Jump to content
Sign in to follow this  
Followers 0
newfyworld

Instant Reboot - 10.7.3 Install DVD AMD

1 post in this topic

Recommended Posts

Hello world. :D

 

OK, so I have been trying to install 10.7.3 on my computer... But I can't get to the install, or GUI for that matter. Now, this is not my first time hackintoshing. I'm going to spare the long story, but... AMD hackintoshing is a 'process'. I've successfully installed Snow Leopard (10.6.2, took a few days), and haven't successfully installed Mountain Lion... So, I boot from the DVD, and it says something along the lines of "Press any key to boot, or F8 to define boot options"... Something like that. Anyway, I press F8, and type in: "Kernel Cache"=\amd arch=i386 -v  And it starts loading, and then reboots. It doesn't even reach the console. It just instantly reboots. If I don't type anything in, and press enter, it waits for about 2 seconds, the screen flashes white, and it reboots. I've tried removing the graphics card, removing ram, GraphicsEnabler=no, npci=2x000.... And my BIOS settings are as accurate as they get. I don't have the option to set the sleep state to S3, and no AHCI option. I have my SATA mode set as 'Native IDE Mode'... HPET is enabled. Any ideas? Thanks. Specs in sig.

Share this post


Link to post
Share on other sites
Advertisement

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By karthiksh1989
      can somebody walkthrough with the mojave installation guide?
      i have a mac high sierra 13.6 version on my macbook pro and want to install mojave on my desktop
      Exact config is Gigabyte gaming wifi 7 motherboard amy ryzen 7 2nd gen 2700X processor Gigabyte G1 8GB grapgic card VEGA 64
      running 2 nvme Samsung 256gb cards and 1 intel 180gb ssd internal and 1tb WD HDD, with 64 GB 3200Mhz Ram
       
      https://wa.me/919611736534 (whatsapp)
    • By ShiroOne
      Hi! Newbie here.
       
      Been browsing the forums for a while and trying to setup a Mojave 10.14.3 with the following hardware:
      Motherboard: ga-z370n-wifi - BIOS revision F5 CPU: Intel i7-8700k  RAM: G.Skillz Trident Z 32gb (2x 16gb) DDR4-3000 HDD: Samsung 860 Evo M.2 1 TB  PSU: Corsair RX750  
      USB used is 2.0
       
      I've run into an issue where I'm trying to load the installer, but I am getting a panic error before getting to the Grey install screen.
      Followed this guide:
       
      See attached Screenshot for kernel panic.
       
      If I need to provide more info, let me know and I'll do my best to provide the info
       
       
      Also i'm not sure how to get the panic logs since I don't get shell unless I boot into single-user mode. (That of which I noticed a panic error whenever I try to run diskutil from single user mode)

    • By Fede1132
      Hi guys i have a problem install macOs Mojave on my PC, I have this configuration:

      CPU: Ryzen 7 2700X;
      GPU1: GTX 970 Strix(For game rendering and 144Hz Monitor);
      GPU2: GTX 750ti Strix(For 2nd monitor rendering to get 100% performances from 1st 144Hz Monitor);
      MotherBoard: MSI x470 GAMING PLUS
      Hard Disk 1 (Windows 10): Samsung EVO M.2;
      Hard Disk 2 (For Storage): RAID (1) between two hard disks;
      Hard Disk 3 (For Mojave): Kingston SSD 120GB;

      I have created my USB with this:
       
      Create Bootable USB Code: sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/USB -- /Applications/Install\ macOS\ Mojave.app -- nointeract && say Done. Clover Settings: Boot: Verbose; dart=0; nv_disable=0; kext-dev-mode=1; GraphicsEnabler=No; XMPDetection = No. Cpu: C6. Devices: (Not Enabled = [ ] - Enabled = [-] - Full Enabled [✓]) Inject (Full Enabled); Add ClockID (Full Enabled); FixOwnership (Full Enabled); Gui: (Not Enabled = [ ] - Enabled = [-] - Full Enabled [✓]) Enabled (Full Enabled); Screen Resolution: 1920x1080; Kernel and Kext Patches: (Not Enabled = [ ] - Enabled = [-] - Full Enabled [✓]) Apple RTC (Full Enabled); KernelPm (Full Enabled); SMBIOS: iMac(18,3); System Parameters: Inject Kexts = Yes; Inject System ID; Used Kexts: FakeSMC FakePCIID NVIDIA WEB LILU BIOS: VT-d = Disabled; XHCI Hand-Off = Enabled; Legacy USB Support: Enabled; Hard Disk: AHCI Mode; Selection Mode: Legacy + EUFI; Clover Install Log:
      Full Error Log:
       
    • By tokia
      Hello,
       
      My desktop Hackintosh is running macOS Mojave 10.14.2 with two dedicated GPUs installed: NVIDIA GTX 1080 Ti, AMD Radeon HD 7970.
       
