Jump to content
mnorthern

[Guide] Backlight + Brightness for Intel 8086:0046 (1st gen HD) (GMA 5700MHD)

181 posts in this topic

Recommended Posts

This issue is a real tough one to troubleshoot remotely; you're going to have to play around with it. Read my post for questions about point 2 and 5; read this for details on point 4.

I follow all of your instruction, now the backlight slider set to min put off my display and in max backlight is low, but i cannot wake from sleep.

Share this post


Link to post
Share on other sites
Advertisement

Hello, I tried a lot fixes in my dsdt and some kexts but still I can't login after wake from sleep. Someone can login after wake from sleep (with backlight working)? How fix this issue?

I only have this message in log "The USB device HubDevice (Port 1 of Hub at 0x1a000000) may have caused a wake by issuing a remote wakeup (2)".

 

Regards

Share this post


Link to post
Share on other sites

Thank you both for your efforts on bringing this guides, I have been struggling with this wakeup from sleep brightness for weeks, thanks to "jerrywilborn"s simplified guide I can wake my screen from sleep :D , keep :thumbsup_anim: up a good work.

@calmesal

My model is Dell Vostro 3400, which is similar to your 3300, and I'm struggling with the backlight issue after sleep.

Could you please send me your DSDT?

Thanks!

Share this post


Link to post
Share on other sites

@calmesal

My model is Dell Vostro 3400, which is similar to your 3300, and I'm struggling with the backlight issue after sleep.

Could you please send me your DSDT?

Thanks!

I applied Jerrywilborns guide and have the same BCL values as him, it work well for my LCD but I still have broblem with restore the value on restart, you may experement with the values to fit for your system.

DSDT.zip

Share this post


Link to post
Share on other sites

Felix Chan, can you add the following code to the end of your _WAK method and tell me what happens?

Notify (\_SB.PCI0.VID.LCD0, 0x86)
Notify (\_SB.PCI0.PEG.VID.LCD0, 0x86)
Store (0xFF, \BRLV)
\_SB.PCI0.LPC.EC.BRNS ()

 

 

 

 

 

Calmesal I think I know what you could try.. Can you make a backup of your ACPI BACKLIGHT kext, then copy the original kext to your desktop, show package contents, change the 'BQC use index' property in the Info.plist file to the opposite of whatever it is saying now, then reinstall using kext wizard, and restart. Let me know if anything changed and if you are still getting those messages in your log, thanks

 

EVERYONE, one more thing i forgot to mention

 

You will need the following properties to be injected into your screen's properties. Either via Natit or DSDT (in your GFX0/VID0/graphics device, find or create Method (_DSM, 4, NotSerialized)

and inside it Store (Package ( ) { X }, Local0 )

then call DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))

Return (Local0)

 

where X is the code below:

 

"AAPL,BacklightRestore",
Buffer (0x04)
{
0x01, 0x00, 0x00, 0x00
},

"AAPL,HasPanel",
Buffer (0x04)
{
0x01, 0x00, 0x00, 0x00
},

"AAPL,Haslid",
Buffer (0x04)
{
0x01, 0x00, 0x00, 0x00
},

"AAPL,backlight-control",
Buffer (0x04)
{
0x01, 0x00, 0x00, 0x00
},

"@0,backlight-control",
Buffer (0x04)
{
0x01, 0x00, 0x00, 0x00
},

"@0,AAPL,boot-display",
Buffer (0x04)
{
0x01, 0x00, 0x00, 0x00
},

"@0,built-in",
Buffer ()
{
One
},

Can someone please help me inject _DSM method into my DSDT, I got compile error when I try.

Thanks!

