Jump to content
xpamamadeus

Ozmosis

6,214 posts in this topic

Recommended Posts

Advertisement

So, I found DSDT it is AmiBoardInfo, and what is SSDT in the rom? I couldn't find any ssdt or CpuSsdt or CpuPm in Bios...

 

Or can you place it in bios by yourself and send me the bios and I will try it? But please use GFX1 in DSDT instead of GFX0, because I use MacPro6,1 definition.

 

The DSDT is in AmiBoardInfo and the SSDT-CpuPm is in the module: (299141BB-xxxx-xxxx-xxxxxxxxxxxx) that's after PowerManagement: DXE Driver on the bottom of the second Volume, use the .raw provided to replace the current .raw.

 

DSDT SSDT aml:dsl X79-UP4 F8G.zip

 

If you can add them by yourself then it's ok, but if not, let me know to do it, excuse me Merronk, today i just want to de-stress

Edited by ammoune78

Share this post


Link to post
Share on other sites

Ok, here I've made a Rev1.0 F7 ROM of your board, you have to add your own OzmosisDefaults.raw and AppleALC with Lillu, you can use UBUTool to update this ROM.

 

XMASS-X79UP4.F7.zip

Share this post


Link to post
Share on other sites

Ok, here I've made a Rev1.0 F7 ROM of your board, you have to add your own OzmosisDefaults.raw and AppleALC with Lillu, you can use UBUTool to update this ROM.

 

attachicon.gifXMASS-X79UP4.F7.zip

Thanks a lot, I will try it this weekend!!!

Share this post


Link to post
Share on other sites

Ok, here I've made a Rev1.0 F7 ROM of your board, you have to add your own OzmosisDefaults.raw and AppleALC with Lillu, you can use UBUTool to update this ROM.

 

attachicon.gifXMASS-X79UP4.F7.zip

Is it a version for High SIerra? I didn't found an apfs. Will it work?

And what about USB Injector?

Share this post


Link to post
Share on other sites

Yes it's a High Sierra version, but I didn't put there any apfs, i forgot to add it, but you can use the last one if you want! Just make sure to do a bcfg to register the apfs loading on the boot, follow the steps said by cecekpawon

Share this post


Link to post
Share on other sites

Hi

I have two problems which I didn't find answers for:

 

1.Shell is working only on the first boot after nvram reset (Option+Command+P+R)

after that, it's booting the first boot manager in boot order (boot.efi of my macOS installation)

i'm not using it frequently so it's no big deal.

 

2.High sierra specific problem:

when restarting - HS doesn't boot - just the apple logo with no progress bar

but if I select the boot entry with F12 during POST it's working fine.

 

made different ROMs (with MMTOOL and OZMTool) 

don't know if it's matter but I tried several FFS compressed and uncompressed and in various order (index) in the rom

but it's always the same.

 

i'm using:

EnhancedFat

HfsPlus

NTFS

Extfs

HermitShell

KernextPatcher

AcpiPatcher

Ozmosis

 

and hint/direction would be appreciated.

 

@cecekpawon

edit: disabling KernextPatcher seems to fix the 2nd problem.

Share this post


Link to post
Share on other sites

1.

 

My experience with Ozmosis NVRAM reset: it will also reset my installed driver (entries) with bcfg, probably the boot entries too. After NVRAM reset Ozmosis will start to looking installed Shell (with known GUID or by name, again) on firmware (if any) and append it to our freshly boot entries. Just guessing here, not sure what really happened there, sorry. So idk whos delete / broke your new shell entry after next reboot.. I dont burn my shell into firmware (I need to frequently update from EDK), my ASUS mobo are able to launch shell (placed on FAT32 root) from EFI setup.

 

2.

 

I have made some updates while ago.

KernextPatcher (rev 94c | 2017-10-23 17:29:14)
---
New attempt to get correct RelocBase from overrided AllocatePages before its fallback to the old way.
Added video infos comparisson to get valid Bootargs.

