Jump to content

27 posts in this topic

Recommended Posts

I have started testing Mavericks DP1 and installed it on spare USB drive. 

Specs:

Supermicro X8DAE

Dual Xeon 5530

Nvidia GTX 570

24GB RAM

 

From Mountain Lion installation I already know that this motherboard won't work properly W/O replacing AppleACPIPlatform and IOPCIFamily kexts (freezing etc.). So, I have installed as usual with -x, installation went smoothly, but when I replace those two kexts and reboot all my HDDs are missing.

In verbose mode I see that com.apple.driver.AHCIPort has failed to load because of some error ..... I suppose that we'll need updated AppleACPIPlatform and IOPCIFamily kexts for Mavericks?

Share this post


Link to post
Share on other sites
Advertisement

No, drives are there before I replace two kexts. After that they are gone.

I've Googled the issue and I found that couple of guys have the same problem, so this is not isolated case.

Share this post


Link to post
Share on other sites

Maybe theres' a way to fix the issues in DSDT so you don't have to replace kexts. If it works ok but crashes after a while maybe there is a hardware conflict somewhere.

You can try disabling as much on board hardware as possible in the BIOS and removing expansion cards as well. If it works better with less hw in use maybe you'll be able to pinpoint where the conflict is.

 

IORegistryExplorer (comes with xcode dev tools) is useful for tracking down IRQ conflicts. By expanding each device in the tree, you can see which IRQ(s) it sits on. On most motherboards, a handful of IRQs are hardcoded for the HPET and other devices. You can remove these and let OS X distribute the IRQs the way it wants, this can help sometimes. You can also do the opposite, force an IRQ for a specific device.

 

I know "IRQ conflicts" sounds like something from the Windows 95 era but it does happen.

I believe this practice was first documented by THe KiNG here: http://www.projectosx.com/forum/index.php?showtopic=564

Share this post


Link to post
Share on other sites

ACHI set in the BIOS? 

Yes, AHCI is set in BIOS but after replacing AppleACPIPlatform and IOPCIFamily kexts, com.apple.driver.AHCIPort won't load.  Safe boot with original kexts work fine and all drives are there. It will even boot regularly but it is painfully slow and unusable (I had same issue after ML)

I suppose that something has to be modified in added kexts, in order to load AHCIPort driver.

 

Maybe theres' a way to fix the issues in DSDT so you don't have to replace kexts. If it works ok but crashes after a while maybe there is a hardware conflict somewhere.

You can try disabling as much on board hardware as possible in the BIOS and removing expansion cards as well. If it works better with less hw in use maybe you'll be able to pinpoint where the conflict is.

 

I suppose that issue can be fixed in DSDT but I have already went through drill with ML .... removing hardware, turning off one CPU, removing HDDs, changing GPUs, multiple BIOS variations - always the same result (extremely slow performance, but W/O crash). At the end only old AppleACPIPlatform and IOPCIFamily kexts (from Netkas) solved the problem.

I have also tried checking IRQ conflicts, and although I know how to fix some things with DSDT (CPU alias, add GPU, orange icon fix, RTC fix, etc.), it is still above my knowledge after all this years :( Anyway I will see how to remove IRQs because I haven't tried that yet.

 

Thank you for your help guys.

Share this post


Link to post
Share on other sites

 

Here is unmodified DSDT and IOreg.

I have updated to DP2 and the problem is still the same.

 

Thank you @Rampage Dev

 

This DSDT has been edited... 

Share this post


Link to post
Share on other sites

I was sure that's raw DSDT extracted on Windows couple months ago when motherboard arrived (I usually do that first on new MB).

Anyway I have booted clean MountainLion and extracted new DSDT.

NEWdsdt.zip

Share this post


Link to post
Share on other sites

I was sure that's raw DSDT extracted on Windows couple months ago when motherboard arrived (I usually do that first on new MB).

Anyway I have booted clean MountainLion and extracted new DSDT.

Install this DSDT and then get a new IOreg with the app here:

 

http://rampagedev.wordpress.com/guides/how-to-use-ioreg/

 

 

DSDT.aml.zip

Share this post


Link to post
Share on other sites

Update:

I have tried removing IRQs from DSDT as in The KiNG's post mentioned above, but the problem is still there.

