Jump to content
InsanelyMac Forum
Sign in to follow this  
vodoo88

Stuck at root DEVICE UUID IS

Recommended Posts

Im using clover

 

and my spec is 

 

i5 4670

GA H87-D3H

8GB RAM

128GB SSD

no GPU

 

hBFVJZp.jpg

 

did I did anything wrong??

 

already google the problem but can't find it

 

Share this post


Link to post
Share on other sites
Advertisement

Hi

 

In case you have not managed to fix this. I just had the EXACT same thing happen to my wife's iMac overnight. And I meant exact! Won't boot to target mode, or most anything else. Verbose mode will work to give you the uuid message, CD install disk will kernel panic the machine.

 

In the process of fixing I re-learned a valuable tenet of debugging....start with the easier to check things first!

 

In short, I finally tracked it down to being one of the 4 8G Kingston sticks in the machine. But in the meantime, I had tried everything, including dismantling the machine to check both the SSD I installed 12 months ago and the 2.0TB HD; thinking that perhaps one of those had locked up the SATA bus completely.

 

So in short, check you RAM by removing it ALL, then put one stick in at a time! In my case, it was evident immediately as the first stick I put in started booting the machine fine.

 

Good luck and let us know if you fixed it and if it was the same issue!

 

Tracker_oz

Share this post


Link to post
Share on other sites

Hi

 

In case you have not managed to fix this. I just had the EXACT same thing happen to my wife's iMac overnight. And I meant exact! Won't boot to target mode, or most anything else. Verbose mode will work to give you the uuid message, CD install disk will kernel panic the machine.

 

In the process of fixing I re-learned a valuable tenet of debugging....start with the easier to check things first!

 

In short, I finally tracked it down to being one of the 4 8G Kingston sticks in the machine. But in the meantime, I had tried everything, including dismantling the machine to check both the SSD I installed 12 months ago and the 2.0TB HD; thinking that perhaps one of those had locked up the SATA bus completely.

 

So in short, check you RAM by removing it ALL, then put one stick in at a time! In my case, it was evident immediately as the first stick I put in started booting the machine fine.

 

Good luck and let us know if you fixed it and if it was the same issue!

 

Tracker_oz

 

 

already success install 10.8.4 using myhack

Share this post


Link to post
Share on other sites

Hi Voodoo88, I have exactly the same issue, and stuck for a while, not sure how you created your installation image, if you restored from orignial InstallESD.dmg in available OS X to U disk, you may encouter this issue. I created my U disk with myHack, it worked and installed successfully.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.



×