KernextPatcher (rev 94d | 2017-10-24 21:42:57)
---
Fix: Restarted from Windows we got empty KernelData because Oz have not been done yet to relocating kernel into new address.
The workarround is to index all addresses got from overrided AllocatePages and do checking all of them after ExitBootServices.

So I doubt if latest compiled binaries could help you. And honestly Im surprised here to hear that KernextPatcher will prevent Ozmosis to do their job, which is bad. It should just exit & do nothing if could not found any valid kernel address. You may disable your patches one by one to find out more. Whats on screen if you start to booting verbose? Any log file for me?

Share this post


Link to post
Share on other sites

1.

 

My experience with Ozmosis NVRAM reset: it will also reset my installed driver (entries) with bcfg, probably the boot entries too. After NVRAM reset Ozmosis will start to looking installed Shell (with known GUID or by name, again) on firmware (if any) and append it to our freshly boot entries. Just guessing here, not sure what really happened there, sorry. So idk whos delete / broke your new shell entry after next reboot.. I dont burn my shell into firmware (I need to frequently update from EDK), my ASUS mobo are able to launch shell (placed on FAT32 root) from EFI setup.

 

2.

 

I have made some updates while ago.

KernextPatcher (rev 94c | 2017-10-23 17:29:14)
---
New attempt to get correct RelocBase from overrided AllocatePages before its fallback to the old way.
Added video infos comparisson to get valid Bootargs.

KernextPatcher (rev 94d | 2017-10-24 21:42:57)
---
Fix: Restarted from Windows we got empty KernelData because Oz have not been done yet to relocating kernel into new address.
The workarround is to index all addresses got from overrided AllocatePages and do checking all of them after ExitBootServices.

So I doubt if latest compiled binaries could help you. And honestly Im surprised here to hear that KernextPatcher will prevent Ozmosis to do their job, which is bad. It should just exit & do nothing if could not found any valid kernel address. You may disable your patches one by one to find out more. Whats on screen if you start to booting verbose? Any log file for me?

isn't there a method to load a script or something that detects mac drives and automatically put those entries?

Share this post


Link to post
Share on other sites

cecek i used AcpiPatcher and KernextPatcher, but when i do bcfg driver dump it shows Invalid arguments, when i do the "ls" command i have the FS0=USB/EFI not the HDD/EFI. Excuse me i'm not familiar with shell, but logically i got USB as FS0 and not the HDD, what i have to do in this case?   

Share this post


Link to post
Share on other sites

isn't there a method to load a script or something that detects mac drives and automatically put those entries?

Not sure what you meant by auto "detects mac drives", Ozmosis will take care of those jobs.

Like this? I have not tried my self. The script is trying to load all required drivers & start boot.efi from matched path.

Create boot entry to shell with startup.nsh reside in the same directory. To enable it (by removing -nostartup) use shellopt.

 

cecek i used AcpiPatcher and KernextPatcher, but when i do bcfg driver dump it shows Invalid arguments, when i do the "ls" command i have the FS0=USB/EFI not the HDD/EFI. Excuse me i'm not familiar with shell, but logically i got USB as FS0 and not the HDD, what i have to do in this case?   

Then please try another one fs1, fs2, ... But why "bcfg driver dump" give you "Invalid arguments" error msg? It should be "no options found" if empty.

post-1101532-0-42063000-1510424312_thumb.png

Share this post


Link to post
Share on other sites

I don't know why but I don't have screen like you, i only used shell64.efi from Clover Tools folder and renamed it to BOOTX64.efi, don't know from where to download Shellx64.efi

Share this post


Link to post
Share on other sites

Not sure what you meant by auto "detects mac drives", Ozmosis will take care of those jobs.

Like this? I have not tried my self. The script is trying to load all required drivers & start boot.efi from matched path.

Create boot entry to shell with startup.nsh reside in the same directory. To enable it (by removing -nostartup) use shellopt.

 

Then please try another one fs1, fs2, ... But why "bcfg driver dump" give you "Invalid arguments" error msg? It should be "no options found" if empty.

