Jump to content
xpamamadeus

Ozmosis

6,187 posts in this topic

Recommended Posts

Has anyone been able to see what ozmosisdefaults contains? To me that sounds like a likely config file. Maybe it'd be possible to set smbios values there and avoid having to override them in nvram afterwards?

 

OK, I was finally able to download the BIOS from tor. The ozmosisdefaults file is an empty plist file. So assuming it writes a filled-out one to the EFI partition I'm thinking that it should be possible to edit that and put it back into the BIOS?

Share this post


Link to post
Share on other sites
Advertisement

@BonBon6 I extract as uncompressed and try to reinsert as compressed and get this error:
post-407466-0-57634800-1379161748_thumb.png

OsmozisDefault:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Version</key>
<string>1.0</string>
</dict>
</plist>

Share this post


Link to post
Share on other sites

 

@BonBon6 I extract as uncompressed and try to reinsert as compressed and get this error:

attachicon.gifcore-dx.PNG

 

OsmozisDefault:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Version</key>
<string>1.0</string>
</dict>
</plist>

 

With this version I had no issues ; )

Share this post


Link to post
Share on other sites

Problems with the system boot (fakesmc):

 

14.09.13 16:51:33,000 kernel[0]: SMC::smcReadKeyAction ERROR: kSMCReadKeyComm/kSMCReadKeyWithSMCComm failed for key REV  (kSMCSuccess)

MacOS 10.8.5

Share this post


Link to post
Share on other sites

 

Problems with the system boot (fakesmc):

 

14.09.13 16:51:33,000 kernel[0]: SMC::smcReadKeyAction ERROR: kSMCReadKeyComm/kSMCReadKeyWithSMCComm failed for key REV  (kSMCSuccess)

MacOS 10.8.5

 

this its really  not a problem.

According to key REV = Source revision

its totaly unimportant for OS..

I get an error when trying to insert Core_DXE compressed into the ROM. I saw someone at projectosx had the same problem. Is it solved or is this only possible on newer Bios. 

 

Gigabyte z68 Uefi beta Bios : https://www.dropbox.com/s/hhh1abfzyjsp0xi/Z8MXUD2H.rom

it can be done if u make more space by deleting filesystem driver or,and ipv6 modules that are totally unneeded.

i try it and it works.

but when i try to insert those modules again into firmware then again get same error.

 

same behavior using phoenixtool but phoenix tool report that there are no free space to manage modules..

 

maybe to try extract more modules uncompresed then delete those and try to insert compressed.

 

will try and report if have sucess.

 

no sucess,try to fix this bios with help of MDL experts like andyp or yen 

http://forums.mydigitallife.info/forums/25-BIOS-Mods

Edited by xpamamadeus

Share this post


Link to post
Share on other sites

this its really  not a problem.

According to key REV = Source revision

its totaly unimportant for OS..

The system boots from the fifth or sixth time.And when that happens there is no message (kernel[0]: SMC::smcReadKeyAction ERROR: kSMCReadKeyComm/kSMCReadKeyWithSMCComm failed for key REV (kSMCSuccess) in log.

The installation also fails to start on grey screen with with a rotating wheel, as it happens in the absence of fakesmc

139556_825e8b01a6a935552c60cb0344ac823f.

Share this post


Link to post
Share on other sites

I'm getting spammed with this 

Sep 15 00:35:59 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:35:59 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:04 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:04 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:09 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:09 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:14 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:14 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:19 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:19 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:24 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:24 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:29 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:29 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:34 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:34 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:39 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:39 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:44 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:44 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:49 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:49 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:54 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:54 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:59 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:59 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:37:04 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:37:04 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:37:09 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:37:09 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400

Any suggestions.

Share this post


Link to post
Share on other sites

I'm getting spammed with this 

Sep 15 00:35:59 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:35:59 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:04 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:04 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:09 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:09 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:14 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:14 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:19 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:19 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:24 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:24 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:29 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:29 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:34 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:34 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:39 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:39 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:44 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:44 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:49 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:49 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:54 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:54 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:59 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:36:59 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:37:04 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:37:04 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:37:09 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F0Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400
Sep 15 00:37:09 MyMacmini kernel[0]: SMC::smcReadKeyAction ERROR F1Mn kSMCBadArgumentError(0x89) fKeyHashTable=0x0xffffff8027035400

Any suggestions.

ignore...

