Jump to content

Choppy sound issues + clock remaining behind


42 posts in this topic

Recommended Posts

Hi Guys,

 

I am having some problems with my setup (check the signature) most of the time the sound is choppy and the clock remains behind (it is now 8:09 PM and it show 6:59 PM) did anyone encounter such problems can they be fixed ?

 

Thank you,

Link to comment
Share on other sites

@Rogiervd: i am not using dual boot i have only OS X on this machine

 

@Gringo Vermelho: i see that they are talking about slow sata speeds over there are you sure i can do the same modifications ?

 

If it helps i can post my DSDT

Link to comment
Share on other sites

Hi Ion, you also should boot Clover EFI once, retrieve the BusSpeedkHz value (right after CPU frequency in the wiki) from the boot log, and set it in your config for use in UEFI mode.

According to Slice the automatic detection is not accurate in UEFI mode and I recently had some sound issues because of it myself with 10.9.

Link to comment
Share on other sites

ok so i booted normally with clover (not UEFI) this is my preboot.log but i dont see anything regarding BusSpeedkHz

0:100  0:100  MemLog inited, TSC freq: 2700390080
0:100  0:000  
0:100  0:000  Starting rEFIt rev 1794 on American Megatrends EFI
0:100  0:000  SelfDevicePath=PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(1,GPT,69d7d053-8b98-4808-a75d-cd6009790ff0,0x28,0x64000) @D1F1D818
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 1067
0:100  0:000  SmbiosTable.Type17->Size = 4096
0:100  0:000  Type 17 Index = 1
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0
0:100  0:000  SmbiosTable.Type17->Size = 0
0:100  0:000  Type 17 Index = 2
0:100  0:000  SmbiosTable.Type17->Speed = 1067
0:100  0:000  SmbiosTable.Type17->Size = 4096
0:100  0:000  Type 17 Index = 3
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0
0:100  0:000  SmbiosTable.Type17->Size = 0
0:100  0:000  Boot status=0
0:100  0:000  Clover revision: 1794  running on MS-7758
0:100  0:000  ... with board ZH77A-G43 (MS-7758)
0:115  0:014  ConfigPlistPath: EFI\CLOVER\config.plist
0:122  0:007  Using OEM config.plist at path: EFI\CLOVER\config.plist
0:123  0:000  Loading early settings
0:123  0:000  timeout set to 1
0:123  0:000  Default theme: black_green
0:123  0:000  LoadDrivers() start
0:125  0:002  Starting DataHubDxe-64.efi
0:126  0:001  Using load options 'DataHubDxe-64.efi  '
0:152  0:025  Starting EmuVariableUefi-64.efi
0:153  0:001  Using load options 'EmuVariableUefi-64.efi  '
0:154  0:000  EmuVariableUefi Initialize: VariableCommonInitialize = Success, orig services stored, install gEmuVariableControlProtocolGuid = Success
0:155  0:001  Starting FSInject-64.efi
0:156  0:001  Using load options 'FSInject-64.efi  '
0:156  0:000  Starting OsxFatBinaryDrv-64.efi
0:158  0:001  Using load options 'OsxFatBinaryDrv-64.efi  '
0:158  0:000  Starting PartitionDxe-64.efi
0:159  0:001  Using load options 'PartitionDxe-64.efi  '
0:159  0:000   - driver needs connecting
0:159  0:000  Starting VboxHfs-64.efi
0:161  0:001  Using load options 'VboxHfs-64.efi  '
0:161  0:000   - driver needs connecting
0:161  0:000  Starting OsxAptioFixDrv-64.efi
0:162  0:001  Using load options 'OsxAptioFixDrv-64.efi  '
0:163  0:000  2 drivers needs connecting ...
0:163  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:163  0:000  Partition driver loaded: 
0:163  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:371  0:208  LoadDrivers() end
0:371  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent = Success, done
0:410  0:038  SetMaxResolution: found best mode 2: 1024x768 - already set
0:410  0:000  SetScreenResolution: 1024x768 - already set
0:410  0:000  reinit: self device path=PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(1,GPT,69d7d053-8b98-4808-a75d-cd6009790ff0,0x28,0x64000)
