Jump to content
tushar.gandhe2209

What do i need to make this build work?

3 posts in this topic

Recommended Posts

I am all tired and frustrated trying to install mountain lion 10.8.3 (mac app store app) on this build

 

CPU - corei3 530 @2.99ghz

MOBO-intel DH55TC

GFX-Sapphire HD7770 ghz edition

8 GB ram @1333mhz

2.75tb HDD space spanning 4 hdds.

 

Ive had no luck trying different build/install guides that i googled and also the tools available at "other" forums.

 

The problem is that the installation just wont start..keeps still at "DSMOS has arrived"

ive tried various boot flags on chameleon but to no avail. What the hell am i missing?

 

HELP!! :(

 

is a hackintosh at all possible with the above specs??

 

thanks is advance. :)

 

 

P.S - I do have a working hackintosh laptop made out of a Dell Inspiron1525 thats running 10.6.8 pretty smoothly(used nozyczek's amazing guide)

 

P.P.S - i am still a bit of an noob with all the dsdt's and kext stuff...!!

 

:D

Share this post


Link to post
Share on other sites
Advertisement

hello

 

probably reading, googling and persistency..

 

all u problems are in the ati card

 

     AMD 7970 Working With Full QE !    

 

and remember hack mac os x is 99% of reading , googling , persistency to find solutions and 1% of luck u hardware be compatible

 

good hack

Share this post


Link to post
Share on other sites

 

all u problems are in the ati card

 

so..is all the other hardware fine?? sorry for being such a noob...

i know the intel mobo is good...but cannot find much resources if the cpu is compatible or not!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By steamteam
      Hey everyone,
       
      after years I come back to Hackintosh. In the early days I played with ozmosis and my good old 4700k. Now I'm back and worked around a 100% working setup with enough power to get me through all my tasks like audio, video cut etc.
       
      In this short tutorial I will guide you through BIOS Settings and give you access to my EFI Folder. This I do because I haven't found anything on the web for my setup. Maybe it will help some of you. When you follow the steps you will have a perfect running Hackintosh  like I do have now  
       
      I've chosen the iMac 18,3 because of the easy integration of both Graphic Units and the support of HEVC. 
       
      Specs:
       
      CPU: Intel i7 9700k (Overclocked in Bios to 4,7 GHz)
      SMBIOS: iMac18,3 (Because of Dedicated Graphics and HEVC Intel Support)
      RAM: 32GB G.Skill Trident Z RGB DDR4-3200 DIMM CL16 (XMP Profile to 3200MHz)
      Motherboard: MSI MPG Z390 GAMING PRO CARBON (MS-7b17) <- It's the model without WLAN/Bluetooth
      Graphic Card: Sapphire RX580 Nitro+
      Bluetooth & WLAN: Broadcom Card in PCI Adapter
       
      What is working: 
       
      Almost everything! All USB Ports, Intel Power Management, Bluetooth, WLAN, LAN, Intel Graphics HEVC, Boot/Reboot, Sleep
       
      What is not working: 
       
      Facetime & iMessage (Don't need it but I will come back to this)
       
      Steps:
       
      1. Create Mojave 10.14.5 USB Drive | https://www.youtube.com/watch?v=9CZDXxKfodE&amp;t=95s | Us this tutorial or search the forum
      2. Load my EFI Folder: https://workupload.com/file/zkJ4zdQk
      3. Go into your bios and use my settings in the Screenshot I attached 
      4. Boot from USB Stick | Install Mojave | Boot into Mojave (Check other Tutorials if you don't know how)
      5. Generate Serials with Clover Configurator
      6. Happy Hackintosh Life! 
       
      Kext I use:
       
      AppleALC.kext | Needed for Sound
      BrcmFirmwareData.kext | Needed for my WLAN/Bluetooth Card 
      BrcmNonPatchRAM2.kext | Needed for my WLAN/Bluetooth Card 
      BrcmPatchRAM2.kext | Needed for my WLAN/Bluetooth Card 
      CodecCommander.kext | Fix Problems after Sleep
      CPUFriend.kext | Perfect Power Management for my CPU
      CPUFriendDataProvider.kext | Perfect Power Management for my CPU
      FakePCIID_Broadcom_WiFi.kext | Needed for my WLAN/Bluetooth Card 
      FakePCIID.kext | Needed for my WLAN/Bluetooth Card 
      FakeSMC.kext | Standard
      IntelMausiEthernet.kext | Ethernet
      Lilu.kext | Standard
      USBInjectAll.kext | To fix all USB Ports
      WhateverGreen.kext | Needed for graphics
       
       
      If you have success with my little tutorial and EFI Build let me know! Hope you reach the desktop and will be happy!
       