DSDT.aml.zip

Share this post


Link to post
Share on other sites

Hi,

 

I still can't get my VGA out after days of struggling. My Intel HD Graphics 5700MHD now has full QE/CI thanks to this guide; however, the VGA output doesn't work and my laptop happens to have no HDMI out :(

 

Here is my dsdt. Would any one help me out?

all.aml.zip

Share this post


Link to post
Share on other sites

Hello everybody, first I want to THANK all of you because of all this kexts and fixes for our hackintoshes, and well I've been followed all guides and I can say that I'm writing from my Gateway NV59c and it works perfect!!! or almost perfect, I recently updated to 10.8.3 and reinstall the FB alternate and works like a charm, (even the Shell screensaver). But anyway, getting to the point of this guide for backlight and brightness I'm just very carefully about it because I'm a little confused and I dont wanna mess my installation. I tried to follow this but I'm working without a DSDT and my Motherboard is not listed on the DSDT data base, I dont know how to get this fix to work if I can't even get my own DSDT.

 

I will be very happy if you point me to some direction, so my hackintosh is nearly perfect. Theres are a couple of things that also are not working as I would like to, one is the battery, it seems that is doesn't charge anymore, neither in my windows partition, it only gets like 18% and stucks there... And the other one is the awake task, when my gateway sleeps it doesn't awake, it can display a very very dark frame that seems to be the user login, but I can do anything, I have to shutdown and restart everytime it happens. And it is also the same problem on my windows partition, but the difference is that in win 7 the user login frame doesn't shows at all. I think is a problem with the hardware itself and not precisely a OSX kext or fix related, but if you have any suggestions I'll be happy to hear.

 

Well thanx again for your time and sorry if I missed a little for the main topic of the post, hope somebody can help me. See you!!! :blush:

 

 

Thank you, you are very kind.............. :mellow:

Share this post


Link to post
Share on other sites

Thank you :D

I searched everywhere for the solution of these 2 problems (black screen after wake up, brightness control) with no hope, you saved me !

Share this post


Link to post
Share on other sites

@mnorthern, good news here! I'm now able to wake up with backlight, finally! Attached is my working dsdt.

 

The changes are that I removed the original _WAK contents and added what you gave me:

 

Method (_WAK, 1, NotSerialized)
{
 Store (0x80000000, LEVW)
 Store (0x061A061A, LEVX) // This value should vary based on the RW Everything inspect results
 Store (0x80000000, LEV2)
 Store (0x12FF, LEVL)
 Return (Package (0x02)
 {
	 Zero,
	 Zero
 })
}

 

To enable sleep, I also removed my EHC2 device, which maybe the SD card slot; however I have to keep the EHC1 device so that my external USB wireless card (with a RTL8192CU7 chip) will resume working after waking up.

 

This is, however, only a special case for this strange graphic card. I'm not sure why it works without all the wake up logic; also, I don't understand why my Fn+Brightness keys work without showing the sun icon on screen.

 

BTW, the annoying coil sound remains.

 

Again thank you very much @mnorthern!

 

My laptop is the same model with you Felix, and BAR1 is 0xF2000004 too. Only "Interrupt Line" is none which Felixs' is IRQ11.

I changed _WAK to

 

Method (_WAK, 1, NotSerialized)

{

Store (0x80000000, LEVW)

Store (0x061A061A, LEVX) // This value should vary based on the RW Everything inspect results

Store (0x80000000, LEV2)

Store (0x12FF, LEVL)

Return (Package (0x02)

{

Zero,

Zero

})

}

 

and added

OperationRegion (BRIT, SystemMemory, 0xF2048254, 0x04)

Field (BRIT, AnyAcc, Lock, Preserve)

{

LEVL, 32

}

OperationRegion (BRI2, SystemMemory, 0xF2048250, 0x04)

Field (BRI2, AnyAcc, Lock, Preserve)

{

LEV2, 32

}

OperationRegion (BRI3, SystemMemory, 0xF20C8250, 0x04)

Field (BRI3, AnyAcc, Lock, Preserve)

{

LEVW, 32

}

OperationRegion (BRI4, SystemMemory, 0xF20C8254, 0x04)

Field (BRI4, AnyAcc, Lock, Preserve)

{

LEVX, 32

}

 

I

 

but still no brightness bar in System Preference

 

I can always control brightness with Fn+Brightness keys, but could not load AcpiBacklight.kext

 

How to load AcpiBacklight.kext and get the brightness bar in System Preference and Brightness Sun Bezel?