I mean like in HFS partitions used to appear in my F12 Boot entries, Now with apfs mac drive with any nvram reset it goes away unless i use the method of manually loading the boot.efi from apfs mac disk.

Share this post


Link to post
Share on other sites

Not sure what you meant by auto "detects mac drives", Ozmosis will take care of those jobs.

Like this? I have not tried my self. The script is trying to load all required drivers & start boot.efi from matched path.

Create boot entry to shell with startup.nsh reside in the same directory. To enable it (by removing -nostartup) use shellopt.

 

Then please try another one fs1, fs2, ... But why "bcfg driver dump" give you "Invalid arguments" error msg? It should be "no options found" if empty.

 

here you go:

 

I finally got it at

fs2:

Now It's time to put these babes in the ROM, should I have to put there the plist file also as ffs like OzmosisDefaults?

Crusher you are always at the right time at the right place, thanks, I'll change the one in Efi with this one

Share this post


Link to post
Share on other sites
1. Please I need audio for alc887 for high Sierra 10.13 :(

Place AppleALC.kext in Efi / Oz / Darwin / Extensions / Common and it does not work, it damages bios ozonosis and black screen and it does not advance.

In sierra 10.12 it worked well together with dsdt and ssdt.

 

2. Is it necessary to put ozmosisDefault.plist also in the EFI folder of the high-sierra disk?

I appreciate any help.

Share this post


Link to post
Share on other sites

 

1. Please I need audio for alc887 for high Sierra 10.13 :(
Place AppleALC.kext in Efi / Oz / Darwin / Extensions / Common and it does not work, it damages bios ozonosis and black screen and it does not advance.
In sierra 10.12 it worked well together with dsdt and ssdt.
 
2. Is it necessary to put ozmosisDefault.plist also in the EFI folder of the high-sierra disk?
I appreciate any help.

 

 

Here's patched AppleALC Rev 1.2.1 with Lillu Kext, Layout ID used: 1 and will not work with other Layout ID's, so in HDEF only put 1 as Layout ID, you have the FfsCompressed file for ROM and kext. Rename your OzmosisDfaults to Defaults and put it in Efi/Oz/.

 

AppleALC 887 L1 Rev1.2.1 Kext-Ffs.zip

Share this post


Link to post
Share on other sites

I have this stored as AddBoot.nsh in EFI\Tools:
 

@echo -off

if x%1% == x then
  echo Missing argument!
  echo Usage:
  echo AddBoot UUID
  goto END
endif

set -v DiskUUID %1%
set -v macOS notfound
set -v Recovery notfound
set -v UefiShell fs0:\EFI\Shells\HermitShellX64.efi

for %a run (0 9) 
  if exist fs%a:\%DiskUUID%\System\Library\CoreServices\boot.efi then
    set -v macOS fs%a:\%DiskUUID%\System\Library\CoreServices\boot.efi
    goto FSFOUND
  endif
endfor

goto NOTFOUND

:FSFOUND

for %a run (0 9) 
  if exist fs%a:\%DiskUUID%\boot.efi then
    set -v Recovery fs%a:\%DiskUUID%\boot.efi
  endif
endfor

bcfg boot rm 1
bcfg boot rm 1
bcfg boot rm 1

if not %macOS% == notfound then
  bcfg boot add 1 %macOS% "macOS"
endif

if not %Recovery% == notfound then
  bcfg boot add 2 %Recovery% "Recovery"
endif

if exist %UefiShell% then
  bcfg boot add 3 %UefiShell% "HermitShell"
endif

:NOTFOUND

bcfg boot dump

:END

After a Ozmois reset, I boot to HermitShell and call the script like that:

FS1:
ls
AddBoot X[TAB][RETURN]

X is the first char from the UUID that was listed by 'ls'.
The TAB to complete the selection and RETURN...
 
I use this script with HermitShellX64 (EFI\Shells\HermitShellX64.efi)
Be aware that bcfg from HermitShell uses 1 for the first entry instead of 0 like many other shells.

