OOB with OSX. I prefer this solution, because i use my system in working environment and i need to use WPA2 Enterprise authentication that is provided by original Apple extensions. Otherwise the USB wifi dongle,often use an external app for wireless discovery and authentication and is recognized by the system like a classic ethernet device.

 

 

Share this post


Link to post
Share on other sites

hi Uoc Nguyen, thanks for your great effort.

 

may i ask 2 questions,

 

1. is this installation under UEFI+GPT or Legacy+MBR?

 

2. how do you deal with the wireless card finally? is a replacement of wifi card possible? or we can only use a USB-Wireless-Card?

 

@Demonbane

 

1. I'm using UEFI with GPT partitions.

2. I'm using the USB wifi dongle, as eilatuno said, USB wifi dongle will be use an extra application to scan and authenticate wifi network, it is annoying as you will need to start it up when login and wait for it ready before connect to wifi network, and yes, it is recognized as a wired network (ethernet) in network setting / system. So it you will not able to use AirDrop without force enable it before. I have not used express card yet, but I think it will be better than USB dongle option.

Share this post


Link to post
Share on other sites

@eilatuno,

    Could you specify the linksys express card model no and which was the latest supported mac os x OOB

The card is the Linksys WEC 600N, i bought it on ebay at this link http://www.ebay.com/itm/New-Cisco-Linksys-WEC600N-Dual-Band-Wireless-N-Ultra-RangePlus-Expresscard-/400344427648 (search on internet for other sources..).

I choose this card because i found a guy on the web with original Macbook Pro out of warranty and with airport broken, that use this card for replacement.

Refer to my original post http://www.insanelymac.com/forum/topic/293762-thinkpad-t430-mavericks-109x/?p=2020717

Share this post


Link to post
Share on other sites

The card is the Linksys WEC 600N, i bought it on ebay at this link http://www.ebay.com/itm/New-Cisco-Linksys-WEC600N-Dual-Band-Wireless-N-Ultra-RangePlus-Expresscard-/400344427648 (search on internet for other sources..).

I choose this card because i found a guy on the web with original Macbook Pro out of warranty and with airport broken, that use this card for replacement.

Refer to my original post http://www.insanelymac.com/forum/topic/293762-thinkpad-t430-mavericks-109x/?p=2020717

Thanx for that info. Does wake using external keyboard or mouse work ?

Share this post


Link to post
Share on other sites

UocNguyen you have sleep working ? My brother has a T430 comes with only HD4000 ( no Nvidia GPU ) resolution 1600x900 and sleep isn't working ( shutdown immediately ). How comes you can get yours to sleep ? I patched the DSDT using Rehabman repo, the DSDT is almost perfect except for the sleep issue, otherwise things are good

Good to see another Vietnamese fella here

Share this post


Link to post
Share on other sites

UocNguyen you have sleep working ? My brother has a T430 comes with only HD4000 ( no Nvidia GPU ) resolution 1600x900 and sleep isn't working ( shutdown immediately ). How comes you can get yours to sleep ? I patched the DSDT using Rehabman repo, the DSDT is almost perfect except for the sleep issue, otherwise things are good

Good to see another Vietnamese fella here

Make sure you have properly implemented native power management.

 

Also, make sure you're not dropping an OEM SSDT that is needed (typically... the one with IAOE object is needed, for example).

Share this post


Link to post
Share on other sites

UocNguyen you have sleep working ? My brother has a T430 comes with only HD4000 ( no Nvidia GPU ) resolution 1600x900 and sleep isn't working ( shutdown immediately ). How comes you can get yours to sleep ? I patched the DSDT using Rehabman repo, the DSDT is almost perfect except for the sleep issue, otherwise things are good

Good to see another Vietnamese fella here

I have sleep work well. As RehabMan said, you will need to patch ACPI Power management kext and make sure the DSDT section for it is patched also.

The sleep start working since I upgrade to 10.9.3. It was something changed from Apple core / kernel.

Share this post


Link to post
Share on other sites

Hi  I have a problem with my  laptop Model  Thinkpad T430 2344BMG , I installed OSX mavericks  using   niresh distro maverick usb and  files  from post #1  for 10.9.3  and post #42 for graphics fix   everything work's  but graphics QE/CI  and an USB no.

 

 

I using Chameleon-2.2svn-r2344.pkg  bootloader because clover not show  win 8.1 partition I do not know why. USB working when conect mouse or usb storage but  when connect iDevice  system freeze  in terminal see kernel  panic.

 

USB

 

I tried severals IOUSBFamily.kext  but not works  also  I treid GenericUSBXHCI.kext  for 10.9.4   and  Delete AppleUSBXHCI.kext from stock IOUSBFamily.kext  System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBXHCI.kext   every experiment was unsuccessful   on some cases usb not work's absolutely.

 

Screen_Shot_2014_09_10_at_2_41_02_PM.png

 

Graphics 

 

When  open lunchpad and scroll  page  graphics are rendered slowly I tried fix in org.chameleon.Boot.plist from other forum  but also  unsuccessful

 

<key>device-properties</key>

<string>7f0000000100000001000000730000000200000002010c00d041030a000000000101060000027fff04002c0000004100410050004c002c00690067002d0070006c006100740066006f0072006d002d006900640000000800000004006601140000006800640061002d0067006600780000000d0000006f6e626f6172642d31</string>

 

 

 

Screen_Shot_2014_09_10_at_2_40_36_PM.png

 

 

In DSDT.aml using this patch

             

  Method (_DSM, 4, NotSerialized)

                {

                    Store (Package (0x1A)

                        {

                            "AAPL00,DualLink", 

                            Buffer (0x04)

                            {

                                 0x01, 0x00, 0x00, 0x00

                            }, 

                            "device-id", 

                            Buffer (0x04)

                            {

                                 0x66, 0x01, 0x00, 0x00

                            }, 

                            "AAPL,ig-platform-id", 

                            Buffer (0x04)

                            {

                                 0x03, 0x00, 0x66, 0x01

                            }, 

                            "AAPL,HasPanel", 

                            Buffer (0x04)

