Jump to content
ryman

[Success] HP ProBook 4x30s 4x40s

144 posts in this topic

Recommended Posts

Not really.  The ProBook Installer is for Sandy/Ivy Bridge with Intel 6/7-series chipset HP ProBooks.  Your laptop is an HP, but that is where the similarities end.  Your laptop is gen1 Core i-series with 5-series chipset.

 

Probably your slowness is due to no QE/CI on graphics.  You might look at this thread for that: http://www.insanelymac.com/forum/topic/286092-guide-1st-generation-intel-hd-graphics-qeci/

Ok thanks, I know the thread of Intel HD 1st, and i can get QE/CI, but is not smooth how windows. Anyway, i use your kexts for touchpad and keyboard, and work very well, but i have problems with on/off led and brightness keys. Wifi led work (only at first boot is red), sound led work but when the sound is on the led became red and turn off after always 33 seconds. Brightness keys don't work, i have only one keys (pause keys) for increase brightness. It's possibile to adjust this things?

Share this post


Link to post
Share on other sites
Advertisement

Actually, it sleeps the laptop, just like the power button does on my Apple MacBookAir6,2 :-)

Ctrl+Power will bring up the menu (with a bonk).  And surprising... Fn+Power will just sleep the display.

Ctrl+power did it, but if i press only the "power" it turn the display off (instead of sleeping the whole computer). Didn't knew how it works on real macs. :P

 

Also, with the files provided, when booting the Install USB key, there's a gray screen in some cases. To bypass that just close the screen and open it again.

Share this post


Link to post
Share on other sites

Ctrl+power did it, but if i press only the "power" it turn the display off (instead of sleeping the whole computer). Didn't knew how it works on real macs. :P

 

Also, with the files provided, when booting the Install USB key, there's a gray screen in some cases. To bypass that just close the screen and open it again.

On my 4530s, power alone sleeps the computer...

 

BTW, this behavior (sleep with power button, no menu) is new behavior with 10.9.  My MBA with ML 10.8.5 displays the menu.  Apple obviously intended to make this change.  I think most people will prefer the old way and will not be happy with this change.

Share this post


Link to post
Share on other sites

On my 4530s, power alone sleeps the computer...

 

BTW, this behavior (sleep with power button, no menu) is new behavior with 10.9.  My MBA with ML 10.8.5 displays the menu.  Apple obviously intended to make this change.  I think most people will prefer the old way and will not be happy with this change.

Oh, my mistake. It did sleep now, but I forgot to change the sleep method to RAM, giving me a KP (sometimes). Here's the image http://d.pr/i/S8Yz

Share this post


Link to post
Share on other sites

Installed 10.9 GM and Probook Installer 6.1.6 on my 4530s. Everything works great! Thanks for help!

 

FYI:

10.9 GM and Probook Installer 6.1.6 works great on my wifes ProBook 6460b to:) Just had to install "VoodooHDA 0.2.7.3" for sound, and "hnak´s AppleIntelE1000e" for ethernet.

 

 

 

HP ProBook 4530s, HD 1920x1080 | F.40 | i7 2720qm (2.2 GHz) | 16 GB RAM DDR3 1600 MHz | Intel HD 3000 Graphics | OSX 10.9 and Windows 8 | Geekbench 64bit 10031
HP ProBook 6460b, HD 1366x768 | F.20 | i5 2410m (2.3 GHz) | Intel HD 3000 Graphics | OSX 10.9 | Geekbench 64bit 6034

Share this post


Link to post
Share on other sites

Ok, I got it working mostly, finally after like 10 hours.... On my 6470b, Sleep, Audio, and mostly everything works but i still cant get my Intel HD 4000 working..... used a the kext from here, http://www.osx86.net/files/download/3568-new-109-intel-hd-3000-hd-4000-driver/

 

It recognizes that its an HD4000 with 1024mb of VRAM, but its clearly not working as all videos are VERY jotty, Launchpad is horrible, and its laggy all around with graphics.... any clue how to fix it please?

