Jump to content
xpamamadeus

Ozmosis

5,985 posts in this topic

Recommended Posts

No worries.

 

I assumed that with the files you discussed above, you might have been in the loop or involved in the ozmosis project. Im still catching up with being off the forums for four or five years.

 

Apart from this and the quo board thread, is there another forum or thread that you are aware of that discusses ozmosis or provides source?

 

I have a few other UEFI boards around. I might give your guide a try as well.

I am not involved in Ozmosis in any way.

Dont know for any place that we can talk about ozmosis,if u find one plz share here.

 

Try this guide if u like and share how it goes for u.

Share this post


Link to post
Share on other sites
Advertisement

I have, and Asus uses AMI Aptio UEFI BIOS so it should work. :D

 

I set about injecting modules in to my Z68 BIOS but then realised that in order to have this a fully functioning "hack" BIOS (AppleHDA excluded) I'd also have to replace the DSDT.

 

This got me wondering if the usual DSDT hacks (like device renames and HDEF/HDMI/SBUS injection) would have any adverse effects on a Windows dual-boot.

 

I'm leaning towards staying with Chameleon as it's more flexible in these situations, but it's still really cool to think that it's possible to have everything rolled into the BIOS.

Share this post


Link to post
Share on other sites

Kudos to Xpamamadeus for your initial and continued work with Ozmosis and to the other guys who appear to have contributed a great deal and I am referring to Stlvnub and AnV, and others too numerous to mention.

 

A great way to go and I might have a go one day on my Asus Z88.

 

Great work guys - it is amazing what can be achieved, when you set your mind to it.

Share this post


Link to post
Share on other sites

According to the Disassembly, Ozmosis has Video support for X3100 just to mention one, so I think it is not limited to "newer" motherboards, even if they have Bios.

It has an "Embedded" mode, for UEFI Firmware, or  "Standalone" mode, for UEFI or stock standard Duet based bios loader(untested), and function the same.

It does not need an edited DSDT, well not on my board. But I did need to edit to get HD4000 working properly.

 

 
This is one nice piece of kit, all I can say is well done to the developers, whoever you are.

Share this post


Link to post
Share on other sites

This is amazing.  Just finished installing it to my P9X79 PRO.

 

One questions--how do I pass boot args to the OS?  Edit the com.apple.boot.plist?  Somewhere else?  My motherboard needs npci=0x2000 to boot up, so I get the Apple loading screen, but then it just fades and restarts.

Share this post


Link to post
Share on other sites

Ok here is a bash script that you can use, just replace the "Replace"

#!/bin/bash
#SMBIOS
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BiosVersion=MM61.88Z.0106.B00.1208091121
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProductName=Macmini6,2
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:SystemSerial=replace
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProductFamily=Macmini
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProductId=Mac-F65AE981FFA204ED
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BaseBoardSerial=Replace
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:SystemSKU=MD389LL/A
#OzmosisNVRAM
sudo nvram 7C436110-AB2A-4BBB-A880-FE41995C9F82:boot-args="-fakesmc-use-nvram"

#APPLE
sudo nvram 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:ROM=Replace e.g %90%90%9090%90
#4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:MLB
sudo nvram 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:FirmwareFeatures=%C0%00%7F%FF
sudo nvram 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:FirmwareFeaturesMask=%C0%00%14%03 

#CODE
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BiosVersion
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BiosDate
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProductName
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProductFamily
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:SystemVersion
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:SystemSerial
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProductId
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BoardVersion
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BaseBoardSerial
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:Manufacturer
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProcessorSerial
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:SystemSKU
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BaseBoardAssetTag
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ChassisAssetTag
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:CpuType
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:EnclosureType

#CODE
#4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:ROM
#4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:MLB
#4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:FirmwareFeatures
#4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:FirmwareFeaturesMask

The "ROM" is your Lan wired MAC address.

Ozmosis uses it's own nvram to pass boot-args.

 

Your Firmware must support NVRAM saving, sometimes you may need to backtrack a few versions to find one that does, then any NVRAM settings will stick.

