Jump to content
Sign in to follow this  
Followers 0
plastic9mm

MacPro 1,1 Chameleon Bootloader Help

By plastic9mm, in OS X Mountain Lion (10.8)

1 post in this topic

Recommended Posts

plastic9mm    0

plastic9mm
Posted

I have a MacPro 1,1 that I have successfully upgraded firmware to 2,1 using the utility found on the Netkas forums.

 

It is currently running 10.7.5, and I am attempting to install 10.8 using the Jabbawok walk-through here http://www.jabbawok.net/?p=47.

 

I am having a TON of trouble.

 

I have a CF to ATA/IDE adapter installed in the lower optical drive bay and jumpered as "Master" with the optical drive set to "Slave" and an 8GB CF Card installed. It has been partitioned as MBR with 2 volumes, 1x1GB HFS+ "BOOT" and 1x7.02GB HFS+ "Installer"

 

I have followed the guide to the letter as far as putting the correct components on the "Installer" partition, as well as the settings within the boot.plist and smbios.plist for Chameleon.

 

When I restart the computer I get the grey/white screen briefly that tells me Chameleon is at least trying to load, however the computer then boots to my Windows 7x64 HDD every time.

 

I have tried changing the default partition to the partition name as was suggested to me on the Netkas forums, but no luck. I have identified the "Installer" partition as 4,2 using diskutil, and input that value as well, it still boots to the Windows 7x64 HDD.

 

I simply cannot get it to boot to the "Installer" partition in order to attempt installing 10.8. I could seriously use any help as I'm at my wits end.

 

My current system configuration is as follows:

 

MacPro 1,1 with 2.1 firmware

OS X 10.7.5 on HDD in Bay 1

Windows 7x64 on HDD in Bay2

250GB HDD in Bay 3

250GB HDD in Bay 4

8GB CF Card installed in CF to ATA/IDE jumpered as "Master"

Sapphire Radeon HD 5770 flashed with EFI bios following the guide on the Netkas forums (No Boot Screen)

 

I'm sorry if this is the wrong forum to post in, but I didn't think it fit in the OSx86 section as I'm using a MacPro and not a Hackintosh.

Share this post

Link to post
Share on other sites
Advertisement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0
Go To Topic Listing OS X Mountain Lion (10.8)

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • viktr
      Mojave and nvme samsung 970 - cannot install
      By viktr
      Hi!
       
      Please help - cannot install mojave on the gb z370n wifi, 8700, 2x samsung 970 nvme, rx570
      Downloaded latest clover and kexts and installation hangs at the beginning.
      Got some errors at boot (during clover boot, before menu appears) then boot "Mojave install" and then it stuck. Please help. Tried to turn off all fixes, tried old apfs.efi instead of apfsdriverloader - all with no success. Maybe it's a known issue and I'm just doing something completely wrong?
       
      ty
       
       


      clover.tar.gz

    • MaLd0n
      [Guide] macOS Sierra 10.12.x on ASUS H61M-A / DSDT
      By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
            Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Install Clover UEFI in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace Folder CLOVER INSTALLATION.zip   --Install Sierra and boot into system!   --Install Clover UEFI and replace with my folder  CLOVER POST INSTALLATION.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches!   If you need DSDT edit... Run it RunMe.app   --DSDT My DSDT DSDT.ASUS H61M-A MaLd0n.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -EHCx -LPC -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -PNLF Clear NVRAM, Purge and Kextcache
          --FakeSMC http://www.hwsensors.com/releases --Audio https://github.com/vit9696/AppleALC --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
    • MaLd0n
      [Guide] Sierra / High Sierra on Gigabyte GA-H97M-D3H / DSDT
      By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
          --Create a bootable copy of macOS Sierra   http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra   http://diskmakerx.com/   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder    CLOVER.zip   --Install Sierra/High Sierra and boot into system!   Post Installation   --Install Clover in HDD/SSD and replace with my folder   CLOVER.zip   --Nvidia WebDriver Sierra   http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/   --Nvidia WebDriver High Sierra   http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/   --Cuda   http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   Now you need a fine tune!   --DSDT DSDT.GA H97M-D3H MaLd0n.zip Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -EHCx -DARWIN -LPC -XHCI -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -PNLF --Power Management   Use "plugin-type"=1 in DSDT, SSDT or Clover config.plist   --Brightness   Install .app, select the required permission and reboot. Work in F1 / F2 keys! NativeDisplayBrightness.app.zip https://github.com/Bensge/NativeDisplayBrightness/releases *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install  
      --FakeSMC
        https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek/downloads/   --Audio   https://github.com/vit9696/AppleALC   --USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   --LAN   http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!
    • MaLd0n
      [Guide] Sierra / High Sierra on GA X99-UD3P / i7 5820k / DSDT
      By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        --Install Follow my tutorial and use my Clover folder http://www.insanelymac.com/forum/topic/323052-guide-sierra-high-sierra-on-intel-5-6-7-8-and-9-chipset-series-nehalem-sandybridge-ivybridge-haswell-broadwell/ CLOVER Install.zip   --Post Install --Install Clover bootloader and replace with my folder CLOVER Post Install.zip   Bingo!   Now you need a fine tune! DSDT time!   If you need edited DSDT... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer IORegistryExplorer.app.zip -Run it, post files generate in your desktop RunMe.app     -DSDT bios F23 My DSDT  DSDT.MaLd0n GA X99-UD3P.zip   -Patches -FIX ERRORS AND WARNINGS -HPET -SATA -sSATA -DMAC -SLPB -DARWIN -LPC -XHCI -EHCI -PLUGIN TYPE -ALZA to HDEF -HDEF -RTC -IRQs -SBUS -BLC0 -BUS1 -MCHC -ALS0 -IMEI -SHUTDOWN -LAN -SPSR -EC -PNLF -HDMI


      e.g

       
      -Clover https://sourceforge.net/projects/cloverefiboot/files/Installer/ -FakeSMC https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek -Audio https://github.com/vit9696/AppleALC -USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads -LAN https://github.com/Mieze/IntelMausiEthernet   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, nmano and many, many, many others!   We're all here to have fun and learn from each other!  
    • MaLd0n
      High Sierra on Supermicro X10DAI / Dual Xeon E5-2690V4 / DSDT
      By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      -Install, check here 
      http://www.insanelymac.com/forum/topic/323052-guide-sierra-high-sierra-on-intel-5-6-7-8-and-9-chipset-series-nehalem-sandybridge-ivybridge-haswell-broadwell/
       
      -Clover Folder 
      CLOVER.zip
       
      -DSDT 
      DSDT.MaLd0n Supermicro X10DAI.zip
       
      -DSDT Patches 
      -FIX ERRORS AND WARNINGS -HPET -SATA -sSATA -DMAC -SLPB -DARWIN -LPC -XHCI -EHCI -PLUGIN TYPE -ALZA to HDEF -HDEF -RTC -IRQs -SBUS -BLC0 -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN #1 -LAN #2 -SPSR -WIFI -EC -PNLF -HDMI -NVME -Geekbench 

       
      -SS 


       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders! Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, MMido and many, many, many others!   We're all here to have fun and learn from each other!  
×