Share this post


Link to post
Share on other sites

installed gm on 4340 but cant login to apple id ..an error has occured

please help

 

edited: Solved...

Share this post


Link to post
Share on other sites

yes intaller 6.1.6works great on my hp probook 4530S version the only thing that i had to fix is the darnnn Boot0 error other than that works like a charm

Thanks PETE looking forward for your next update  :thumbsup_anim:

Share this post


Link to post
Share on other sites

Hi RehabMan,

I need you're help, I can only start with -x flag in my hp5330m here is a part of the log

 

Oct  8 01:01:27 localhost kernel[0]: Kext com.apple.driver.AppleIntelHD3000Graphics - library kext com.apple.iokit.IOGraphicsFamily not found.Apple16X50PCI22: Identified 1 Serial channels at PCI Bus=0 Dev=22 Func=3
Oct  8 01:01:27 localhost kernel[0]: Can't load kext com.apple.driver.AppleIntelHD3000Graphics - failed to resolve library dependencies.Apple16X50UARTSync22: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200
Oct  8 01:01:27 localhost kernel[0]: Kext com.apple.driver.AppleIntelHD3000Graphics failed to load (0xdc00800e).
Oct  8 01:01:27 localhost kernel[0]: Failed to load kext com.apple.driver.AppleIntelHD3000Graphics (error 0xdc00800e).
Oct  8 01:01:27 localhost kernel[0]: Kext com.apple.driver.AppleHDAController - library kext com.apple.iokit.IOGraphicsFamily not found.Couldn't alloc class "Gen6Accelerator"
Oct  8 01:01:27 localhost kernel[0]: Can't load kext com.apple.driver.AppleHDAController - failed to resolve library dependencies.
Oct  8 01:01:27 localhost kernel[0]: Kext com.apple.driver.AppleHDAController failed to load (0xdc00800e).
Oct  8 01:01:27 localhost kernel[0]: Failed to load kext com.apple.driver.AppleHDAController (error 0xdc00800e).
Oct  8 01:01:27 localhost kernel[0]: Couldn't alloc class "AppleHDAController"
 

And I post my DSDT to.

Thank you Rehab, best regards.

 

Last think if you have time, I can't use your last vodoops2 kext, it's not working ?

 

 

DSDTAvecARPTBiosF29+LAN+Whitelist+Disabler10.8.5 Patch.dsl.zip

Share this post


Link to post
Share on other sites

Hi RehabMan,

I need you're help, I can only start with -x flag in my hp5330m here is a part of the log

 

Oct  8 01:01:27 localhost kernel[0]: Kext com.apple.driver.AppleIntelHD3000Graphics - library kext com.apple.iokit.IOGraphicsFamily not found.Apple16X50PCI22: Identified 1 Serial channels at PCI Bus=0 Dev=22 Func=3

Oct  8 01:01:27 localhost kernel[0]: Can't load kext com.apple.driver.AppleIntelHD3000Graphics - failed to resolve library dependencies.Apple16X50UARTSync22: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200

Oct  8 01:01:27 localhost kernel[0]: Kext com.apple.driver.AppleIntelHD3000Graphics failed to load (0xdc00800e).

Oct  8 01:01:27 localhost kernel[0]: Failed to load kext com.apple.driver.AppleIntelHD3000Graphics (error 0xdc00800e).

Oct  8 01:01:27 localhost kernel[0]: Kext com.apple.driver.AppleHDAController - library kext com.apple.iokit.IOGraphicsFamily not found.Couldn't alloc class "Gen6Accelerator"

Oct  8 01:01:27 localhost kernel[0]: Can't load kext com.apple.driver.AppleHDAController - failed to resolve library dependencies.

Oct  8 01:01:27 localhost kernel[0]: Kext com.apple.driver.AppleHDAController failed to load (0xdc00800e).

Oct  8 01:01:27 localhost kernel[0]: Failed to load kext com.apple.driver.AppleHDAController (error 0xdc00800e).