I had to go from F16g to F15

 

 

 

Anyone wishing to do this mod, may find this handy

#205

Turns kexts into Ffs for inclusion into Firmware.  ;)

Share this post


Link to post
Share on other sites

Ok here is a bash script that you can use, just replace the "Replace"

#!/bin/bash
#SMBIOS
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BiosVersion=MM61.88Z.0106.B00.1208091121
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProductName=Macmini6,2
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:SystemSerial=replace
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProductFamily=Macmini
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProductId=Mac-F65AE981FFA204ED
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BaseBoardSerial=Replace
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:SystemSKU=MD389LL/A
#OzmosisNVRAM
sudo nvram 7C436110-AB2A-4BBB-A880-FE41995C9F82:boot-args="-fakesmc-use-nvram"

#APPLE
sudo nvram 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:ROM=Replace e.g %90%90%9090%90
#4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:MLB
sudo nvram 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:FirmwareFeatures=%C0%00%7F%FF
sudo nvram 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:FirmwareFeaturesMask=%C0%00%14%03 

#CODE
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BiosVersion
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BiosDate
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProductName
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProductFamily
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:SystemVersion
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:SystemSerial
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProductId
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BoardVersion
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BaseBoardSerial
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:Manufacturer
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProcessorSerial
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:SystemSKU
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BaseBoardAssetTag
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ChassisAssetTag
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:CpuType
#4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:EnclosureType

#CODE
#4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:ROM
#4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:MLB
#4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:FirmwareFeatures
#4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:FirmwareFeaturesMask

The "ROM" is your Lan wired MAC address.

Ozmosis uses it's own nvram to pass boot-args.

OK, and how do I add npci=0x2000 or its equivalent? 

There has to be a way to do it in the BIOS image, but yes.  Adding the boot-args to the com.apple.boot.plist does succeed in passing them on to the OS.

 

However, that method means I can not boot an App Store download =/

Share this post


Link to post
Share on other sites

Here you go...

An Ozmosis firmware for P8H77-M LE.

I tested it and it works.

 

You can flash it using FTK under Windows or the new DPCIManager (which uses flashrom) under OS X.

 

Alternatively you can download it here:

https://www.dropbox.com/s/8mz31poubfk1vof/P8H77MLE_Ozmosis.zip

 

PMPatch is applied on the BIOS.

It also has mods for Asus SLIC and custom LAN MAC address (de:ad:ba:be:c0:de)

 

Enjoy :D

a few questions, as i want to multiboot windows 7 and osx on this same exact board.

 

1. any adverse effect on my windows installation?

2. can this be used using asus updater or via FTK only?

3. i have already downloaded your other modified BIOS for this same board (the one which came with DSDT), do i use that or this osmosis?

Share this post


Link to post
Share on other sites

a few questions, as i want to multiboot windows 7 and osx on this same exact board.

 

1. any adverse effect on my windows installation?

2. can this be used using asus updater or via FTK only?

3. i have already downloaded your other modified BIOS for this same board (the one which came with DSDT), do i use that or this osmosis?

1. I use Windows 7 in UEFI install.

It works in that case.

Don't know about legacy Windows boot, haven't tested that.

It works just fine.

2. It's a binary, not a cap file.

You can flash it with flashrom under OS X or use FTK on Windows.

3. This Ozmosis contains a mod to directly boot OS X.

You can thus choose.

Share this post


Link to post
Share on other sites
How to change smbios to macmini6,2?
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BiosVersion=MM61.88Z.0106.B00.1208091121
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProductName=Macmini6,2
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:SystemSerial=xxxxxxxxxxxx
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProductFamily=Macmini
sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:ProductId=Mac-F65AE981FFA204ED

xxxxxxxxxxxx=serial that need to be generated using clover comfigurator or chameleon wizard. 

Hope this will work for u.

Enjoy

 

 

Hello xpamamadeus,

 

setting the nvram variables does not survive a reboot.

Even settings boot-args='dart=0 -v' is removed from nvram after reboot.

 

Is there any trick to unlock write-access into nvram?

My board is ASUS P8Z77-V LX UEFI ver.2204.

 

Also one question regarding HermitShell - how can it be access?