0:410  0:000  new SelfHandle=D1F1D818
0:410  0:000  CPU Vendor = 756E6547 Model=206A7
0:410  0:000  The CPU not supported turbo
0:410  0:000  BrandString = Intel(R) Pentium(R) CPU G630 @ 2.70GHz
0:410  0:000  non-usable FLEX_RATIO = 10000
0:410  0:000  corrected FLEX_RATIO = 0
0:410  0:000  FSBFrequency=100MHz
0:410  0:000  Corrected FSBFrequency=100MHz
0:410  0:000  Vendor/Model/Stepping: 0x756E6547/0x2A/0x7
0:410  0:000  Family/ExtFamily: 0x6/0x0
0:410  0:000  MaxDiv/MinDiv: 27.0/16
0:410  0:000  Turbo: 27/27/27/27
0:410  0:000  Features: 0xBFEBFBFF
0:410  0:000  Threads: 2
0:410  0:000  Cores: 2
0:410  0:000  FSB: 100 MHz
0:410  0:000  CPU: 2700 MHz
0:410  0:000  TSC: 2700 MHz
0:410  0:000  PIS: 400 MHz
0:410  0:000  PCI (00|00:00.00) : 8086 0100 class=060000
0:410  0:000  PCI (00|00:01.00) : 8086 0101 class=060400
0:410  0:000  PCI (00|01:00.00) : 1002 683D class=030000
0:410  0:000  Found Radeon model=AMD Radeon HD 7770 Series
0:410  0:000  PCI (00|01:00.01) : 1002 AAB0 class=040300
0:410  0:000  PCI (00|00:14.00) : 8086 1E31 class=0C0330
0:410  0:000  PCI (00|00:16.00) : 8086 1E3A class=078000
0:410  0:000  PCI (00|00:16.01) : FFFF FFFF class=FFFFFF
0:410  0:000  PCI (00|00:1A.00) : 8086 1E2D class=0C0320
0:410  0:000  PCI (00|00:1B.00) : 8086 1E20 class=040300
0:410  0:000  PCI (00|00:1C.00) : 8086 1E10 class=060400
0:410  0:000  PCI (00|00:1C.01) : 8086 1E12 class=060400
0:410  0:000  PCI (00|03:00.00) : 10EC 8168 class=020000
0:410  0:000  PCI (00|00:1C.03) : 8086 244E class=060401
0:410  0:000  PCI (00|04:00.00) : 1B21 1080 class=060400
0:410  0:000  PCI (00|00:1D.00) : 8086 1E26 class=0C0320
0:410  0:000  PCI (00|00:1F.00) : 8086 1E4A class=060100
0:410  0:000  PCI (00|00:1F.02) : 8086 1E02 class=010601
0:410  0:000  PCI (00|00:1F.03) : 8086 1E22 class=0C0500
0:410  0:000  ScanSPD() start
0:411  0:000  SMBus CmdReg: 0x3
0:411  0:000  Scanning SMBus [8086:1E22], mmio: 0xF7F14004, ioport: 0xF000, hostc: 0x1
0:425  0:014  SPD[0]: Type 11 @0x50 
0:434  0:008  Using XMP Profile1, dropping previous frequency 1333MHz
0:434  0:000  DDR speed 1600MHz 
0:434  0:000  Slot: 0 Type 24 4096MB 1600MHz Vendor=Corsair PartNo=CMZ8GX3M2A1600C9 SerialNo=0000000000000000 
0:454  0:020  SPD[2]: Type 11 @0x52 
0:463  0:008  Using XMP Profile1, dropping previous frequency 1333MHz
0:463  0:000  DDR speed 1600MHz 
0:463  0:000  Slot: 2 Type 24 4096MB 1600MHz Vendor=Corsair PartNo=CMZ8GX3M2A1600C9 SerialNo=0000000000000000 
0:589  0:126  ScanSPD() end
0:589  0:000  Calibrated TSC frequency =2700390080 =2700MHz
0:589  0:000  Loading main settings
0:589  0:000  KextsToPatch: 1 requested
0:589  0:000  KextToPatch 0: AMD7000Controller (Custom Aji framebuffer for HD7770) Kext bin patch, data len: 64
0:589  0:000  found 5 volumes with blockIO
0:589  0:000   0. Volume:
0:589  0:000    PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)
0:590  0:000    Volume 'Whole Disc Boot', OS '', GUID = <null guid>
0:590  0:000   1. Volume:
0:590  0:000    PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(1,GPT,69d7d053-8b98-4808-a75d-cd6009790ff0,0x28,0x64000)
0:621  0:030    Volume 'EFI', OS 'Legacy', GUID = 69D7D053-8B98-4808-A75D-CD6009790FF0
0:621  0:000    This is SelfVolume !!
0:621  0:000   2. Volume:
0:621  0:000    PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(2,GPT,80069576-3118-4373-88bc-50a16e671305,0x64028,0x11765930)
0:667  0:046    Booting OS 10.8.4
0:667  0:000    Volume 'Mountain Lion', OS 'ML', GUID = 80069576-3118-4373-88BC-50A16E671305
0:667  0:000   3. Volume:
0:667  0:000    PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(3,GPT,8c9c38ce-9a30-48d4-8057-655d1fbbc9ff,0x11809958,0x61d00e90)
0:689  0:022    Volume 'stuff', OS '', GUID = 8C9C38CE-9A30-48D4-8057-655D1FBBC9FF
0:689  0:000   4. Volume:
0:689  0:000    PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(4,GPT,af5ac1b4-4626-4b5a-824a-f80063a44b1c,0x7354a7e8,0x117c5a0)
0:732  0:042    Booting OS 10.8.3
0:732  0:000    Volume 'Install Mac OS X Mountain Lion', OS 'ML', GUID = AF5AC1B4-4626-4B5A-824A-F80063A44B1C
0:732  0:000  Searching volumes for latest nvram.plist ...
0:732  0:000    1. Volume 'EFI', GUID = 69D7D053-8B98-4808-A75D-CD6009790FF0 - no nvram.plist - skipping!
0:732  0:000    2. Volume 'Mountain Lion', GUID = 80069576-3118-4373-88BC-50A16E671305 - no nvram.plist - skipping!
0:732  0:000    3. Volume 'stuff', GUID = 8C9C38CE-9A30-48D4-8057-655D1FBBC9FF - no nvram.plist - skipping!
0:732  0:000    4. Volume 'Install Mac OS X Mountain Lion', GUID = AF5AC1B4-4626-4B5A-824A-F80063A44B1C - no nvram.plist - skipping!
0:732  0:000   nvram.plist not found!
0:732  0:000  PutNvramPlistToRtVars: nvram.plist not found
0:770  0:037  OS main and drive as badge
0:770  0:000  Theme: black_green Path: EFI\CLOVER\themes\black_green
0:771  0:000  OS main and drive as badge
0:771  0:000  reinitImages...
0:786  0:015    Icon 15 (icons\vol_internal_hfs.icns) not found
0:786  0:000    Theme path EFI\CLOVER\themes\black_green, ThemeDir=D1EFF398
0:800  0:014  font WoB_PTMono_10W_NA.png loaded from themedir
0:800  0:000  Font loaded: ImageWidth=176 ImageHeight=288 Ptr=CFBB2018
0:800  0:000  Font 2 prepared WxH=11x18 CharWidth=10
0:800  0:000  Scanning loaders... HideUEFI=No
0:800  0:000   0: 'Whole Disc Boot' no file system
0:800  0:000   1: 'EFI'
0:800  0:000  HideBadges=3 Volume=EFI
0:801  0:000  Show badge as drive
0:803  0:002    added 'Boot UEFI internal from EFI'
0:803  0:000   2: 'Mountain Lion'
0:810  0:007  HideBadges=3 Volume=Mountain Lion
0:810  0:000  Show badge as drive
0:834  0:023    added 'Boot Mac OS X from Mountain Lion'
0:836  0:002   3: 'stuff'
0:838  0:001   4: 'Install Mac OS X Mountain Lion'
0:839  0:000  HideBadges=3 Volume=Install Mac OS X Mountain Lion
0:839  0:000  Show badge as drive
0:874  0:035    added 'Boot Mac OS X from Install Mac OS X Mountain Lion'
0:905  0:031  Checking EFI partition Volume 1 for Clover
0:906  0:000   Found Clover
0:908  0:001  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
0:908  0:000  FindBootOptionForFile: D1F1D818, \EFI\CLOVER\CLOVERX64.EFI
0:908  0:000  BootOrder: 3: Boot0005, Boot0003, Boot0004
0:908  0:000   Searching for: PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(1,GPT,69d7d053-8b98-4808-a75d-cd6009790ff0,0x28,0x64000)/\EFI\CLOVER\CLOVERX64.EFI (Len: 130)
0:908  0:000   and for: HD(1,GPT,69d7d053-8b98-4808-a75d-cd6009790ff0,0x28,0x64000)/\EFI\CLOVER\CLOVERX64.EFI (Len: 102)
0:909  0:001  FindBootOptionForFile: Not found.
0:909  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent = Success, done
0:951  0:041  found tools\Shell64U.efi
0:955  0:003  FindDefaultEntry ...
0:955  0:000  FindStartupDiskVolume ...
0:955  0:000  GetEfiBootDeviceFromNvram:
0:955  0:000   efi-boot-device-data: PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(2,GPT,80069576-3118-4373-88bc-50a16e671305,0x64028,0x11765930)
0:955  0:000   Volume: 'PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(2,GPT,80069576-3118-4373-88bc-50a16e671305,0x64028,0x11765930)'
0:955  0:000   LoaderPath: '<null string>'
0:955  0:000   Guid = 80069576-3118-4373-88BC-50A16E671305
0:955  0:000  FindStartupDiskVolume searching ...
0:955  0:000   volume: partition = PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(2,GPT,80069576-3118-4373-88bc-50a16e671305,0x64028,0x11765930)
0:955  0:000   searching for that partition
0:955  0:000    found entry 1. 'Boot Mac OS X from Mountain Lion', Volume 'Mountain Lion'
0:955  0:000  Boot redirected to Entry 1. 'Boot Mac OS X from Mountain Lion'
0:955  0:000  Use anime=Anim_1_Logo_IntroOutro frames=381
1:461  0:506   found 381 frames of the anime
1:761  0:299  GUI ready