                            {

                                 0x00, 0x00, 0x00, 0x00

                            }, 

                            "AAPL,Haslid", 

                            Buffer (0x04)

                            {

                                 0x01, 0x00, 0x00, 0x00

                            }, 

                            "AAPL,backlight-control", 

                            Buffer (0x04)

                            {

                                 0x01, 0x00, 0x00, 0x00

                            }, 

                            "@0,backlight-control", 

                            Buffer (0x04)

                            {

                                 0x01, 0x00, 0x00, 0x00

                            }, 

                            "@0,AAPL,boot-display", 

                            Buffer (0x04)

                            {

                                 0x01, 0x00, 0x00, 0x00

                            }, 

                            "@0,built-in", 

                            Buffer (One)

                            {

                                 0x01

                            }, 

                            "vendor-id", 

                            Buffer (0x04)

                            {

                                 0x86, 0x80, 0x00, 0x00

                            }, 

                            "subsystem-vendor-id", 

                            Buffer (0x04)

                            {

                                 0xAA, 0x17, 0x00, 0x00

                            }, 

                            "subsystem-id", 

                            Buffer (0x04)

                            {

                                 0x07, 0x50, 0x00, 0x00

                            }, 

                            "revision-id", 

                            Buffer (0x04)

                            {

                                 0x09, 0x00, 0x00, 0x00

                            }

                        }, Local0)

                    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))

                    Return (Local0)

                }

 

 

 

 

Please advise me what I still try.

 

Best Regards  

Share this post


Link to post
Share on other sites

I use 10.9.4,but"Intel HD 4000 Capri: patch with Platform-ID `0300 6601` - Hex: `01 00 00 00 02 00 00 00 30 02 00 00`"

how to do?

why 0300 6601= HEx 01 00 00 00 02 00 00 00 30 02 00 00?

Share this post


Link to post
Share on other sites

You should follow this guide http://forum.osxlatitude.com/index.php?/topic/2945-guide-for-enabling-vga-and-hdmi-in-intel-hd4000-gpu/

 

My hex is writing in form of vim + xxd, it is default to 1 word (4 digits) per column. The `0300 6601` is platform id and `01 00 00 00 02 00 00 00 30 02 00 00` is for LDVS (Laptop built-in display). Depend on version of OSX, you can try: `01 00 00 00 02 00 00 00 30 02 00 00` or `05 03 00 00 02 00 00 00 30 02 00 00`.

Share this post


Link to post
Share on other sites

Hi all.

 

I would like to share the results of  mixing my work and work of  other before me on my T430s (2355).

I use the post of UocNguyen as template(Thanks for the work!)

Working:

  • CPU PowerManagement  (SpeedStep enabled using ssdt-gen script and clover states generation option)
  • Intel HD4000 with AppleIntelFrameBufferCapri patched at latest version (10.9.3) to use internal LVDS and external DP port (i read apple removed support for embedded VGA start from 10.8.3 kext, from my tests i'm able to use a VGA monitor while start laptop from docking station with lid closed but there are something bad with EDID probe and with refresh so i think the very big problem is the VGA output use the same channel of internal LCD/LVDS)
  • Audio work with patched AppleHDA (and IOAudioFamily from 10.9.0) Speaker/Headphone/Internal Mic/Mic on headphone/
  • Ethernet work with AppleE1000.kext
  • Trackpoint, touchpad and keyboard work with VoodooPS2
  • Patched Bluetooth kext with support for BCM20702A0
  • USB 3 with GenericUSBXHCI ( Run at 5gbps), all 3 ports are capable to charging an iPad
  • Battery recognized with ACPIbatteryManager
  • WWAN HSPA Working with SIM inserted, modded CellPhoneHelper.kext,IOSerialFamily and modded CCL in /Library/ModemScripts/ (tell me if work!)
  • UEFI boot with latest version of CLOVER
  • Sleep, wake, restart and shutdown fully working (10.9.2 seems to resolve this issue)
  • Keyboard. Multimedia keys: Sleep, Prev / Play / Pause / Next (Brightness control with Fn-F8/F9 not work, mapped in DSDT with Fn-K/P)
  • Windows Installation on other SSD partition run fine with VMware Fusion Bootcamp and directly form choose it in Boot selection menù (when you boot with windows you must restore Clover EFI boot option manually in UEFI BIOS to start osx later, because the Micro$oft Boot loader set itself as primary when start  :yes: )

Additional external device:

* NOT working and know problem:

  • Intel Centrino Advanced-N 6205 Wireless adapter( simply no kext exist for this device....)
  • I tried to install mPCI-E Broadcom WLAN used in my old T420s but it's seems not possible to flash modded bios without external programmer. No success with any other methods like tape pin 20 of mPCI-E or placing in second mPCI-E slot.
  • Card reader (Partially working with VoodooSDHC kext, but sometimes system hangs. I removed the SD reader for using Wifi adapter)
  • Brought video from iTunes doesn't play on LVDS device (LCD display attached on VGA on board doesn't support HDCP)
  • WWAN icon in status bar appear only after sleep/wake cycle :huh:
  • Headphone jack sometimes not work after sleep (it's seems to fixing itself after another sleep/wake cycle :blink:)
  • Headphone Volume control 

 

 

 For install use info from T420 thread: http://www.insanelymac.com/forum/topic/285678-lenovo-thinkpad-t420-with-uefi-only/page-25?do=findComment&comment=1952283

NOTE: need to change the SMBIOS hardware section and CustomUUID to your own hardware.

My pack: https://www.firedrive.com/file/9991150C50684CB7

 

I want to thanks all creators of any components used for this test.

 

PS: sorry for bad english  ;) 

 

why couldn't the battery of my device be natively recognised by ACPIBatteryManager? have you done some kind of DSDT patches for Battery? 

 

and i'm also curious how did you rename all the "VID" to "IGPU"? the patches of Rehabman don't work for me...

 

and in additional, which patches did you do to your DSDT? only the ig-platform-id in graphic part and the layout-id in HDEF?

