Jump to content
xpamamadeus

Ozmosis

6,210 posts in this topic

Recommended Posts

I tried those two files and included them in my bios but alas same KP. Thanks for explaining how to go into Verbose mode by pressing win-v button while clicking installer usb drive. Do you think having a broadcom wifi apple card and a NVME card could do this? Think I have to go old school and uninstall every device in bios and physically and see if the installer turns over..

 

Thanks

Share this post


Link to post
Share on other sites
Advertisement

Do you confirm that with exact same settings and stuffs inside bios and from Bios settings you have same kernel panic: HighSierra installer and Sierra already Installed?

 

Or you can easily without problem boot into your Sierra HD, but not with HighSierra Installer? 

Share this post


Link to post
Share on other sites

Like I said with updated Oz2a, modified fakesmc (yours and mine), and ozdefaults.plist (yours and mine based on your suggestions) I can easily load Sierra vanilla installer and an installed installation of Sierra. Just not High Sierra beta.

 

Going to take a break from this as have no idea and out of time..

 

Thanks for all your help Ammoune. Thank you.

Share this post


Link to post
Share on other sites

@davidm71 If you boot with IGPU for the High Sierra Installer, can you change the AAPL,ig-platxxxxx with this: 

<key>AAPL,ig-platform-id</key>
<integer>220332035</integer>

 

 

 

 

@everyone This RehabMan Sensors worked for me, and have all kexts from bios running actually, compatible ITEXXXXX:

 

SMC 2.15f2 RehabMan Sensors 2.15f2.zip

 

SMC 2.22f16 : RehabMan Sensors 2.22f16.zip

 

Modified by PrefSetter

 

Share this post


Link to post
Share on other sites

Well included the SMC 2.15f2 file and I got a little farther this time dropping MATs and including my DSDT on the Clover usb stick but ultimately it failed to load the installer at the same ACPICPU error KYNYO had and reading those past posts there was mention of this new Oz patch not being compatible with haswell and Z87?? Anyhow after that last attempt my bios got corrupted somehow and the motherboard auto flashed the other backup copy.

 

Not sure why maybe one too many flashes probably.

 

Thanks

Share this post


Link to post
Share on other sites

Well included the SMC 2.15f2 file and I got a little farther this time dropping MATs and including my DSDT on the Clover usb stick but ultimately it failed to load the installer at the same ACPICPU error KYNYO had and reading those past posts there was mention of this new Oz patch not being compatible with haswell and Z87?? Anyhow after that last attempt my bios got corrupted somehow and the motherboard auto flashed the other backup copy.

 

Not sure why maybe one too many flashes probably.

 

Thanks

You need to drop the MATS table, and any other ACPI tables that have unprintable chars in the header.

Share this post


Link to post
Share on other sites

In case you have panic 0 cpu caller you have to drop MATS by selecting drop MATS table inside clover ACPI patching menu.

Share this post


Link to post
Share on other sites

@ the clover gui menu, press F4 and boot into another working OS X, in the acpi/dump folder, search for the MATS.aml open it with MacIASL, delete all things except the header, compile save! But, i'm quiet sure, that this error doesn't have to come if ACPI tables are seriously modified!

 

You can read in the first post made with the help of FredWst, that there's some tables that contain external declarations, and devices, methods and scopes.

 

So you should search in all freeform modules inside your bios, extract their raw content, and rename the .raw as 1.aml, 2.aml until the last one, then open them one by one. If MacIASL doesn't show something or crash just delete them, if show something like ACPI table rename it as it's real name, after that just remember each one from each module it was extracted, and search for the files that contain devices that you want rename, group them all in a simple folder, decompile them, and you should begin the patching in the dsl files.

 

take care for the IASL version made by the manufacturer, you have to use the same, but for you the IASL 5.0A is fine! After patching dsl files save them as aml then rename .aml to .raw!

Insert them into their modules one by one, for DSDT use DSDT2BIOS by FredWst, and you should be fine.

