So, I am officially crazy...
I bought 26 Powermacs (G5)
And I modded them ALL
They are now ready for ATX and mATX Mainboards…
But why 26?
Did I mention I was crazy?!
(And they were only sold together…)
I modded G5 Cases before – They kind of became my passion.
This time I wanted everything to be perfect:
- Keep as much of the original design as possible
- Cut as less as possible
- Since it is impossible to find a G5 Case without dents and scratches, I wanted to paint them, freshly.
I am done now and it is time to share my experiences:
It was a rough 6 months from start to finish.
The project kept me busy during all of the winter.
I worked every weekend on it, till late.
I need to apologize…
…to my family for occupying their workshop, guest rooms and garages
…to my friends for neglecting them during the last months
…to the dogs and the cat for waking them up from their afternoon nap every now and then (because of the metalwork-noise).
I hope to be able and show everybody that it was worth it - And that someone out there is appreciating the work, as well.
Back me up, guys - Spread the love :-)
I believe in Apples high quality and the unique design of Sir Jony Ive
My mods include a preinstalled power supply (and even watercooling on some)
Countless hours of work and high-quality components & tools were used
Of course, you can come and have a look if you are near the South of Germany (or the North of Switzerland).
I do not have the money to equip all cases with CPU, RAM and SSDs right now.
But it would be so much fun to do it, now that all the hard work is done.
I will definitively equip machines later and build completely custom machines
I already equipped two of the shown modded cases with complete hardware.
One was for a music-studio. One for my brother.
Threads for the finished build projects will be linked here later:
Workstation & Gaming-Beast for my brother:
- ATX- X99-Mainbaord
- 8-Core Intel XEON E5-1660 v3 (Overclocked to 4 GHz - all-core)
- 64GB ECC-RAM (Registered DIMMs) with dual Copper heatsinks & Heatpipes
- 3x1TB SSD RAID5
- Two 1080Ti in SLI (two flexible SLI Bridges were later installed)
Ryzentosh (For music production studio):
o mATX Mainboard
o Ryzen 1700X
o biggest cooler on the market (BeQuiet! Dark Rock Pro)
o 32GB RAM (ECC Unregistered DIMMs) with Aluminium heatsinks
o 3x1TB SSD RAID5
A finished (painted) case from the outside.
The Apple logo is gone after painting…
For the better, I think!
The rear of a finished build
All the planning that goes into modding one case actually affected 26 cases. It had to be perfect. That’s why I planned every step and every purchase of parts, meticulously.
Then I applied every individual operation to all cases, one after another.
This raised the quality of all cases.
The metalwork (Filing, sanding, equalizing, gluing and painting) took a very long time. I don’t even know how many hours it took per case because I always did one individual operation to all cases (e.g. filing or cutting) and then started the next task. It probably took a couple of days per G5.
Then I broke my shoulder in May 2017 (doing something stupid on an Austrian glacier). That made it harder to do the sanding for a couple of weeks.
But even though it was painful, I couldn’t stop...
The different case-types:
The painting turned out very well.
I chose the best 14 cases after painting and decided to finish modding them, completely.
I will call these “Barebones” in the following.
In the pyramid-pictures they are always on top, because they were finished last and taken to the workshop more often.
The 14 best cases got equipped with a 600W PSU, front-panel, water-cooling (for the mATX Barebones), apple power-cables, etc…
They are now proper Barebones. No more hard work needed to finish the build.
Just missing a motherboard (and maybe hard drives) - and done.
12 other cases did not end up perfectly painted, but still good. Some orange peel here and there. Only 4 of them have stronger orange peel. I will call these 12 cases “Empty Ones” in the following.
An “empty case”
What to do with the “Empty Ones”?
They are also clean and modded. Ready for ATX or mATX boards, empty PSU-Enclosure…
One could make furniture or art out of them…
One could finish the mod with a new front panel.
Or one could paint them again in a different colour…
I don’t know…
Let’s start from the beginning:
Delivery: first we sorted the cases from “good condition” to “scratched and scuffed”
This sorting turned out to be useless, later as I ended up sanding, filling and painting all of them. I chose the best ones in the end.