Share this post


Link to post
Share on other sites

Medallio already got the AppleALC-OZM.kext and a patched DSDT.aml in another forum... ;)

https://www.hackintosh-inc.de/index.php/Thread/2768-Problem-Asus-p8z77m-high-Sierra/

 

I just want to understand!

 

Don't know why users redirect people to another website while the related answers are here in this topic, this should be the official topic for Oz, another Web-Oz-Topic-Site should be a Sub. I'm not and never against, but things should be like that.

 

But among that, the reply is already done, you came from somewhere and post another 30 mn of reading in Hac-In.de to download a simple file, but the man is still fresh Oz user and need maybe more informations about!

Share this post


Link to post
Share on other sites

I mean like in HFS partitions used to appear in my F12 Boot entries, Now with apfs mac drive with any nvram reset it goes away unless i use the method of manually loading the boot.efi from apfs mac disk.

If "manually loading" were equal to re type & entering those entry from shell after each boot sure that was pain man. But if we could just manually add it with bcfg (after some entries gone / nvram reset) then it must be worth to do imo. You can start to improve script provided by @uglyJoe to feed your needs. Or with @dosdude1 script (designed for auto boot). Or Bless (with some other tool there).

Share this post


Link to post
Share on other sites

I just want to understand!

 

Don't know why users redirect people to another website while the related answers are here in this topic, this should be the official topic for Oz, another Web-Oz-Topic-Site should be a Sub. I'm not and never against, but things should be like that.

 

But among that, the reply is already done, you came from somewhere and post another 30 mn of reading in Hac-In.de to download a simple file, but the man is still fresh Oz user and need maybe more informations about!

Since Insanely is not the only Hackintosh themed website some user refer to, your statement can only be a opinion...

 

As long as the user reacts to either one of the posts, I will be around and take him by the hand... ;)

Share this post


Link to post
Share on other sites

This is another script for adding the drivers from disk.
Put Ozmosis.efi, HFSPlus.efi, APFS.efi and HermitShellX64.efi (renamed to ShellX64.efi) into the efi root directory.
AddDriver can take a given FS number or is searching for ozmosis.efi to get the correct one.
The script puts ShellX64.efi as a boot entry and reboots the system.
After reboot I execute the AddBoot.nsh from above.
 
AddDriver.nsh

@echo -off
set -v EfiFs 0

## Read user input
if not x%1% == x then
  if exist fs%1%:\ozmosis.efi then
    set -v EfiFs %1%
    goto FSFOUND
  else
    goto END
  endif
endif

## Search FS
for %a run (0 9) 
  if exist fs%a:\ozmosis.efi then
    set -v EfiFs %a
    goto FSFOUND
   endif
endfor

goto END

:FSFOUND
echo Found driver at fs%EfiFs%:\

## Remove old drivers
bcfg driver rm 1
bcfg driver rm 1
bcfg driver rm 1

## Add drivers
bcfg driver add 1 fs%EfiFs%:\apfs.efi APFS
bcfg driver add 2 fs%EfiFs%:\hfsplus.efi HFSPlus
bcfg driver add 3 fs%EfiFs%:\ozmosis.efi Ozmosis
bcfg driver dump

## Add boot entry for Uefi Shell
set -v UefiShell fs%EfiFs%:\ShellX64.efi
if exist %UefiShell% then
  bcfg boot rm 1
  bcfg boot rm 1
  bcfg boot rm 1
  bcfg boot add 1 %UefiShell% "UEFI Shell"
endif

## Reboot
echo ""
echo Reboot system now?
pause
reset

:END
echo ""
echo ERROR: Driver not found!

Some more scripts to use with HermitShellX64:
Put them into EFI\Tools or any other directory that belongs to the shell environment (PATH). Type 'set' to verify.

Than you can execute them from anywhere in the shell.

