Jump to content
Andrea Z

Switchable Graphics Problem 10.8.2

7 posts in this topic

Recommended Posts

Hi to everyone, 

I'm trying to install iATKOS ML2 on an HP G62 with the switchable graphics card.

Everything seems fine except this:

if I boot with GraphicsEnabler=No, the PC boots up, in system info it shows an unknown ati gpu with no kext loaded, no QE CI and everything is laggy. But at least all the rest works fine.

if I try to boot with GraphicsEnabler=Yes, it shows the attached errors.

I'd like to totally kill the Radeon card, I'd be happy to use just the integrated Intel HD gpu, but I tried million ways (changing DSDT, kext's and all the possible boot flags..) without success.

What could I do?

Thanks for your help

 

UPDATE:

I tried changing the booting frame buffer using the flag AtiConfig followed by the name (ex. Langur).. Still nothing.. I always get the same error.

My CPU is an Intel i3 M350 and the Radeon is a 6370M.

post-1229411-0-34398100-1382107077_thumb.jpg

Edited by Andrea Z

Share this post


Link to post
Share on other sites
Advertisement

Is your GPU 5470m or 6370m ? I thought HP G62 comes with 5470m ! 

6370m, I just checked... G62 got something like 30 / 40 versions.. I'm hating this.. Got any idea on how to solve this?

I need to enable the flag GraphicsEnabler...

Share this post


Link to post
Share on other sites

6370m that comes with HP 68e4 has aticonfig=Eulemur

Ok, so this is the string I will put in the aticonfig.. What more do I need to do? EDID modifying no?

Update: Radeon Monitor says "Unknown device ID"....

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Mieze
      This project is dedicated to the memory of Mausi, the cat I loved more than anybody else.
       

       
      A few days before Christmas I started my latest project, a new driver for recent Intel onboard LAN controllers. My intention was not to replace hnak's AppleIntelE1000e.kext completely but to deliver best performance and stability on recent hardware. That's why I dropped support for a number of older NICs. Currently the driver supports:
       