Share this post


Link to post
Share on other sites
hi Demonbane

i used some patches found in Rehab repository, especially the Lenovo Patch x220 and t430u(if you see in patches notes, you read the compatibility for other lenovo product, so after a little research i find that many lenovo products share same chipset, components, maybe same motherboard like t430 and t430s).

i copied and pasted only parts those i think need for my config for example HDA, ig-platform, battery and AC, thermal and fan. i've created and tested many DSDT before find the best.

Then i tell you to study a functional DSDT and find/replace the parts who interest you or using the patches on the repository.

 

For example, if you have a T430s (like me) you can use the DSDT parts of T430 with the same specification, or copy and replace the parts you need, like ALC269 (audio) or HD4000 (video) that are used in T430 and T430s model.

Share this post


Link to post
Share on other sites

 

hi Demonbane
i used some patches found in Rehab repository, especially the Lenovo Patch x220 and t430u(if you see in patches notes, you read the compatibility for other lenovo product, so after a little research i find that many lenovo products share same chipset, components, maybe same motherboard like t430 and t430s).
i copied and pasted only parts those i think need for my config for example HDA, ig-platform, battery and AC, thermal and fan. i've created and tested many DSDT before find the best.
Then i tell you to study a functional DSDT and find/replace the parts who interest you or using the patches on the repository.
 
For example, if you have a T430s (like me) you can use the DSDT parts of T430 with the same specification, or copy and replace the parts you need, like ALC269 (audio) or HD4000 (video) that are used in T430 and T430s model.

 

 

thanks bro,

 

did you meet such kind of problem: if the laptop get sleeping, then wake up and reboot, the laptop will stuck at the initial of GUI... i should force the laptop to shutdown by pressing the power button, then the it become normal again... seems there're problems with sleep.

 

PS: i didn't use all your stuffs, because there's problem with the graphic card. the GUI is much larger as the resolution, as the screen is exploded...

Share this post


Link to post
Share on other sites

thanks bro,

 

did you meet such kind of problem: if the laptop get sleeping, then wake up and reboot, the laptop will stuck at the initial of GUI... i should force the laptop to shutdown by pressing the power button, then the it become normal again... seems there're problems with sleep.

 

PS: i didn't use all your stuffs, because there's problem with the graphic card. the GUI is much larger as the resolution, as the screen is exploded...

Hi

I've encountered this problem with an old version of UEFI firmware.

Update fw and retry, by my experience it solve many kind of problem, like sleep and nvram persistence.

 

For resolution you need to patch framebuffercapri and edit DSDT to reflect your ig-platform.

Share this post


Link to post
Share on other sites

why couldn't the battery of my device be natively recognised by ACPIBatteryManager? have you done some kind of DSDT patches for Battery? 

 

and i'm also curious how did you rename all the "VID" to "IGPU"? the patches of Rehabman don't work for me...

 

and in additional, which patches did you do to your DSDT? only the ig-platform-id in graphic part and the layout-id in HDEF?

 

I have re-apply some new patches from Rehabman and get mixed up many patch for Battery, Sleep / Shutdown ... stuffs from tluck, some section need to specified patch caused it not work like T420.

 

I was keep VID in last DSDT but was changed all to IGPU for apply patches from Rehab repo.

 

For HD4000, it is fine with last patch (with binary patch also), but now I'm using Nvidia most of time as it is only way to make miniDP work well (with Dell external monitor)

 

I will attach my new package soon, included 10.9.x and 10.10. Same DSDT can be used for both OS X versions.

Oh, forgot to mention that since I not used Intel HD4000 so I was not intent to fix QE/CI for it atm. I will rework on it after Apple release the final version (in this month).

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By tragediana150
      Hi everyone!
      Long time no see guys!
      As you can see I am not new user of Insanely and do not want to post in incorrect section, but I can not find any similiar topic at all. I,ve searched the forum and the web and I can't find a solution.
      My question is that is there any possibility to install Mavericks 10.9.5 on external drive on the newest Macbook Pro 13 from 2018? I know that the Intel Coffee Lake is new generation of CPU's and there is no drivers in Mavericks system to run this CPU, but I was thinking about it alot and I decided to write here. Because if we can install all the newest OSX, macOS on older machines then maybe we can install older systems on newer builds?
       
      P.S. If I wrote in incorrect topic then please move this thread to the right section, I will be grateful
    • By k.panic
      Hi to all!

      I've installed Yosemite on:
      - i5 4690
      - ASRock H87M Pro4 (with intel ethernet I219-V) (IntelMausiEthernet, AppleIntelE1000 and RehabMan for I219V kexts)
      - 8gb ddr3 RAM
      - 1tb hard disk
       
      If I disable I219-V from BIOS, when I shutdown it, don't reboots (tested with all kexts)
      If I enable I219-V from BIOS, when I shutdown it, the system reboots.
       
      How can I fix this? Thanks!
    • By fusion71au
      This is a brief guide on how to create a vanilla El Capitan (also same process for Sierra) OS X Installer USB with an updated prelinked kernel containing FakeSMC.

      It is tailored for those users who want to understand the “nuts and bolts” of how to create an installer and also to help brush up on their terminal skills (rather than have one made for them with the numerous automated “tools” available or even Apple’s createinstallmedia) :
       
       
      Specifically, it is also a “Proof of Concept” which shows that installation is possible without even having to rely on boot loader kext injection.

