Jump to content
pippo99

No graphic acceleration for nVidia GeForce 9400m (Zotac Ion Itx A E)

4 posts in this topic

Recommended Posts

Hello everybody,

I have recently installed iakatos ML2 on a Zotac Ion ITX A E board (graphic card nVidia GeForce 9400m 512MB) but I am not able to get graphic acceleration.

After upgrading to 10.8.3 I had to delete the kext NVDA*.kext from S/L/E because they were blocking the boot.

Using Champlist I can change the resolution but in System Information / Graphics Displays I get:

 

Type: GPU

Bus: PCI

VRAM (Total): 5MB

Vendor: NVIDIA (0x10de)

Device ID: 0x087d

Revision ID: 0x00b1

Kernel Extension Info: No Kext Loaded

Displays:

Resolution: 10280 x 1024

Pixel Depth 32-Bit Color (ARGB8888)

Main Display: Yes

Mirror: Off

Online: Yes

 

I tried several alternative kext but nothing...

This is my first hachintosh and I'm not very expert.

Can someone provide me with any suggestion, please?

Share this post


Link to post
Share on other sites
Advertisement

Dear Artur,

thank you very much for your reply.

I'm following the guide from the link you provided.

 

I have added the EFI string to my org.chameleon.Boot.plist and now seems that System Information recognizes my card:

nVidia GeForce 9400m:
Chipset Model: nVidia GeForce 9400m
Type: GPU
Bus: PCI
VRAM (Total): 512 MB
Vendor: NVIDIA (0x10de)
Device ID: 0x087d
Revision ID: 0x00b1
ROM Revision: nVidia GeForce 9400m OpenGL Engine [EFI]
Displays:
Display:
Resolution: 1280 x 1024
Pixel Depth: 32-Bit Color (ARGB8888)
Main Display: Yes
Mirror: Off
Online: Yes

 

But, even if the card seems to be recognized I don't see any improvement in the HW acceleration.

Any other suggestion?

Thank in advance.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By capt1701a
      Hi,
       
      I'm new to the world of hackintosh and need some advice on how to get my Nvidia card 960 working as when High Sierra loads I have only 7mb, If I inject the Nvidia it goes to the resolution I want but then I have 0mb.  
      The High Sierra Version is 10.13.6 17G65. I have installed the latest nvidia driver and cuda driver 
      387.10.10.10.40.105 I have tried in clover configurator and ticking nvidia=1 as suggest on some forums but then I end up with a blurred background and no login box and the system hangs, If I upgrade to the latest version of clover 4741, i jest get a black screen before I get to the menu options so I am currently using 4463
       
      if it helps the motherboard is a gigabytes z170 xp-sli with an intel 660k 
      High sierra is being install on an external 128GB SSD
      Thanks for you help

       
    • By shmn
      Hi, I have been trying to follow @RehabMan 's guide to disable my dGPU ( https://www.tonymacx86.com/threads/guide-disabling-discrete-graphics-in-dual-gpu-laptops.163772/ ) for two days now, but haven't found a way to disable my 1080 Ti on my desktop Clover hack.

      I have a dual-boot (Win/Mac) machine on a Z370 Aorus 7. Since there's no nvidia drivers for Mojave atm, I want to stick with the iGPU under Mac, but still use the 1080 Ti under Win.

      The hack boots just fine when I remove the 1080 Ti, if it's plugged in via PCIe I get a kernel panic.
      Please find attached my ACPI folder, my clover config.plist and the kernel panic details.

      Might there even be a less hacky way than patching these ACPI files? I appreciate any kind of support! Thanks!
      ACPI.zip
      config.plist

      systemReport.txt
    • By arsradu
      Hi guys,
       
      So, this little tutorial is meant to help people fix a new issue with Mojave: opening jpg files (looks like it happens with larger files, not so much with smaller ones) using Quick Look (on spacebar key pressed) or Preview app using the dedicated GPUs.
      The issue is that, when trying to open jpg files (for some reason, it doesn't occur with pngs), the pop-up window would remain in an endless loop. And from that point forward, any other app trying to open the same file, will either become unresponsive (in the case of the Preview app) or just stay in endless loop (in case of Quick Look)
       
      As a workaround, in case the tutorial below doesn't work for you, you can use Grab (built-in app in MacOS) to open said files.
       
      This issues DOES NOT occur using the iGPU. So...if you're comfortable using the iGPU, just switch to that and you should be good to go. You don't need this tutorial.
       
      This tutorial is based on @Cyberdevs' research and testing on this topic (especially useful if you're using an RX series AMD video card), and my own very limited time testing this on my rig. I just thought it would be useful to create a new thread for it so that people can discuss this particular issue here.

       
      With that being said, I'll just move on to the actual tutorial.
       
      New (probably better) method.
       
      Switch your SMBIOS in Clover config in regards to the dedicated GPU you're using, instead of the CPU. Take a look here and choose the corresponding SMBIOS closest to your hardware.
      Yeah, that's it.
       