We disassembled everything and sorted the parts – plastics, aluminium, batteries, electronics, etc… then gave everything to recycling. I am an environmental engineer, so this was important to me. I gave away all parts that could possibly be reused - Like fans, RAM and graphics cards.
There are no pictures of the disassembly, because it has been done by many people already and we were also too busy (it took a couple of days).
We ended up making our own tools and screwdrivers for removing the processors and mainboards, because many screws are hard to reach.
All parts that I wanted to keep were cleaned and kept separately. E.g. the fan grilles on the back, the rubber screws for the HDD Caddy or the DVD-drive stand-offs
Planning & Conversion
Then I made a plan for the easiest ATX conversion with the least cutting.
Best thing to do: Cut an opening to the back - big enough for ATX boards I/O and reuse the original PCIe slots for graphics cards. This turned out to be just perfect. I tested different boards. E.g.: ASUS TUF X99 (ATX) and ASrock AB350M (mATX)
Night shift – working with the Dremel
First cut for the ATX Mainboard I/O.
All the Internals are removed. Also, the fan grille with its many mini-screws. So that the plastic is not melting.
Cut-out (before filing and sanding). Sharp edges. Straight cut of the long sides thanks to the big angle grinder. Shorter sides were done with the Dremel for precision towards the edges.
Then the filing and sanding removed all sharp edges.
I removed all the Motherboard standoffs from the inside, cleaned the surface with Isopropyl alcohol and glued the standoffs in the new places for ATX Boards using the 2K Aluminium Epoxy. This took a lot of measure to fit a mainboard in the right position for the PCIe-Slots. I bought test-boards that were placed in the empty case with a graphics card plugged in and then the screwholes werde marked on the stencils.
I made two different stencils. One for ATX Boards and one for mATX Boards:
Putting the standoff through the stencil and securing it with a screw
Cleaning the surface before gluing.
Both stencils with standoffs and fresh glue – right before placing it in the cases
ATX stencil in the case – gluing down the standoffs.
mATX stencil while gluing. It had to sit like this over night to make sure the glue is hard.
Then, the stencil was taken out. There is no tray necessary under the mainboard. All stand-offs / threads are in the right position for standart mainboards, now.
Now that all the disassembly, cutting and gluing was done it was time for some fresh paint.
Before painting it was necessary to fill dents, file edges (there were chips, especially on the feet) and sand EVERYTHING to smoothen the surface and remove unwanted oils.
Fill, file, sand, repeat…
I used 2K Aluminium epoxy to fill dents
The Epoxy is like a cold weld. Hard and sturdy.
Dents before filling
Dents after filling - before sanding
Filled and sanded case.
At first I did not want to paint them myself.
So I bought the right 2K-Aluminium-paint (had to try different ones to find the perfect colour and shade) and handed four cases with the paint over to a professional paint shop (arm-industry - specialized on parts for tanks).
They were happy to try this because they wanted to train their varnisher-apprentices on something that is more difficult than the usual tank-parts.
The results were good, but It turned out that these cases are really hard to paint…
I was not 100% happy with the result. They returned from the paint-shop with some varnish-runs on the bottom of the cases. They also missed some spots that were hard to reach.
So, I changed my mind and decided to paint all the cases, myself (again...)
What a fool I was.
This took a week.
First of all, I needed a cleanroom.
So, I converted a shed in my parents’ garden.
Shed / Cleanroom – Winter-time
Thanks to my brothers’ help, the setup turned out really clean and airtight. Crucial for keeping it warm.
To keep the shed warm, I used a big oven and additional electric heaters. My father even set up a big chimney, so that the smoke was led further away from the shed (as smoke=small particles that would leave marks on the fresh paint).
I had a compressor on hand (with 30m hose) and used a spray-gun for coating the cases with Aluminium-paint. We used the spray-gun for car parts before.
Paint-Shed from the inside
Hanging case before spray-painting
Usually two or three cases were sprayed at a time.
All cases were sprayed at least two times with thin coats.
After spray-painting it was time for drying
The freshly sprayed cases were put in a sauna at roughly 80 degrees Celsius. That sped up the hardening and caked the varnish in.
