Jump to content
xpamamadeus

Ozmosis

6,210 posts in this topic

Recommended Posts

2 hours ago, ammoune78 said:


I think a patch is needed here, to solve this problem. I did a request for it, on Mojave topic, but still no answer, especially when clover do the job, sadly Oz need that patch!


Sent from my iPhone using Tapatalk

Can you show the topic for me? I can't find either!THX

Edited by taoarch

Share this post


Link to post
Share on other sites
Advertisement
On 9/19/2018 at 6:44 PM, taoarch said:

This is a way to solve hd4600 which could not boot Mojave under HD4600,but not perfect for me!

First,I must set 32m&128m in bios settings.

Then,I must enter the BIOS and exit it without saving everytime.

Last,every boot or reboot,lt will panic with usb,I have patch in kernextpatcher,and in High Sierra,everything is ok!

I don't know why...

Analogic problem, but usb - good work, Ozmosis need to patch ? Everywhere all working with GTX760 + HD4600, but in Mojave - NO! ((((

 

Method DSM in IGPU Device this (SMBIOS iMac14,2):

 


                Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
                {
                    If (LEqual (Arg2, Zero))
                    {
                        Return (Buffer (One)
                        {
                             0x03                                           
                        })
                    }

                    Return (Package (0x02)
                    {
                        "AAPL,ig-platform-id", 
                        Buffer (0x04)
                        {
                             0x04, 0x00, 0x12, 0x04                         
                        }
                    })
                }

Edited by ShadIK02

Share this post


Link to post
Share on other sites

I confirm for what@TypeThree said, just enter bios and exit without changing something in bios settings works, even without changing DVMT.

For the previous quote, i’ll post it leter, but it’s just that i posted for someone if he have a DVMT patch for haswell, because guys had posted Skylake Kabylake and maybe Ivy Bridge too DVMT PATCH!


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites
55 minutes ago, ShadIK02 said:

Analogic problem, but usb - good work, Ozmosis need to patch ? Everywhere all working with GTX760 + HD4600, but in Mojave - NO! ((((

 

Method DSM in IGPU Device this (SMBIOS iMac14,2):

 


                Method (_DSM, 4, NotSerialized)  // _DSM: Device-Specific Method
                {
                    If (LEqual (Arg2, Zero))
                    {
                        Return (Buffer (One)
                        {
                             0x03                                           
                        })
                    }

                    Return (Package (0x02)
                    {
                        "AAPL,ig-platform-id", 
                        Buffer (0x04)
                        {
                             0x04, 0x00, 0x12, 0x04                         
                        }
                    })
                }

 

Many things are solved with Lilu Whatevergreen and AppleALC.

Things like rename device, injecting good property, device id, etc.

For newbies best way is to use Vit9696 (+team) kexts and all will be fine and working nearly OOB.

 

Fred

Share this post


Link to post
Share on other sites
1 hour ago, FredWst said:

 

Many things are solved with Lilu Whatevergreen and AppleALC.

Things like rename device, injecting good property, device id, etc.

For newbies best way is to use Vit9696 (+team) kexts and all will be fine and working nearly OOB.

 

Fred

I tried, the problem is exactly the same

Share this post


Link to post
Share on other sites
On 9/29/2018 at 2:39 AM, ShadIK02 said:

I tried, the problem is exactly the same

 

You need to remove dsdt patch.

 

Fred

Edited by FredWst

Share this post


Link to post
Share on other sites

The problem is located somewhere different, I'm tracking the issue at the moment.

 

The first anomaly is that the issue appears even before the startup process of Mojave.

Another particularity is that different boards and hardware configurations seem to have the issue to different extends. Quiet magically some people don't even have the issue. I have periods of time where I have no issue at all and then suddenly, even if nothing seems to have changed, I can only enter Mojave with both GPUs by using the "BIOS trick".

Finally, it is confirmed that both iGPU and dedicated GPU can work together in Mojave (with Ozmosis) even when tools like Whatevergreen aren't even used.

 

This all leads me to the conclusion that it's highly unlikely that we are facing a macOS driver issue. The problem appears way to early which points in the direction of a UEFI driver issue, uppermost register- or memory issue – AptioFix.

 

Fortunately the Ozmosis internal AptioFix can be disabled by using the -norelocate boot-argument. At the moment it looks like the issue can be resolved by using -norelocate and loading the OsxAptioFix2Drv instead (AptioMemoryFix lead to NVRam issues during my tests).

Braveheart testers are welcome!

Edited by TypeThree

Share this post


Link to post
Share on other sites

 

2 hours ago, TypeThree said:

Fortunately the Ozmosis internal AptioFix can be disabled by using the -norelocate boot-argument. At the moment it looks like the issue can be resolved by using -norelocate and loading the OsxAptioFix2Drv instead (AptioMemoryFix lead to NVRam issues during my tests).

