Jump to content

4 posts in this topic

Recommended Posts

Hi - been working on getting an upgrade together for my current workstation. Not having a huge budget and needing as much bang for buck I want to keep as much as possible and replace as little as possible (red goes, green stays):

 

Asus P5Q Pro Intel P45 (Socket 775) PCI-Express DDR2 Motherboard

Intel Core 2 Quad Q9550 LGA775 'Yorkfield' 2.83GHz 12MB-cache (1333FSB) Processor

OCZ 4GB (2x2GB) PC2-8500C5 1066MHz Dual Channel Platinum Series DDR2

NVidia GeForce 8800 GTX

Samsung 830 128 GB SSD

Western Digital VelociRaptor 300GB 10000RPM SATA-II 16MB Cache - OEM

2 - Western Digital Caviar Green WD20EARS 2TB

2 - Western Digital Caviar Black 1TB SATA-II

Lian-Li PC-B25B Aluminium Midi-Tower - Black (No PSU)

Thermalright Ultra-120 Extreme CPU Cooler (Socket AM2/LGA775)

Samsung SH-S223F/BEBE 22x DVDąRW SATA Dual Layer ReWriter (Black) - OEM

Noctua NF-S12 800RPM 120mm Silent Case Fan - 3 Pin

Hiper 630W HPU-4M630 SLi Certified PSU

 

The new hardware that I am so far gravitating towards is as follows:

Supermicro X9SRA

Intel Xeon Processor E5-2620

2 x Kingston ValueRAM - ECC Memory - 16 GB - DIMM

AMD FirePro V4900 Professional Graphics

Supermicro SNK-P0050AP4 - Cooler

I would use a number of VM's for development purposes (using RHEL, Windows Server for work) and then ML as my everyday machine (photo editing with Aperture, web surfing, a little video editing).

 

With little experience on the VMware ESX side any feedback would be most appreciated; specifically around how to get sound the ALC889 working in ML - would it be possible to do iopath/passthrough with sound ?

 

I have seen evidence of the V4900 GPU working being passed through to VM from ESX here:

https://docs.google....d1alRUTlE#gid=0

and working in ML here:

http://www.insanelym...00#entry1897975

 

Finally wireless; I am currently using a Linksys WMP300N - would passthrough be possible here. I suspect not from what I have read plus only two passthroughs are allowed per VM. Otherwise I would be going with this a WUMC710.

 

Advice would be most appreciated.

Share this post


Link to post
Share on other sites
Advertisement

As exciting as it might be (or was in my case...), it is way easier to just have native OSX & not bother with virtualizing it

 

Any specific reason you want/need to have ESXi in the way? - especially that you are aiming for only 16 GB

Share this post


Link to post
Share on other sites

Thanks sebus.. I was aiming at actually 2 x 16 GB with a view to getting some more if needed and breaking the cost as well. But as you say it really needed ?

 

I would probably be keeping a native OS X partition as it is any way and having a dual boot (via boot bios option).

 

But the only real reason are is that I can and secondly to learn some more about this virtualisation technology...

 

The downsides I can see with such a setup is not being able to put the whole system in to standby (sleep) but tell me what other pains did you encounter ?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Kaku
      Greetings!
       
      So I managed to get a Catalina 10.15 vm up and running in ESXi 6.7u2.
      When I try to install Catalina updates, however, it goes to the Apple logo, status bar moving ever so slightly, reboots again and this time hangs on the Apple logo.  To fix this, I either remove or disable "Mac OS" as an option in the bootloader. Is there a way to get these updates to install? 
       
      In the meantime...
       
      I instead of restarting Catalina after choosing to update it, I shutdown the guest.  After a restart it SEEMED to update with the time duration countdown.
       
      Prior to this I did run disk utility and checked Untitled and Untitled-Data for errors (I don't think it found any).
       
      So I just logged back onto the VM and the version is still 10.15 and NOT 10.15.2 as hoped. So weird.
       
      Any ideas?
       