      Prerequisites
      Existing Yosemite installation (or Mavericks - see post#4 for steps 7,8) “Install OS X El Capitan.app" downloaded to the Applications folder Pacifist FakeSMC.kext - Slice or Kozlek branch Bootloader - Clover or Chameleon 8GB or larger USB drive (16GB recommended), formatted HFS+ (MBR or GUID) named “Installer”  
      Procedure
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Open OS X terminal and type the following lines, followed by <Enter> after each line.
          The image restore and file copying may take a while to complete, and at the end of the process, the Installer volume is renamed to “OS X Base System"....
       
      sudo -s hdiutil attach /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/SharedSupport/InstallESD.dmg asr restore -source /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg  -target /Volumes/Installer -erase -format HFS+ -noprompt -noverify rm /Volumes/OS\ X\ Base\ System/System/Installation/Packages cp -av /Volumes/OS\ X\ Install\ ESD/Packages /Volumes/OS\ X\ Base\ System/System/Installation cp -av /Volumes/OS\ X\ Install\ ESD/BaseSystem.dmg /Volumes/OS\ X\ Install\ ESD/BaseSystem.chunklist /Volumes/OS\ X\ Base\ System diskutil unmount /Volumes/OS\ X\ Install\ ESD exit 3.  Right click on the “OS X Base System” Volume and click “Get Info”
       

      4.  Click on the lock icon and untick “Ignore ownership on this volume”
       

      5.  Extract/Copy the El Capitan Kernels folder into /System/Library/ of the USB with Pacifist.  NB It is found in the "Essentials.pkg" in /System/Installation/Packages
       

      6.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel —> OG.prelinkedkernel
       

      7.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of the installer USB using Finder.
       

      8.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel…..
       
      sudo -s chmod -R 755 /Volumes/OS\ X\ Base\ System/Library/Extensions chown -R 0:0 /Volumes/OS\ X\ Base\ System/Library/Extensions touch /Volumes/OS\ X\ Base\ System/System/Library/Extensions kextcache -u /Volumes/OS\ X\ Base\ System exit Any errors should be noted but the output below is normal e.g.


      9. Install your Bootloader targeting the OS X Base System volume
       
       
       
       
      10.  Boot your system with the USB without injected kexts into the OS X Installer GUI....
       
       
       
       
       
      Post Install
      The original prelinked kernel in a fresh install of El Capitan will also lack FakeSMC ie it will only be linked to Apple signed kexts.  In order to boot into El Capitan the first time around without boot loader kext injection, the PLK needs to be rebuilt for the El Capitan volume like we did for the installer:
       
      1.  Boot into Yosemite with the kext-dev-mode=1 boot flag
      2.  Delete or Rename the original /System/Library/PrelinkedKernels/prelinkedkernel for the El Capitan volume —> OG.prelinkedkernel
      3.  Copy FakeSMC.kext and other necessary kexts (e.g. VoodooPS2Controller.kext for laptops) into the /Library/Extensions folder of El Capitan using Finder
      4.  Back in terminal, type the following lines, followed by <Enter> after each line to rebuild the prelinkedkernel.  In this example, the El Capitan volume is named "El_Capitan" - change if you have named it something else...
      sudo -s chmod -R 755 /Volumes/El_Capitan/Library/Extensions chown -R 0:0 /Volumes/El_Capitan/Library/Extensions touch /Volumes/El_Capitan/System/Library/Extensions kextcache -u /Volumes/El_Capitan exit 5. Install your Bootloader targeting the El Capitan volume.  This step is only necessary if you are installing El Capitan on a new drive without existing boot loader (not required if installing on a disk with existing boot loader beside Yosemite).
      6. Reboot your system without injected kexts into El Capitan!
       
       
      Other links
      The All-In-One Guide to Vanilla OS X for beginners
       
      Updates for Sierra and High Sierra   Custom Prelinkedkernel Generator Tool I have made a custom prelinkedkernel generator "PLK.tool" for Sierra + El Capitan.  Instructions:   1.  Download and extract the attached BaseSystem_PLK.tool.zip into your ~/Downloads folder.   2.  Copy any extra kexts necessary for booting your hack to ~/Downloads/BaseSystem/ExtraKexts (e.g. FakeSMC, VoodooPS2Controller), making sure SIP is disabled. 3.  Copy BaseSystem.dmg to ~/Downloads/BaseSystem  4.  Open terminal and run the following commands... cd ~/Downloads/BaseSystem chmod +x PLK.tool ./PLK.tool ---> supply your admin password ---> will place your new custom prelinkedkernel on the desktop.       macOS High Sierra bypass Firmware and MBR checks in post#13.
      BaseSystem_PLK.tool_ElCap.zip
      BaseSystem_PLK.tool_Sierra.zip
      BaseSystem_PLK.tool_Mojave.zip (need to run in Mojave to avoid dependency errors)
      BaseSystem_PLK.tool_Catalina.zip
       
    • By ludufre
      Installing macOS Mojave on Lenovo ThinkPad L440

       
      There are two version of this laptop:
      - 20AS = Chipset QM87, without Express Card (mine).
      - 20AT = Chipset HM86, with Express Card.
      I strong believe is the same thing...
       

      Changelog:
       
      06/09/2019 14:16h GMT-0
      - Added missing parts in the post-install step. 
       
      06/04/2019 17:19h GMT-0
      - Updated Clover link. 
       
      06/02/2019 18:08h GMT-0
      - Added info about update 10.14.5. 
       
      03/13/2019 13:15h GMT-0
      - Updated info about touchpad replacement and CPU and 4G LTE modem.
       
      02/05/2019 18:47h GMT-0
      - Updated info about CPU replacement and 4G LTE modem.
       
      02/04/2019 15:24h GMT-0
      - Sometimes the VoodooHDA.kext doesn't work.
      - Added AppleHDADisabler.kext to fix that (attached bellow).
       
      01/24/2019 14:42h GMT-0
      - Added more adjustments to use of VoodooHDA.
      - Updated VoodooHDA links to 2.9.1 official (without installer).
      - Changed PCM volume from 90 to 180 in Info.plist (attached modified VoodooHDA.kext bellow)
      - Updated SSDT-L440.aml (Removed HDEF and HDAU, not needed).
      - Updated config.plist (Changed to user Audio layout to 1).
       
      01/22/2019 20:47h GMT-0
      - I gave up on the AppleALC.
      - Headset does not work.
      - Now with VoodooHDA is perfect and the sound even louder.
       
      01/22/2019 14:37h GMT-0
      - Added info about update 10.14.3. 
       
      01/22/2019 13:46h GMT-0
      - Added link to BIOS reassing guide.
       
      01/20/2019 11:49h GMT-0
      - First version.
       