Disable SIP

@echo -off

setvar -guid 7C436110-AB2A-4BBB-A880-FE41995C9F82 csr-active-config =67000000

setvar -guid 7C436110-AB2A-4BBB-A880-FE41995C9F82 csr-active-config

Enable SIP (except NVRAM)

@echo -off

setvar -guid 7C436110-AB2A-4BBB-A880-FE41995C9F82 csr-active-config =40000000

setvar -guid 7C436110-AB2A-4BBB-A880-FE41995C9F82 csr-active-config

Reset SIP (delete entry)

@echo -off

setvar -guid 7C436110-AB2A-4BBB-A880-FE41995C9F82 csr-active-config =

Share this post


Link to post
Share on other sites

Since Insanely is not the only Hackintosh themed website some user refer to, your statement can only be a opinion...

 

As long as the user reacts to either one of the posts, I will be around and take him by the hand... ;)

 

You're actually soliciting another site which is against the rules here and to top it off the link is only valid for registered users of that site.

Share this post


Link to post
Share on other sites

Since Insanely is not the only Hackintosh themed website some user refer to, your statement can only be a opinion...

 

As long as the user reacts to either one of the posts, I will be around and take him by the hand... ;)

 

 

Hahah, i clearly understand that the Motherboard has only 64 Mb Flash ROM and you give it a AppleALC-OZM.kext that has 958 KB !

 

He asked for ALC887 and you give him a bunch of codecs kext, hhh  :wink_anim:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By cvad
      View File Bootdisk Utility
      Make bootable USB Flash Disk for MAC OS X with Latest Clover bootloader revision fast and easy by one click! under OS Windows.
      Special utility from cvad & russian MAC community for new hackintosh users.
       
      Enjoy...
       
      For more information and complete instructions please see this topic.
       
      Anyone who likes the program, please support its Community Score.
       
       
      Feel free to "Rate File"
      Submitter cvad Submitted 04/28/2013 Category Bootloaders  
    • By cvad
      Make bootable USB Flash Disk for MAC OS X with Latest Clover bootloader revision fast and easy by one click! under OS Windows.
      Special utility from cvad & russian MAC community for new hackintosh users.
       
      Enjoy...
       
      For more information and complete instructions please see this topic.
       
      Anyone who likes the program, please support its Community Score.
       
       
      Feel free to "Rate File"
    • By blackosx
      Do you want to quickly find your boot log, or ever wanted to know which version of bootloader is installed on your disk(s), had the need to dump your BIOS from OS X, just curious about your own system setup or been asked to provide your setup information to others when asking for assistance?
       
      DarwinDumper is a useful collection of readily available tools, and scripts wrapped in an application framework giving you a convenient method to quickly gather a system overview of your hack or Mac. And rest assured that enabling the privacy option will mask sensitive data like the IOPlatformSerialNumber, IOPlatformUUID, IOMACAddress(s), USB Serial Number(s), SystemSerialNumber, serial-number, fmm-mobileme-token-FMM, MLB and ROM efi vars and CustomUUID in the dumped files and report.
       
      Current Release Version: 3.0.4, though latest beta DarwinDumper_v3.1.0b6



      The system dumps are saved to a folder or your choice, but defaulting to the same directory as the main application. You can choose to setup a symlink to make it simple to run DarwinDumper from the Terminal.
       
      There is an option to create an html report showing a complete overview of the dumps. This report will mostly just contain the text dumps as you'll find in the main dump directory, but for some dumps there is extra processing to try to present the information in a better way. For example, the Disk Partitions and Unique ID's dump will show a visual map of the disk layout, and the DMI Tables (SMBIOS) dump will show the data split by table type.
       

       
      Note: The html report does not contain all files from a complete dump so if seeking assistance for a problem and you wish to send someone a DarwinDump then you will want to send the complete dump directory and not just the .html report file.
       