    • By fusion71au
      Run Vanilla OS X El Capitan, Sierra, High Sierra or Mojave in VirtualBox 5.x.x on a Windows Host
      Following on from my previous guide on how to create a VMware virtual machine running Vanilla OS X El Capitan in Windows, I’ve decided to write a similar guide for creating a VirtualBox El Capitan VM. 
       
      The virtual machine should be useful for testing El Capitan and also for creating installers for use on a real machine/hackintosh.
       
      There are other tutorials and videos on the net about running OS X on Windows machines using pre-made VMDK disk images but you can never guarantee what else is in there….
       
      I’ve gathered info for this guide from several threads in the Multibooting and Virtualisation section of this forum and also the wider internet eg
       
      @colt2 HOW TO: Create a bootable El Capitan ISO for VMware
      @dsmccombs comment on faking Ivybridge Processor
      @E:V:A http://forum.xda-developers.com/showpost.php?p=55572430&postcount=6
      @Tech Reviews video tutorial https://www.youtube.com/watch?v=t7X07U63lwg.
      VirtualBox Forum: Status of OSX on OSX
       
      Requirements
         Intel PC with four or more CPU cores running Windows 7 X64 or later OS (2 or more cores needed for OS X)    4GB or more RAM (2GB or more will be needed for OS X)    Hard Disk with at least 40GB free for Virtual Machine    Oracle VM VirtualBox v 5.0.34    Install OS X El Capitan app and Mac or Hack to prepare installation iso <-- Now, no longer necessary to have previous access to a Mac or Hack by building the Installer.app from scratch - see post#75    16GB or larger exFAT formatted USB stick to transfer El Capitan iso from Mac/Hack to Host PC  
      Prepare Installation ISO on your Mac or Hack
      1.  On your Mac or Hack, download "Install OS X El Capitan.app" from the App Store into your Applications folder.
      2.  Download and unzip the CECI.tool (attached to this post) into your ~/Downloads folder. The commands in this executable script are shown below for informational purposes.  Note: you will need approx 16GB of free space on your hard disk for the script to complete.
       
       
       
      3.  Open OS X terminal, then run the following commands to execute the script:
      cd downloads chmod +x CECI.tool ./CECI.tool 4.  At the end of the process, you will have an El Capitan iso on your desktop - copy this onto an exFAT formatted USB for use on the PC Host later.
       
       
      Create an El Capitan Virtual Machine in VirtualBox
      1.  Open the VirtualBox program and click the "New" button to create a new VM.
       

       
      2.  Select Mac OS X and Mac OS X 10.11 El Capitan (64 -bit) for Operating System type and version.  I named my Virtual Machine "El_Capitan", then clicked next...
       

       
      3.  Leave the Memory size at the recommended 2048 MB, then click next.
       

       
      4.  Choose to "Create a virtual hard disk now", then click the create button.
       

       
      5.  For the hard disk file type, the default is VDI (VirtualBox Disk Image) but I have selected VMDK for inter-operability with VMWare.  Click next...
       

       
      6.  For Storage on physical hard disk, I have chosen the default Dynamically allocated (grows larger to a set limit as you need more disk space).
       

       
      7.  On the File location and size screen, you can set the location of the new virtual hard disk and its size - I recommend changing disk size to 40GB or larger.  When you click the create button, you will now see your new VM in the VirtualBox main GUI.
       

       
      8.  Click the settings button on the Main Menu to tweak a few settings....
         a.  On the System/Motherboard tab in Boot Order, you can uncheck the Floppy Drive (who has these now?)
       

       
         b.  On the System/Processor tab, you can increase the allocated CPU cores to 2
       

       
         c.  On the Display tab, you can increase the allocated Video Memory to 128MB
       

       
         d.  On the Storage tab, click on the icon of the Optical Drive and select "Choose Virtual Optical Disk File". 
       

       
      Navigate and select the El Capitan ISO we created earlier...
       

       
         e.  Click the OK button to finalise the VM settings.
       
       
      Patch El Capitan vbox configuration file with DMI Settings from a Mac
      1.  From the start menu, type cmd and click run as administrator to open an administrative command prompt. 
       