The fully varnished cases after drying. This is the result:
The cases with the white bar on the back have the original Apple 2x2 Wifi / Bluetooth antennas in them (with two plugs) I installed a second 2x2 Antenna. Now they are 4x4.
The (IPEX? MHF?) connectors are bigger than those I have seen before. They don’t fit the tiny connectors on laptop-wifi-cards.
Maybe someone used the Apple Antennas with a PCIe Wifi-card before and can give me a tip or even post a link?
The “Empty Ones”:
This is what the 12 empty cases look like, that have some orange-peel skin:
Basicaly the underside of ALL cases looks like this - because they were placed on their feet for drying or Spraying. You will never see this when the case is standing on its feet.
An “empty-one” - ready for ATX boards.
Empty PSU-Enclosure is installed. Fan-bracket is in place. Sometimes still with apple fans.
A finished ”empty” mATX case
You can see some orange-peel skin or varnish-runs on the “Empty Ones”
I modded the 12 best-painted cases to create fully-modded Barebones:
Time for re-assembly:
The Apple-fans were removed from the fan bracket. They were loud and needed re-wiring anyways. It is recommended to put more modern fans in there. I renewed the rubber-fixings where necessary. You do not need screws to put fans in. They are held in and decoupled by the rubber. Vibration is not passed on to the case.
I put the PCIe slot brackets back in (they were also painted, of course) using the rubber-headed HDD screws from other cases. In case you want to add more HDDs you have the right screws at hand.
The fan-bracket fits in its original position. That works fine for most Mainboards. If you have a Mainboard with very high VRM heatsinks or high I/O (e.g. with 6 stacked USB-Ports) you can either remove the fan bracket completely (I did that for my brothers build and just clamped some BeQuiet! Silent-Wings 2 - 92mm in) or move the bracket up a bit - by not inserting the hooks under the lip, but rather clamping the bracket above the lip (I did that for the Ryzentosh, it is also very stable).
The bracket holds two 92mm x 25mm Fans
My favourite: Noctua NF-B9 redux-1600 PWM - 92mm
They look like the original ones and are very quiet. (I used them in two projects)
Cheaper Arctic PWM Fans for testing
The Power-Buttons needed to be painted, as well. Over time they lost some of their thin chrome coating due to touching. The 2-K varnish is thicker and will be much more durable.
Secured the power-buttons down using double-sided tape during varnishing
To make them fit perfectly again, I needed to scrape of excess paint from the sides. The buttons would easily get stuck otherwise.
The case without any front-panel board or power-button.
Half of the G5s I bought were “late 2005” models. The front-panel-boards of all G5s have the same size and fit in all the cases.
Only models before “late 2005” have a front panel connector-socket. So, I had 14 front-panels that could be used with BlackCH-Mods-cables, and 14 perfectly painted cases. That’s a match.
Re-installing the power-button board with its securing ring. This took a long time because every button had to be re-adjusted to work nicely again.
Also notice the rubber piece on the right-hand side. This is needed to support the front-panel board when plugging in the cable to the connector:
Installation of the front-panel board.
The housing of the front-panel board has also been painted.
The custom-made front-panel cable by BlackCH Mods. They were not cheap but they work.
I marked all the connectors on one of the cables to make them easier to identify.
Audio works perfectly even though there is a proprietary sensing pin on apples board. I recommend to set the front-panel type to “AC’97” in the BIOS / UEFI instead of the default “HD Audio”. That way the front panel audio is basically ON all the time and you can choose other outputs from the task-bar. I used Realtek drivers for Windows in my last two builds. For a Hackintosh you would need to follow BlackCH Mods manual or ask the community about the best settings.
Plugging in the mod-cable to the front-panel connector.
Securing the plug with the black cap. It is pushed down even further than shown in the picture – so it clipped on to the board itself to give the connector more pressure and therefore stability.
DVD / Blu-Ray drive:
Eject the disc tray with a paper clip.
Unclip the front-plate, so it does not get stuck in the auto-opening Apple-aperture
Screw in the stand-off screws (I saved those)
Finally, slide the drive into the mounting-bracket and close the two little retention arms. Done.
