Salve, vorrei fare un Hackintosh come da titolo, solo che avendo poco budget volevo chiedere se la mia attuale postazione fosse buona e ci fossero componenti compatibili per mac:
amd r9 280x
ram 2x4 1600
Se non erro però la gru non dovrebbe esserlo dato che è amd. Grazie in anticipo
I have a Kingston HyperX Predator PCIE-SSD (model: SHPM2280P2H) matched with an X58 motherboard (legacy bios). The card has a Marvell 88SS9293 controller with an Option ROM which allows it to be detected on my motherboard as a bootable drive - listed as "IDE: Kingston SHPM". As my BIOS is non-UEFI, I assume the Option ROM presents it in IDE mode instead of AHCI.
I use Clover legacy with BiosBlockIO to get around this, and it works well - Clover detects my drive and allows me to install macOS onto it and use it as a boot drive. macOS detects the drive correctly as a SATA AHCI drive. I guess Clover correctly detects (configures?) the Option ROM into AHCI mode and presents it as such to macOS - getting full speed read Read/Write performance. All is well.
Except waking from sleep. When waking from sleep, depending on clover config options + dsdt, I either get an immediate reboot or hang on black screen that requires hard reset. I eventually realised that nothing after entering sleep mode is recorded in the logs, its completely empty until next boot up. This makes me think that on resume from sleep, macOS isn't seeing the drive anymore (hence can't even write to logs). My assumption here is that the Option ROM is presenting/configuring the card in IDE mode, which is not what macOS is expecting.
This post describes the problem:
and also has a solution: in dsdt, simply write the correct values to 0x40, 0x41, 0x42 (which must be the BAR0 register?) to configure Option ROM to use AHCI mode. But I have no idea what address BAR0 is on the Marvell 88SS9293 - there appears to be no documentation whatsoever on this controller available online!
I managed to dump the ROM using Linux sysfs, but don't have the skills to disassemble/decipher the binary to find the correct addresses. Anyone with such experience able to help?? I've attached the ROM dump and lspci output.
can somebody walkthrough with the mojave installation guide?
i have a mac high sierra 13.6 version on my macbook pro and want to install mojave on my desktop
Exact config is Gigabyte gaming wifi 7 motherboard amy ryzen 7 2nd gen 2700X processor Gigabyte G1 8GB grapgic card VEGA 64
running 2 nvme Samsung 256gb cards and 1 intel 180gb ssd internal and 1tb WD HDD, with 64 GB 3200Mhz Ram
Hi guys, this thread is to show you a new and open source app, created by me, that I called TINU:
The name means: TINU Is Not #####, the U refers to a popular software that is used to create macOS hackintosh installers (that for good reasons is banned on this forum), but the aim of the name is to explain that this app is a totally different thing from that software and works in a totally different way.
This app basically is a graphical interface for the createinstallmedia executable that is inside the macOS and Mac OS X installer apps, it is capable to create a bootable installer completely vanilla like what you do using the command line method, and also this method is recommended by apple itself. In addition to this, this app provvides to you simplicity and flexybility, and lets you to avoid most of the steps needed with every other app.
TINU allows you to create easily a bootable macOS installer without messing around with command line stuff and without using disk utility, all you need to do is use the app and then install clover on the usb drive once TINU has finished or leave it as is if you want to use it on a real Mac.
- Simple-to-use UI that allows you to easily start the bootable macOS installer creation process.
- It can work with every macOS installer app that has the createinstallmedia executable inside its resources folder (including also beta and newly released installers).
- You can use any erasable volume that is at least 7 GB of size (if the volume's drive is not in GUID format, TINU will re-format it accordingly).
- Can work with the Mac OS recovery system, so you can create a bootable macOS installer from the macOS installer itself or from the macOS recovery partition, and you can use TINU to install macOS, too.
- 100% clean: The bootable macOS installers created with this tool are vanilla, just as if you created them using the command line "createinstallmedia" method in Terminal.
- Open Source: You can verify what this program does on your computer and you can create your own version by downloading and playing with the source code.
- Does not require any special preparations. Just open the program, make sure you have a USB drive plugged in and have a macOS installer app on your disk.
- No need to use Disk Utility. TINU can format your drive or partition for you.
- Integrated EFI partition mounter tool.
- Uses recent, modern, APIs and SDKs and the Swift 3 language.
- Transparent graphics style available (type alt-S or choose from the menu bar: View -> Use transparent style).
- Works using the latest versions of macOS and will also support newer Mac installers out of the box without requiring an update.
- Offers advanced features to customize your bootable macOS installer.
Features that are planned for future versions:
- Install and configure [Clover](https://sourceforge.net/projects/cloverefiboot/).
- Install kexts into Clover's kexts folder.
- Clover drivers customization
- Use custom DSDT in Clover
- Integrated pre-made Clover config templates database from a remote and open repository.
- Support for other languages, at least Italian.
- A computer that runs Mac OS X Yosemite or a more recent version (Mac OS X El Capitan is required to use TINU in a macOS recovery or installer).
- A drive or a free partition (on a drive which already supports GUID) of least 7 GB that you want to turn into a macOS/Mac OS X installer.
- A copy of a macOS/Mac OS X installer app (Maveriks or newer versions are supported) in the /Applications folder or in the root of any storage drive on your machine (excepted the drive or volume you want to turn into your macOS install media).
Thread (english) on insanelymac.com:
Thread (italian) on insanelymac.com:
Thread (english-german) on hackintosh-forum.de:
Post on Reddit:
Facebook hackintosh help and beta testing (Italian only):
Contact me (project creator):
- Insanelymac.com profile: http://www.insanelymac.com/forum/user/1390153-itztravelintime/
- email: email@example.com
- This software is under GNU GPL v3 license so any new branch/mod/third party release must be open source and under the same license
- I (project creator) assume no responsibility for any use of this app and this source code, and also for any kind of hardware and software damage to any computer and any device or peripheral that may come from this app or source code during it's use and outside it's usage
- I (project creator) do not guarantee support to you, this is only an open source project, not a product released by a company!
- This project is born only for educational and demonstrative purposes, it's not intended to be used for commercial purposes and it will never be, don't use source code from this project to create apps or software for that aim.
- This is a no-profit project, born only to let people to create macOS install medias in a more simple way and also to learn how to create this kind of apps.
- Apple for macos and installer apps and scripts
- People that helped me a lot:
Francesco Perchiazzi, Nicola Tomarelli, Roberto Sciortino, Raffaele Sonnessa, Ermanno Nicoletti, Tommaso Dimatore, Michele Vitiello Bonaventura, Massimiliano Faralli, Davide Dessì, Giorgio Dall'Aglio, Peter Paul Chato.
- Special thanks to Italian Hackintosh group!! for help (https://www.facebook.com/groups/Italia.hackintosh/?fref=ts)
- Thomas Tempelmann for help with the UI
- Pietro Caruso (ITzTravelInTime) for creating, maintaing and developing this project