       
      2.  Choose a Mac Model similar to your host system, then type the following lines, followed by <enter>  after each line.  Make sure you first close all VirtualBox Windows and the VirtualBox program, otherwise any changes you make won't stick...
       
      Eg iMac11,3
      cd "C:\Program Files\Oracle\VirtualBox\" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemProduct" "iMac11,3" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemVersion" "1.0" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBoardProduct" "Mac-F2238BAE" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/DeviceKey" "ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 1 MacBookPro11,3
      cd "C:\Program Files\Oracle\VirtualBox\" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemProduct" "MacBookPro11,3" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemVersion" "1.0" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBoardProduct" "Mac-2BD1B31983FE1663" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/DeviceKey" "ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 1 Macmini6,2
      cd "C:\Program Files\Oracle\VirtualBox\" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemProduct" "Macmini6,2" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemVersion" "1.0" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBoardProduct" "Mac-F65AE981FFA204ED" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/DeviceKey" "ourhardworkbythesewordsguardedpleasedontsteal(c)AppleComputerInc" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/smc/0/Config/GetKeyFromRealSMC" 1 3.  Optional- For some host systems eg those with Haswell and newer CPUs, you might have to spoof an older CPU to avoid VirtualBox errors.  You can try from one of the following if this happens:

      To spoof Lynnfield i5 750 CPU
      VBoxManage.exe modifyvm "El_Capitan" --cpuidset 00000001 000106e5 06100800 0098e3fd bfebfbff To spoof IvyBridge CPU
      VBoxManage.exe modifyvm "El_Capitan" --cpuidset 00000001 000306a9 04100800 7fbae3ff bfebfbff or
      VBoxManage.exe modifyvm "El_Capitan" --cpuidset 00000001 000306a9 00020800 80000201 178bfbff 4.  Close the command prompt window.
       
       
      Installation of El Capitan
      We are now ready to start the El_Capitan Virtual Machine....
       



       
      Installation should be relatively straight forward, just following the prompts of the OS X installer:
      1.  Select language, agree to legal terms
       

       
      2.  Use Disk Utility from the Utilities Menu to erase and format the virtual hard drive as a single partition GUID Mac OS X Extended.  I named my drive "Macintosh HD" but you can enter whatever you like eg El_Capitan.
       

       
      3.  Quit DU and choose Macintosh HD to install El Capitan on.
      4.  After 20-30 min (depending on how fast your system is), the installation will complete.  At this point, unmount the El Capitan ISO by clicking the Devices menu from the VM window, click Optical Drives, then choose Remove disk from virtual drive.  The VM is now ready to reboot into OS X from the virtual hard drive.
      5.  At the welcome screen, choose your country and keyboard layout.  You can skip transfer information, location services and logging in with your Apple ID if you wish…
      6.  Create a User Account and select your Time Zone.  You can skip sending diagnostics and usage data to Apple….
      7.  Finally, you will arrive at the El Capitan Desktop.
       

       
      8.  Network/internet and audio should work OOB but on my system, the sounds were distorted.  Unfortunately, there is no QE/CI and the VM resolution will be fixed without the ability to dynamically resize the VM window (no VirtualBox additions for OS X guests atm). 
       
       
      Customization with VBoxManage
      1.  You can change the default resolution of 1024*768 (after shutting down the VM) with the VBoxManage command from the Windows Administrative Command Prompt:
      cd "C:\Program Files\Oracle\VirtualBox\" VBoxManage setextradata "El_Capitan" VBoxInternal2/EfiGopMode N (Where N can be one of 0,1,2,3,4,5) referring to the 640x480, 800x600, 1024x768, 1280x1024, 1440x900, 1920x1200 screen resolution respectively.
       
      Update:  For VirtualBox 5.2.x, the command for changing screen resolution has changed...
       