Share this post


Link to post
Share on other sites

hi, my laptop does not have windows 7, I want to find BAR1 address in MAC OS, please help me

 

http://www.insanelymac.com/forum/topic/287133-guide-backlight-brightness-for-intel-80860046-1st-gen-hd-gma-5700mhd/page__st__20#entry1898325

 

You can determine your BAR in Linux as well. Create a bootable Ubuntu USB stick (I like using unetbootin) and run 'lspci -s 00:02.0 -vvxxxx' as root. The line that says '10:', the first four bytes are your BAR (little endian). Read baongoc124's post and you'll be able to see more clearly.

 

This is the easiest path to getting it.

Share this post


Link to post
Share on other sites

Thanks you, here is my dump code :

 

pcilib: 0000:00:02.0 64-bit device address ignored.
00:02.0 VGA compatible controller: Intel Corporation Arrandale Integrated Graphics Controller (rev 12) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Unknown device 14c2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d3400000 (64-bit, non-prefetchable)
Region 2: Memory at <ignored> (64-bit, prefetchable)
Region 4: I/O ports at e080
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee00000 Data: 4090
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCIe advanced features <?>
00: 86 80 46 00 07 04 90 00 12 00 00 03 00 00 00 00
10: 04 00 40 d3 00 00 00 00 0c 00 00 a0 0f 00 00 00
20: 81 e0 00 00 00 00 00 00 00 00 00 00 43 10 c2 14
30: 00 00 00 00 90 00 00 00 00 00 00 00 10 01 00 00
40: 09 00 0c 01 26 61 b1 00 88 00 c0 00 0f 17 17 17
50: 00 00 50 03 0b 00 00 00 00 00 00 00 00 00 00 ae
60: 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 05 d0 01 00 00 00 e0 fe 90 40 00 00 00 00 00 00
a0: 11 11 11 00 13 00 06 03 00 00 14 60 25 04 3a 30
b0: 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 a4 22 00 00 00 00 00 00 00 00 00 00 01 02 00
e0: 00 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 ab 0f 14 00 18 a0 d9 aa

 

and my BAR1 address is D3400004 ?

 

The screenshot above is from giofrida's system. Because his BAR0 starts with 0xC.. we will need to modify the OperationRegions below so that 0xB00048254 becomes 0xC00048254, and 0xB00048250 becomes 0xC0048250 etc. You will need to do this for your system.

I don't know how to modifile, please help me

Share this post


Link to post
Share on other sites

Thanks you, here is my dump code :

 

pcilib: 0000:00:02.0 64-bit device address ignored.
00:02.0 VGA compatible controller: Intel Corporation Arrandale Integrated Graphics Controller (rev 12) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Unknown device 14c2
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d3400000 (64-bit, non-prefetchable)
Region 2: Memory at <ignored> (64-bit, prefetchable)
Region 4: I/O ports at e080
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: fee00000 Data: 4090
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [a4] PCIe advanced features <?>
00: 86 80 46 00 07 04 90 00 12 00 00 03 00 00 00 00
10: 04 00 40 d3 00 00 00 00 0c 00 00 a0 0f 00 00 00
20: 81 e0 00 00 00 00 00 00 00 00 00 00 43 10 c2 14
30: 00 00 00 00 90 00 00 00 00 00 00 00 10 01 00 00
40: 09 00 0c 01 26 61 b1 00 88 00 c0 00 0f 17 17 17
50: 00 00 50 03 0b 00 00 00 00 00 00 00 00 00 00 ae
60: 00 00 02 00 00 00 00 00 00 00 00 00 00 00 00 00
70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
90: 05 d0 01 00 00 00 e0 fe 90 40 00 00 00 00 00 00
a0: 11 11 11 00 13 00 06 03 00 00 14 60 25 04 3a 30
b0: 00 00 00 00 00 00 00 00 00 02 00 00 00 00 00 00
c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
d0: 01 a4 22 00 00 00 00 00 00 00 00 00 00 01 02 00
e0: 00 00 00 00 00 00 00 00 00 80 00 00 00 00 00 00
f0: 00 00 00 00 00 00 00 00 ab 0f 14 00 18 a0 d9 aa

 

and my BAR1 address is D3400004 ?