      The AMD GPU is used primarily under macOS and the NVIDIA one under Windows.
       
      macOS boots without issues as long as there are no displays connected to the NVIDIA GPU. If a display is connected then the display connected to the AMD GPU will become blank. The system can be accessed using Screen Sharing/VNC.
       
      There are no problems if I swap PCI-e slots for the GPUs so that the AMD GPU is in the first slot (primary GPU), but I prefer not to do this.
       
      I have tried to remove the whole PCI (bridge) device in the DSDT file and all the lines that refer to it. The PCI entries in ioreg and System Information are gone but System Information still shows an NVIDIA GPU under Graphics/Display.
       
      Many of the suggestions I have found in guides and forum posts do not seem to apply here. My problem with some of the guides and answers is that they give the solution without explaining how anything works, or they tell you what to do without explaining the reasons behind it.
       
      What else can I do? Thank you for any assistance you can provide!
       
      I have attached some files that may help you help me.
       
      DSDT_BIOS_3101.zip contains the original ACPI (*.aml) files without any patches.
      Send me Steffens-iMac.zip is a file produced by RunMe.app, and do contain simple patches to rename some devices.
      DSDT.dsl.patch is a diff of the original DSDT.dsl file and the one with the PCI devices removed (commented out).
       
      Motherboard: ASUS Rampage V Extreme (X99), BIOS version 3101 (macOS does not boot with anything newer).
      Clover version: 4813.
       