 

Fan1 Minimum RPM it has to be something coming from lpc plugin or from DSDT

if not from LPC plugin then check this thread for DSDT fix

http://www.insanelymac.com/forum/topic/289791-fixed-by-dsdt-edit-10c-temps-500rpm-fans/

it seems that with 10.8.5 we get more mavericks like problems(devisl) mega lol

 

Magnifico says its a  devisl in my pc ...mega lol

 

Slice says "This is not an error and don't need to be eliminated."

 

devisl in my pc ...mega lol

 

kF6v3y0.gif

Share this post


Link to post
Share on other sites

Yeah, I know, but there MUST be a way to fix it, Ignoring it is just not me.

Don't want my 128GB SSD filling up with logs ;)

edited post

 

Fan1 Minimum RPM it has to be something coming from lpc plugin or from DSDT

if not from LPC plugin then check this thread for DSDT fix

http://www.insanelym...ps-500rpm-fans/

it seems that with 10.8.5 we get more mavericks like problems(devisl) mega lol

Share this post


Link to post
Share on other sites

9/13/13 9:56:15.000 AM kernel[0]: SMC::smcReadKeyAction ERROR $Num kSMCKeyNotFound(0x84) fKeyHashTable=0x0

9/13/13 9:56:15.000 AM kernel[0]: Previous Shutdown Cause: 3
9/13/13 9:56:15.000 AM kernel[0]: SMC::smcInitHelper ERROR: MMIO regMap == NULL - fall back to old SMC mode
9/13/13 9:56:15.000 AM kernel[0]: DSMOS has arrived
 
 
thats the only mention i have in boot and no spamming after that.

Share this post


Link to post
Share on other sites

edited post

 

Fan1 Minimum RPM it has to be something coming from lpc plugin or from DSDT

if not from LPC plugin then check this thread for DSDT fix

http://www.insanelym...ps-500rpm-fans/

it seems that with 10.8.5 we get more mavericks like problems(devisl) mega lol

Was doing it on 10.8.4, it's FakeSMC (Kozlek) problem, must need to add key in plist.

Share this post


Link to post
Share on other sites
I've been following this with interest and thanks to a nudge by STLVNUB to have a play with this Ozmosis loader, I've been running some test here on my Asus Maximum IV Gene-Z with a SandyBridge i7 2600 and have a couple of questions.

 

Is there any way to change FSB as my processor is shown as running at 5.9GHz?

EDIT:  I actually meant Frequency as my standard processor runs using a BCLK at 100Mhz with 34x multipler.



03:773 00:090 Found Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz (2A.06.00) Cores 4 Threads 8
03:773 00:000  P-State Coordination Type HW_ALL -> SW_ANY = SW_ANY
03:773 00:000  Disabling Invalid Flex-Ratio 90000 -> 80000 = 80000
03:773 00:000 Calculated TSC Frequency 3411MHz (3411663333)
03:773 00:000 Calculated CPU Frequency 5920MHz (5920239301)
03:773 00:000 Calculated FSB Frequency  100MHz (100343039)




13:878 00:000 Generated SMBIOS Type 004 Handle 0x0004 123 bytes
13:878 00:000  Vendor                           GenuineIntel
13:878 00:000  Version                          Intel(R) Core(TM) i7-2600 CPU @ 3.40GHz
13:878 00:000  Signature                        0x206A7
13:878 00:000  Feature Flags                    0xBFEBFBFF
13:879 00:000  Socket                           CPU-A (00)
13:879 00:000  External Clock                   0 MHz
13:879 00:000  Max Speed                        5900 MHz
13:879 00:000  Current Speed                    5900 MHz
13:879 00:000  L1 Cache Handle                  0x8
13:879 00:000  L2 Cache Handle                  0xA
13:879 00:000  L3 Cache Handle                  0xB
13:879 00:000  Serial Number                    N/A
13:879 00:000  AssetTag                         N/A
13:879 00:000  PartNumber                       N/A
13:879 00:000  Core Count                       4
13:879 00:000  Enabled Core Count               4
13:879 00:000  Thread Count                     8
13:879 00:000  Processor Characteristics        0x0


 

And for the life of me I can't figure out how to overcome the following issue. I see this in my dmesg



P-State Stepper Error 18 at step 2 in context 2 on CPU 0
P-State Stepper Error 18 at step 2 in context 2 on CPU 1
P-State Stepper Error 18 at step 2 in context 2 on CPU 7
P-State Stepper Error 18 at step 2 in context 2 on CPU 6
P-State Stepper Error 18 at step 2 in context 2 on CPU 4
P-State Stepper Error 18 at step 2 in context 2 on CPU 2
P-State Stepper Error 18 at step 2 in context 2 on CPU 3
P-State Stepper Error 18 at step 2 in context 2 on CPU 5


I have:



sudo kextstat | grep LPC
   80    0 0xffffff7f81ad2000 0x3000     0x3000     com.apple.driver.AppleLPC (1.6.0) <77 10 5 4 3>


I've combined the stepping data from my SSDT in to my DSDT and have 100Mhz increments in my p-states

post-331032-0-83624700-1379175109_thumb.png

 

I've run a few tests with different BIOS versions, nvram can be read and written correctly, and I have successfully tested with changing to my normal iMac 12,2 SMBIOS settings, though for now I'm retracing my steps and back to using the default Ozmosis settings.