Braveheart testers are welcome!

 I will test it later,but I am puzzled with why this issue just occur under Mojave?

And you do these via shell or plist and insert OsxAptioFix2drv to bios?

Edited by taoarch

Share this post


Link to post
Share on other sites

For testing I'd load AptioFix through Shell with "load OsxAptioFix2drv" (after navigating to the right directory) and afterwards start the boot.efi by navigating to the right one and entering "boot.efi -norelocate -v".

 

Please try that for me. You can also test different AptioFixDrivers.

Share this post


Link to post
Share on other sites

IMHO, it’s a DVMT problem which was signaled by some users that own other chipsets to like Skylake for example, but they have patches already except for haswell, you can see that in the Mojave topic!


Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Hi guys.:wink_anim:
1. What do I need to change or change in my OZ bios? to install Mojave?
I have in High Sierra:
Btrfs, apfs, EnhancedFat, Extfs, HfsPlus, PartitionDXE, SmcEmulatorKext, DisablerKext, InjectorKext, CpuSensorKext, LpcSensorKext, GpuSensorKext, OzmosisHorizontalTheme, OsmosisDefaults, Ozmosis, RelatekRTL8111.
In / Efi / Oz / Darwin / Extensions / Common /: I have: Lilu.kext and AppleALC-OZM.kext
Board: asus p8z77-m - i5 3470 - NVIDIA GeForce 210 - iMac13,2

2. What graphics do you recommend that I have low cost?
I appreciate any help.

Share this post


Link to post
Share on other sites
53 minutes ago, medallo said:

Hi guys.:wink_anim:
1. What do I need to change or change in my OZ bios? to install Mojave?
I have in High Sierra:
Btrfs, apfs, EnhancedFat, Extfs, HfsPlus, PartitionDXE, SmcEmulatorKext, DisablerKext, InjectorKext, CpuSensorKext, LpcSensorKext, GpuSensorKext, OzmosisHorizontalTheme, OsmosisDefaults, Ozmosis, RelatekRTL8111.
In / Efi / Oz / Darwin / Extensions / Common /: I have: Lilu.kext and AppleALC-OZM.kext
Board: asus p8z77-m - i5 3470 - NVIDIA GeForce 210 - iMac13,2

2. What graphics do you recommend that I have low cost?
I appreciate any help.

 

Here is,

 

On 6/26/2018 at 10:19 PM, TypeThree said:

Tried to fix that, this is what @cecekpawon and I came up with. This is just a new approach / alternative way to make kext-injection work with Ozmosis and the newest OS.

Please don't confuse this with a new Oz Version, it is not!

 

To differentiate, the patch is called 167X-XMAX and is fully based on 167X-MASS but used extended with cecekpawons UEFTW-Tools.

 

To make kext-injection work with Mojave a few things are needed:

Using this Oz file you will not have working injection! You must use KernextPatcher with a special KernextPatcher.plist! This plist holds everything for injection from ML-->Mojave. The Plist is included into the following FFS, if you use the EFI version you need to use the attached Plist (which you can extend with your own (Kext/Booter...)-patches).

After several tests I can confirm that Kext Injection and installation with Mojave works using this Ozmosis + Kernextpatcher but we need braveheart testers.

To install Mojave use: Ozmosis 167X-XMAX, KernextPatcher with right Plist, EnhancedFat, ApfsDriverLoader, HFSPlus, latest FakeSMC and an updated defaults.plist (this is a template/example: Defaults.plist / OzmosisDefaults.ffs).

Also the use of AcpiPatcher is recommended to fix bad ACPI-Headers and apply renames.

 

Please use all these files at your own risk!

Good luck!

 

IMHO, buy a used R9 280X from 100 euros in eBay it's good idea! which work OOB with Hamachi framebuffer!

Share this post


Link to post
Share on other sites
1 hour ago, medallo said:

ammoune78 

Thank you.
First the graph to start.
R9 280X very big.
NVIDIA GeForce GT 710 OOB work?

 

If I'm not saying something wrong, yes! Some users reported that it work on Mojave

Share this post


Link to post
Share on other sites
On 10/1/2018 at 12:00 AM, WinstonAce said:

but it's too fast to see what's going on

For me that sounds like at least something is going on... When you boot Mojave with both GPUs without the Aptio Fix, you will get no Verbose Output at all. If there's some Verbose output after performing the previously presented method, it means that we are one step closer to the solution.

 

Have you tried AptioMemoryFix and OsxAptioFixDrv, too?

Share this post


Link to post
Share on other sites
6 hours ago, medallo said:

ammoune78 

It is very large, it does not fit and a little expensive.

Excuse me, i was meaning the GT710 instead!

 

5 hours ago, TypeThree said:

For me that sounds like at least something is going on... When you boot Mojave with both GPUs without the Aptio Fix, you will get no Verbose Output at all. If there's some Verbose output after performing the previously presented method, it means that we are one step closer to the solution.