and the resuld of sudo dmesg:

PMAP: PCID enabled
Darwin Kernel Version 12.4.0: Wed May  1 17:57:12 PDT 2013; root:xnu-2050.24.15~1/RELEASE_X86_64
vm_page_bootstrap: 1997376 free pages and 83392 wired pages
kext submap [0xffffff7f80737000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000737000]
zone leak detection enabled
standard timeslicing quantum is 10000 us
standard background quantum is 2500 us
mig_table_max_displ = 74
TSC Deadline Timer supported and enabled
corecrypto kext started!
Running kernel space in FIPS MODE
Plist hmac value is    735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
corecrypto.kext FIPS integrity POST test passed!
corecrypto.kext FIPS AES CBC POST test passed!
corecrypto.kext FIPS TDES CBC POST test passed!
corecrypto.kext FIPS SHA POST test passed!
corecrypto.kext FIPS HMAC POST test passed!
corecrypto.kext FIPS ECDSA POST test passed!
corecrypto.kext FIPS DRBG POST test passed!
corecrypto.kext FIPS POST passed!
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.

MAC Framework successfully initialized
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x20 Vectors 64:87
ACPI: System State [S0 S3 S4 S5]
PFM64 (36 cpu) 0xf80000000, 0x80000000
[ PCI configuration begin ]
PCI configuration changed (bridge=2 device=1 cardbus=0)
[ PCI configuration end, bridges 6 devices 12 ]
AppleIntelCPUPowerManagement: Turbo Ratios 0000
AppleIntelCPUPowerManagement: (built 22:41:17 Jan  6 2013) initialization complete
RealtekR1000: init
RealtekR1000: start
HWSensors Project Copyright 2013 netkas, slice, usr-sse2, kozlek, navi, THe KiNG, RehabMan. All rights reserved.
FakeSMCDevice: 15 preconfigured keys added
FakeSMCDevice: 5 keys exported by Clover EFI
SMC: successfully initialized
CPUSensors: CPU family 0x6, model 0x2a, stepping 0x7, cores 2, threads 2, TJmax 102
mbinit: done [96 MB total pool size, (64/32) split]
Pthread support ABORTS when sync kernel primitives misused
CPUSensors: setting platform to k62
rooting via boot-uuid from /chosen: EBBDFFE5-7EB6-3CE6-B5E7-DA654391247D
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDataless load succeeded
AppleIntelCPUPowerManagementClient: ready
RealtekR1000: R1000InitBoard @ PCI 0x3,00
RTL8xxx@0xd000: Found chip reg=2f900d00
RTL8xxx@0xd000: Realtek RTL8168E-VL/8111E-VL_2 (mcfg 30)
identified as RTL8168E-VL/8111E-VL_2
SuperIODevice: found Fintek F71869A on port=0x4e address=0x290
F718xxSensors: started
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SAT0@1F,2/AppleIntelPchSeriesAHCI/SPT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/ST1000DM003-9YN162 Media/IOGUIDPartitionScheme/ml@2
BSD root: disk0s2, major 1, minor 2
RTL8xxx@0xd000: 1000Mbps Full-duplex operation, TBI Link Failed
RTL8xxx@0xd000: Link Status: Not Linked
RTL8xxx@0xd000: registerWithPolicyMaker
RTL8xxx@0xd000: setPowerState(1)
RTL8xxx@0xd000: configureInterface
RTL8xxx@0xd000: attaching as en0
en0: start: returning '1'
jnl: unknown-dev: replay_journal: from: 3504128 to: 7940096 (joffset 0x460000)
jnl: unknown-dev: journal replay done.
Kernel is LP64
hfs: Removed 2 orphaned / unlinked files and 23 directories 
com_chucko_RealtekR1000: Ethernet address d4:3d:7e:26:d9:9a
en0: enable
en0: setActivationLevel(2)
en0: Selected medium is NULL, forcing to autonegotiation
en0: selectMedium, index=6
en0: R1000SetMedium(0x2, 0x2, 0x1)
[IOBluetoothHCIController][start] -- completed
Sound assertion in AppleHDAController at line 816
Previous Shutdown Cause: 5
DSMOS has arrived
Sound assertion in AppleHDAController at line 1294
en0: setLinkStatus but no PHYStatus
[AGPM Controller] unknownPlatform
AMDVerdeGraphicsAccelerator: ** Device in slot: SLOT--1 **
jnl: disk0s3: replay_journal: from: 63036416 to: 63405056 (joffset 0x1877000)
en0: Link up
jnl: disk0s3: journal replay done.
macx_swapon SUCCESS
Sandbox: sandboxd(188) deny mach-lookup com.apple.coresymbolicationd
Link to comment
Share on other sites

ok so this is how my config.plist looks now:

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>ACPI</key>
	<dict>
		<key>DropOemSSDT</key>
		<false/>
		<key>DsdtName</key>
		<string>DSDT.aml</string>
		<key>GenerateCStates</key>
		<false/>
		<key>GeneratePStates</key>
		<false/>
	</dict>
	<key>CPU</key>
	<dict>
		<key>BusSpeedkHz</key>
		<string>100000</string>
		<key>Turbo</key>
		<false/>
	</dict>
	<key>GUI</key>
	<dict>
		<key>DebugLog</key>
		<false/>
		<key>Mouse</key>
		<dict>
			<key>Enabled</key>
			<false/>
		</dict>
		<key>Theme</key>
		<string>black_green</string>
		<key>Timeout</key>
		<integer>1</integer>
		<key>Volumes</key>
		<dict>
			<key>Legacy</key>
			<string>No</string>
		</dict>
	</dict>
	<key>Graphics</key>
	<dict>
		<key>FBName</key>
		<string>Aji</string>
		<key>GraphicsInjector</key>
		<false/>
		<key>VideoPorts</key>
		<string>4</string>
	</dict>
	<key>KernelAndKextPatches</key>
	<dict>
		<key>AppleRTC</key>
		<true/>
		<key>Debug</key>
		<false/>
		<key>KernelCpu</key>
		<false/>
		<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Comment</key>
				<string>Custom Aji framebuffer for HD7770</string>
				<key>Find</key>
				<data>
				AAQAAAQDAAAAAQEAEgQFAQAEAAAEAwAAAAECACIFBAIE
				AAAAFAIAAAABAwAAAAMGAAgAAAQCAAAAAQQAEQIBBA==
				</data>
				<key>Name</key>
				<string>AMD7000Controller</string>
				<key>Replace</key>
				<data>
				AAQAAAQDAAAAAQEAEgQFAQAEAAAEAwAAAAECABIEBAIE
				AAAAFAIAAAABAwAQAAMEAAgAAAQCAAAAAQQAIgUBBQ==
				</data>
			</dict>
		</array>
	</dict>
	<key>PCI</key>
	<dict>
		<key>HDAInjection</key>
		<false/>
		<key>InjectClockID</key>
		<false/>
		<key>USBFixOwnership</key>
		<false/>
		<key>USBInjection</key>
		<false/>
	</dict>
	<key>RtVariables</key>
	<dict>
		<key>MLB</key>
		<string>CG154TB9WU3234567</string>
		<key>ROM</key>
		<data>
		1D1+Jtma
		</data>
	</dict>
	<key>SMBIOS</key>
	<dict>
		<key>BiosReleaseDate</key>
		<string>09/03/09</string>
		<key>BiosVersion</key>
		<string>IM101.88Z.00CC.B00.0909031926</string>
		<key>Board-ID</key>
		<string>Mac-F2268CC8</string>
		<key>Family</key>
		<string>iMac</string>
		<key>ProductName</key>
		<string>iMac10,1</string>
		<key>SerialNumber</key>
		<string>W8043163B9U</string>
	</dict>
	<key>SystemParameters</key>
	<dict>
		<key>boot-args</key>
		<string>slide=0 npci=0x3000 -v</string>
		<key>iCloudFix</key>
		<true/>
		<key>prev-lang:kbd</key>
		<string>en:0</string>
	</dict>
</dict>
</plist>

so i should try to boot UEFI and see if the problem appears again right?

Link to comment
Share on other sites

I don't know if you noticed that that the plist had the value in MHz, and you've now set it in KHz.

 

100 MHz and 100000 KHz is mathematically the exact same value, so, as long as Clover supports setting this value in KHz, nothing has changed!

I believe that was with legacy boot, where as the UEFI boot may give him a slightly different frequency (more precise, according to the devs).

 

 

Though I'm not sure he booted in legacy mode:

Starting rEFIt rev 1794 on American Megatrends EFI

Try booting with Chameleon if you can, take note of the bdmesg values and try them in Clover.

Link to comment
Share on other sites

so far so good seems that the problem is fixed :D

 

@Maniac10 i disabled all the EFI options in the BIOS and let clover boot in normal mode... unfortunately i cannot use chameleon because it doesn't get along well with my GPU :(

Link to comment
Share on other sites

I don't know if you noticed that that the plist had the value in MHz, and you've now set it in KHz.

 

100 MHz and 100000 KHz is mathematically the exact same value, so, as long as Clover supports setting this value in KHz, nothing has changed!

The debug line shows a rounded value for the calculated FSB and it is not exactly 100 MHz / 100,000 kHz.

Link to comment
Share on other sites

I tried to find a more accurate value in ioreg and here are my results for both modes:

Command:

ioreg -pIODeviceTree -fl | grep FSBFrequency

UEFI automatic detection:

"FSBFrequency" = <a518f60500000000> > 0x05F618A5 > 100,014,245

EFI automatic detection:

"FSBFrequency" = <3aebf50500000000> > 0x05F5EB3A > 100,002,618

Will be using 100003 now and see how it runs.

 

EDIT: Distortions with 100003, reverting back to 100000 that I already confirmed to run fine. 100002 might also work.

Edited by k3nny
  • Like 1
Link to comment
Share on other sites

If anyone still has problems, try Clover r1931+. It has a more precise algorithm for calculating the BusSpeed.

houston we have a problem i repeat we has a problem :( 

 

worked fine yesterday but now surprise the same s**t all over again...

Link to comment
Share on other sites

Then you should note the BusSpeed that works well for you and manually enter it in your config file. It would be interesting to know the value that worked well for you and the ones that were bad.