 

best regards

Share this post


Link to post
Share on other sites

OK, and how do I add npci=0x2000 or its equivalent? 

There has to be a way to do it in the BIOS image, but yes.  Adding the boot-args to the com.apple.boot.plist does succeed in passing them on to the OS.

 

However, that method means I can not boot an App Store download =/

sudo nvram 7C436110-AB2A-4BBB-A880-FE41995C9F82:boot-args="-fakesmc-use-nvram npci=0x2000"

 

Your Firmware MUST support NVRAM writing, sometimes you need to backtrack a few versions and find one that does.

 

Share this post


Link to post
Share on other sites

Hi,

 

I have a few questions guys,

 

What is the point of this? From what I can tell you still need all the files and setting that are used in the normal hackintosh bootloader's. All we are doing is making it harder to change settings / bootloader once we implement it into the BIOS.

 

I can see that it would be nice not to have to modify the Apple installers to install the OS and just boot the USB drive right after making it from the App store... But the con's do out weigh the pro's

 

Is there anything new here? Am I missing something or is it just a new way to play around with?

 

Let me know what you think,

 

Thanks

 

 Ross

Share this post


Link to post
Share on other sites

 

sudo nvram 7C436110-AB2A-4BBB-A880-FE41995C9F82:boot-args="-fakesmc-use-nvram npci=0x2000"

 

Your Firmware MUST support NVRAM writing, sometimes you need to backtrack a few versions and find one that does.

 

 

Curiosity aside, my firmware does support NVRAM writing booting from chameleon, only osmosis does not access the written values.

 

@Ross, the pro is you don't need a bootloader installed to a HFS+ partiton, you can choose OS X out of bios bootmenu!

That's cluesless. FakeSMC is load from an FFS module. Additional you can add other kexts as UEFI modules, so you can make

a very stable and static mod.

 

The con in the case of osmosis is, that it's not opensource and build for a specific gigabyte board.

 

Loading chameleon or Clover as an UEFI bootloader would be the most awesome stuff I guess ;)

I found some guys already working on it at projectosx.

Share this post


Link to post
Share on other sites

Curiosity aside, my firmware does support NVRAM writing booting from chameleon, only osmosis does not access the written values.

Can you show your boot log and what are your specs? (besides Gender)

Share this post


Link to post
Share on other sites
29:165 00:000 Found Mac OS X 10.8.4 (10.8.4) 12E55
29:165 00:000 Found 7C436110-AB2A-4BBB-A880-FE41995C9F82:boot-args "<null string>" (0)
29:165 00:000 Found LoadedImage->LoadOptions "<null string>" (0)
29:165 00:000 LoadedImage->LoadOptions "slide=0" (16)

Try sudo nvram 7C436110-AB2A-4BBB-A880-FE41995C9F82:boot-args="-v"

then type sudo nvram 7C436110-AB2A-4BBB-A880-FE41995C9F82:boot-args 

It should say "-v"

Reboot and check bootlog

or run sudo nvram 7C436110-AB2A-4BBB-A880-FE41995C9F82:boot-args again and see if it says "-v"

if not you need to file FW that works (1701 or 1440)

You may loose a few features but you will gain more ;)

Share this post


Link to post
Share on other sites

Thanks for that STLVNUB.  It does indeed appear that this bios revision (4302) does not allow me to write to NVRAM on my P9X79 Pro.  I will check earlier versions to see if they allow it.

 

This may be a silly question, but if earlier BIOS versions routinely gain or lose the ability to write to NVRAM from within the OS, then might we not edit that ability back into the latest BIOS versions ourselves?

Share this post


Link to post
Share on other sites
29:165 00:000 Found Mac OS X 10.8.4 (10.8.4) 12E55
29:165 00:000 Found 7C436110-AB2A-4BBB-A880-FE41995C9F82:boot-args "<null string>" (0)
29:165 00:000 Found LoadedImage->LoadOptions "<null string>" (0)
29:165 00:000 LoadedImage->LoadOptions "slide=0" (16)

Try sudo nvram 7C436110-AB2A-4BBB-A880-FE41995C9F82:boot-args="-v"

then type sudo nvram 7C436110-AB2A-4BBB-A880-FE41995C9F82:boot-args 

It should say "-v"

Reboot and check bootlog

or run sudo nvram 7C436110-AB2A-4BBB-A880-FE41995C9F82:boot-args again and see if it says "-v"

if not you need to file FW that works (1701 or 1440)

You may loose a few features but you will gain more ;)

 

I'm sorry to say the settings are gone on reboot :(

Share this post


Link to post
Share on other sites

Then you need to find previous FW that works.