However I have managed to fix "missing HDDs" issue by using AppleAHCIPort.kext from 10.8.4. It is now loading properly and all HDDs are mounted (Mavericks DP2). Of course this is not perfect solution and we'll need updated IOPCIFamily.kext that will work properly with Mavericks (I see that a lot of people are using IOPCIFamily.kext from Netkas in their ML installations).

Share this post


Link to post
Share on other sites

Same problem with my Dell optiplex 755 cpu core2 E8500 3.16ghz / 8gig of ram /  geforce gt 610 2gig  

this configuration works perfect on ML .

 

I try  to  using AppleAHCIPort.kext from 10.8.4. and no disk  appears ??

Share this post


Link to post
Share on other sites

Same problem with my Dell optiplex 755 cpu core2 E8500 3.16ghz / 8gig of ram /  geforce gt 610 2gig  

this configuration works perfect on ML .

 

I try  to  using AppleAHCIPort.kext from 10.8.4. and no disk  appears ??

Try using this combination of kexts (attached).

kexts.zip

Share this post


Link to post
Share on other sites

Strange, it should work. Have you installed kexts with Kexthelper (S/L/E)? What does it say in verbose mode (com.apple.driver.AHCIPort has failed to load ... or something)? Do you see the drives in safe mode? 


Share this post


Link to post
Share on other sites

Hi sampledi: :)  this is what append when I change the kext I used kexwizard to injected the 3 kext ;

everytime I try to change the kext on S/L/E  I recive this kernel panicoptipl10.jpg

Share this post


Link to post
Share on other sites

Hi,

 

I had the problem of missing SATA hard drives with 10.9 on a Dell Precision 690 which uses an ESB2 SATA controller.  This runs ML very well but on my initial installation attempt with 10.9 DP1 Disk Utility would see no SATA hard drives.  I did manage a successful installation of 10.9 DP1 onto  a USB HDD and also using the onboard LSI SATA/SAS chipset after modifying AppleLSIFusionMPT.kext.

 

Looking with IORegistryExplorer, AppleAHCIPort.kext would attach to the ESB2 SATA but never show any disks.

 

Upgrading to DP2 made no difference, and I spent a while adding "compatible" and "name" flags to the ESB2 SATA entry in my DSDT but to no effect.  Rolling back to the 10.8.4 AppleAHCIPort.kext also didn't help.

 

Upon upgrading to DP3 suddenly the ESB2 HDDs became visible exactly as in ML.  Thus I think that this is probably the consequence of a bug in DP1 and DP2 which Apple have fixed in DP3.

 

I would suggest that anyone with this problem installs on USB and upgrades to DP3 or beyond.  Their SATA drives should then appear and it should be possible to clone the 10.9 installation across.

 

Good Luck,

Share this post


Link to post
Share on other sites

 

 

Hi,

 

I had the problem of missing SATA hard drives with 10.9 on a Dell Precision 690 which uses an ESB2 SATA controller.  This runs ML very well but on my initial installation attempt with 10.9 DP1 Disk Utility would see no SATA hard drives.  I did manage a successful installation of 10.9 DP1 onto  a USB HDD and also using the onboard LSI SATA/SAS chipset after modifying AppleLSIFusionMPT.kext.

 

Looking with IORegistryExplorer, AppleAHCIPort.kext would attach to the ESB2 SATA but never show any disks.

 

Upgrading to DP2 made no difference, and I spent a while adding "compatible" and "name" flags to the ESB2 SATA entry in my DSDT but to no effect.  Rolling back to the 10.8.4 AppleAHCIPort.kext also didn't help.

 

Upon upgrading to DP3 suddenly the ESB2 HDDs became visible exactly as in ML.  Thus I think that this is probably the consequence of a bug in DP1 and DP2 which Apple have fixed in DP3.

 

I would suggest that anyone with this problem installs on USB and upgrades to DP3 or beyond.  Their SATA drives should then appear and it should be possible to clone the 10.9 installation across.