Link to comment
Share on other sites

Then you should note the BusSpeed that works well for you and manually enter it in your config file. It would be interesting to know the value that worked well for you and the ones that were bad.

im starting to think it's not a bus problem but a DSDT one...
Link to comment
Share on other sites

From earlier posts, I see that it was suggested to use FSB as 100 MHz and then do the simple conversion to KHz. Looking at the instructions for Clover and from how bus speeds are usually listed by manufacturers, it may not be 100, but more 99.7 MHz, etc. This may seem small but is significant for clover. My advice would be to boot with EFI mode and generate the boot config or use Darwin Dumper to view the current booted config and see the Bus Speed value there. You could also try 99790 or 99775 as a manual string. Ideally, you should do the EFI boot.

Link to comment
Share on other sites

so i booted in EFI mode and here is the log...

0:100  0:100  MemLog inited, TSC freq: 2700416360
0:100  0:000  
0:100  0:000  Starting rEFIt rev 1928 on American Megatrends EFI
0:100  0:000  SelfDevicePath=PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(1,GPT,69d7d053-8b98-4808-a75d-cd6009790ff0,0x28,0x64000) @D1F1D998
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  Total Memory Slots Count = 4
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 1067
0:100  0:000  SmbiosTable.Type17->Size = 4096
0:100  0:000  Type 17 Index = 1
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0
0:100  0:000  SmbiosTable.Type17->Size = 0
0:100  0:000  Type 17 Index = 2
0:100  0:000  SmbiosTable.Type17->Speed = 1067
0:100  0:000  SmbiosTable.Type17->Size = 4096
0:100  0:000  Type 17 Index = 3
0:100  0:000  Ignoring insane frequency value 0MHz
0:100  0:000  SmbiosTable.Type17->Speed = 0
0:100  0:000  SmbiosTable.Type17->Size = 0
0:100  0:000  Boot status=0
0:100  0:000  Clover revision: 1928  running on MS-7758
0:100  0:000  ... with board ZH77A-G43 (MS-7758)
0:112  0:012  ConfigPlistPath: EFI\CLOVER\config.plist
0:122  0:010  Using OEM config.plist at path: EFI\CLOVER\config.plist
0:123  0:000  Loading early settings
0:123  0:000  timeout set to 1
0:123  0:000  Default theme: mlcamp
0:123  0:000  LoadDrivers() start
0:125  0:002  Starting DataHubDxe-64.efi
0:136  0:011  Using load options 'DataHubDxe-64.efi  '
0:162  0:025  Starting EmuVariableUefi-64.efi
0:164  0:001  Using load options 'EmuVariableUefi-64.efi  '
0:164  0:000  EmuVariableUefi Initialize: VariableCommonInitialize = Success, orig services stored, install gEmuVariableControlProtocolGuid = Success
0:165  0:001  Starting FSInject-64.efi
0:167  0:001  Using load options 'FSInject-64.efi  '
0:167  0:000  Starting OsxAptioFixDrv-64.efi
0:168  0:001  Using load options 'OsxAptioFixDrv-64.efi  '
0:169  0:000  Starting OsxFatBinaryDrv-64.efi
0:170  0:001  Using load options 'OsxFatBinaryDrv-64.efi  '
0:170  0:000  Starting PartitionDxe-64.efi
0:172  0:001  Using load options 'PartitionDxe-64.efi  '
0:172  0:000   - driver needs connecting
0:172  0:000  Starting VBoxHfs-64.efi
0:173  0:001  Using load options 'VBoxHfs-64.efi  '
0:174  0:000   - driver needs connecting
0:174  0:000  2 drivers needs connecting ...
0:174  0:000  PlatformDriverOverrideProtocol->GetDriver overriden
0:174  0:000  Partition driver loaded: 
0:174  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:439  0:265  LoadDrivers() end
0:439  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent = Success, done
0:479  0:039  SetMaxResolution: found best mode 2: 1024x768 - already set
0:479  0:000  reinit: self device path=PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(1,GPT,69d7d053-8b98-4808-a75d-cd6009790ff0,0x28,0x64000)
0:479  0:000  new SelfHandle=D1F1D998
0:479  0:000  CPU Vendor = 756E6547 Model=206A7
0:479  0:000  The CPU not supported turbo