 

So what am I missing? 

 

Thanks in advance.

 

EDIT: Stupid me!!! Flashing my BIOS defaulted the Turbo Ratio setting to 'All cores mode' and not Auto. Changing this solved the problem.. Doh!

Share this post


Link to post
Share on other sites

Returned to Clover. It's all a waste of time. 

If you put your specs in your signature, maybe we could have helped more.

Clover is good, but Oz is ....

Welcome back blackosx

@blackosx

try Macmini,5,3 smbios

Share this post


Link to post
Share on other sites

If you put your specs in your signature, maybe we could have helped more.

Clover is good, but Oz is ....

 

Asus P8Z77-M/i5-3570/GTX 650ti (UEFI)/Clover/10.8.5

 

I waited for this project, from the moment of the publication on kickstarter. Seems to me, this excellent continuation of idea of Cartri. But without participation of developers - I doubt that it is possible to make something. I try to persuade the Clover developers to pay attention to this project, but everyone thinks it's a bad idea. Sorry for my English.

Share this post


Link to post
Share on other sites

Hi STLVNUB, Thanks.

 

I did previously try the following MacMini5,3 settings (by a small script)

#!/bin/sh
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BiosVersion=MM51.88Z.0077.B0E.1110141154
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BiosDate=23/02/12
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProductName=Macmini5,3
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProductFamily=Macmini
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:SystemVersion=1.0
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:SystemSerial=C07JL4SGDY3H
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProductId=Mac-7BA5B2794B2CDB12
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BoardVersion=1.0
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BaseBoardSerial=""
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:Manufacturer="Apple Inc."
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:SystemSKU=Mac-7BA5B2794B2CDB12
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:CpuType=%03%07
sudo nvram 7C436110-AB2A-4BBB-A880-FE41995C9F82:boot-args="-v dart=0"

but after a reboot all I got was a black screen with the small hyphen bottom middle of the screen (as normally briefly seen before the kernel is loaded and the boot process starts). I haven't tried those settings since.

Share this post


Link to post
Share on other sites

@blackosx

Probably just a matter or hitting on the right combination of things to make it work on that MB/cpu, but hey, that is what makes a Hackintosh so much fun ;)

But how does it run?

 

I really can't fault Oz here on this setup, credit to the Developers whoever you are.

Share this post


Link to post
Share on other sites

Probably just a matter or hitting on the right combination of things to make it work on that MB/cpu, but hey, that is what makes a Hackintosh so much fun ;)

 

Absolutely!.. That's why we do what we do :)

 

But how does it run?

 

It runs well and I like the detailed boot log. Haven't figured out how to use the UI yet, other than what's been reported, but I'm using verbose mode anyway. And since I'm back to flashing my mobo (it's been a while since doing it), It's fun to test with different kexts and drivers in BIOS too.

 

Do you know of anyway to force/override a systemID so I can keep my Hardware UUID?

 

credit to the Developers whoever you are.

+1

 

EDIT: Cleaned up line spacing.

Share this post


Link to post
Share on other sites
Do you know of anyway to force/override a systemID so I can keep my Hardware UUID?

 

 

I have a theory that it might be possible to add the SMBIOS data (and more) to ozmosisdefaults. Perhaps it's in the same format as Clover. But I'm just spectating Ozmosis for now hoping that someone who is using it will try this out.

Share this post


Link to post
Share on other sites

Do you know of anyway to force/override a systemID so I can keep my Hardware UUID?

No, I was originally using Aptio DMIEDIT, let you change that amongst other things ;),

but that didn't work with Oz,haven't tried it with F15, but will, maybe the NVRAM write problem F16+ stopped it.

 

Must be another NVRAM key to set, perhaps?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Slice
      Since rev 4844 Vector Themes are supported and there are ready-to-use Clovy by Clovy, cesium by Slice and BGM_SVG by Blackosx.
      You may see it's structure to create own theme
      -------------------------------------------------------------------------------------------------------------------------------------------------------
       
       
      Now I want to add vector graphics support in Clover. See rev 4560 and later.
      It is not working yet but designers may begin to create Vector Themes.
      It supposed to consist of SVG elements and has design size. It will be rendered to any screen size scaled from design size.
       