      VBoxManage setextradata "<MyVM>" VBoxInternal2/EfiGraphicsResolution XxY (where X=Horizontal screen resolution, Y=Vertical screen resolution)
      eg
      VBoxManage setextradata "<MyVM>" VBoxInternal2/EfiGraphicsResolution 1280x1024 2.  Adding serials and other SMBIOS details for the System Information Screen
      VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemSerial" "W8#######B6" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBoardSerial" "W8#########1A" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemVendor" "Apple Inc." VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiSystemFamily" "iMac" VBoxManage setextradata "El_Capitan" "VBoxInternal/Devices/efi/0/Config/DmiBIOSVersion" "IM112.0057.03B" A listing of known issues with Mac OS X guests can be found in the VirtualBox Manual - link https://www.virtualbox.org/manual/ch14.html.
       
      Vanilla Mavericks and Yosemite, Snow Leopard from Retail DVD
      The same VM settings for El Capitan will also boot and run vanilla installations of OS X Mavericks and Yosemite .  Attached to this post are installer scripts to create bootable Mavericks (CMI.tool) and Yosemite (CYI.tool) ISOs for VirtualBox and VMware.
       
      With the respective OS X installer apps in the Applications folder, download and run the installer tools using terminal ie
       
      To create a Mavericks ISO on your desktop
      cd downloads chmod +x CMI.tool ./CMI.tool To create a Yosemite ISO on your desktop
      cd downloads chmod +x CYI.tool ./CYI.tool Here is a screenshot of the VM running Mavericks 10.9.5...
       

       
      Finally, those without a Mac/Hack to prepare the install media can purchase a retail Snow Leopard DVD directly from Apple and install OSX 10.6.3 on their virtual machines (Snow Leopard, Lion and Mountain Lion run quite happily in VirtualBox with 1 CPU, 1-2 GB of RAM and the rest of the settings unchanged from above).  Once you update by combo update to SL 10.6.8, you can directly download El Capitan from the App Store for free .
       

       
      UPDATE macOS Sierra 10.12 to 10.12.6: For macOS Sierra, use CSI.tool in post#51.
      UPDATE macOS High Sierra 17A365:  For macOS High Sierra, use CHSI.tool in post#73.
      UPDATE macOS Mojave 18A391:  For macOS Mojave or High Sierra, use macOS_iso_creator.tool on page 4 of thread.
      UPDATE macOS Catalina Beta DP3_19A501i:  For Catalina, @jpz4085 has made an automated batch file to create a Catalina VM in Windows with iMac 14,2 SMBIOS.  You can still use my macOS_iso_creator.tool on page 5 to make an installer ISO to attach to the VM.
       
       
       
      Good luck and enjoy
      CECI.tool.zip
      CYI.tool.zip
      CMI.tool.zip
    • By fusion71au
      Run Vanilla OS X El Capitan, Sierra, High Sierra or Mojave in VMware Workstation on a Windows Host
       
      I wanted to make a simple guide on how to create a vanilla OS X El Capitan virtual machine running on a Windows host.  The virtual machine should be useful for testing El Capitan and also for creating installers for use on a real machine/hackintosh.
       
      There are many guides and videos on the net about running OS X on Windows machines using pre-made VMWare disk images but you can never guarantee what else is in there….
       
      I’ve gathered info for this guide from various threads in the Multibooting and Virtualisation section of this forum eg
       
      Workstation 11/12, Player 7/12, Fusion 7/8 and ESXi 6 Mac OS X Unlocker 2 by @Donk How to Install OS X 10.x from Snow Leopard to El Capitan in VMware Workstation 10/12, Player 6/8 or ESXi 5/6 by @MSOK HOW TO: Create a bootable El Capitan ISO for VMware Credit and thanks to @Donk, @Albert Nietsnie and @MSOK for all their hard work in creating and testing the VMware Unlocker program.
       