    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&amp;t=6771   Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell     Skylake, Kabylake and Coffeelake is here http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-gigabyte-mobos-serie-200-kabylake-dsdt/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        Mojave Full DSDT patch   http://olarila.com/forum/viewtopic.php?f=59&amp;t=6428   First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&amp;t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        First... If you need DSDT edits... -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation --Create a bootable copy of El Capitan /  Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder   https://olarila.com/files/Clover.Folder/CLOVER.LGA775.zip   --Install EL Capitan / Sierra / High Sierra and boot into system!     Post Installation   --Install Clover and replace with my folder   https://olarila.com/files/Clover.Folder/CLOVER.LGA775.zip     --Reboot and activate video!   Bingo! Now you need a fine tune! DSDT Time!   My DSDT GA P35-DS3   DSDT.MaLd0n.zip     Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DARWIN -LPC -HDEF -RTC -EHCI -UHCI -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -EC -PNLF --Native Power Management
       
      Use Clover, check Generate P and C States
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --AUDIO
       
      Device HDEF + AppleAlc + Lilu
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/293863-applehda-patch-requests/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By Theapc06
      Hi I Just Bought A Hp Elite 8300 I3 3200 Desktop Computer And I Was Wondering If The Intel HD Graphics Were Going To Be Supported When I iNSTALL Mojave Or High Sierra Thanks -ALEX
       
       
      PS: What Is The Better OS To Go For On This Desktop PC : MacOS High Sierra -10.13 Or MacOS Mojave -10.14
       
                                                   Thanks Again -Alex
       
    • By Exvar
      This is all I needed to build a fully working hackintosh in a REALLY vanilla way, no weird coding, almost everything worked out of the box immediately:
       
      Hardware:
      USB thumb drive (at least 8Gb)
      Motherboard Intel dh55tc
      CPU i7 860
      RAM 12 GB Patriot (2x4, 2x2)
      GPU XFX ATI5870
      SSD Kingston HyperX 120Gb
      HDD 2TB Seagate Barracuda
      Screens: 40" Sony 1080p TV, 24" 1080p BENQ LCD
      Optional WiFi TpLink TL-WN881ND PCI card (worked oob) 
      The Pluggable USB-BT4LE Bluetooth worked oob on El Capitan and Sierra as well
      External USB 2.2 Sabrent sound device. Voodoo sound sucks and I just couldn't get the Realtek ALC888S to work. Volume control works flawlessly
      Optional Microsoft Web USB HD Camera (works with Skype and FaceTime)
      Optional Wacom Pen Tablet (installed and works perfectly)
       
      Software:
      OS X Olarila Yosemite <-- Look for it in your fav torrents site
      OS X El Capitan (same as above)
      OS X Sierra (same as above)
      Install the AppleIntelE1000 v.3.3.3 for Intel 82578DC ethernet and Voodoo sound  (Use kextutility to install network kext) in case of trouble see below
       