Oct  8 01:01:27 localhost kernel[0]: Couldn't alloc class "AppleHDAController"

 

And I post my DSDT to.

Thank you Rehab, best regards.

 

Last think if you have time, I can't use your last vodoops2 kext, it's not working ?

Your graphics kexts are failing to load.  Are you sure you're using a genuine download from Apple? (eg. are you are registered/paid Apple developer?).  Latest VoodooPS2 kext is working just fine here.

Share this post


Link to post
Share on other sites

Installed 10.9 GM and Probook Installer 6.1.6 on my 4530s. Everything works great! Thanks for help!

 

FYI:

10.9 GM and Probook Installer 6.1.6 works great on my wifes ProBook 6460b to:) Just had to install "VoodooHDA 0.2.7.3" for sound, and "hnak´s AppleIntelE1000e" for ethernet.

 

 

 

HP ProBook 4530s, HD 1920x1080 | F.40 | i7 2720qm (2.2 GHz) | 16 GB RAM DDR3 1600 MHz | Intel HD 3000 Graphics | OSX 10.9 and Windows 8 | Geekbench 64bit 10031

HP ProBook 6460b, HD 1366x768 | F.20 | i5 2410m (2.3 GHz) | Intel HD 3000 Graphics | OSX 10.9 | Geekbench 64bit 6034

Just a note for your HP Probook 6460b, what wifi card are you using?

Share this post


Link to post
Share on other sites

Brilliant work guys :)

 

I'm normally on "that other forum", but I've just installed Mavericks GM on my desktop and it's now working like a charm so my 4340s will be getting the same treatment shortly!

 

It's great to hear that the latest PBI *unofficially* supports 10.9, having an Ivy-Bridge system I hope to give you some feedback soon

 

Regards,

Craig

Share this post


Link to post
Share on other sites

Unfortunately you will have to wait for the manufacture of your dongle to update the drivers since is not native out of the box i could only suspect that but i could be wrong wish you it gets resolved ?✌

Share this post


Link to post
Share on other sites

"Just a note for your HP Probook 6460b, what wifi card are you using?"

 

I'm using dlink dwa-121 usb dongle for wifi

What's your internal Wifi card then? Is it Broadcom 43224 abg?

Share this post


Link to post
Share on other sites

This is my first post here.  Really appreciate everyone's hard work.  Running 10.8.5 and 10.9 GM both on a triple boot 4530s and both have the same very minor issue with the built in HD webcam in FaceTime and Photo Booth.   I'm curious if anyone might know of a fix for the choppy pixelated video?  Works fine in other apps.  I know of the workaround found elsewhere using camwiz opened after either of the before mentioned, I'm using automator to open FaceTime or Photo Booth, followed by a pause then opening the camwiz free app and then shutting down camwiz and automator.  Wondering if there may be a real fix, if not, no big deal.  Again, thanks!

Share this post


Link to post
Share on other sites

Hello,

 

My main problems right now are:

 

graphic glitches on launchpad/safari

 

 

Any suggestions to fix this?

 

 

And that´s right: dwa-125 wifi dongle is working with Snow Leopard drivers (version from 2011)

Share this post


Link to post
Share on other sites

What are the normal temps on a HP Probook running mavericks? I just want to know as a reference point because my dv6 always runs above 55 degrees celsius. Just needed to know in case this is not normal behaviour.

Share this post


Link to post
Share on other sites

Mine is running around 46

 

USB is driving me mad...only one port works (of 4), when i boot from hd, but if i boot from installer usb pen, all ports work...ideas?

 

Edit: problem solved by patching my dsdt manually

Share this post


Link to post
Share on other sites

Mine is running around 46

 

USB is driving me mad...only one port works (of 4), when i boot from hd, but if i boot from installer usb pen, all ports work...ideas?