      Requirements
      Intel PC with four or more CPU cores running Windows 7 X64 or later OS (2 or more cores needed for OS X) 4GB or more RAM (2GB or more will be needed for OS X) Hard Disk with at least 40GB free for Virtual Machine VMware Workstation 12 or later VMware Unlocker 2.0.7 or later Install OS X El Capitan app and Mac or Hack to prepare installation iso <-- Now, no longer necessary to have previous access to a Mac or Hack by building the Installer.app from scratch - see post#41 16GB or larger exFAT formatted USB stick to transfer El Capitan iso from Mac/Hack to Host PC Prepare Installation ISO on your Mac or Hack
      1.  On your Mac or Hack, download "Install OS X El Capitan.app" from the App Store into your Applications folder.
      2.  Unmount any attached install image/InstallESD.dmg (if currently mounted) by rebooting the system or running the hdiutil unmount command in terminal eg
       
      3.  Download and unzip the CECI.tool (attached to this post) into your ~/Downloads folder. The commands in this executable script are shown below for informational purposes….
       
       
       
      4.  Open OS X terminal, then run the following commands to execute the script:
      cd downloads chmod +x CECI.tool ./CECI.tool 5.  At the end of the process, you will have an El Capitan iso on your desktop - copy this onto an exFAT formatted USB for use on the PC Host later.
       
      Updates:
      @shela has created an ISO generating script compatible with OS X 10.6-10.12: create_osx_iso post #362.
      See post#30 for macOS_iso_cim.tool script to create ISO for macOS 10.13+ using Apple's createinstallmedia utility.
       
      Install and Patch VMware Workstation 12 on your PC
      1.  Download and install VMWare Workstation Player 12 or later
      2.  Download and extract Unlocker 2.0.7 or later to your USB stick…
      3.  Run the win-install.cmd as administrator by right clicking the file in Windows explorer or run it from an Administrative Command Prompt.
       



       
      Create an El Capitan Virtual Machine
      1.  Double click on the VMware Workstation 12 Player icon on your desktop and click “Create a New Virtual Machine”.  Choose “I will install the operating system later” at the How will you install screen….
       

      2.  Select Apple Mac OS X as the Guest operating system and OS X 10.11 as the version.  By default, an OS X 10.11 folder will be created in your Documents\Virtual Machines folder.
       


      3.  Under Specify Disk Capacity, you can leave the default 40GB or set a larger value.  I personally store the virtual disk as a single file.  Click Finish and you will see OS X 10.11 on the Main Screen of Workstation 12.
       


      4.  Next, we need to edit the virtual machine settings to map the virtual SATA CD/DVD drive to the El Capitan installation iso we created earlier.
       


       
      5.  To prevent the virtual machine from crashing in Windows, the virtualHW.version set in the vmx configuration file needs to be changed from 12 to 10 (alternatively, the line smc.version = "0" can be added to the file).  The OS X 10.11.vmx file can be edited with the WordPad program (navigate to the OS X 10.11 virtual machine folder with Windows Explorer and right click on the file to open in WordPad).
       


       
      6.  For HW10, set USB compatibility to USB 2.0, otherwise your mouse and keyboard might not work in the virtual machine.
       

      7.  Finally click “Play virtual machine”
       

      Installation of El Capitan
      Installation should be relatively straight forward, just following the prompts of the OS X installer:
      1.  Select language, agree to legal terms
       

      2.  Use Disk Utility from the Utilities Menu to erase and format the virtual hard drive as a single partition GUID Mac OS X Extended.  I’ve named the drive Macintosh HD but you can enter whatever you like eg El_Capitan.
       



      3.  Quit DU and choose Macintosh HD to install El Capitan on.
       

      4.  After 20-30 min (depending on how fast your system is), the installation will complete and the VM will automatically reboot…
       

      5.  At the welcome screen, choose your country and keyboard layout.  You can skip transfer information, location services and logging in with your Apple ID if you wish…
       


      6.  Create a User Account and select your Time Zone.  You can skip sending diagnostics and usage data to Apple….
       


      7.  Finally, you will arrive at the El Capitan Desktop.  You should eject the Installation iso now by right clicking and selecting “Eject OS X Base System”.  This will allow you to install VMware Tools….
       



      8.  After rebooting, the VM can now be resized or run at full screen resolution.  Audio and network/internet should also work OOB.
       

