Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.


  • Similar Content

    • By k.panic
      Ciao ragazzi,
      ho provato ad eseguire l'installer di Yosemite su un
      Asrock H110 BTC+
      Intel G3900 (con FakeCPUID 0x0306A0 e flag -xcpm)
      GeForce 710
      ma dopo aver raggiunto lo step di "bluetooth transport" mi dà il simbolo del divieto d'accesso.. Cosa sbaglio?
    • By MSzturc
      today I noticed that there is a LED on the F4 Key on the Precision Keyboard ( same as on F1 Key ). Does anyone have a code snippet that shows how to set the LED?
      I've found a solution. The Method SB.PCI0.LPC.EC.HKEY.MMTS controls the LED state. It has one parameter:
      0x00 - LED is off
      0x02 - LED is on
      0x03 - LED is blinking
      I've build a LED toggle for my Thinkpad T460. Who wants to give it a try could find my source here
    • By MSzturc
      Hello everyone!
      I know that a lot of you are using a Lenovo Thinkpad as Hackintosh. For those i've created an Assistant Application that allows you to use all your Function Keys on your Laptop. It should be compatible to all T-, R-, X- and E-Series Models with the right Keyboard mapping.
      Fn+F4: Mute / Unmute Microphone Fn+F7: Screen mirroring / Screen extending Fn+F8: Activate / Deactivate Wi-Fi Fn+F9: Open System Preferences Fn+F12: Open Launchpad  
      Download & Changelog
    • By Alex009988
      Hello. I am often enquired about my Acer Aspire 8942G. So I decided to create a topic about this deal.
      I use MBR and Mavericks is installed on the second hard disk, which have two partitions. One with Mavericks, the second with NTFS-partitions.
      I prefer to install(restore) mac with the help of R-drive image under Windows. But it don't means that you must do so either. Do as you prefer
      Note. Usually people start with Chameleon. You should use only two extra kexts, namely FakeSMC and NullCPUPowerManager for the first start.
      And use these keys at the Chameleon -v -f GraohicsEnabler=No
      Necessary kexts(patched kext and hackintosh kext
      Note; S/L/E means System/Library/Extensions I have written it as it occasionally confuses the beginners
      Note 2; you can find driver for LAN and sound from previous system here
      Graphics, DSDT and FaakeSMC, AppleHDA
      1) This patched Framebuffer we use
      Personality: AlouattaConnectorInfo count in decimal: 4Disk offset in decimal 5913920000000 02 00 00 00 40 00 00 00 09 00 00 00 10 00 00 04 - LVDS0000010 00 04 00 00 04 07 00 00 00 00 00 00 12 04 01 02 - DP0000020 00 08 00 00 04 02 00 00 00 00 00 00 11 02 02 01 - HDMI0000030 10 00 00 00 10 00 00 00 00 00 00 00 00 10 03 03 – VGA0000040 Plus you have to use GraphicsInjector or the best solution as I think is VideoBios within DSDT. Only with this method, "Display Sleep" works(I've already give the DSDT with that)
      2) My dsdt is big, and it start up many of the equipment. I think it is enough had so as to improve something else, as it were. But you can suggest to me some correction.
      For instance, some optimization and so on
      Note, if your Acer doesn't boot with my DSDT, than it happens you use a little bit another model with small distinction, For example another processor such as Core i5 instead of i7. It happens because the addressing differs from mine at one place of the DSDT,
      Find and correct it, on your DSDT. If you encounter this problem, write about here if you cannot cope with that on you own.
      PS I have the DSDT from Acer Asoire 8942G which has Core i5, but I don't lay it out because it is old a little and I should finish it in this case.
      3) FakeSMC
      I attached correct the Fake for our laptops, it emulates not only SMC, AppleHDAHardwareConfigDriver and ApppleGraphicsPowerManager(correct id) are being put right as well.
      It also detects many sensors by means of HWSensors, the other sensors I wasn't be able to make it as it is super very hard but possible. You can read this topic just for the interest
      4) See here what patches what made for AppleHDA
      Settings of bootloaders. Chameleon, XPC, bareBoot and Clover
      You can find settings of bootloader at the folder Extra_files
      Note; you must past your serial number. You can use Chameleon Wizaed for it.
      Note 2; With Chameleon you should make patch of all kexts manually, in Clover and bareboot these patches are writhen at their settings in order to not repatch drivers after each update.
      Though you must replace AppleSmartBatteryManager after each update
      Note 3, As you can see at the XPC I use all patches except for Graphics patch. For some reasons, Graphics patch doesn't work at xpc. Hope that developer of this bootloader will solve the problem soon. As a consequence, I make patch of AMD5000Controller manually with the help of hexedit.
      That we replace on
      These two files are necessary for VoodooPS2Controller, and should be founded in indicated folders
      Here is edid, you can use DisplayProductID or DisplayNergeNub, Although being together, they mustn't hinder each other.
      See more exactly here
      Strugle with out-of-work DVDPlayed caused by BatteryKext
      Unsolved problems
      1) Glimmer on LDVS
      2) Pops durings waking up with AppleHDA, it happens only in Mavericks
      3) VoodooSDHC no longer works completely, at the Mavericks. At the Mountain Lion, it works very buggy.
      4) Small spam at the kernel log made by the SmartBattery.
      5) Some indicators. Indicator of wifi doesn't work completely. Touchpad indicator can be only switched on/off under Windows.
    • By DavideNovice
      Dear All,  first of all sorry for any silly question but I am new in the apple environment.   
      I have a bootable USB containing Mojave 10.14 already installed,  this USB boot from my normal PC (MBO : MSI Z97 G7,  CPU:I7 4790K, GPU:GTX108 Ti, STORAGE:SSD 860 Samsung), but I would like to instal on a old server SUPERMICRO (MBO :X8DTN+-F , CPU 2 x XEON X5680 , GPU : GTX1070TI, STORAGE: SSD 850 SAMSUNG 500GB) . 
      The problem is that the SUPERMICRO BIOS (altredy updated) do not support UEFI but only LEGACY, for this reason my USB key does not boot. 
      Is there any way in which I can use this key (even cloning on a new one) to obtain a bootable for LEGACY PC ?  
      I am not able to build another key since I bought this key already done last year, and I do no have enought skill to download Mojave, Clover, Clover config, etc. .. to make a new bootable usb..  If someone can help me I will be very grateful. 
      Thanks in advance