PSU (Power Supply Unit):
I thought a long time about the perfect PSU.
I really wanted to re-use the original PSU-housing, because of the clever placement in the case. It sits flush with the mainboard at the bottom and the original power- socket is a MUST to reuse for aesthetics and stability.
The original Apple power-plug with Apple power-cable.
How do you get a new PSU into the original Apple PSU?
I did not want to crack open a standart ATX PSU and jerry-rig its sensible (and dangerous) electronics into the original PSU-housing.
So, I looked for a server-PSU that would fit inside the original housing completely with own housing and fan. Safe and sound.
Not an easy task setting those up, because server PSUs often have proprietary connectors.
Also, I wanted 600 Watts of output power to drive any overclocked CPU with a powerful graphics card like the GTX 1080Ti.
Soldering on the new -internal- power-cable to the original power-socket in the Apple PSU housing.
Shrink-tube protects the soldered joints.
The cable will be connected to the new PSU inside. As an extension.
The input-filter is still connected to the socket.
The Apple power-cord.
I found the perfect PSU.
A 600W PSU by Supermicro.
Supermicro is a very known brand in the professional server market. So, I can trust those PSUs to constantly deliver real 600Watts. They are designed to run under full load for years. Hence, they can be really expensive.
Many cheap PSUs just claim to be 600W but struggle to hold that power up for longer periods of time (or they degrade). This will not happen with a Supermicro PSU.
The 600W PSU comes with a 80+ Platinum rating.
That is one of the highest Energy efficiency ratings available.
Higher than 80+ Gold, Silver or Bronze (which is kind of the standard right now)
80+ Platinum means 92-94% of the Input-power is delivered as output. Only 6-8% is transformed into heat. That was important to me in order to keep the PSU quiet.
All PSUs before they were put in
It has the 1U form factor. So, you could actually fit two of them in the housing.
The 600W PSU plugged into the extension cord.
Securing the PSU in place
The 2005 Powermac Models have a bigger server power-plug (C19) suitable for higher power delivery of over 1000 Watts.
Almost half of the cases have this kind of plug.
They also have a bigger input filter.
Soldering the extension on.
Finished housing with server power jack (C19) on the outside and standart plug (C13) on the inside
PSU inside the original Apple-Housing
All the cables come out near the back of the case.
I created bigger openings for the cables to feed through.
All PSUs are prepared
The PSUs and their connectors have been tested with a PSU-tester.
These Server PSUs still have some proprietary connectors (and some cables, that are a bit shorter than usual), So, I bought different adapter-cables and extensions for the PSUs to make everything universal.
- PCIe 8-Pin (2x) for graphics cards (over CPU 8-Pin adapter)
- CPU (1x 8-Pin, 1x 4-Pin) – actually there is one more 8-Pin, but it is occupied by the PCIe-adapter. So, it is possible to do a dual-CPU setup with a small graphics-card, that does not need a dedicated power plug, as well.
- Molex (2x) (6x over SATA-Adapter)
- SATA (5x) (over Molex adapter), black sleeved
- 24-Pin ATX (20 Pin is possible) + Extension (black) + Dual PSU connector
- 12V Fan (4x over Molex Adapter), black sleeved
Different types of cables and adapters (in an mATX Case)
You can hide most cables behind the PSU-housing and under the mainboard, as the standoffs that hold the mainboard are quite high. That is the biggest benefit over using one of those tray-adapter-plates that would use up the space behind the mainboard.
The cables in an ATX Case (not hidden / cable-managed)
The original Apple 2-Bay HDD-caddy was glued into its new place to be out of the way. Only necessary in the ATX-Cases to fit the bigger ATX Boards in. Using high-temperature silicone.
Molex Power provided by adapter (if needed for 3,5” drives, most new 5400 rpm HDDs don’t even need Molex anymore)
ATX Case with a bit of cable management and the HDD-caddy in place
Finished ATX Barebones:
Finished ATX case with all equipment and the server power-cord
Finished ATX case with the Acrylic cover
Different finished ATX Case with cover and cable management
Watercooling (mATX Barebones):
Now that the “Empty Ones” and the ATX Barebones were finished It was time to mod the mATX Cases.