      Clover
       
      Clover configurator 
      Use Transmac from Windows (free trial) to write the Olarila image onto the USB drive (bigger than 8 GB) or in your Mac do sudo dd if=[drag and drop the raw file in terminal] of=/dev/rdisk2 bs=1m Change BIOS settings to enable UEFI boot, enable AHCI Select boot from USB Go to BIOS settings in Clover booting menu and check USB ownership option Go back to main menu and boot from Yosemite USB installation Select language installation Go to Disktools and format your destination drive with the GUID partition option Exit Disktools, go to Olarila Clover install menu and select your new partition to install After about 12 minutes (on an SSD) your system should reboot without problems Boot again from your USB, check the USB ownership option again and boot now from your new Yosemite installation Install the kexts for the intel 1000Mb network card and Voodoo for your onboard sound card Install Clover on your Yosemite drive EFI partition and select only Bootloader - Install boot0st in MBR and CloverEFI 64 bits SATA Reboot (again using your Olarila USB) Launch terminal List your partitions, at this point the Olarila USB drive might be sitting on Disk0s1 (diskutil list) Clone your Olarila EFI partition into your current drive EFI partition, make sure you listed your partitions (sudo dd if=/dev/disk0s1 of=/dev/disk1s1) Remove the Olarila USB drive, your cloned EFI partition should now be ready to boot from Reboot again to verify that you successfully cloned the Olarila EFI partition into your drive EFI partition (again take USB ownership) Launch Clover configurator to mount your cloned EFI partition (mine now was Disk0s1) Edit your config.plist files in your SSD EFI partition to automatically add USB ownership and remove verbose (so your boot logo is an Apple instead of the verbose). Note. Use Clover configurator to obtain the XML lines required to add ownership, remove the verbose and assign a computed serial number, manufacture date (mid 2010) to your Hackintosh, make sure you add these new lines to all config.plist files inside your EFI partition (3 config.plist). Thats it, I ended up with a fully working hackintosh that successfully wakes up on sleep, boots without the USB, has fully accelerated video h.264 MKV and 3D (tested and played without any hiccup Tomb Raider, Metro 2033 and Bioshock Infinite from steam), about this Mac info says it is a mid 2010 i7 Mac, shows up on find my Iphone on iCloud.
       
      Update: Don't lock your Hackintosh from your find my iPhone app (except of course it got stolen), I did it and the unlock password never worked. Had to reinstall and retrieve valuable files from the locked older Yosemite installed SSD
       
      Update: I backed up with time machine my hackintosh and installed both the OS X Update Combined 10.10.2 and the Security Update 2015-002. It seems everything went just fine except for my WiFi that apparently needs a kext reinstall 
      Aug/11/2016 Update. After over a year and a half of developing on Xcode with Yosemite, I needed to upgrade to El Capitan and everything went really smooth. Just backed up everything with TimeMachine, installed El Capitan on the former Yosemite partition, and all programs and configurations came back just fine. All I needed to do was update Clover on my EFI partition. The computer was already fast enough, but now it feels somewhat even faster. February 2017, installed Sierra, real pain in the butt because I tried a gaming upgrade with a Radeon AMD HD7970 just to find out that it won't come back from sleep, that an iGPU is required and enabled on the BIOS, which my processor doesn't support, so I had to put back the HD 5870. With the TL-WN881ND PCI card, I had to get the Kext, put it in the EFI partition on Clover Other Kexts directory, and use Kext Utility to build the cache, or else the WiFi stopped working after the second reboot. The 82578DC network stopped working on the third reboot, so I got the IntelMausiEthernet v 2.2.0 Kext and put it in the other Kexts directory in Clover from the EFI partition, ran the Kext Utility repair permissions, because all other Kext install methods failed, including Kext Utility and Kext Wizard
       
      Update: I downloaded Olarila High Sierra installation RAW file, put it in an USB drive and choose to install High Sierra over a Yosemite MacOS. On an almost identical rig (DH55TC AMD 5870) I had no problems doing just that with all versions from El Capital up to Sierra, but this time it was different
       
      The system booted up successfully but didn't recognize two internal HD drives, so I was worried there was something with the ExFAT or worse yet, the drives failed on me. On a closer look I noticed the drives worked just fine within Windows and couldn't get the drives to work on High Sierra with the ExFAT fix. I also noticed that the Sleep and Wake Up process fails, the computer fails to wake up. Also noticed a message during the boot verbose: DISK2 IO error.
       
      So after doing some research, it seems Apple like updated their AppleAHCIPort.kext extension (329) so to provide a hot swappable function but excluded Intel 5 Series Chipset compatibility for a newer energy saving function. Long story short, with the attached files, I managed to correctly install a fixed AppleAHCIPort.kext extension with a Kext Installer, but I still have issues getting the computer to wake up from the sleep state.
       
      I hope to fix this annoying restriction. High Sierra is the last MacOS supported by this rig due to the Metal compatibility requirement in Mojave. (Maybe upgrading my VC do the trick?)
       
      PD I am also attaching my config.plist with the configuration for automatic drive selection.
       
      AppleAHCIPort.kext.zip
      config.plist
×