      What application in macOS can create SVG graphics?
      Inkscape is not working in macOS 10.11+. Pity.
      LibreOffice Draw works with SVG but buggy.
      Boxy SVG cost 10$ but looks good enough. It creates the best in simplicity files and have more then enough features.
      Illustrator is good but expensive.
       
      How to improve SVG file?
      Clover has restricted support for SVG. It is your job to make compatible file and as small as possible to speedup rendering.
      Some helps:
      Help:Inkscape – From invalid to valid SVG Inkscape files
      From invalid to valid SVG Adobe Illustrator files
      From invalid to valid SVG files of other editors: BKchem, ChemDraw and CorelDRAW
      Help:Illustrator – Assistance with creating and saving SVG images in Adobe Illustrator that will pass W3C validation
      User:Quibik/Cleaning up SVG files manually
      Later I will write own instructions specific to Clover abilities.
       
      How to create SVG fonts?
      You can google to find ready-to-use SVG fonts.  I found some problems with too beaty fonts: slow rendering and overflow crash. Be careful.
      You can get ttf or otf fonts and convert them into svg by using online WEB services. Not a problem to google.
      But then I want to find a way to simplify the font to reduce a size and speedup rendering.
      You can create own font by FontForge It is opensource and available for Windows, Mac and GNU+Linux. It creates otf font which you can convert to svg font.
       
      Pictures from Badruzeus
      https://www.insanelymac.com/forum/applications/core/interface/file/attachment.php?id=301597
    • By thomaspetersen
      Hi All
       
      I'm trying to start a Hackintosh High Sierra 10.13.5 installation:
      - MSI B350 PC Mate
      - Ryzen 5 - 2600
      - Radeon Pro 580 GPU
      - 4 x 8GB DDR4
      (Have a working clover bootloader for HS 10.13.3 - but for some reason, I can't use that setup with the 10.13.5) 
       
      Have tried different bootloader setup, with different outcomes...
      ATM. I get this error/hang - "Unknown CPU: family = 0x17, model = 0x8, Stepping = 0x2"
      Have search google, and can see that the threads ppl. are getting this, is when they look at "About this mac", I haven't yet installed the OSX.
       
      So can someone help...

      I'm running the newest Kexts: AppleALC, FakeSMC, Lilu, RealtekRTL8111, USBInjectAll and WhateverGreen.
      In Bootloader setup, i'm running: -v, -s, -f, -no_compat_check, busratio=34, PCIRootUID=1, npci=0x2000, dart=0 and nv_disable=1
      In SMBIOS i'm using the iMac18,2 and in RT i'm using BooterConfig: 0x28 and CsrActiveConfig: 0x67
      In installed drivers i'm using: AptioMemoryFix, EmuVariableUefi-64, OsxAptioFixDrv-64 (Have tried Fix2 as well)
       
      But i'm, keep getting the Unknown CPU hang/error, can someone help...
      Or do someone have a setup with the same CPU and GPU, that can show me his/her setup for Bootloader/Kexts...
    • By apianti
      Just so you all know I actually have done something. I have pushed the source to both my github and to sourceforge, please commit to the experimental branch and I will merge it into the stable branch once it is safe. Also, nothing meaningful happens yet so don't get too excited. Only the Visual studio build works right now. I haven't set up the Xcode or Makefile builds yet, I'm trying to do them now.
       
      https://github.com/apianti/Clover
      https://sourceforge.net/p/cloverefiboot/Clover
       
      IA32/X64/ARM/ARM64 testing ISO (6/7/2018): Clover-3.0-experimental.iso
    • By cvad
      Bootdisk Utility Make bootable USB Flash Disk for MAC OS X with Latest Clover bootloader revision fast and easy by one click! under OS Windows.
      Special utility from cvad & russian MAC community for new hackintosh users.
       
      BDU_v2.1.2018.023b.zip
      MakeCloverBDUReadyZip.bat.zip
      Enjoy...
       
       
       
      Feel free to "Rate File"
      Submitter cvad Submitted 04/28/2013 Category Bootloaders  
      BDU_v2.1.2015.016b.zip
      BDU_v2.1.2015.018b.zip
      BDU_v2.1.2016.019b.zip
      BDU_v2.1.2016.020b.zip
      BDU_v2.1.2017.021b.zip
      BDU_v2.1.2017.022b.zip
×