      5 Series
      82578LM 82578LC 82578DM 82578DC 6 and 7 Series
      82579LM 82579V 8 and 9 Series
      I217LM I217V I218LM I218V I218LM2 I218V2 I218LM3 100 Series (since V2.1.0d0)
      I219LM I219V 200 Series (since V2.3.0d0)
      I219LM I219V 300 Series (since V2.4.0d0)
      I219LM I219V  
      Key Features of the Driver
      Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). Support for TCP/IPv6 and UDP/IPv6 checksum offload. Makes use of the chip's TCP Segmentation Offload (TSO) feature with IPv4 and IPv6 in order to reduce CPU load while sending large amounts of data (disabled due to hardware bugs). Fully optimized for Sierra (64bit architecture) but should work with older 64bit versions of macOS too, provided you build from source with the appropriate SDK for the target OS. Support for Energy Efficient Ethernet (EEE). VLAN support is implemented but untested as I have no need for it. The driver is published under GPLv2.  
      Current Status
      The driver has been tested successfully with I217V, I218V and 82579V under 10.9.5 and above. The attached archive includes source code as well as a prebuilt binary (debug version) for Mavericks and newer versions of macOS.   Known Issues
      There seem to be problems while using VMware with version 1.x.x of the driver. In case you are affected use version 2.0.0 or newer.  
      FAQ
      Could you add support of for...? Well, you are probably asking me to add support for one of the older NICs like the 82571/2/3/4L or 82583 and the answer will be no as I dropped support for these chips intentionally. They are broken and I lost more than 2 weeks trying to make it work on the 82574L without success. I was asked to add support for I210, I211 and I350 but as these chips have a completely different architecture, which isn't supported by the underlying Linux driver, this is impossible, sorry. Does it work with Snow Leopard or 32 bit kernels? No and I have no plans to make a version for 32 bit kernels or anything older than Lion. WoL from S5 doesn't work with this driver but under Windows it's working. Is this a driver bug? No it isn't, the driver is working as it should because OS X doesn't support WoL from S5.  
      Installation
      Goto /S/L/E and delete AppleIntelE1000e.kext. Recreate the kernel cache. Open System Preferences and delete the corresponding network interface, e. g. en0. Reboot. Install the new driver and recreate the kernel cache. I recommend to use Kext Wizard or a similar utility for the installation. Reboot Open System Preferences again, select Network and check if the new network interface has been created automatically or create it manually now. Configure the interface.  
      Help - I'm getting kernel panics!
      Well, before you start complaining about bugs after you upgraded macOS and ask me to publish a driver update, you should first try to resolve the issue on your own by cleaning the system caches.
      As the driver uses macOS's private network driver interface, which is supposed to be used by Apple provided drivers only, you might run into problems after an OS update because the linker may fail to recognize that IONetworking.kext has been updated and that the driver needs to be linked against the new version (Apple provided drivers avoid this problem because they are always updated together with IONetworking.kext). As a result, the linking process produces garbage and the driver may call arbitrary code when trying to call functions from IONetworking.kext. This usually results in unpredicted behavior or a kernel panic. In order to recover from such a situation, you should clean the System Caches forcing the linker to recreate it's caches:
      Delete all the files in /System/Library/Caches and it's subdirectories but leave the directories and the symbolic links intact. This is very important! Reboot. Recreate the kernel cache. Reboot again.  
      Troubleshooting
      Make sure you have followed the installation instructions especially when you have issues with certain domains while the others are working fine. Use the debug version to collect log data when trying to track down problems. The kernel log messages can be retrieved with "grep kernel /var/log/system.log" in Terminal. Starting from Sierra use "log show --predicate "processID == 0" --debug" in order to retrieve kernel logs. Include the log data when asking for support or giving feedback. I'm an engineer, not a clairvoyant. Don't copy and paste large amounts of log data to your post. Create an archive with the log data and attach it to your post. In case you don't want to make your log data publicly accessible, contact me via PM and I will provide you a mail address to send it directly to me.  Check your BIOS settings. You might want to disable Network Boot and the UEFI Network Stack as these can interfere with the driver. Double check that you have removed any AppleIntelE1000e.kext from your system because it could prevent the driver from working properly. Delete the following files: /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist /Library/Preferences/SystemConfiguration/preferences.plist Verify your bootloader configuration, in particular the kernel flags. Avoid using npci=0x2000 or npci=0x3000.  In Terminal run netstat -s in order to display network statistics. Carefully examine the data for any unusual activity like a high number of packets with bad IP header checksums, etc. In case auto-configuration of the link layer connection doesn't work it might be necessary to select the medium manually in System Preferences under Network for the interface. Use Wireshark to create a packet dump in order to collect diagnostic information. Keep in mind that there are many manufacturers of network equipment. Although Ethernet is an IEEE standard, different implementations may show different behavior causing incompatibilities. In case you are having trouble try a different switch or a different cable. Changelog
      Version 2.5.0 (2019-10-15) Reworked interrupt throttling code and added new configuration parameters. Version 2.4.0 (2018-04-14) Added support for 300 series versions of I219LM and I219V. Updated underlying Linux source code. Version 2.3.0 (2017-06-20) Added support for 200 series versions of I219LM and I219V. Version 2.2.0 (2016-09-23) Disabled TSO to work around a hardware bug. Version 2.1.0 (2016-05-24) Added support for I219LM and I219V Version 2.0.0 (2015-04-22) First official release which is identical to 2.0.0d2 (only the version number has been changed). Version 2.0.0d2 (2015-04-04) Changed the tx descriptor write back policy for 82579, I217 and I218 to prevent random tx deadlocks. Version 2.0.0d1 (2015-03-14) Uses Apple's private driver interface introduced with 10.8. Supports packet scheduling with QFQ Solves the VMware issue. Version 1.0.0d6 (2015-03-04) Reworked TSO6 support to avoid problems with VMware. Wake-on-LAN now working. Version 1.0.0d5 (2015-02-27) Reworked TSO4 support to eliminate the bug of 1.0.0d4. Added some debug code in order to collect information about the VMware related issue. Version 1.0.0d4 (2015-02-25) Set total length field of the IP-header to zero for TSO4 operations. Report EEE activation state in kernel log message when the link has been established. Version 1.0.0d3 (2015-02-11) Reworked media selection and EEE support (EEE is now activated when both link partners support it. It can be disabled selecting the medium manually). Duplex setting for 10/100 MBit connections is now reported correctly. The number of tx descriptors has been reduced from 2048 to 1024. The code has been cleaned up and obsolete files have been removed. Version 1.0.0d2 (2015-01-31) First development release. Getting the Driver
      The source code can be found on GitHub: https://github.com/Mieze/IntelMausiEthernet There is also a prebuilt binary for 10.11 and above in the download section: http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/ Build from Source for 10.8
      Register as a developer on Apple's developer website. A free membership is sufficient. Download a copy of Xcode 5.1.1 and install it on your machine. In the project select 10.8 as the "Base SDK" and the "Deployment Target". Call "Archive" from the menu "Product" and save the built driver. Credits
      Thanks to RehabMan and Yung Raj for running tests and pointing me in the right direction while I was trying to fix TSO. Special thanks to Yung Raj for motivating me when I was about to give up.
    • By WeBeRiO
      Hi all! I have a Asus h110s1 with a i5-7400 working.