      What works and what does not
       
      - Processor: Intel Core i5-4300M ->  Work. All SpeedStep stages.
      - Video Card: Intel HD4600 ->  Work. QE/CI and Metal.
      - Chipset: Intel QM87 ->  Work.
      - Mini DisplayPort ->  Work. But no audio, yet.
      - VGA ->  Not work. Normal.
      - Audio: ALC292 ->  Work.
      - WiFi/Bluetooth: Intel AC 7260 ->  Not work. Replaced with DW1560 (need whitelist removal).
      - Ethernet: Intel I217-LM ->  Work.
      - Card Reader: Realtek RTS5227 ->  Not work.
      - Keyboard and Touchpad ->  Work.
      - Webcam ->  Work.
      - Fingerprint Reader ->  Not work. Normal.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
      - Airdrop, Handoff, Instant Hotspot and Continuity ->  Work after replaced wireless.
       
       
      Extras
       
      - FullHD 1920x1080 display upgrade: 
      Replaced with AU Optronics B140HAN01.1 30pin eDP (B140HAN01.2 and B140HAN01.3 also compatible).
      Apparently same screen as Dell Latitude E6440, E7440, Lenovo Ideapad U430 and E129.
       
      - CPU upgrade:
      Replaced the stock Intel Core i5 4300M 2.6Ghz (3.3Ghz turbo) 6M cache with Intel Core i7 4700MQ 2.4Ghz (3.4Ghz turbo) 6MB.
      I initially had problems with overheating. The processor ran at full load above 90 degrees.
      After using a quality thermal paste I can work between 70 and 80 degrees.
      Acceptable taking into consideration that the new processor has 47TDP versus 37TDP which is recommended.
      I also had no problem consuming the battery while charging. The original 65W source seems to have figured out.
       
      - Touchpad upgrade:
      Replaced the stock with T460 touchpad.
      This is serious: you have to do it! It should be stock. Touchpad with precision and absurd quality!
      Just do it!
       
      - RAM upgrade:
      No mistery here. Just upgade.
       
       
      Todo
       
      - Make DP audio work.
      - Make Card Reader work.
      - Upgrade CPU to i7-4712MQ (Ordered. It's on the way) Done, but received i7-4700MQ (47w TDP, with good paste I have no overheating)
      - Replace touchpad with T460 model (Ordered. It's on the way) Done. Sensitivity and perception of quality much better. I recommend 100%!
      - Sierra Gobi5000 4G LTE modem EM7355 (Ordered. It's on the way. I hope works. ) Done, but not work. Recognize but not connect. I already gave up...
      - Upgrade to 16GB RAM Done
      - Make trackpad appear in System Preferences
       
       
      What you need to install

      - Running install of macOS
      - One USB flash drive of 8GB or bigger
      - macOS Mojave install app
      - Clover EFI
      - Clover Configurator
      - Some KEXTs and SSDT patches


      How create create the install flash drive
       
      Prepare install flash drive

      Format the flash drive with GUID partition mapping and name it "Install".

      - Open Disk Utility.
      - Click in View, then "Show All Devices".
      - Select the destination flash drive, then Erase.
      - Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
       
      Create install flash drive

      Open terminal and run this command:
      sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/Install --nointeraction This will take about 30 minutes.
       


      Install bootloader

      Download the CloverEFI from SourceForge (used 4934) and install with this options on "Install macOS Mojave":
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - UEFI Drivers - ApfsDriverLoader-64
      - UEFI Drivers - AptioMemoryFix-64


       
       
      Make things works

      Will be created a partition named EFI and mounted in Desktop.
      - Replace the /Volumes/EFI/CLOVER/config.plist with mine attached below
                    If you have modded BIOS with Advanced Menu and enabled 128MB DRAM-prealloc use 128MB_DRAM-prealloc_config.plist.zip
                    If no, then use 32MB_DRAM-prealloc_config.plist.zip
      - Put SSDT-L440.aml attached below in /Volumes/EFI/CLOVER/ACPI/patched/
       
      Generate your Serial, MLB and SmUUID
       
      - Open the replaced config.plist with Clover Configurator (used 5.3.2.0)
      - Go to SMBIOS, click few times in "Generate New" in Serial Number and SmUUID.
       
      Download those Kexts and put in /EFI/CLOVER/kexts/Other/
       
      - Download the HWSensors 3 from here. I used the FakeSMC.kext, ACPIMonitor.kext and IntelCPUMonitor.kext inside of DMG version r196.
      - Download the VoodooPS2Controller.kext from here. I used version 2018-1008.
      - Download the IntelMausiEthernet.kext from here. I used the version 2018-1031.
      - Download the Lilu.kext from here. I used the version 1.3.6.
      - Download the VoodooHDA from here. I used the version 2.9.1 and patched the sound volume (attached below).
      - Download the WhateverGreen.kext from here. I used the version 1.2.9.
      - Download the AppleBacklightFixup.kext from here. I used the version 2018-1013.
      - Download the USBInjectAll.kext from here. I used the version 2018-1108.
      - Download the ACPIBatteryManager.kext from here. I used the version 2018-1005.
       
      - Download the VirtualSMC.kext from here. I used version 1.0.2. Replaced with FakeSMC of the HWSensors 3 r196 package.
      - Download the FakeSMC.kext from here. I used the version 2018-0915. Replaced with VirtualSMC.kext due 10.14.4 issues on update.
      - Download the AppleALC.kext from here. I used the version 1.3.4. Replaced with VoodooHDA.kext due mic not working.
       
       
      Wifi and Bluetooth (DW1560 / BCM94352Z)
       
      Unfortunately, some notebook manufacturers are currently blocking the replacement of wireless cards. They want you to only use the models sold by them. And of course, none of them from Lenovo for this notebook model is compatible with MacOS.
       
      If you try to start with an unauthorized wifi card for them, you will receive a screen error:
      1802: Unauthorized network card is plugged in - Power off and remove the network card. Since this check is done directly in the BIOS, the only solution is to modify it.
      But since nothing is easy in this life, there is one small big problem:
      - The BIOS update procedure does not allow you to use modded files as it used to be.
      - You will need to physically reach your BIOS on the motherboard and make use of a USB BIOS reader/writer.
       