 

 

I don't know how to modifile, please help me

 

The OperationsRegions go right above the Scope _SB. These OperationsRegions are what the methods communicate; they correlate directly to memory in the physical hardware. Add this above your Scope _SB:

 

 

OperationRegion (BRI1, SystemMemory, 0xD3048250, 0x08)

Field (BRI1, AnyAcc, Lock, Preserve)

{

LEV2, 32,

LEVL, 32

}

OperationRegion (BRI2, SystemMemory, 0xD30C8250, 0x08)

Field (BRI2, AnyAcc, Lock, Preserve)

{

LEVW, 32,

LEVX, 32

}

 

If you have your methods setup correctly you'll see the messages in your system.log (grep for ACPIBacklight). If your regions are correct, then the methods will be able to speak to your card.

Share this post


Link to post
Share on other sites

It is just sad that I followed this guide and my screen still doesn't show on after wake up even though it works for many other guys.

 

Anyway, for anyone only use Linux like me, if you want to get the value of register ending with C8254 you can use this command.

 

dd if=/dev/mem of=/tmp/aaaa ibs=1 skip=$((0xf00c8254)) count=4; hd /tmp/aaaa

 

I used 0xf00c8254 because my BAR0 is 0xf0000004. Replace the address with your machine's value. And remember to run this as root.

Share this post


Link to post
Share on other sites

Hi guys, sorry but i'm trying to compile my dsdt but i get 2 errors for this line.

 

 

Return (^^PCI0.GFX0.DD02._BQC ())

 

^^PCI0.GFX0._DOS (Arg0)

 

 

And i don't understand this (

In the code snippet above, you may have to change whenever it says "PCI0.GFX0..." to your equivalent, eg. say "_SB.PCI0.VGA0" or something.) Can you help me? Thanks

 

Edit: I have compiled without errors and some warning. I put dsdt.aml in extra folder, installed kext, but my hackintosh don't boot, it stop during the apple logo.

Share this post


Link to post
Share on other sites

Now if i boot in verbose mode works, the slider in monitor preference works, but i found only one button in the keyboard, for to increase brightness. Can you help me? Why in normal mode don't works? If someone can help me, i attach my dsdt. Thanks

alboz83.aml.zip

Share this post


Link to post
Share on other sites

i am having some issues trying to figure out how to edit my DSDT file i tryed to upload my DSDT file but it would not let me.. could someone give me a hand?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MaLd0n
      ---INSTALLATION TUTORIAL---
       
      ---Original Post---
      https://olarila.com/forum/viewtopic.php?f=45&t=9172
       
      ---USB---
      https://pikeralpha.wordpress.com/2016/07/13/simple-skylake-usb-fix-no-kexts-required/
       
      ---CLOVER FOLDER---
       
      CLOVER.zip
       
       
      --MOBO
      GigaByte Z390 M Gaming



      --PROCESSOR
      Intel Core i9-9900K


      --COOLER
      CoolerMaster MasterLiquid ML120R RGB


      --MEMORY
      Corsair Dominator Platinum 16GB (2 x 8GB)


      --GPU
      Sapphiretech Radeon RX 590 8 GB GDDR5


       
      --SSD
      Samsung 970 EVO NVMe M2 Flash Drive


      --POWER SUPPLY
      EVGA 750 N1, 750W


      --WIRELESS
      TP-Link Archer T9E


      --BLUETOOTH
      Orico BTA-403


      --CASE
      Thermaltake View 21 Tempered Glass Edition


      --DSDT Patches--
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE 10 ID -DMAC -REMOVE 22K LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM / REAL TIME CLOCK -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -MIKEY -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -OPERATION REGION GPIO -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES  
      --SCREENSHOTS--





























      --BruceX--
       
      --USB-C-- test with SanDisk Ultra USB-STICK 128gb


       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By Drovosek
      For my laptop Hp Pavilion 15-au028ur worked patch for HP 3165sf
      I also experimented with manual patching and assembled my own version:

      #Maintained by: RehabMan for: Laptop Patches #Battery_HP-DV6-1380ek.txt # created by RehabMan 2019-xx-xx # based on Battery_HP-DV6-1380ek.txt # additional patches for dv6-1380ek provided by chihab222, credit gsly # works for: #  HP Pavilion 15-au028ur, per Drovosek into method label B1B2 remove_entry; into definitionblock code_regex . insert begin Method (B1B2, 2, NotSerialized) { Return (Or (Arg0, ShiftLeft (Arg1, 8))) }\n end; # 16-bit EC0 registers #                BADC,   16, #                BFCC,   16, #                MCUR,   16, #                MBRM,   16, #                MBCV,   16, into device label EC0 code_regex BADC,\s+16, replace_matched begin ADC0,8,ADC1,8, end; into device label EC0 code_regex BFCC,\s+16, replace_matched begin FCC0,8,FCC1,8, end; into device label EC0 code_regex MCUR,\s+16, replace_matched begin CUR0,8,CUR1,8, end; into device label EC0 code_regex MBRM,\s+16, replace_matched begin BRM0,8,BRM1,8, end; into device label EC0 code_regex MBCV,\s+16, replace_matched begin BCV0,8,BCV1,8, end; # 16-bit method access into method label CLRI code_regex (\^.*)MBRM replaceall_matched begin B1B2\(%1BRM0,%1BRM1\) end; into method label UPBS code_regex (\^.*)MBRM replaceall_matched begin B1B2\(%1BRM0,%1BRM1\) end; into method label UPBI code_regex (\^.*)BFCC replaceall_matched begin B1B2\(%1FCC0,%1FCC1\) end; into method label UPBS code_regex (\^.*)MCUR replaceall_matched begin B1B2\(%1CUR0,%1CUR1\) end; into method label UPBS code_regex (\^.*)MBCV replaceall_matched begin B1B2\(%1BCV0,%1BCV1\) end;
      The only problem - when it reaches 100% charge, it no longer falls until you reset the CMOS (15-30 seconds hold down the power button on the laptop). In the rehabman guide there is a patch for ASUS in this case, there is a patch method FBST. There is no such method in my DSDT.
      Can someone help?
      Here's a patched and clean DSDT: https://vk.com/doc183234383_509697931
    • By jamesxxx1997
      Hi everyone~
      Now using mojave 10.14.4 , I am patching my dsdt and ssdt but have four syntax error with my dsdt.dsl , and I don't know how to fix it.
       
      My specs:
      lenovo thinkpad x1 yoga 3rd
      CPU : i7-8550u
      graphics : uhd620
       
      The file of my dsdt and ssdt , ioreg , and my efi is in this link:https://drive.google.com/drive/folders/1T1nv1QgqDtczXrohdlQUJ_8O-kPpoSEf?usp=sharing
       
      thanks!
    • By bcuraboy3
      Good morning everyone. I have a HP Pavillion with the following specs
      I have managed to install MOjave on it, using Rehabman's config for Intel HD5500. 
      But I need some help with a DSDT for it.
      Would anyone be kind enough to have a look at the zip file, which contains the EFI folder, a IOREG, and some screenshots from DPCI Manager,
      and help me with a good DSDT patched and a correct config.plist for it?   
      Thank you very much.  Highly appreciated 
      I have also included a report from Aida64 in case anyone needs it 
       