 

Have you tried AptioMemoryFix and OsxAptioFixDrv, too?

 

Why with clover no problem, while with Ozmosis the problem appear! Then it appear for other chipsets too, can you see the post that i've linked for Mojave topic?  

Share this post


Link to post
Share on other sites
16 hours ago, WinstonAce said:

GT710 puede ser Kepler o Fermi, asegúrese de que está basado Kepler.

Enviado desde mi SM-G960F utilizando Tapatalk
 

hi.

in the specifications of NVIDIA GeForce GT 710 does not show if it is Kepler or Fermi. Where do I find them? only shows Cuda.

Share this post


Link to post
Share on other sites
3 hours ago, medallo said:

hi.

in the specifications of NVIDIA GeForce GT 710 does not show if it is Kepler or Fermi. Where do I find them? only shows Cuda.

Only 750 is not Kepler ,all other cards are Kepler in 7xx series。

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Rohan20
      Opencore is running really really slow on Catalina 10.15.4. So It was running perfectly before I put the ssdt-pnlf for enabling Brightness control. it is running really slow and I verified my config with the sanity checker and its all correct. can someone please help. I am attaching my oc folder.

       
      https://www.dropbox.com/s/drkek0eaz19ina5/OC.zip?dl=0
       
    • By StarFighter_77
      I built this hack years ago now. Started with Lion, now on El Cap. I want to update now to High Sierra.

      I think I messed up my Clover when I downloaded the update .pkg and just installed it without taking my time or customizing the install. Was on Clover r3423, now I think I'm on r5104

      I've been searching and reading this site and others for a few days before making this thread, but I need help compiling what I've learned to get my system running correctly again and ready to update to High Sierra. Then, eventually, I want to update my graphics card, switch to UEFI (if necessary) and update to Mojave.

      I couldn't get system to boot. Could get to Clover and all the options, except the Shell... I hit enter on the Shell and I get black screen and nothing.

      The only way I got it to boot was to add -v to boot args, and change smbios from 14,2 to 13,2. Not sure why that worked still. Also I'm running two monitors, but I can only now run one of them off the Intel 3000 Graphics and the second one off my GFX Card.

      So now I'm afraid to shut down or reboot.... I could really use some help with Clover.

      I'm pretty sure my config file in Clover is not right. Also, some of the files in my Clover backups are not in the new Clover install. (2.5k 5104)

      If someone could please take a look at the files I've attached and help me sort this out, I would be grateful. Thank you, Thank you, Thank you.

      I've attached
      - The last boot log
      - The current Clover folder from the EFI partition after performing Clover update. (.zip)
      - The Clover backup that was working before Clover update (.zip)
      - Library/Extensions Folder (screen shot)
      - System/Library/Extensions Folder (.zip)

      Here is my current hardware:

      Mobo: GIGABYTE GA-Z68MX-UD2H-B3

      CPU: Intel Core i7-2600K

      GPU: GIGABYTE ATI Radeon HD6870 1GB DDR5 2DVI/HDMI/2x

      RAM: Corsair Vengeance Blue 16 GB DDR3 SDRAM Dual Channel Memory Kit CMZ16GX3M4A1600?C9B

      HD0 (for OS and Apps): OCZ Technology 120 GB Vertex Series SATA II Solid State Drive

      HD1 (file storage, Adobe scratch disk): Samsung 1 TB Spinpoint 7200 RPM 32MB Cache SATA

      BURNER: LG CD/DVD Burner Model GH22NS50

      CPU COOLER: Corsair Cooling Hydro Series H50 All in One High-performanc?e CPU Cooler CWCH50-1

      P/S: Antec CP-850 850 Watt CPX Power Supply Unit

      CASE: Antec Performance One P183 V3 Case
      CLOVER.zip
      CloverBackup.zip
      bootlog.txt

      S_L_E.zip
    • By dgsga
      Can I propose a new subforum be created for the new OpenCorePkg OpenCore front end being created by vit9696 and others, it is a fantastic piece of work:
      https://github.com/acidanthera/OpenCorePkg
      Even at version 0.1 it runs my Mojave 10.14.4 setup very nearly flawlessly. It consists of a 10KB bootstrap BootX64.efi and a 200KB OpenCore.efi OS loader. All configuration is done using a very well documented config.plist 
       
       
    • By cvad
      View File Bootdisk Utility
      Make bootable USB Flash Disk for MAC OS X with Latest Clover bootloader revision fast and easy by one click! under OS Windows.
      Special utility from cvad & russian MAC community for new hackintosh users.
       
      Enjoy...
       
      For more information and complete instructions please see this topic.
       
       
       
       
      Feel free to "Rate File"
      Submitter cvad Submitted 04/28/2013 Category Bootloaders  
×