 

Good Luck,

thanks to respond :) I verifie inside the AppleAHCIPort.kext/info.plist (DP1,DP2 AND DP3) ;its a same for the chipset ICH, dont integrated  the ICH9RAHCI

only the ICH8MAHCI :(  :blush:

 

Have look 

 

 

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>BuildMachineOSBuild</key>
<string>13A509</string>
<key>CFBundleDevelopmentRegion</key>
<string>English</string>
<key>CFBundleExecutable</key>
<string>AppleAHCIPort</string>
<key>CFBundleGetInfoString</key>
<string>Version 2.8.5, Copyright 2005-2013, Apple Inc.</string>
<key>CFBundleIdentifier</key>
<string>com.apple.driver.AppleAHCIPort</string>
<key>CFBundleInfoDictionaryVersion</key>
<string>6.0</string>
<key>CFBundleName</key>
<string>AppleAHCI</string>
<key>CFBundlePackageType</key>
<string>KEXT</string>
<key>CFBundleShortVersionString</key>
<string>2.8.5</string>
<key>CFBundleSignature</key>
<string>????</string>
<key>CFBundleVersion</key>
<string>2.8.5</string>
<key>DTCompiler</key>
<string>com.apple.compilers.llvm.clang.1_0</string>
<key>DTPlatformBuild</key>
<string>5A11314p</string>
<key>DTPlatformVersion</key>
<string>GM</string>
<key>DTSDKBuild</key>
<string>13A509</string>
<key>DTSDKName</key>
<string></string>
<key>DTXcode</key>
<string>0500</string>
<key>DTXcodeBuild</key>
<string>5A11314p</string>
<key>IOKitPersonalities</key>
<dict>
<key>GenericAHCI</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.driver.AppleAHCIPort</string>
<key>Chipset Name</key>
<string>AHCI Controller</string>
<key>IOClass</key>
<string>AppleAHCI</string>
<key>IOPCIClassMatch</key>
<string>0x01060100&0xffffff00</string>
<key>IOPCIPauseCompatible</key>
<true/>
<key>IOPCITunnelCompatible</key>
<true/>
<key>IOProbeScore</key>
<integer>800</integer>
<key>IOProviderClass</key>
<string>IOPCIDevice</string>
<key>Vendor Name</key>
<string>Generic</string>
</dict>
<key>ICH10AHCI</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.driver.AppleAHCIPort</string>
<key>Chipset Name</key>
<string>ICH10 AHCI</string>
<key>IOClass</key>
<string>AppleAHCI</string>
<key>IOPCIPrimaryMatch</key>
<string>0x3a228086</string>
<key>IOProbeScore</key>
<integer>2000</integer>
<key>IOProviderClass</key>
<string>IOPCIDevice</string>
<key>Vendor Name</key>
<string>Intel</string>
</dict>
<key>ICH6 ESB2 AHCI</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.driver.AppleAHCIPort</string>
<key>Chipset Name</key>
<string>ESB2 AHCI</string>
<key>IOClass</key>
<string>AppleAHCI</string>
<key>IOPCIPrimaryMatch</key>
<string>0x26818086</string>
<key>IOProbeScore</key>
<integer>2000</integer>
<key>IOProviderClass</key>
<string>IOPCIDevice</string>
<key>Vendor Name</key>
<string>Intel</string>
</dict>
<key>ICH7MAHCI</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.driver.AppleAHCIPort</string>
<key>Chipset Name</key>
<string>ICH7-M AHCI</string>
<key>IOClass</key>
<string>AppleAHCI</string>
<key>IOPCIPrimaryMatch</key>
<string>0x27c58086</string>
<key>IOProbeScore</key>
<integer>2000</integer>
<key>IOProviderClass</key>
<string>IOPCIDevice</string>
<key>Vendor Name</key>
<string>Intel</string>
</dict>
<key>ICH8MAHCI</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.driver.AppleAHCIPort</string>
<key>Chipset Name</key>
<string>ICH8-M AHCI</string>
<key>IOClass</key>
<string>AppleICH8AHCI</string>
<key>IOPCIPrimaryMatch</key>
<string>0x28298086</string>
<key>IOProbeScore</key>
<integer>2000</integer>
<key>IOProviderClass</key>
<string>IOPCIDevice</string>
<key>Vendor Name</key>
<string>Intel</string>
</dict>
<key>Intel5SeriesAHCI</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.driver.AppleAHCIPort</string>
<key>Chipset Name</key>
<string>5 Series Chipset</string>
<key>IOClass</key>
<string>AppleIntelPchSeriesAHCI</string>
<key>IONameMatch</key>
<array>
<string>pci8086,3b29</string>
<string>pci8086,3b22</string>
<string>pci8086,3b2f</string>
</array>
<key>IOProbeScore</key>
<integer>2000</integer>
<key>IOProviderClass</key>
<string>IOPCIDevice</string>
<key>Vendor Name</key>
<string>Intel</string>
</dict>
<key>Intel6SeriesAHCI</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.driver.AppleAHCIPort</string>
<key>Chipset Name</key>
<string>6 Series Chipset</string>
<key>IOClass</key>
<string>AppleIntelPchSeriesAHCI</string>
<key>IONameMatch</key>
<array>
<string>pci8086,1c02</string>
<string>pci8086,1c03</string>
</array>
<key>IOProbeScore</key>
<integer>2000</integer>
<key>IOProviderClass</key>
<string>IOPCIDevice</string>
<key>Vendor Name</key>
<string>Intel</string>
</dict>
<key>Intel7SeriesAHCI</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.driver.AppleAHCIPort</string>
<key>Chipset Name</key>
<string>7 Series Chipset</string>
<key>IOClass</key>
<string>AppleIntelPchSeriesAHCI</string>
<key>IONameMatch</key>
<array>
<string>pci8086,1e02</string>
<string>pci8086,1e03</string>
</array>
<key>IOProbeScore</key>
<integer>2000</integer>
<key>IOProviderClass</key>
<string>IOPCIDevice</string>
<key>Vendor Name</key>
<string>Intel</string>
</dict>
<key>Intel8SeriesAHCI</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.driver.AppleAHCIPort</string>
<key>Chipset Name</key>
<string>8 Series Chipset</string>
<key>IOClass</key>
<string>AppleIntelPchSeriesAHCI</string>
<key>IONameMatch</key>
<array>
<string>pci8086,1d02</string>
<string>pci8086,9c03</string>
<string>pci8086,8c02</string>
<string>pci8086,8c03</string>
</array>
<key>IOProbeScore</key>
<integer>2000</integer>
<key>IOProviderClass</key>
<string>IOPCIDevice</string>
<key>Vendor Name</key>
<string>Intel</string>
</dict>
<key>MCP79AHCI</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.driver.AppleAHCIPort</string>
<key>Chipset Name</key>
<string>MCP79 AHCI</string>
<key>IOClass</key>
<string>AppleMCP79AHCI</string>
<key>IOPCIPrimaryMatch</key>
<string>0x0ab910de</string>
<key>IOProbeScore</key>
<integer>2000</integer>
<key>IOProviderClass</key>
<string>IOPCIDevice</string>
<key>Vendor Name</key>
<string>NVidia</string>
</dict>
<key>MCP89AHCI</key>
<dict>
<key>CFBundleIdentifier</key>
<string>com.apple.driver.AppleAHCIPort</string>
<key>Chipset Name</key>
<string>MCP89 AHCI</string>
<key>IOClass</key>
<string>AppleMCP89AHCI</string>
<key>IOPCIPrimaryMatch</key>
<string>0x0d8810de</string>
<key>IOProbeScore</key>
<integer>2000</integer>
<key>IOProviderClass</key>
<string>IOPCIDevice</string>
<key>Vendor Name</key>
<string>NVidia</string>
</dict>
</dict>
<key>OSBundleLibraries</key>
<dict>
<key>com.apple.iokit.IOAHCIFamily</key>
<string>1.0.0</string>
<key>com.apple.iokit.IOPCIFamily</key>
<string>1.0.0</string>
<key>com.apple.kpi.bsd</key>
<string>8.0.0</string>
<key>com.apple.kpi.iokit</key>
<string>8.0.0</string>
<key>com.apple.kpi.libkern</key>
<string>8.0.0</string>
<key>com.apple.kpi.mach</key>
<string>8.0.0</string>
</dict>
<key>OSBundleRequired</key>
<string>Local-Root</string>
</dict>
</plist>
 