 

Another serious think, if you will use _DSM search in the scopes and device if it's already there in the device you want to patch and delete it, or you will not be able to boot OS X sometimes Windows to.

 

It's preferable to only add _DSM patch and correct the errors only, keep them as they are!

 

Devices that you can rename are:
GFX0 to IGPU
PEGP to GFX0
B0D3 to HDAU
SAT0 to SATA if you want!

It will eat your time, but ones done, you will forget some problems!


Sent from my iPhone using Tapatalk

Edited by ammoune78

Share this post


Link to post
Share on other sites

Just finished the last High Sierra install with only Oz and all goes well, simple and quiet no errors but didn't installed it in APFS, as it doesn't work for me, even all APFS.ffs or .efi tried! I will keep the system as is right now, the RehabMan Sensors work fine, kexts in the bios also! Three SMC headache modifying days, i'm so tired, will take some rest, sleep like died! 

Share this post


Link to post
Share on other sites

Sounds like a complicated adventure to go through. I'm game however. So far I can drop MATs through Clover and get a lot of Verbose messages as if its doing something this time but still stalls out on an endless Firewire guid 000000000000 invalid error message. I'll try to edit the dsdt and edit the headers like you said Ammoune. Thanks.

Share this post


Link to post
Share on other sites

I don't know my friend what your board have with HS, but i think you've many devices installed on! Can you update your signature with entire things you have on your MoBo. It's sadly abnormal, to not run HS. 

Share this post


Link to post
Share on other sites

Unfortunately I found out the hard way that using apfs.ffs in the firmware prevents Oz menu from loading usb items.

I will test tonite if removing the APFS drive without removing apfs.ffs from firmware still shows the same behavior

Share this post


Link to post
Share on other sites

Hi,

 

I'm going to take another stab at this and try removing disablerkext.ffs and Injector.Rev-1.3 from the firmware and see what happens. Perhaps they are not compatible? About my hardware configuration:

 

GA-Z87X-UD5H Gigabyte Board with 4670K CPU (Not overclocked)

Video: Nvidia GT-740

Wifi: Apple broadcom 802.11 AC BCM94360CD card

Pulled the NVME Card for testing and same error.

 

 

Thats about it..

Share this post


Link to post
Share on other sites

Ok, in the OzmosisDefaults did you enabled Nvidia injection? And in boot args did you disabled the driver?

DisableNvidiaInjection= NO

nvda_drv=0

 

 

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Ammoune,

 

Not sure about that.. possibly not.. though I have made it to the promised land and was able to load the installer. Had to remove Disabler Kext, Drop MATS, enable and use HD 4600 igpu as this time got farther and my screen went black using my nvidia card. Also found an EFI folder someone posted somewhere for Clover and HS loading which I used. So right now HS is installing as we speak. Thank you for your help!

Share this post


Link to post
Share on other sites

An interesting finding by our Russian hacker @savvamitrofanov about FirmwareFeatures(Mask) value burned into Apples firmware updates

 

IM142_0118_B44_LOCKED.scap: EFI updates available from 10.12.5 update.

 

FirmwareFeaturesMask: 0000000000000444         mov        eax, 0xff1fff3f

FIrmwareFeatures: 000000000000044d         mov        eax, 0xe007e137

 

SMC Version (system): 2.15f7

 

ce583e1d39.png

Share this post


Link to post
Share on other sites

Bad news. After install I still needed Clover and drop MATS to continue reboots however when I finally tried to load the finished install it would stall out again at FireWire Guid 000000000 invalid..

Share this post


Link to post
Share on other sites

have you disabled the via firewire in bios ?

Share this post


Link to post
Share on other sites

An interesting finding by our Russian hacker @savvamitrofanov about FirmwareFeatures(Mask) value burned into Apples firmware updates

 

 

 

IM142_0118_B44_LOCKED.scap: EFI updates available from 10.12.5 update.