      DSDT.dsl.patch:
      --- /Users/sl/Desktop/DSDT_BIOS_3101/DSDT.dsl 2018-12-17 05:24:30.000000000 +0100 +++ /Volumes/EFI/EFI/CLOVER/ACPI/patched/DSDT.dsl 2018-12-17 16:52:08.000000000 +0100 @@ -5,7 +5,7 @@ * * Disassembling to symbolic ASL+ operators * - * Disassembly of DSDT.aml, Mon Dec 17 05:24:30 2018 + * Disassembly of DSDT.aml, Mon Dec 17 04:01:52 2018 * * Original Table Header: * Signature "DSDT" @@ -2128,7 +2128,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -2274,7 +2274,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -2420,7 +2420,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -2570,7 +2570,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -2803,12 +2803,14 @@ If ((CSTA (Arg0, Arg1) == 0x00)) { FLAG = 0x00 - PRID (APID = 0xFF) = 0xFF + APID = 0xFF + PRID = 0xFF } Else { Local0 = APID - PRID (FLAG = 0x01) = Local0 + FLAG = 0x01 + PRID = Local0 } Return (APIC) @@ -15259,7 +15261,7 @@ ^BR2B.OSHP () ^BR2C.OSHP () ^BR2D.OSHP () - ^BR3A.OSHP () + //^BR3A.OSHP () ^BR3B.OSHP () ^BR3C.OSHP () ^BR3D.OSHP () @@ -26861,7 +26863,7 @@ } } - Device (BR3A) + /*Device (BR3A) { Name (_ADR, 0x00030000) // _ADR: Address OperationRegion (MCTL, SystemMemory, 0xE0013188, 0x04) @@ -27496,7 +27498,7 @@ { Name (_ADR, 0xFFFF) // _ADR: Address } - } + }*/ Device (BR3B) { @@ -30267,7 +30269,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -30567,21 +30569,21 @@ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4158, // Range Minimum - 0x0000, // Range Maximum + 0x4158, // Range Maximum 0x0000, // Translation Offset 0x0001, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x5758, // Range Minimum - 0x0000, // Range Maximum + 0x5758, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x5858, // Range Minimum - 0x0000, // Range Maximum + 0x5858, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) @@ -37604,7 +37606,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -37904,21 +37906,21 @@ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4558, // Range Minimum - 0x0000, // Range Maximum + 0x4558, // Range Maximum 0x0000, // Translation Offset 0x0001, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4259, // Range Minimum - 0x0000, // Range Maximum + 0x4259, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4359, // Range Minimum - 0x0000, // Range Maximum + 0x4359, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) @@ -44941,7 +44943,7 @@ ^^PCI0.BR2B.OSHP () ^^PCI0.BR2C.OSHP () ^^PCI0.BR2D.OSHP () - ^^PCI0.BR3A.OSHP () + //^^PCI0.BR3A.OSHP () ^^PCI0.BR3B.OSHP () ^^PCI0.BR3C.OSHP () ^^PCI0.BR3D.OSHP () @@ -45241,21 +45243,21 @@ WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4958, // Range Minimum - 0x0000, // Range Maximum + 0x4958, // Range Maximum 0x0000, // Translation Offset 0x0001, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4559, // Range Minimum - 0x0000, // Range Maximum + 0x4559, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode, EntireRange, 0x0000, // Granularity 0x4659, // Range Minimum - 0x0000, // Range Maximum + 0x4659, // Range Maximum 0x0000, // Translation Offset 0x0000, // Length ,, , TypeStatic, DenseTranslation) @@ -53823,7 +53825,7 @@ Notify (\_SB.PCI0.BR2D.H007, Local0) } - If ((\_SB.PCI0.BR3A.PMEP == 0x01)) + /*If ((\_SB.PCI0.BR3A.PMEP == 0x01)) { Local0 = \_SB.PCI0.BR3A.PMEH (0x05) } @@ -53848,7 +53850,7 @@ Notify (\_SB.PCI0.BR3A.H005, Local0) Notify (\_SB.PCI0.BR3A.H006, Local0) Notify (\_SB.PCI0.BR3A.H007, Local0) - } + }*/ If ((\_SB.PCI0.BR3B.PMEP == 0x01)) { @@ -54608,11 +54610,11 @@ \_SB.PCI0.BR2D.PMEP = 0x01 } - If ((Local1 == 0x07)) + /*If ((Local1 == 0x07)) { \_SB.PCI0.BR3A.PMES = 0x01 \_SB.PCI0.BR3A.PMEP = 0x01 - } + }*/ If ((Local1 == 0x08)) { @@ -54879,10 +54881,10 @@ Notify (\_SB.PCI0.BR2D, 0x02) } - If ((\_SB.PCI0.BR3A.DEVS () != 0x00)) + /*If ((\_SB.PCI0.BR3A.DEVS () != 0x00)) { Notify (\_SB.PCI0.BR3A, 0x02) - } + }*/ If ((\_SB.PCI0.BR3B.DEVS () != 0x00)) { @@ -55927,10 +55929,10 @@ { Notify (\_SB.PCI0.BR2D, 0x00) } - Case (0x28) + /*Case (0x28) { Notify (\_SB.PCI0.BR3A, 0x00) - } + }*/ Case (0x29) { Notify (\_SB.PCI0.BR3B, 0x00) @@ -56736,11 +56738,11 @@ } } - Scope (_SB.PCI0.BR3A) + /*Scope (_SB.PCI0.BR3A) { Method (_DSM, 4, NotSerialized) // _DSM: Device-Specific Method { - If ((Arg0 == ToUUID ("e5c937d0-3553-4d7a-9117-ea4d19c3434d") /* Device Labeling Interface */)) + If ((Arg0 == ToUUID ("e5c937d0-3553-4d7a-9117-ea4d19c3434d") / * Device Labeling Interface * /)) { If (((Arg1 == 0x02) && (Arg2 == 0x00))) { @@ -56765,7 +56767,7 @@ 0x00 }) } - } + }*/ Scope (_SB.PCI1.QR1A) {  
      DSDT_BIOS_3101.zip
      Send me Steffens-iMac.zip
      DSDT.dsl.patch
    • By twikoffin
      Hello. My hardware is:
      AMD Athlon X2 7750 dual-core
      Gigabyte NVIDIA 8400GS 512MB ( [VGA] ,HDMI,DVI)
      Motherboard Gigabyte based on NFORCE without AHCI support (only IDE)
      I have successfully installed Mac OS Yosemite, Mavericks and El Capitan with AppleNFORCEATA.kext
      But I can't use it with Mac OS 10.8, don't know why, it just gives error and my internal HDD's are not appearing in Disk Utility.

       
         
×