      In case you lose CPU PM with this method, there are multiple ways to fix that, and they do not make the object of this thread.  It worked perfectly fine for me though and I didn't need to change anything else.
       
      A simple Lilu plugin
       
      Thanks to vulgo for the plugin and @Matgen84 for sharing and testing it, we now have yet another possible solution to this issue. It's a Lilu plugin (which means that it requires Lilu.kext in order to work) it's called NoVPAJpeg, and it can be downloaded from here.
      You use it as a regular kext, alongside Lilu. I prefer (and recommend) using it within the EFI folder, in Clover/kexts/Other. But if you want to use it in S/L/E, that should work just fine.
       
      More info can be found in this post here.
       
      In case you wanna try alternative medicine  ...
       
      The main thing we need to do is actually very simple: we need to enable the iGPU (integrated GPU) by default, in BIOS, while actually being connected to the dedicated GPU.
       
      For ATI GPUs (curtesy of @Cyberdevs' post here).
       
      The discreet GPU should be set as primary in BIOS and your displays should be connected to your discreet GPU
      The iGD/iGPU/iGFX must be enabled in BIOS/UEFI as the secondary GPU.
       
      I removed the DSDT Reconfigured the config.plist to and removed some flags which weren't needed because of the DSDT added the InjectATI + Ornioco Framebuffer (I removed the Orinoco framebuffer because of some weird glitches but it might be useful for other AMD GPUs if you inject the correct framebuffer according to your GPU. No need to inject anything for nVidia GPUs unless your GPU needs it) Added the InjectIntel + ig-platform-id for my intel HD530 (for intel HD 530 I use the 0x19120001 ig-platform-id)  
      Steps 5 to 7 might not be necessary I just did them anyway, if anyone succeeded to get quicklook working without those steps let me know so I can exclude those steps.

           Also confirmed to work with AMD R9 270X on a SandyBridge rig (without an iGPU) using WhateverGreen + Lilu kexts, which also helped to solve the transparency issue along with the Quick Look problem, it also resolved the buggy Screen Capture (Command+Shift+5) issue as well. 
       
          Also, do:
      nvram cleanup kextcache & prelinked kernel rebuild reboot  More info on that here.
       
       
      For NVIDIA GPUs
       
      This is what I needed for my NVIDIA rig and the MSI motherboard in the signature. Your milage may vary, depending on your hardware. But, the idea should be the same regardless.
       
         For MSi motherboads (check out my motherboard details in the signature)
       
      Set your BIOS to use PEG (dedicated GPU) so you can boot.
      Since you're reading this, chances are that you're already connected to the dedicated GPU and the BIOS is set to PEG. So just go into BIOS and see if you're using the iGPU or the dedicated (PEG) graphics device by default.
      If you're already using this, skip to Step 3 (the part AFTER Reboot). Reboot (I think you don't necessarily need to boot into the OS...but you do need to reboot at least until Clover UI) Reboot back into BIOS and set it from PEG to IGD (integrated graphics) WITHOUT removing the cable. Save Reboot again.  
         The result should be that the OS is tricked into thinking you're booting with the IGPU when in fact you're using the dedicated GPU.
       
         For Gigabyte motherboards
       
         Set:
      Peripherals -> Initial Display Output -> iGFX Chipset -> Internal Graphics -> Enabled
           DVMT Pre-Allocation -> default 64M.
           DVMT Total Gfx Mem -> default 256M Save Reboot  
         You should do this with the cable connected to the dedicated GPU.
       
      You will also need to patch the iGPU from Clover config.
      1. Graphics -> Inject Intel (UNCHECK Inject Nvidia or ATI if it's checked).
      2. ig-platform-id (in my case for Intel HD 4600 Desktop) it was: 0x0d220003
       
      And use IntelGraphicsFixup.kext (now included into WhateverGreen.kext) in Clover/kexts/Other. In my particular case, without the kext, I would get freezes in Safari.
       
      Another way to activate the iGPU while having the dGPU set as primary is by going into BIOS/SAG/Graphics Configuration/iGPU and setting Multi-Monitor to [Enabled], all the rest remains on [Auto], and set Inject/Intel to [True] in Clover config.*.
       
      Thanks to @gjw for the tip.
       
      *Motherboard dependent. But the multi-monitor option might be the same regardless of manufacturer.
       
       
      This might be a bug with Mojave and it could be fixed by Apple in the future. but in the meantime, feel free to use this if it helps you fix the issue.
       
      For HP motherboards (including laptops), so far no solution, unless the BIOS somehow allows to switch from eGPU to iGPU and vice-versa.
       
      Cheers!
    • By rioredstone
      if a web driver is NOT installed, what happens??
       
      I used AMD RX560 in Sierra, but it is very unstable. usually gpu crash or window server crash occurred.
      so now I attached nvidea Quadro FX1700 to my Sierra. I know FX1700 works well in High Sierra, but I haven't tried it in Mojave yet.
      FX1700 works well without any additional kext, even nvidia web driver.
       
      I plan to buy a nividia card. I would like to know if a nvidia card, especially kepler, maxwell, pascal, works without web driver.
      just curious.
       
       
×