      The following can be read and dumped by DarwinDumper:
      - ACPI tables.
      - Audio codec and further info.
      - Boot loaders and configuration files.
      - CPU info.
      - Device-properties.
      - Disk partition structure / info.
      - Disk sectors (hex).
      - DMI (SMBIOS).
      - EDID.
      - I/O Kit Registry.
      - EFI Memory Map.
      - EFI vars (some).
      - Kernel information
      - Kexts - (list of currently loaded kexts).
      - Memory.
      - NVRAM (both Apple specific and UEFI firmware variables).
      - SMC Keys.
      - LSPCI (PCI vendor & device codes) dumps.
      - Power (Sleep/Hibernate) settings.
      - RTC.
      - System Profiler.
      - System BIOS.
      - System Log(s).
      - Video BIOS.
       
      License:
      DarwinDumper is licensed under GNU General Public License, version 3.0 (GPLv3).
       
      Tools included:
      AnalyseVBIOS
      Copyright: Not Known. License: Not known Source: http://www.insanelymac.com/forum/topic/211294-information-on-vesa-modes-in-atinvidia-bios/   AppleIntelInfo Copyright: © 2012-2017 Pike R. Alpha. All rights reserved. License: Creative Commons Attribution-NonCommercial https://github.com/Piker-Alpha/AppleIntelInfo   atomdis Copyright: Michael Larabel @ Phoronix.com License: GPL Version 2 Source: http://www.phoronix.com/scan.php?page=article&item=amd_atombios_dumper   bgrep Copyright 2009 Felix Domke <tmbinc@elitedvb.net>. All rights reserved.   Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:      1. Redistributions of source code must retain the above copyright notice, this list of       conditions and the following disclaimer.      2. Redistributions in binary form must reproduce the above copyright notice, this list       of conditions and the following disclaimer in the documentation and/or other materials       provided with the distribution.   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.   The views and conclusions contained in the software and documentation are those of the authors and should not be interpreted as representing official policies, either expressed or implied, of the copyright holder.   Source: https://github.com/tmbinc/bgrep   bdmesg Copyright 2010 by Islam M. Ahmed Zaid. All rights reserved. License: GPL Version 2 Source: http://forge.voodooprojects.org/p/chameleon/source/tree/HEAD/trunk/i386/util/bdmesg.c   cmosDumperForOsx Created by rafirafi, revised extensively by STLVNUB License: Information not available Source: http://www.projectosx.com/forum/index.php?showtopic=2432&st=0&p=21522&&do=findComment&comment=21522   csrstat Created by Piker-Alpha Copyright: © 2015-2017) by Pike R. Alpha License: Information not available Source: https://github.com/Piker-Alpha/csrstat   dmidecode http://www.nongnu.org/dmidecode/ License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?showtopic=2488   dumpACPI Created by blackosx. Idea taken from PHPdev32's MacIASL. Source: https://bitbucket.org/blackosx/dumpacpi   edid-decode Created by Adam Jackson, revised by Andy Vandijck License: Information not available Original Source: http://cgit.freedesktop.org/xorg/app/edid-decode Revised Source: http://bit.ly/1qAzqxb   fdisk440 Apple Computer, Inc. License: APSL v2.0 Source: http://forge.voodooprojects.org/p/chameleonApplications/source/tree/HEAD/trunk/fdisk.tproj   FirmwareMemoryMap script Amit Singh (showbootermemorymap) License: Information not available Source: http://www.projectosx.com/forum/index.php?showtopic=2447&st=120&p=19329&&do=findComment&comment=19329   