I added watercooling to the mATX-Barebones:
Best place for the radiator is the front. Here it will blow the hot air directly out of the case.
This is the 240mm radiator for the watercooling of all mATX cases
To decouple the vibration of the loop from the case I used a foam seal on the front of the radiator and a thick silicone-seal on the sides and the top
Gluing the radiator in with special high-temperature silicone. (This Silicone is usually used to attach the IHS to a CPU or to seal an exhaust pipe) – good for temperatures up to 329°C
Radiator in Place. Thick silicone seal is decoupling the vibration of the water-pump that travels through the loop.
The 240mm radiator fits right in between the PSU and the top-compartment.
The mounting kits for this Cooler Master AiO support all modern processors and sockets (775, 1150, 1151, 1155, 1156, 1366, 2011, 2011-3, 2066, AM2, AM2+, AM3, AM3+, AM4, FM1, FM2, FM2+)
Two 120mm high static pressure fans come with the watercooling loop. They blow out.
You could of course turn the fans around to suck air in (positive pressure).
I saved the important bits and bought cables for all Barebones
Every fully modded Barebone has its own new power-cable (half of them white apple cables, half of them black OEM server cables)
All fully modded Barebones have the acrylic cover
I kept HDD rubber-head screws, DVD-drive standoffs, Pump Mounting Kits in a little bag.
Finished mATX Barebones with watercooling:
Here are some pictures of the internal layout:
Pictures of the outside can be seen in previous posts.
Finished mATX Barebone
Finished mATX Barebone with all equipment
Finished mATX Barebone with all equipment
Types of cases & Barebones:
What I have right now:
12 fully modded Barebones:
6 - mATX - with watercooling
6 - ATX - (eATX boards should also fit)
12 “Empty Ones”
- 8 prepared for ATX (3 of which have heavier orange-peel)
- 3 prepared for mATX (1 of which has heavier orange-peel)
Thats it for now…
What do you think?
Was it worth it?
What hardware would you put in?
Please let me know…
This driver is a mod of the popular kx audio driver for mac os x, the project goal is to still maintaining it for the future releases of mac os and to include as much cards as possible and to get all the features of the cards to work.
Currently the only features not supported are audio inputs and integrated midi and synth capabilitues of the cards, and some minor things like creative remote controllers or software controlled volume gears on creative external drives and bays)
It supports most the sound blaster live! series cards, the sound blaster PCI 512, most of the audigy (emu 10k2 based) series, audigy 1, audigy 2, audigy 2 zs, audigy 4 (SB0610), audigy 4 pro, audigy 5 and audigy rx (sb1550) and some e-mu edsp audio cards with all the recent versions of mac os, tested to work with mac os yosemite, el capitan, sierra and high sierra on intel based machines from socket 775 to 1151 (including enthusiast platforms like x58, x79, x99, x299) and also confirmed to work on mac pros.
Kx audio driver mod [sound blaster live!, audigy 1/2/4/RX emu edsp]
working on my second Hackintosh project, and just finished the paintjob and visual side of it.
Not sure what to call it: I was inspired by sci-fi movies (Aliens (1986) in particular as the attentive reader might notice).
Perhaps simply "BauerCorp Mod" or similar.
Anywho, this is the build so far: (Software setup still remains)
• Primary use: Creative work, video editing
• Corsair C70 case
• Inno3D iChill GTX 1080 TI
• ASUS Maximus X Hero 370 (Wi-fi, Bluetooth)
• i7 8700K
• 32 GB HyperX RAM
• Samsung 500GB 850 EVO M.2 SSD
• (7 SSD drives total > Will be transferred from current machine when everything else is ready. Same with lighting.)
• PSU: Corsair RM750X
• CPU fan: Noctua NH-D15
Let me know what you think, and if you´re interested I´ll post more about the build/painting process itself.