      Only no wake up from sleep, screen black and reboot.

      Is posible fix this problem? No is model UHD.

      Thank U.-
    • By LucasMatheus
      Equipment Information PROCESSADOR: Intel Core i5 5200U de 2.2 até 2.7 GHz; MEMÓRIA RAM: 6 GB; PLACA DE VÍDEO: Intel5500/Geforce 910M 2 GB; DISCO RÍGIDO: 1 TB; TELA: 15.6″ Full HD 1920 x 1080 pixels; CONEXÕES: 1 HDMI, 3x USB, 1 RJ 45 ,1 COMBO audio jack e WiFi; https://www.samsung.com/br/pc/notebook-np300e5k-xf1br/
        I am unable to activate the Intel HD5500.
      Can only start with fakeid: 0X12345678
       
      Here is the attached Clover I am using
      Clover
    • By technosinner
      Hi guys,
       
      I need help with my Sapphire RX580 8GB. It works and I have it connected to a BenQ EW3270U (4k monitor through DP), but I noticed that the quality of my video is not exactly great; I just don't feel like it's up to spec with some fuzziness and everything just isn't as sharp as I expect it to be. It's hard to explain exactly what I see, but especially when there's transparency in windows for instance, I see what I would compare to colour compression artifacting in the gradients of the images showing through the transparency effects. It looks like a video with fading on Youtube but the compression makes it look like waves of pixels as opposed to a real gradient, if that makes any sense? It's impossible to film or photograph properly, and - the part that gets me - if I do a screenshot, it's not visible! I must have been super tired when I posted... it's visible on screen shots after all (see attached). It screams graphic acceleration issues to me but I really am at a loss on how to diagnose this issue further. It's not unusable or anything, but I want to get it to work properly and get as much as I can out of it all.
       
      As a comparative I did plug in a Retina MBP to the monitor to make sure it wasn't the issue and as expected, I did not see any of this with the MBP.
      I have Lilu and WEG in my 10.14 kext folder, and my (shameful) config is attached, but I more than likely am missing something important...
       
      All this explained, I want to point out a few things: this is an old machine (built 2012) and I had the same config throughout with exactly 0 issues. This is one reason why I not only never had to optimize it, but I now also pretty much fell off the Hackintosh bandwagon: I am not exactly well versed in all the technical backend of this community as I was until now lucky with a plug and play machine with no issues.
       
      I will need a lot of help to get back up to date... that said I also had incomprehensible and undiagnosed issues getting the RX580 to work on this machine. Even if it was effortless for everyone else, I had to do a LOT of troubleshooting and in the end, I have no clue how I got it to work! So I'm mortified of changing anything on it without getting some advice first since everything, iCloud and iMessage included, works. I'll be happy to fill in any info and I'm hungry to learn. It's just a bit daunting to start over and my searches have discouraged me a but. I know beggars can't be choosers but I have a 60-hour a week job and I just need a bit of guidance if anyone wants to help me off my training wheels  I fully know I'm in a bad spot and quite frankly I'm ashamed of it. Help me make it better please.
      config.plist



×