      So what you need to do:
      1. Disassembly your laptop;
      2. Dump your BIOS with an USB BIOS reader with SOIC8 clip (to not desolder from the motherboard);
      3. Patch it (In addition to removing the whitelist, add the advanced menu);
      4. Fix RSA signature;
      5. Reflash BIOS;
      6. Replace wireless card;
      7. Remount your laptop;
      8. Done.
       
      Soon, I'll provide step by step in this process. Probably until end of this week.
      In the meantime, if you need to, send me your dump that I do steps 3 and 4 for you.
      I also add the Advanced Menu so you can increase to 128MB the DRAM-prealloc.
       
      To fix a Modded BIOS to remove the 5 beeps on boot, you need this guide: https://www.insanelymac.com/forum/topic/337333-guide-fix-insyde-h2o-bios-signature-5-beeps-on-lenovo (traduzido: pt-BR)
       
       
      After replaced the wireless card. Download those Kexts and put in /EFI/CLOVER/kexts/Other/
       
      - Download the AirportBrcmFixup.kext from here. I used the version 2.0.0.
      - Download the BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext from here. I used the version 2018-0505.
      - Download the BT4LEContinuityFixup.kext from here. I used the version 1.1.2.
       
       
      Now you can start the instalation without problem (I guess).
       
       
      How install
       
      UEFI Setup Configuration and Installation

      UEFI configuration
       
      My BIOS is the latest: 1.93 (J4ET93WW) 

      - Shutdown and insert the flash drive.
      - Power on with F1 pressed to enter BIOS setup.
      - Change value: Config - Intel(R) AMT - Intel(R) AMT Control to DISABLED
      - Change value: Security - Security Chip to DISABLED
      - Change value: Security - Anti-Theft - Intel(R) AT Module Activation to DISABLED
      - Change value: Security - Anti-Theft - Computrace to DISABLED
      - Change value: Security - Secure Boot to DISABLED
      - Change value: Startup - UEFI/Legacy Boot to BOTH, Legacy First and CSM Support = Yes
      - Save & Exit Setup (F10)
       
      - Now, hold the F12
      - In the list, select your flash drive.
       
      The installer will start. 
      
      Format destination disk

      Format the disk with GUID partition mapping and name it "Macintosh".

      - Select Disk Utility in the list, then press Continue.
      - Click in View, then "Show All Devices".
      - Select the destination Disk, then Erase.
      - Name: HD, Format: APFS and Scheme: GUID Partition Map

      Close Disk Utility.
      
      Select "Install macOS", then Continue.
      Follow instructions in screen.

      After install

      After first part install the system will reboot. Maybe you have to press F12 again and select the flash drive.
      
      The second part of the installation will begin. This will take 16 minutes.
       

      Post installation

      Install bootloader
       
      When the second part of install finish, the system will reboot again.

      After performing the user initial setup and go to the desktop, you need to install Clover on internal disk.

      Open the Clover installer inside flash drive that you copied before.

      Use same options above but choose the system partition this time.

      Now you need to replace the EFI folder inside your destination disk EFI parittion, with EFI folder inside flash card EFI partition.

      If the flash drive EFI partition of your destination disk or flash drive is unmounted:
      Mount with terminal "sudo diskutil mount /dev/rdiskXs1". To know what X is, use "diskutil list", most likely is 0 for destination disk and 1 for flash drive.
       
      Then, eject the flash drive.
       
      Last step
       
      Move all Kexts from EFI partition to /Library/Extensions, with those commands in Terminal:
      sudo mv -R /Volumes/EFI/EFI/CLOVER/kexts/Other/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i / Restart the system.
       
       
      It's done!
       
       
      Updates
       
      System update 10.14.3
       
      - Updated with success;
      - Everything works perfectly after reboot;
       

       
       
      System update 10.14.4
       
      - Updated Clover to 4910.
      - Updated Lilu.kext to 1.3.5 and WhateverGreen to 1.2.7.
      - After first reboot the update progress stoped with:
      GTrace synchronization point 4 Unsupported CPU Unsupported PCH hmm.. mismatch sizes: 3100 vs 20 It was still possible to start the previous installation, selecting "Macintosh" as opposed to "macOS Install" in Clover.
      So I created a flash drive with Clover 4910 and put only my config.xml, SSDT-L440.aml, the updated Lilu.kext and WhateverGreen.kext. And I decided to test VirtualSMC instead of FakeSMC.kext.
      With this I was able to install update 10.14.4. After installation I can boot normally, even with FakeSMC.kext that already in /Library/Extensions.
      I do not know what exactly happened, but now works everything like was previously.
       


       
       
      System update 10.14.5
       
      - Updated Clover to 4934.
      - Updated Lilu.kext to 1.3.6 and WhateverGreen to 1.2.9.
      - After first reboot the update progress stoped again (like 10.14.4 update) with:
      GTrace synchronization point 4 Unsupported CPU Unsupported PCH hmm.. mismatch sizes: 3100 vs 20 It was still possible to start the previous installation, selecting "Macintosh" as opposed to "macOS Install" in Clover.
      I decided to rollback to FakeSMC.kext but this time with the version of HWSensors 3. Link above.
      With this I was able to install update 10.14.5. After installation I can boot normally.
       

       
       

      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas, @Shiki and all others members involved directly or indirectly.
       