 

FirmwareFeaturesMask: 0000000000000444         mov        eax, 0xff1fff3f

FIrmwareFeatures: 000000000000044d         mov        eax, 0xe007e137

 

SMC Version (system): 2.15f7

 

ce583e1d39.png

 

Interesting if I can open this file  :D , but don't know app used for :rolleyes: ?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Rohan20
      Opencore is running really really slow on Catalina 10.15.4. So It was running perfectly before I put the ssdt-pnlf for enabling Brightness control. it is running really slow and I verified my config with the sanity checker and its all correct. can someone please help. I am attaching my oc folder.

       
      https://www.dropbox.com/s/drkek0eaz19ina5/OC.zip?dl=0
       
    • By StarFighter_77
      I built this hack years ago now. Started with Lion, now on El Cap. I want to update now to High Sierra.

      I think I messed up my Clover when I downloaded the update .pkg and just installed it without taking my time or customizing the install. Was on Clover r3423, now I think I'm on r5104

      I've been searching and reading this site and others for a few days before making this thread, but I need help compiling what I've learned to get my system running correctly again and ready to update to High Sierra. Then, eventually, I want to update my graphics card, switch to UEFI (if necessary) and update to Mojave.

      I couldn't get system to boot. Could get to Clover and all the options, except the Shell... I hit enter on the Shell and I get black screen and nothing.

      The only way I got it to boot was to add -v to boot args, and change smbios from 14,2 to 13,2. Not sure why that worked still. Also I'm running two monitors, but I can only now run one of them off the Intel 3000 Graphics and the second one off my GFX Card.

      So now I'm afraid to shut down or reboot.... I could really use some help with Clover.

      I'm pretty sure my config file in Clover is not right. Also, some of the files in my Clover backups are not in the new Clover install. (2.5k 5104)

      If someone could please take a look at the files I've attached and help me sort this out, I would be grateful. Thank you, Thank you, Thank you.

      I've attached
      - The last boot log
      - The current Clover folder from the EFI partition after performing Clover update. (.zip)
      - The Clover backup that was working before Clover update (.zip)
      - Library/Extensions Folder (screen shot)
      - System/Library/Extensions Folder (.zip)

      Here is my current hardware:

      Mobo: GIGABYTE GA-Z68MX-UD2H-B3

      CPU: Intel Core i7-2600K

      GPU: GIGABYTE ATI Radeon HD6870 1GB DDR5 2DVI/HDMI/2x

      RAM: Corsair Vengeance Blue 16 GB DDR3 SDRAM Dual Channel Memory Kit CMZ16GX3M4A1600?C9B

      HD0 (for OS and Apps): OCZ Technology 120 GB Vertex Series SATA II Solid State Drive

      HD1 (file storage, Adobe scratch disk): Samsung 1 TB Spinpoint 7200 RPM 32MB Cache SATA

      BURNER: LG CD/DVD Burner Model GH22NS50

      CPU COOLER: Corsair Cooling Hydro Series H50 All in One High-performanc?e CPU Cooler CWCH50-1

      P/S: Antec CP-850 850 Watt CPX Power Supply Unit

      CASE: Antec Performance One P183 V3 Case
      CLOVER.zip
      CloverBackup.zip
      bootlog.txt

      S_L_E.zip
    • By dgsga
      Can I propose a new subforum be created for the new OpenCorePkg OpenCore front end being created by vit9696 and others, it is a fantastic piece of work:
      https://github.com/acidanthera/OpenCorePkg
      Even at version 0.1 it runs my Mojave 10.14.4 setup very nearly flawlessly. It consists of a 10KB bootstrap BootX64.efi and a 200KB OpenCore.efi OS loader. All configuration is done using a very well documented config.plist 
       
       
    • By cvad
      View File Bootdisk Utility
      Make bootable USB Flash Disk for MAC OS X with Latest Clover bootloader revision fast and easy by one click! under OS Windows.
      Special utility from cvad & russian MAC community for new hackintosh users.
       
      Enjoy...
       
      For more information and complete instructions please see this topic.
       
       
       
       
      Feel free to "Rate File"
      Submitter cvad Submitted 04/28/2013 Category Bootloaders  
×