       
      SMBIOS Customization and iMessage Vars
      To make the Virtual Machine more "Mac like", you can edit the vmx file to add unique identifiers from a real Mac's SMBIOS -
      eg for an iMac 11,3 SMBIOS, you can enter the following lines....
      smbios.reflectHost = "FALSE" board-id.reflectHost = "FALSE" board-id = "Mac-F2238BAE" hw.model.reflectHost = "FALSE" hw.model = "iMac11,3" serialNumber.reflectHost = "FALSE" serialNumber = "W80#######6" Refer How to spoof real Mac in VMware - Multi-booting and Virtualisation.
       
      The critical variables for iMessage/Facetime activation are MLB & ROM.  By default, VMware "reflects" the host's MLB and ROM since it assumes you are running the OSX guest on a real Mac host - see post#42 by @Donk.
       
      If the host is a Windows PC, the following lines need to be added to the vmx file (requires virtualHW.version 12 and smc.version = "0")....
      efi.nvram.var.ROM.reflectHost = "FALSE" efi.nvram.var.MLB.reflectHost = "FALSE" system-id.enable = "TRUE" and the MLB, ROM and optionally system-id entered manually eg
      efi.nvram.var.MLB = "W80######BA1A" (MLB can be 13 or 17 characters long, alphanumeric string) efi.nvram.var.ROM = "<=>?@A" (ROM is entered here as a 6 character ASCII string) uuid.bios = "## ## ## ## ## ## ## ##-## ## ## ## ## ## ## ##" <---Optional (if you want to inject a given system-id hexadecimal value) Note the output for ROM from imessage_debug is a 12 character hexadecimal that needs to be entered here as a 6 character ASCII string eg using an Hex to ASCII converter we find that "3c3d3e3f4041" hex is equivalent to   "<=>?@A".
       
      Vanilla Mavericks and Yosemite
      The same VM settings for El Capitan will also boot and run vanilla installations of OS X Mavericks and Yosemite .  Attached to this post are installer scripts to create bootable Mavericks (CMI.tool) and Yosemite (CYI.tool) ISOs for VirtualBox and VMware.
       
      With the respective OS X installer apps in the Applications folder, download and run the installer tools using terminal ie
       
      To create a Mavericks ISO on your desktop
      cd downloads chmod +x CMI.tool ./CMI.tool To create a Yosemite ISO on your desktop
      cd downloads chmod +x CYI.tool ./CYI.tool Here is a screenshot of the VM running Mavericks 10.9.5...
       

       
      Enjoy
       
      Update for macOS 10.12 Sierra
      The above settings still work for macOS Sierra after upgrading to VMware Workstation 12.5 and unlocker 2.0.8 - see post #13.
       
      Update for macOS 10.13 High Sierra and 10.14 Mojave
      See post#30 for macOS_iso_cim.tool script to create ISO for macOS using Apple's createinstallmedia utility.
      Post#41 describes how to build "Install macOS ******.app" on the fly from installer files downloaded beforehand in /SharedSupport folder.
       
      Update for macOS 10.15beta Catalina
      See post Update for macOS Catalina 10.15beta
       
      CECI.zip
      CYI.tool.zip
      CMI.tool.zip
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&amp;t=6771   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      -Install, check here 
      http://www.insanelymac.com/forum/topic/323052-guide-sierra-high-sierra-on-intel-5-6-7-8-and-9-chipset-series-nehalem-sandybridge-ivybridge-haswell-broadwell/
       
      -Clover Folder 
      CLOVER.zip
       
      -DSDT 
      DSDT.MaLd0n Supermicro X10DAI.zip
       
      -DSDT Patches 
      -FIX ERRORS AND WARNINGS -HPET -SATA -sSATA -DMAC -SLPB -DARWIN -LPC -XHCI -EHCI -PLUGIN TYPE -ALZA to HDEF -HDEF -RTC -IRQs -SBUS -BLC0 -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN #1 -LAN #2 -SPSR -WIFI -EC -PNLF -HDMI -NVME -Geekbench 

       
      -SS 


       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders! Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, MMido and many, many, many others!   We're all here to have fun and learn from each other!  
×