Jump to content

[GUIDE] Mountain Lion Neo Performer 6162


Fragrance89
 Share

1 post in this topic

Recommended Posts

Hello, guys!

 

This will be a full tutorial about the installation process and its compatibility with all the hardware components.

Here it is:

 

PC Name: Neo Performer 6162

CPU:

Name: Intel Celeron Ivy Bridge G1610

Cores: 2

Threads: 2

Clock Speed: 2.59GHZ

Level 3 Cache: 2MB

Bus Speed: 1333MHZ

Motherboard:

Name: BIOSTAR Intel H61MLV2

GPU:

Name: Palit Nvidia GeForce GT610

Memory amount: 2048MB

Memory Type: DDR3

Memory:

Name: A- Data

Memory Type: DDR3

Memory amount: 8GB [2x 4GB]

Speed: 1333MHZ

Audio Controller:

Name: HDA VIA VT1708S 6:1

Hard Drive:

Name: Seagate Momentus

Rotation speed: 7200

Capacity: 500GB

Ethernet:

Name: Qualcomm Atheros AR8152 v2.0 Fast Ethernet

 

So, these are my PC specifications. If you are interested in getting more detailed information about any of these components, do not hesitate to send me PM with your question.

 

Installation

 

Steps:

1. BIOS Setting: Change HDD mode from IDE to ACHI

2. Download Chameleon Bootloader 2.1 here

3. Extract the archive. You will found an ISO image of the bootloader

4. In my case, I burned it on a blank CD- this works 100% everytime instead the USB method

5. Download iAtkos ML2

6. Download TransMac tmsetup.exe

7. Burn the iAtkos image on a DVD or restore it on an USB Drive

8. Boot from the CD and select iAtkos ML2 source

9. I didn't use any boot flags

10. Actually, everything works OOB except the HDA Audio Controller

11. After formatting the HDD, a window with the installation options will appear.

-DESELECT the bootflag "GraphicsEnabler=Yes", the Nvidia Card is fully recognized

-DESELECT Audio drivers (both Apple and Voodoo)

-SELECT Atheros AR8152 driver under the Network section

Screenshots:

 

Info1.tiff

Info2.tiff

Info3.tiff

Info4.tiff

Info5.tiff

Info6.tiff

Info1.tiff

Info2.tiff

Info3.tiff

Info4.tiff

Info5.tiff

Info6.tiff

Link to comment
Share on other sites

 Share

×
×
  • Create New...