and see on ML  about this mac 

 

 

212.png112.png
 

My question now is how to injected this chipset 

ICH9RAHCI :P  B)

 

Share this post


Link to post
Share on other sites

Shouldn't the Generic AHCI entry match on class code here?

 

System Profiler detail is often largely cosmetic, although there are SATA injector .kexts for specific chipsets.  In this same Dell Precision 690 I have a Marvell eSATA card which is normally picked up as GenericAHCI but I've injected correct details into a legacy .kext residing in /S/L/E:

 

<key>Marvell 88SE9123</key>
        <dict>
            <key>CFBundleIdentifier</key>
            <string>com.apple.driver.AppleAHCIPort</string>
            <key>Chipset Name</key>
            <string>88SE9123</string>
            <key>IOClass</key>
            <string>AppleAHCI</string>
            <key>IOPCIClassMatch</key>
            <string>0x01060100&0xffffff00</string>
            <key>IOPCIPrimaryMatch</key>
            <string>0x91231b4b</string>
            <key>IOProbeScore</key>
            <integer>15000</integer>
            <key>IOProviderClass</key>
            <string>IOPCIDevice</string>
            <key>Vendor Name</key>
            <string>Marvell</string>
        </dict>
 

I think I'm right in saying that the Info.plist in DP3 AppleAHCIPort.kext and that for DP2 and earlier are identical, however my suspicion is that the binaries may not be - unless the difference is somewhere else in the AHCI disk chain.