 

Edit: problem solved by patching my dsdt manually

 

Same for me, my USB ids are exactly the same as the HP Probook 4530 (i3 2310m model). DSDT patch from Rehabman worked for me. The only difference I have is that I have to add PNLF twice ...once in Scope _SB and once in .\_SB or else brightness sliders won't work.

 

My attached screenshot of temps.....always above 50 degrees celsius. Ambient temps at my place around 30 degrees.

post-453724-0-86520700-1381474713_thumb.png

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By chebkhaled1960
      I just installed the latest final version of macos Mojave on my HP Z420 and all seems ok,
      just I have a problem of shutting down, when I click shutdown the pc restart.
       
      THIS IS MY EFI FOLDER
       
      EFI
       
      MY PC CONFIG:
       
      HP Z420 WORKSTATION
      Intel Patsburg C600/X79, Intel Sandy Bridge-EP
      QUAD CORE INTEL XEON E5-1620 03.60 GHz
      RAM: 22 GB ECC RDDR3
      GPU: 2GB NVIDIA GTX 730


      Thank you all
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&t=6771   Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Install Clover in USB stick UEFI mode https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace Folder CLOVER INSTALLATION.zip   --Install System and boot with USB STICK! --Install Clover in UEFI mode and replace with my folder  Mavericks / Yosemite CLOVER Mavericks-Yosemite.zip El Capitan / Sierra CLOVER El Capitan-Sierra.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! I prefer DSDT way, apply all patches in one file, many people prefer many SSDTs or Clover patches! If you need DSDT edit... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generate in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609    --DSDT My DSDT DSDT.Asus Z97M-PLUS.zip   Patches  -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -EHCx -DARWIN -LPC -XHCI -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -HDMI -ALS0 -SHUTDOWN -LAN -PNLF --SSDT Generate your SSDT Power Management, use ssdtPRGen Piker-Alpha https://github.com/Piker-Alpha run in terminal curl -o ~/ssdtPRGen.sh https://raw.githubusercontent.com/Piker-Alpha/ssdtPRGen.sh/Beta/ssdtPRGen.sh chmod +x ~/ssdtPRGen.sh sudo ~/ssdtPRGen.sh ssdtPRGen.command.zip
       
      --SSDT i74790K
      SSDT.i7 4790K.zip
       
      --IOREG
      iMac.ioreg.zip
       
      Clear NVRAM, Purge and Kextcache Olarila.command.zip   stock coolerand Rio 40º    --FakeSMC http://www.hwsensors.com/releases --Audio http://www.insanelymac.com/forum/topic/314406-voodoohda-289/ --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/304235-intelmausiethernetkext-for-intel-onboard-lan/   Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
    • By Donw35
      I have a HP 840 G3 that was donated to me to Hackintosh, currently running High Sierra 10.13.6. This should work for the 840 G2 and you may even have more luck with the 840 G1 with the WiFi that PCIe.
       
      My method to install OS X on the SSD from a working real Mac via SSD to USB converter. I then install Clover and add my kexts ad set the config.plist
       
      Not working
      SD Card reader
       
      Working
      Video - screen looks better in OS X then it does in Windows 10
      VGA port
      WiFi and BlueTooth working OOO using the below hack
      Battery status with Rehabman's DSDT patch
      Brightness controls
      Sounds - using VoodooHDA
      Microphone - cannot turn it off or mute
      Keyboard backlight - controlled though BIOS anyways
      touchpad - using VoodooPS2Controller
      USB3 - this laptop has two on board only and I haven't test them using the docking station
      USB3.1 C
      Ethernet - using IntelMausiEthernet
      Sleep - kind of, closing the lid doesn't go to sleep but goes to sleep over time.
       
      Not tested
      This laptop does not have a Webcam - enterprise model.
      Display port
      Finger Print device
       
      For me what keeps this from being a day to day usable laptop (Mac Book) is the WiFi + Bluetooth, not having battery percentage could be an issue later though.
       
      Clover_folder for those that want to play along.
       
       

      HP_840_G3_Clover.zip
×