flashrom http://flashrom.org/Flashrom License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?s=&showtopic=2485&view=findpost&p=40285   getcodecid Copyright © 2012 AnV Software. All rights reserved. License: Information not available Source: http://www.insanelymac.com/forum/topic/285277-getcodecid-command-line-tool-to-detect-codec-id/   getdump Created by fassl?, modifications by Slice and AutumnRain? License: Information not available Source: https://svn.code.sf.net/p/voodoohda/code/tranc/getdump.c   gfxutil Copyright 2008 mcmatrix. All rights reserved. License: Information not available http://forum.netkas.org/index.php?PHPSESSID=q2isd338ihjjpcgbng7tne08pdv7tr4f&topic=64.0 Source: https://dl.dropbox.com/u/222155/gfxutil_source.zip   iasl Copyright © 2000 – 2014 Intel Corporation. License: Information not available Source: https://github.com/acpica/acpica   ioregwv Apple Computer, Inc. License: APSL v2.0 Source: https://bitbucket.org/blackosx/ioregwv   lzma Copyright © 2013 Igor Pavlov. License: GNU Lesser General Public License Source: http://www.7-zip.org/sdk.html   lzvn Copyright: © 2014 Apple Computer, Inc. All rights reserved. License: APSL Credit: Piker-Alpha, Andy Vandijck, MinusZwei. https://github.com/Piker-Alpha/LZVN   MacGap2 Created by Tim Debo. All rights reserved. License: MIT Source: https://github.com/MacGapProject/MacGap2   nvram Apple Computer, Inc. License: APSL v2.0 Source: https://bitbucket.org/blackosx/nvram   oclinfo Copyright © 2009 cmf License: GPL Version 2 Source: http://www.insanelymac.com/forum/topic/170796-opencl-info/   pciutils driver (DirectHW.kext) DirectHW is Copyright © 2008-2010 coresystems GmbH License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?showtopic=2480   pciutils lspci Copyright © 1997--2008 Martin Mares License: GPL Version 2 Source Code: https://kernel.googlesource.com/pub/scm/utils/pciutils/pciutils.git/+/master   Macpmem driver (Macpmem.kext) Copyright © 2007-2011 Volatile Systems. Copyright 2013-2014 Google Inc. All Rights Reserved. License: GPL Version 2 Source Code: https://github.com/google/rekall/tree/master/tools/osx/MacPmem]https://github.com/google/rekall/tree/master/tools/osx/MacPmem   RadeonDump Created by Dong Luo. Copyright 2008. All rights reserved. Modified by Andy Vandijck License: Information not available Source: http://www.insanelymac.com/forum/topic/282794-darwindumper/page__st__120?do=findComment&comment=1920068   radeon_bios_decode Created by Dong Luo. Copyright 2008. All rights reserved. License: Information not available Source: http://www.insanelymac.com/forum/topic/282794-darwindumper/page__st__120?do=findComment&comment=1920068   smbios-reader http://www.nongnu.org/dmidecode/ License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?showtopic=2208   SMC_util3 Copyright © 2006 devnull  License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?s=&showtopic=2447&view=findpost&p=23230   VoodooHDA.kext Created by fassl?, modifications by Slice and AutumnRain? License: https://sourceforge.net/p/voodoohda/code/HEAD/tree/tranc/License.h]https://sourceforge.net/p/voodoohda/code/HEAD/tree/tranc/License.h Source: https://sourceforge.net/p/voodoohda/code/HEAD/tree/]https://sourceforge.net/p/voodoohda/code/HEAD/tree/   x86info Written to succeed CPUID by Phil Karn (KA9Q). Contributed to by various people. OS X compatability by Slice License: GPL Version 2 Original Source: https://github.com/kernelslacker/x86info Revised Source: http://www.projectosx.com/forum/index.php?s=&showtopic=2447&view=findpost&p=41134  
       