Best to make a signature with your specs as well.


I'm sorry to say the settings are gone on reboot :(

Further to above, can you supply your Firmware file, want to check something.

Share this post


Link to post
Share on other sites

hi

iMessage Works again!!!

i had to change the BaseBoardSerial number,

like this

sudo nvram 4D1FDA02-38C7-4A6A-9CC6-4BCCA8B30102:BaseBoardSerial=C02140302XXXXXXX

MLB shows now 17 Bytes, befor shows 12 Bytes

06:343 00:000 Setting RS+BS 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:MLB 17 bytes - Success
06:343 00:000 Setting RS+BS 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14:ROM 6 bytes - Success

Xp thank you for a nice theard!

Share this post


Link to post
Share on other sites

Thx for THE hard work.

I tried to make a modded bios myself.

And got iT working, but with one problem. Nvram didn't stick.

 

Now I finaly found THE bios wich holds THE nvram.

ITS bios f2f.

I am busy modding iT als we speak.

Let you al know how iT Will turn out

Share this post


Link to post
Share on other sites

@STLVNUB

 

If I can find a reasonably priced case, power supply and Ram I might have a go at using the Gigabyte Z77MX-D3H TH with Ozmosis, as you have had great success with a very similar motherboard.

 

The important issue is saving nvram - looking at the BIOS available ex GB your board has far more available, mine has only three F6b, F5, and F3. I see the latest official BIOS for your board is F16d.

 

I am asking this as I am slightly wary of buying the bits I need, if the BIOS available lock the OS writing to nvram.

 

So question - Have you any thoughts to guide me on this issue?

 

Thanks

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   1 member

  • Similar Content

    • By Slice
      Now I want to add vector graphics support in Clover. See rev 4560 and later.
      It is not working yet but designers may begin to create Vector Themes.
      It supposed to consist of SVG elements and has design size. It will be rendered to any screen size scaled from design size.
       
      What application in macOS can create SVG graphics?
      Inkscape is not working in macOS 10.11+. Pity.
      LibreOffice Draw works with SVG but buggy.
      Boxy SVG cost 10$ but looks good enough. It creates the best in simplicity files and have more then enough features.
      Illustrator is good but expensive.
       
      How to improve SVG file?
      Clover has restricted support for SVG. It is your job to make compatible file and as small as possible to speedup rendering.
      Some helps:
      Help:Inkscape – From invalid to valid SVG Inkscape files
      From invalid to valid SVG Adobe Illustrator files
      From invalid to valid SVG files of other editors: BKchem, ChemDraw and CorelDRAW
      Help:Illustrator – Assistance with creating and saving SVG images in Adobe Illustrator that will pass W3C validation
      User:Quibik/Cleaning up SVG files manually
      Later I will write own instructions specific to Clover abilities.
       
      How to create SVG fonts?
      You can google to find ready-to-use SVG fonts.  I found some problems with too beaty fonts: slow rendering and overflow crash. Be careful.
      You can get ttf or otf fonts and convert them into svg by using online WEB services. Not a problem to google.
      But then I want to find a way to simplify the font to reduce a size and speedup rendering.
      You can create own font by FontForge It is opensource and available for Windows, Mac and GNU+Linux. It creates otf font which you can convert to svg font.
       
       
    • By apianti
      Just so you all know I actually have done something. I have pushed the source to both my github and to sourceforge, please commit to the experimental branch and I will merge it into the stable branch once it is safe. Also, nothing meaningful happens yet so don't get too excited. Only the Visual studio build works right now. I haven't set up the Xcode or Makefile builds yet, I'm trying to do them now.
       
      https://github.com/apianti/Clover
      https://sourceforge.net/p/cloverefiboot/Clover
       
      IA32/X64/ARM/ARM64 testing ISO (6/7/2018): Clover-3.0-experimental.iso
    • By cvad
      Bootdisk Utility Make bootable USB Flash Disk for MAC OS X with Latest Clover bootloader revision fast and easy by one click! under OS Windows.
      Special utility from cvad & russian MAC community for new hackintosh users.
       