Here is my build in its current form. I absolutely love this project as it has grown! All hackintosh install instructions were found at Ryzen Clover Installation Guide macOS Sierra - AMD - InsanelyMac Forum
First thing to know is that two of these systems were built at the same time. One for my buddy to use for his YouTube channel (See the video here for the twin system https://youtu.be/rRW4c1FnRrE), and mine. He called me up with an idea, to build a water-cooled Ryzen hackintosh inside of an old PowerMac G5 case, and as soon as he said the idea I was hooked. I have always loved the PowerMac G5 because when it came out, I liked to edit photos and it was what I thought at the time was "The Ultimate Machine". So here are some pictures of how it came about.
I picked up two PowerMac G5s (both working mind you) in case I messed anything up on the first one. I did not so now I still have a working PowerMac G5. Lol.
Starting off we have disassembly. Note that I don't have a lot of pictures of this progress as I have impulse control issues and wanted it apart ASAP. lol. This is a challenging computer to take apart but well worth doing as this case is amazing! The case I had was pretty beat up with scratches and stuff so I had to do a lot of sanding to get them out.
After disassembly, I took to a small test fit by placing an old mother board in the case to figure out where to cut out for IO in the rear of the case. A quick sharpie line and some dremel time were in order after that.
Following the IO I cut out the side panel for my piece of acrylic. Using the existing frame that holds on the door of the case, I marked 1/2" in from the inside edge of it and drilled holes in all the corners so they would be rounded. (remember that at this point you want to drill your holes with a 1/2" drill bit and make it so the outside of the bit matches up with your lines.) Then cut the acrylic sheet to fit the inside of the frame (not your cutout).
From there you need to use a jigsaw to cut along your lines and connect your 4 holes that you drilled.
Then on to paint. I sanded all the pieces with an orbital sander then used a can of primer and did 3 coats of primer on them all. Followed up with a few coats of black. I added a coat of clear to just try to keep it a little more durable but I should have just done more coats of black. To finish off the case, run some edge moulding around the side panel cut out and attach your acrylic sheet to the side panel with double sided tape. Re install your side panel frame and you are good to go!
To mount the motherboard, I used the existing standoffs from the PowerMac G5 case (be careful here as there are two different heights of standoffs). Add in some JB weld on the base of them and a small coat around the outside of them it was ready to go. I used a GPU to line up where it goes in the case.
Now for the final assembly. I test fit a bunch of different hardware placements but what I ended up settling on was the PSU at the bottom mounted with double sided foam tape. All of the cables were then run up the front side of the case along the motherboard mounting tray and grouped together using zip ties. It is also important to know at this point I bought a cable from Black CH mods to use the existing IO on the front of the case with an ATX motherboard. Radiator at the front with pump/res combo unit mounted to it using the EK uni bracket. I secured the radiator to the front with car grade double sided emblem tape. If you have ever used this stuff you know it is not going anywhere. I reused the existing hard drive cage from the case and secured it to the top also using emblem tape.
One of the most important steps in this process is the running of tubes (since it is watercooled and all). There are only 4 tubes in this build thanks to the plethora of fittings I have in the case. I don't know if I listed them all but any time you do a hardline watercooled build it is important to have a handful of rotary 90s and dual rotary 90s on hand. I tried to do it without them in my last version of this build using the NZXT H440 and couldn't get my tubing runs to look like I wanted.
Fill up the system, leak check, then hook up the power and you are good to go. I added in a RGB light strip and hooked it up to the ASUS aura sync header for a little bit more color. This process was a long time coming and took almost a month from idea phase to final assembly.
I spent a long time without a working home PC but man was it worth it! Thanks for reading!
Hello guys, I just got a Power Mac G5 complete desktop and I would love to tear it down and install all new hardware and make the best hackintosh I could possibly create.
I removed all the components and decided to keep the drive bay, bluetooth and wifi wires (maybe I'll toss them) and screws (why not!?)
The only thing this case is missing is the side panel, its gone and was gone from when I found it, as well as the G5 heat sink cover (damnit!)
Does anyone know where I could get a replacement cover or would I have to design and fabricate a cover from scratch? Any help is appreciated of course and I had no idea where to post this question considering all the main forums didn't quiet fit so I apologize in advanced.