      Running DarwinDumper from the command line:
      From Terminal, you can initiate DarwinDumper by running the following script directly.
       
       
       
      /DarwinDumper.app/Contents/Resources/public/bash/script.sh To help with this, the UI has a Symlink option which you can click to create a symbolic link which points to the above script. DarwinDumper can then be subsequently run from the command-line by loading a new Terminal window and typing darwindumper followed by return.

      Credits (in alphabetical order):
      Adam Jackson, Amit Singh, Andy Vandijck, Apple Inc., arsradu, bcc9, blackosx, cmf, DieBuche, dmazar, Dong Luo, droplets, ErmaC, Felix Domke, Google Inc., Intel Corporation, InsanelyDeepak, JrCs, Kabyl, Kynnder, Martin Mareš, mcmatrix, Michael Larabel, Mickey1979, phcoder, Phil Karn, Piker-Alpha, rafirafi, гык-sse2, Slice ,sonotone, STLVNUB, THe KiNG, Trauma, Volatile Systems, xsmile, !Xabbu.
       
      DarwinDumper was originally inspired as an open project by Trauma, it has remained an open project and please keep it an open project, so if you make any changes or additions to it then please share your work here.
       
      Please report any feedback, requests or bugs.
       
      Please note:
      DarwinDumper v3 requires OS X 10.9 and newer to run in the Finder, though it should work from the command line okay on older OS versions.

      The following link retains the download for v2.9.9.2 for older OS versions.

      DarwinDumper Download
    • By heiza
      Ryzen 7 2700X
      ASUS Prime X470 Pro
      32GB G.Skill Ripjaws V DDR4-3200
      ASRock Phantom Gaming Vega 56
       
      My motherboard doesn’t have an option for 4G encoding. And boot modes are listed as ”Windows UEFI Mode” and “Other OS”.
       
    • By ErmaC
      Slice is glad to present a new EFI bootloader.

      CLOVER
      Now version 2 rEFIt based.


      It is open source based on different projects: Chameleon, rEFIt, XNU, VirtualBox. The main is EDK2 latest revision.
      I also want to thank all who help Slice with the development. Credits and copyrights remain in the sources.
      https://sourceforge.net/projects/cloverefiboot/?source=directory
      There is a WIKI 
      http://clover-wiki.zetam.org/
      Main features:


      If you have a question please provide outputs from DarwinDumper (formed from Trauma tool). Thanks Trauma!
      Continued by blackosx and STLVNUB.
      Post#2 CloverGrower - create Clover by yourself Post#3 Downloads Post#4 Installation of the bootloader Post#5 How to do UEFI boot Post#6 How to use - common words Post#7 Calculator for Automatic DSDT fix Post#8 Instructions for GraphicsInjector Post#9 ATIConnector patching Post#10 Any kexts patching with some Samples Post#11 CustomEDID Post#12 Hiding unnecessary menu entries Post#13 Instruction for DSDT corrections to do DeviceInjection works Post#14 Development Post#15 Themes Post#16 About kexts injection Post#17 Instructions for P- and C-states generator Post#18 Patching DSDT to get Sleep working Post#19 CPU settings and geekbench Post#20 ACPI tables loading Post#21 DSDTmini Post#22 Custom SMBios Post#23 F.A.Q. Post#24 iCloudFix Post#25 Using mouse. Post#26 How to make orange icons to be metallic Post#27 How to make software RAID (by Magnifico) Post#28 How to modify InstallESD.dmg (by shiecldk) Post#29 Config.plist settings Post#30 Using extra kexts and skipping kernelcache Post#31 Choosing EFI drivers Post#32 Configuration files Post#33 Automatic config.plist creating Post#34 Custom DSDT patches Post#35 How to do sleep/wake working with UEFI BOOT Post#36 DeviceID substitution (FakeID) Post#37 Using Custom OS Icons Post#38 Hibernation Post#39 Floating regions Post#41 Property List Editor Post#42 Blocking Bad Kext Post#43 AAPL,slot-name Post#44 FakeCPUID for unsupported CPU Post#45 Multiple Boot Options - to write into UEFI BIOS boot menu Post#46 How to install Windows UEFI Post#47 How to speedup Clover boot Post#48 Info.plist patching Post#49 Arbitrary device injection Post#50 Non-Standard Legacy Boot Files Post#51 Reboot to Windows UEFI from Mac OSX Post#52 Deprecated Features, part 1 Post#53 Using UDK2018 Post#54 Device Properties Post#55 Scalable themes Post#56 How to search Clover mistakes (bisection) Post#57 Deprecated features, part 2 Post#58 Programming Code Style -----------------
       
      Slice:
      I edited all posts in the thread to correspond to actual Clover revision.
      Please install Clover at least 2652 and use new instructions.
×