      BDU_v2.1.2018.023b.zip
      MakeCloverBDUReadyZip.bat.zip
      Enjoy...
       
       
       
      Feel free to "Rate File"
      Submitter cvad Submitted 04/28/2013 Category Bootloaders  
      BDU_v2.1.2015.016b.zip
      BDU_v2.1.2015.018b.zip
      BDU_v2.1.2016.019b.zip
      BDU_v2.1.2016.020b.zip
      BDU_v2.1.2017.021b.zip
      BDU_v2.1.2017.022b.zip
    • By Subirats345
      Hi guys! I'm new on Hackintosh and I have a little problem (I think it's little). Yesterday I made my first hackintosh on a Xiaomi Notebook Air. All went well, but after an update (from High Sierra to 10.13.4) after the first reboot, in the bootloader doesn't appear nothing. I tried with the USB with Clover but I only can reinstall the entire system, I can not boot the system. It has a solution or I need to reinstall all again?

      Thanks a lot and sorry if the question is fool.

    • By ErmaC
      Slice is glad to present a new EFI bootloader.

      CLOVER
      Now version 2 rEFIt based.


      It is open source based on different projects: Chameleon, rEFIt, XNU, VirtualBox. The main is EDK2 latest revision.
      I also want to thank all who help Slice with the development. Credits and copyrights remain in the sources.
      https://sourceforge.net/projects/cloverefiboot/?source=directory
      There is a WIKI 
      http://clover-wiki.zetam.org/
      Main features:


      If you have a question please provide outputs from DarwinDumper (formed from Trauma tool). Thanks Trauma!
      Continued by blackosx and STLVNUB.
      Post#2 CloverGrower - create Clover by yourself Post#3 Downloads Post#4 Installation of the bootloader Post#5 How to do UEFI boot Post#6 How to use - common words Post#7 Calculator for Automatic DSDT fix Post#8 Instructions for GraphicsInjector Post#9 ATIConnector patching Post#10 Any kexts patching with some Samples Post#11 CustomEDID Post#12 Hiding unnecessary menu entries Post#13 Instruction for DSDT corrections to do DeviceInjection works Post#14 Development Post#15 Themes Post#16 About kexts injection Post#17 Instructions for P- and C-states generator Post#18 Patching DSDT to get Sleep working Post#19 CPU settings and geekbench Post#20 ACPI tables loading Post#21 DSDTmini Post#22 Custom SMBios Post#23 F.A.Q. Post#24 iCloudFix Post#25 Using mouse. Post#26 How to make orange icons to be metallic Post#27 How to make software RAID (by Magnifico) Post#28 How to modify InstallESD.dmg (by shiecldk) Post#29 Config.plist settings Post#30 Using extra kexts and skipping kernelcache Post#31 Choosing EFI drivers Post#32 Configuration files Post#33 Automatic config.plist creating Post#34 Custom DSDT patches Post#35 How to do sleep/wake working with UEFI BOOT Post#36 DeviceID substitution (FakeID) Post#37 Using Custom OS Icons Post#38 Hibernation Post#39 Floating regions Post#41 Property List Editor Post#42 Blocking Bad Kext Post#43 AAPL,slot-name Post#44 FakeCPUID for unsupported CPU Post#45 Multiple Boot Options - to write into UEFI BIOS boot menu Post#46 How to install Windows UEFI Post#47 How to speedup Clover boot Post#48 Info.plist patching Post#49 Arbitrary device injection Post#50 Non-Standard Legacy Boot Files Post#51 Reboot to Windows UEFI from Mac OSX Post#52 Deprecated Features Post#53 Using UDK2018 Post#54 Device Properties -----------------
       
      Slice:
      I edited all posts in the thread to correspond to actual Clover revision.
      Please install Clover at least 2652 and use new instructions.
×