0:479  0:000  BrandString = Intel(R) Pentium(R) CPU G630 @ 2.70GHz
0:479  0:000  non-usable FLEX_RATIO = 10000
0:479  0:000  corrected FLEX_RATIO = 0
0:479  0:000  FSBFrequency=100MHz
0:479  0:000  Corrected FSBFrequency=100MHz
0:479  0:000  Vendor/Model/Stepping: 0x756E6547/0x2A/0x7
0:479  0:000  Family/ExtFamily: 0x6/0x0
0:479  0:000  MaxDiv/MinDiv: 27.0/16
0:479  0:000  Turbo: 27/27/27/27
0:479  0:000  Features: 0xBFEBFBFF
0:479  0:000  Threads: 2
0:479  0:000  Cores: 2
0:479  0:000  FSB: 100 MHz
0:479  0:000  CPU: 2700 MHz
0:479  0:000  TSC: 2700 MHz
0:479  0:000  PIS: 400 MHz
0:479  0:000  PCI (00|00:00.00) : 8086 0100 class=060000
0:479  0:000  PCI (00|00:01.00) : 8086 0101 class=060400
0:479  0:000  PCI (00|01:00.00) : 1002 683D class=030000
0:479  0:000  Found Radeon model=AMD Radeon HD 7770 Series
0:479  0:000  PCI (00|01:00.01) : 1002 AAB0 class=040300
0:479  0:000  PCI (00|00:14.00) : 8086 1E31 class=0C0330
0:479  0:000  PCI (00|00:16.00) : 8086 1E3A class=078000
0:479  0:000  PCI (00|00:16.01) : FFFF FFFF class=FFFFFF
0:479  0:000  PCI (00|00:1A.00) : 8086 1E2D class=0C0320
0:479  0:000  PCI (00|00:1B.00) : 8086 1E20 class=040300
0:479  0:000  PCI (00|00:1C.00) : 8086 1E10 class=060400
0:479  0:000  PCI (00|00:1C.01) : 8086 1E12 class=060400
0:479  0:000  PCI (00|03:00.00) : 10EC 8168 class=020000
0:479  0:000  PCI (00|00:1C.03) : 8086 244E class=060401
0:479  0:000  PCI (00|04:00.00) : 1B21 1080 class=060400
0:479  0:000  PCI (00|00:1D.00) : 8086 1E26 class=0C0320
0:479  0:000  PCI (00|00:1F.00) : 8086 1E4A class=060100
0:479  0:000  PCI (00|00:1F.02) : 8086 1E02 class=010601
0:479  0:000  PCI (00|00:1F.03) : 8086 1E22 class=0C0500
0:479  0:000  ScanSPD() start
0:480  0:000  SMBus CmdReg: 0x3
0:480  0:000  Scanning SMBus [8086:1E22], mmio: 0xF7F14004, ioport: 0xF000, hostc: 0x1
0:494  0:014  SPD[0]: Type 11 @0x50 
0:503  0:008  Using XMP Profile1 instead of standard frequency 1333MHz
0:503  0:000  DDR speed 1600MHz 
0:503  0:000  Slot: 0 Type 24 4096MB 1600MHz Vendor=Corsair PartNo=CMZ8GX3M2A1600C9 SerialNo=0000000000000000 
0:523  0:020  SPD[2]: Type 11 @0x52 
0:532  0:008  Using XMP Profile1 instead of standard frequency 1333MHz
0:532  0:000  DDR speed 1600MHz 
0:532  0:000  Slot: 2 Type 24 4096MB 1600MHz Vendor=Corsair PartNo=CMZ8GX3M2A1600C9 SerialNo=0000000000000000 
0:658  0:126  ScanSPD() end
0:658  0:000  Calibrated TSC frequency =2700416360 =2700MHz
0:658  0:000  Loading main settings
0:658  0:000  KextsToPatch: 1 requested
0:658  0:000  KextToPatch 0: AMD7000Controller (Custom Aji framebuffer for HD7770) Kext bin patch, data len: 64
0:658  0:000  found 5 volumes with blockIO
0:658  0:000   0. Volume:
0:658  0:000    PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)
0:685  0:026    Volume 'Whole Disc Boot', OS '', Icon(s) 'legacy', GUID = <null guid>
0:685  0:000   1. Volume:
0:685  0:000    PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(1,GPT,69d7d053-8b98-4808-a75d-cd6009790ff0,0x28,0x64000)
0:686  0:000    Result of bootcode detection: bootable Legacy (legacy)
0:694  0:007    Volume 'EFI', OS 'Legacy', Icon(s) 'legacy', GUID = 69D7D053-8B98-4808-A75D-CD6009790FF0
0:694  0:000    This is SelfVolume !!
0:694  0:000   2. Volume:
0:694  0:000    PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(2,GPT,80069576-3118-4373-88bc-50a16e671305,0x64028,0x11765930)
0:731  0:037    Booting OS 10.8.4
0:731  0:000    Volume 'Mountain Lion', OS 'ML', Icon(s) 'cougar,mac', GUID = 80069576-3118-4373-88BC-50A16E671305
0:731  0:000   3. Volume:
0:731  0:000    PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(3,GPT,8c9c38ce-9a30-48d4-8057-655d1fbbc9ff,0x11809958,0x61d00e90)
0:741  0:010    Volume 'stuff', OS '', Icon(s) '<null string>', GUID = 8C9C38CE-9A30-48D4-8057-655D1FBBC9FF
0:741  0:000   4. Volume:
0:741  0:000    PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(4,GPT,af5ac1b4-4626-4b5a-824a-f80063a44b1c,0x7354a7e8,0x117c5a0)
0:788  0:046    Booting OS 10.8.3
0:788  0:000    Volume 'Install Mac OS X Mountain Lion', OS 'ML', Icon(s) 'cougar,mac', GUID = AF5AC1B4-4626-4B5A-824A-F80063A44B1C
0:788  0:000  Searching volumes for latest nvram.plist ...
0:788  0:000    1. Volume 'EFI', GUID = 69D7D053-8B98-4808-A75D-CD6009790FF0 - no nvram.plist - skipping!
0:788  0:000    2. Volume 'Mountain Lion', GUID = 80069576-3118-4373-88BC-50A16E671305 - no nvram.plist - skipping!
0:788  0:000    3. Volume 'stuff', GUID = 8C9C38CE-9A30-48D4-8057-655D1FBBC9FF - no nvram.plist - skipping!
0:788  0:000    4. Volume 'Install Mac OS X Mountain Lion', GUID = AF5AC1B4-4626-4B5A-824A-F80063A44B1C - no nvram.plist - skipping!
0:788  0:000   nvram.plist not found!
0:788  0:000  PutNvramPlistToRtVars: nvram.plist not found
0:788  0:000  Invalidating BuiltinIcons...
0:838  0:049  Using theme 'mlcamp' (EFI\CLOVER\themes\mlcamp)
0:851  0:013  font mpr.png loaded from themedir
0:851  0:000  Font loaded: ImageWidth=176 ImageHeight=288 Ptr=CFBDC018
0:851  0:000  Font 2 prepared WxH=11x18 CharWidth=10
0:852  0:000  Scanning loaders... HideUEFI=No
0:852  0:000   0: 'Whole Disc Boot' no file system
0:852  0:000   1: 'EFI'
0:881  0:028  HideBadges=0 Volume=EFI
0:881  0:000    added 'Boot UEFI internal from EFI'
0:881  0:000   2: 'Mountain Lion'
0:934  0:053  HideBadges=0 Volume=Mountain Lion
0:936  0:001    added 'Boot Mac OS X from Mountain Lion'
0:939  0:002   3: 'stuff'
0:940  0:001   4: 'Install Mac OS X Mountain Lion'
0:980  0:039  HideBadges=0 Volume=Install Mac OS X Mountain Lion
0:980  0:000    added 'Boot Mac OS X from Install Mac OS X Mountain Lion'
0:986  0:005  Checking EFI partition Volume 1 for Clover
0:987  0:001   Found Clover
0:988  0:001  EmuVariable UninstallEmulation: CloseEvent = Success, original var services restored
0:988  0:000  FindBootOptionForFile: D1F1D998, \EFI\CLOVER\CLOVERX64.EFI
0:988  0:000  BootOrder: 3: Boot0005, Boot0004, Boot0003
0:989  0:000   Searching for: PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(1,GPT,69d7d053-8b98-4808-a75d-cd6009790ff0,0x28,0x64000)/\EFI\CLOVER\CLOVERX64.EFI (Len: 130)
0:989  0:000   and for: HD(1,GPT,69d7d053-8b98-4808-a75d-cd6009790ff0,0x28,0x64000)/\EFI\CLOVER\CLOVERX64.EFI (Len: 102)
0:990  0:001  FindBootOptionForFile: Not found.
0:990  0:000  EmuVariable InstallEmulation: orig vars copied, emu.var.services installed, CreateEvent = Success, done
1:033  0:043  found tools\Shell64U.efi
1:037  0:003  FindDefaultEntry ...
1:037  0:000  FindStartupDiskVolume ...
1:037  0:000  GetEfiBootDeviceFromNvram:
1:037  0:000   efi-boot-device-data: PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(2,GPT,80069576-3118-4373-88bc-50a16e671305,0x64028,0x11765930)
1:037  0:000   Volume: 'PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(2,GPT,80069576-3118-4373-88bc-50a16e671305,0x64028,0x11765930)'
1:037  0:000   LoaderPath: '<null string>'
1:037  0:000   Guid = 80069576-3118-4373-88BC-50A16E671305
1:037  0:000  FindStartupDiskVolume searching ...
1:037  0:000   volume: partition = PciRoot(0x0)/Pci(0x1f,0x2)/Sata(0x0,0x0)/HD(2,GPT,80069576-3118-4373-88bc-50a16e671305,0x64028,0x11765930)
1:037  0:000   searching for that partition
1:037  0:000    found entry 1. 'Boot Mac OS X from Mountain Lion', Volume 'Mountain Lion'
1:037  0:000  Boot redirected to Entry 1. 'Boot Mac OS X from Mountain Lion'
1:037  0:000  DefaultIndex=1 and MainMenu.EntryCount=9
1:037  0:000  RunMainMenu() start
2:013  0:976  GUI ready 

I also noticed something strange... when i boot in UEFI mode on every reboot the BIOS clock gets 3 hours back for example now my OS system time is: 12:51 AM but if i reboot the BIOS time will be: 21:51

Link to comment
Share on other sites

 Share

×
×
  • Create New...