       
       
       
       
       
      32MB_DRAM-prealloc_config.plist.zip
      128MB_DRAM-prealloc_config.plist.zip
      SSDT-L440.aml
      VoodooHDA.kext.zip
      AppleHDADisabler.kext.zip
    • By gengik84
      Ciro82==>>Thanks
      Uno dei tre Requisiti:
      Hack funzionante Mac vero Macchina virtuale Impostazioni Bios per il boot:
      Cercate una voce  del tipo “Sata Mode”e settatela  in AHCI
      Secure Boot: disabilitare o altri sistemi operativi
      CSM: UEFI o LEGACY, oppure a secondo del tipo di installazione
      VT-x / VT-d disable
      *Nota: Secure boot e csm valido solo per bios UEFI
      Materiale Occorrente 
      "OS X (Versione App.Store)”
      USB 8GB  *nota: nel caso di usb superiori dovrà essere partizionata, in modo da avere una partizione su cui "lavoreremo,di questa dimensione
      ShowAllfiles 
      kext Wizard 
      Bootloader Clover_2.3k_r xxx:                   http: //sourceforge.n.../cloverefiboot/
      Clover Configurator:                                    http: //mackie100proj...a.org/download/
      FakeSmc.kext:                                            https://github.com/kozlek/HWSensors/releases
      In allegato,a fondo pagina troverete un "pacchetto" contenente : ShowAllfiles, Kext Wizard, FakeSmc.kext: 
      App alternative:
      ESP Mounter Pro: per montare la partizione EFI
      Vi illustrerò tre metodi per creare la usb, ma sono ben distinti… quindi usatene soltanto uno
      Metodo 1: “Install Mac_OS_X.command” Metodo 2: “Create Install Media di Apple” Metodo 3:  Metodo Manuale Alla fine delle preparazione dell’installer, tutti i metodi necessitano l’installazione del Bootloader Clover sulla a vostra USB.
      “CONDIZIONI OBBLIGATORIE”
      PUNTO 1: che la vostra usb sia stata preventivamente nominata USB (caratteri maiuscoli) Tabella di partizione GUID e la formattazione in  Mac esteso Journaled.
      PUNTO 2: che l’installer di OSX si trovi in Applicazioni
      Utility Disco 
      Selezionate la pendrive, andate su “partizione”, selezionate “1 partizione”, impostate Mac OS esteso journaled e date il nome USB, poi in basso cliccate su opzioni e scegliete Tabella partizione (GUID), poi “applica”.
      Immagine 
      Riporto nuovamente l’operazione sopra citata adoperando dal nuovo Utility Disco introdotto su El Capitan.
      Rimane ovviamente invariato nome della usb in ==>> USB (maiuscolo), la formattazione in Mac esteso Journaled e sia la mappa partizione in GUID
      Da utility disco selezionate la usb, cliccate su inizializza.
      dal menù a tendina scegliete la relative impostazioni
      Immagine  
      Procedura effettua da High Sierra è la stessa della precedente, l'unica attenzione e operazione da aggiungere in primis  è cliccare nel menù a tendina in alto sulla sinistra di utility disco e selezionare "mostra tutti i dispositivi"
      Immagine 
       
      =====================
        METODO 1: "Install_Mac_OS_X.Command" Lo script che trovate allegato in fondo alla guida permette la creazione dell’installer in maniera automatica
      Include la possibilità di scelta di tre versioni di osx
      Yosemite El Capitan Sierra Il risultato finale è come quello del metodo "manuale" descritto nella guida, per cui l'installazione avverrà in un solo passaggio, non in due come con il metodo createinstallmedia. 
      Offre inoltre la possibilità di inserire un kernel patchato, utile, per esempio, per chi usa AMD.
      Rimane invariato il nome dato alla usb in USB, mappa partizione e tipo di formattazione
      Se la vostra usb non sarà rinominata nel modo corretto, verrete avvisati dal terminale, quindi non dovrete far altro che apportare la relativa modifica e rilanciare nuovamente lo script
      Esempio
      ===========================
      Metodo 2 
      L'intento è quello di usare la procedura fornitaci direttamente da Apple, "createinstallmedia", introdotta  con Mavericks. 
      Tale metodo prevede l’uso del terminale che via via se ne sta perdendo il “valore e l’uso”
      Inizialmente per i neofiti potrà sembrare problematico ma alla fine non è così.
      Durante il post installazione alcune operazioni ne richiedono l’ uso.
      Perciò mi sono chiesto perchè, qualora uno volesse, non far conoscere da subito un po’ questo “strumento”???
      Per favorirvi vi ho allegato i comandi già  “pronti”, i quali li potrete copiare ed incollare sul terminale.
      A questo punto aprite il terminale, copiate ed incollate il comando sottostante e premete invio, digitate la vostra password e premete nuovamente invio.
      Comando per creare USB con Yosemite:
      sudo /Applications/Install\ OS\ X\ Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ OS\ X\ Yosemite.app --nointeraction  
      Comando per creare USB con El Capitan
      sudo /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ OS\ X\ El\ Capitan.app --nointeraction Comando per creare USB con Sierra 
      sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ macOS\ Sierra.app/ --nointeraction Per creare USB con Hight Sierra o Mojave usate --> C_I_M (aggiornato per 10.14)
       
      Funziona con il drag & drop sul terminale, in questo caso non vi è necessità che la usb sia nominata in un determinato modo ed essendo basato su create install media ovviamente funziona da 10.9 a 10.14.... 
      BENE…IL PROCESSO DI CREAZIONE E’ INIZIATO…
      AVREMO CIRCA 20/30 MINUTI DI TEMPO LIBERO A CUI DEDICARSI A CIO’ CHE VOGLIAMO………………………………………..  
      COLGO L’OCCASIONE PER FARVI NOTARE LA VELOCITA’ E LA SICUREZZA DI QUESTO METODO
      CONFRONTATE QUESTO CON IL TERZO METODO E NOTERETE CHE CON UN SOLO PASSAGGIO, OSSIA IL COMANDO DATO AL TERMINALE, FACCIAMO IN UNA SINGOLA OPERAZIONE TUTTI I VARI STEP DESCRITTI SULL’ ALTRO METODO.
      DETTO QUESTO, MOLTO IMPORTANTE E’ SOTTOLINEARE CHE COSI’ FACENDO EVITEREMO ERRORI  DI DISTRAZIONE RIGUARDO AI PASSAGGI O FRAINTENDIMENTI.
      Immagine 
      Potete adesso passare ad installare il bootloader Clover sulla vostra usb.
      *NOTA*:
      Avendo usato questo metodo l'installazione si dividerà in due fasi, perciò dopo il primo riavvio e necessario far partire nuovamente l'installer, selezionare lo stesso disco senza formattarlo.
      Finita questa ulteriore fase , l'installazione sarà terminata
      =========================
      METODO "MANUALE"....  (lascio per futura memoria-Compatibile fino a 10.12)
      ==========================
      Bootloader
      **Nota:** Installazione in UEFI  dipenderà dalla scheda madre in vostro possesso, quindi se non supporta tale opzione , il bootloader dovrà essere installato in  modalità Legacy.
       Vi invito, qualora non sapeste questa informazione, a recarvi nel sito ufficiale del produttore e controllare le informazioni a riguardo
      Fatto questo dobbiamo installare  Clover sulla usb.
      A seconda del tipo di Bios o al tipo di installazione che vogliamo fare UEFI o Legacy avremo ovviamente configurazioni diverse in questa fase.
      Lanciate il pkg.
      Immagine 