      15-p200np
       
      Número do equipamento
      L5Z67EA
      Microprocessador
      Intel Core i7-5500U com placa gráfica Intel HD 5500 (2,4 GHz, 4 MB de cache, 2 núcleos);
      Memória
      SDRAM DDR3L de 4 GB a 1600 MHz (1 x 4 GB)
      Placa de vídeo
      NVIDIA GeForce 840M (DDR3 dedicada de 2 GB) >>  disabled already using the config.plist provided 
      Disco rígido
      SATA 1 TB 5400 rpm
      Unidade multimédia
      Gravador de DVD SuperMulti
      Visor
      HD BrightView com retroiluminação WLED de 39,6 cm (15,6 pol.) na diagonal (1366 x 768)
      Placa de rede
      Ethernet LAN Base-T 10/100 integrada
      Conectividade sem fio
      Combo 802.11b/g/n (1x1) e Bluetooth 4.0 (compatível com Miracast) >> It's not supported, but a DW1550 it's on it's way 
      Som
      BeatsAudio com 2 altifalantes >>  it's a ALC 290 
      Teclado
      Tamanho completo tipo ilha com teclado numérico
      Dispositivo
      HP Imagepad com suporte de gestos multi-toque
      Portas externas
      1 leitor de cartões multimédia SD multi-formato
      1 HDMI
      1 combinação auscultadores/microfone
      1 USB 2.0
      2 USB 3.0
      1 RJ-45
      Dimensões
      38,45 x 26,02 x 2,39 cm
      Peso
      2,27 kg
      Alimentação
      Transformador de alimentação CA de 65 W
      Polímero de iões de lítio 4 cél. 41 Wh
      Câmara
      Câmara Web HP TrueVision HD (frontal) com microfone digital de matriz dupla integrado
      Mac-Pro-Noi.zip
      Report.htm
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&amp;t=6771   Nehalem, SandyBridge, IvyBridge, Haswell, Broadwell     Skylake, Kabylake and Coffeelake is here http://www.insanelymac.com/forum/topic/321872-guide-sierra-on-gigabyte-mobos-serie-200-kabylake-dsdt/   Install MacOS with Olarila Image, Step by Step, Install and Post Install
       
      https://olarila.com/forum/viewtopic.php?f=50&t=8685
        Mojave Full DSDT patch   http://olarila.com/forum/viewtopic.php?f=59&amp;t=6428   First...   ***Update bios to last available version!***   If you need a full patched DSDT...  -Extract tables with F4 key in Clover boot screen! -Run it and send me files! RunMe.app   Installation   --Create a bootable copy of macOS Sierra / High Sierra / Mojave   https://github.com/chris1111/Create-Install-Media/releases   --Install Clover in USB stick   https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Install Sierra/High Sierra and boot into system!   Post Installation --Install Clover and replace with my folder   https://olarila.com/files/Clover.Folder/CLOVER.SERIES.CHIPSET.zip   --Reboot and activate video!   Bingo!   Now you need a fine tune! DSDT time!   --DSDT   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -XXXX to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI
       
      --Power Management
      - 1 Generation Intel Processors, use Generate P and C States in config.plist
      - 2 and 3 Generations Intel Processors, Generate SSDT with Piker script and drop CpuPm and Cpu0Ist SSDTs
      ssdtPRGen.command.zip
      Credits-https://github.com/Piker-Alpha/ssdtPRGen.sh
      - 4 Generation+ Intel Processors, use PluginType=1 in DSDT, SSDT or Clover config.plist
       
      for check Power, Frequency, Temperature and Utilization, use it
       
      Install Intel Power Gadget.pkg.zip
       
      --Brightness
      Install .app, select the required permission and reboot. Work in F1 / F2 keys!
      NativeDisplayBrightness.app.zip


      https://github.com/Bensge/NativeDisplayBrightness/releases
      *in some cases .app don't work, check patches in config.plist inside Clover folder Post Install
       
      --Clover
       
      https://sourceforge.net/projects/cloverefiboot/files/Installer/
       
      --AUDIO
       
      Use DSDT + AppleAlc
       
      --install Lan driver by Mieze
        -Atheros   http://www.insanelymac.com/forum/files/file/313-atherose2200ethernet/   -Intel   http://www.insanelymac.com/forum/files/file/396-intelmausiethernet/   -Realtek   http://www.insanelymac.com/forum/files/file/88-realtekrtl8111-binary/   --Links   -FakeSMC   https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek   -Audio   https://github.com/vit9696/AppleALC http://www.insanelymac.com/forum/topic/314406-voodoohda-289/   -USB   https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   It's time to Rock   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Apple, Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!  
×