 

I no longer have DP2 or DP1 installed to diff and check.

Share this post


Link to post
Share on other sites

yes Iam verifie to my dp3 instalation  hp probook 4530s  and the AppleAHCIPort.kext its same on bolt 10.9  DP  ^_^ 


ok now Iam try to install on EXT hdd  and  after I update to DP 3  do you think when I am plug inside de Dell optiplex 755,  its work ???  :D  B)

Share this post


Link to post
Share on other sites

 

ok now Iam try to install on EXT hdd  and  after I update to DP 3  do you think when I am plug inside de Dell optiplex 755,  its work ???  :D  B)

 

It should do, at least if my experience is anything to go by.  Good Luck

Share this post


Link to post
Share on other sites

It should do, at least if my experience is anything to go by.  Good Luck

look a that  :thumbsup_anim:  :D  :P sans_t10.jpg

 

 

 

   

 I HAVE install the 10.8.4 kext  / IOPCIFamily.kext  / IOAHCIFamily.kext/ AppleAHCIPort.kext/ :thumbsup_anim:  :whistle:  :whistle:  :hysterical:  :yoji:  :moil:

for now AM ok with this 

 

thank you very mutch for your help  pharillion and sampledi :D  B)

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Alexandru
      Hello InsanelyMacForum,
       
      I managed to boot into Mac OS Sierra with my Intel Core 2 Duo, Nvidia 9400 GT and 4 GB of Ram machine, got internet and sound working, but the issue appears when I boot with Nvidia Web Driver. I get these acid colours, but Graphics Acceleration is working fine. I tried to inject EDID from my display, but no results as well. Would be really grateful if someone could provide some help. Thank you!

    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&amp;t=6771   Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Install Clover in USB stick UEFI mode https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace Folder CLOVER INSTALLATION.zip   --Install System and boot with USB STICK! --Install Clover in UEFI mode and replace with my folder  Mavericks / Yosemite CLOVER Mavericks-Yosemite.zip El Capitan / Sierra CLOVER El Capitan-Sierra.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches! If you need DSDT edit... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generate in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609    --DSDT My DSDT DSDT.Asus Z97M-PLUS.zip   Patches  -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -EHCx -DARWIN -LPC -XHCI -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -HDMI -ALS0 -SHUTDOWN -LAN -PNLF --SSDT Generate your SSDT Power Management, use ssdtPRGen Piker-Alpha https://github.com/Piker-Alpha run in terminal curl -o ~/ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/Beta/ssdtPRGen.sh chmod +x ~/ssdtPRGen.sh sudo ~/ssdtPRGen.sh ssdtPRGen.command.zip
       
      --SSDT i74790K
      SSDT.i7 4790K.zip
       
      --IOREG
      iMac.ioreg.zip
       
      Clear NVRAM, Purge and Kextcache Olarila.command.zip   stock coolerand Rio 40º    --FakeSMC http://www.hwsensors.com/releases --Audio http://www.insanelymac.com/forum/topic/314406-voodoohda-289/ --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
    • By chebkhaled1960
      Hello everyone 
      i noticed that when you install MacOS Mojave the format of HDD is converted to APFS automatically even if you formatted the HDD with HFS ! 
       
      My question is: i read that APFS is especially for SSD and not HDD, is APFS will damage my HDD or it’s Ok if I used it ?
       
      i need your helps and thank you .
    • By Angelo_
      I jusst bought a 500gb crucial mx500 to see wheter the slow response of my hackintosh was due to the old 2.5" 500gb wd black hdd that i savaged from a broken laptop at home to install osx the first time but i don't know how to transfer my datas, os, programs and bootloader on the new drive since crucial only shows how to clone the drive but doesn't (obiously) refer to the clover boot partition, how can i do that?
      and what filesystem should i use? apfs or hfs+?
      I can also use windows or linux programs since i'm on a triple boot setup
×