       
      Cambiate la destinazione di installazione ad USB oppure Install Mac_OS_X (a secondo del tipo di creazione eseguita)
      Successivamente clicchiamo su "Ad Hoc"
      Per Installazione UEFI
      Mettete i flag   : Installazione solo per avvio UEFI
                               : installare Clover nella ESP
                               : Driver64UEFI  AptioMemory --> (consigliato) 
                               : Driver64UEFI  ApfsDriverLoader --> (consigliato) --> sostituisce l'uso del driver apfs.efi
                               : Selezionate l'altri driver come da successiva immagine,
       
      *Nota: Altri driver che si possono usare  al suo posto  sono:
       informazioni 
       
      Proseguite con l’installazione.
      Immagine 
      ** Ricordate che avrete accesso a questa cartella dopo aver montato la partizione EFI**
      ===========================
      Per installazione Legacy
      Immagine 
      ===========================
      Impostazione per config.plist:
      Con clover configurator “montate” la partizione EFI della usb.
      1) Per fare questo nel menù di sinistra, cliccate su “Mount EFI”
      2) individuate la partizione relativa alla vostra usb, a questo punto montiamo la relativa partizione EFI  selezionando l’apposito pulsante “Mount Partition”
      Immagine 
      3) Successivamente cliccate su “Open Partition”.. recatevi in EFI/Clover ed aprite il config.plist
      4) Sezione ACPI: Disabilitate tutti i fix sia del menù 1 che del menù 2
      Immagine 
      5) Sezione BOOT: Sole se si sta installando Yosemite mettete il flag su kext-dev-mode=1
      Immagine 
      6) Sezione RT Variables: Se si sta installando El Capitan oppure Sierra, aggiungere i valori: BooterConfig= 0x28, CsrActiveConfig= 0x67
      Immagine 
      7) Sezione System Parameters: Su inject kext mettete YES
      Immagine 
      ===========================
      Nota: Su El Capitan, è stato introdotto SIP (System Integrity Protection)
      Info:
      ===========================
      Recatevi in EFI/Clover/kext/10.x 
      X= alla versione di osx che state installando. Per esempio se installerete Yosemite dovrete recarvi nella cartella 10.10, con El Capitan in 10.11….ecc
      Se non ci fosse tale cartella, createla e nominatela voi a “modo”.
      Copiatevi all’interno FakeSmc.kext
      *Nota se venite già da altre vostre configurazioni, oltre kext sopra citato ,potete mettere gli altri necessari per il vostro hardware
      Stessa cosa se avete DSDT e/o SSDT potete copiarli in EFI/Clover/Acpi/Patched
      Immagine 
      
      Per High Sierra:
      Scaricare il driver apfs.efi a fine guida, collocarlo:
          --> EFI/clover/Driver64UEFI se stiamo usando UEFI
      --> EFI/Clover/Driver64 se stiamo usando Legacy
       
      Per chi volesse continuare ad usare HFS vi rimando a questo post:
        Come installare High Sierra in HFS direttamente dalla usb  
      Utenti Laptop:  Nel 99% è obbligatorio disattivare la grafica discreta Nvidia/Amd per installare questo nuovo osx
                                     Quindi aggiungete --> SSDT-Disable_DGPU.aml.zip
                                     in EFI/Clover/acpi/Patched della usb
      --------------------------------------------------------------------
      Per Mojave:
      Scaricare il driver apfs.efi per 10.14 a fine guida, collocarlo:
          --> EFI/clover/Driver64UEFI se stiamo usando UEFI
      --> EFI/Clover/Driver64 se stiamo usando Legacy
      Versione di clover non antecedente a V_4015
      Volete usare HFS?
      E' possibile fare un installazione diretta su altro disco o partizione, nel caso può essere usato anche per effettuare aggiornamenti...
      nel caso guardate...
       Mojave in HFS 
       Oppure direttamente da usb  
       
      Fatto questo avrete la vostra USB bootable per installare OSX.
      ………Non scordatevi Fakesmc.kext da mettere nella relativa cartella…. senza il quale non farete mai il Boot......
      *NOTA: se usato il terminale per la creazione della usb, l'installazione si dividerà in due fasi, perciò dopo il primo riavvio e necessario far partire nuovamente l'installer, selezionare lo stesso disco senza formattarlo.
      Finita questa ulteriore fase , l'installazione sarà terminata
      **NOTA** Se avete processori Broadwell,Skylake o Kabylake...usate FakeSmc.kext e relativi sensors che trovate all'interno del secondo pacchetto.. (potete usarlo anche sui precedenti senza problemi, essendo una versione più aggiornata ha ulteriore supporto per le cpu più recenti)
      Update: Fakesmc e sensors versione 6.26
      Post installazione... post #2           
       Buon Hack….. 
      Aggiornamento:Install_Mac_OS_X.command.zip (compatibile da 10.10 a 10.12)
      le info le trovate a questo post
      Ringrazio @Ciro82 che mi ha aiutato nel preparare questa guida.
      Pacchetto.zip
      Pacchetto-2.zip
      Pacchetto-Fake+Sensors 6.26.1440.zip
      C_I_M.zip
       
      apfs.efi-10.14-beta1_No_Log.zip





       

×