Jump to content
  1. Rampage Dev

    Rampage Dev

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Diptamondal
      dell inspiron 5378 hackintosh wifi don't work 
    • By eliot6001
      I don't know whether my LAN device will work on MAC and Which version of mac but i still want to run MAC on my PC, Also i checked my CPU-GPU and it turned out that i can Run MAX High sierra but i realized that some people have trouble with Sound and Internet connection so Here's the NAME of my LAN device:
       
      PCI\VEN_10EC&DEV_8136&SUBSYS_012310EC&REV_05\4&45F2A70&0&00E1 as (LAN DEVICE took the name from device manager in  windows). 
      also from compatibleIds i got this:
      PCI\VEN_10EC&DEV_8136&REV_05
       
      Is it Supported on any version of macOS ?
    • By Slice
      Some users claim that using VoodooHDA they hear loud bump at system start and sound in system comes with noise.
      Although this can be repaired with existing drivers I propose a version that do this automatically.
      It started silently and have very clear output. The file is compiled as 32/64 and works from 10.6 up to 10.12.
      VoodooHDA.kext-289.zip
      The sources is in my signature.
       
      There is a VoodooHDA,prefPane compatible with Sierra
      VoodooHDA.prefPane-289.zip

       
      Now there is a version 2.9.0 by Zenith432.
      It can work with multichannel sound and play it on 5.1 analog system.

      VoodooHDA.kext-2.9.0d8.zip
      27.04.2017 
      d10 - Fix issues involving AudioControls
      VoodooHDA.kext-2.9.0d10.zip
       
      20.11.2018
      Fix issue with scratch on slow CPU
      VoodooHDA.kext-291SSE.zip
       
      04.05.2019
      More checks for memory allocation. More clear sound anyway. 
      VoodooHDA.kext-292.zip
      IOAudioFamily.kext.zip
       
       
    • By Mieze
      Being asked to add support for Realtek's Fast Ethernet PCIe NICs to my RTL8111 driver I got tired of answering the same old question again and again so that I finally decided to write a separate driver for these chips and to make a few of you guys and gals happy.
       
      As of now the driver supports the following members the RTL810X Fast Ethernet family:
      RTL8101E RTL8102E RTL8103E RTL8401E RTL8105E RTL8402 RTL8106E RTL8106EUS RTL8107E   Here is a list of the driver's basic features:
      Supports Sierra (maybe El Capitan). 64 bit architecture only. Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). TCP segmentation offload under IPv4. Support for TCP/IPv6 and UDP/IPv6 checksum offload. Supports Wake on LAN. Support for Energy Efficient Ethernet (EEE) which can be disabled by setting enableEEE to NO in the drivers Info.plist without rebuild. The default is YES. The driver is published under GPLv2. Built using Xcode 4.6.3.  
      Changelog Version 2.0.1 (2018-05-10): Fixes a problem with retrieval of the permanent MAC address on some chips. Version 2.0.0 (2017-04-04): Uses Apple's private driver interface introduced with 10.8. Adds support for the RTL8107E. Supports packet scheduling with QFQ. Adds support for flow control and EEE. Version 1.0.0 (2014-05-24): First offical release.     Installation   Before you install the driver you have to remove any installed driver for RTL810X. Goto /S/L/E and delete the old driver. Recreate the kernel cache. Open System Preferences and delete the corresponding network interface, e. g. en0. If you forget this step you might experience strange problems with certain Apple domains, iTunes and iCloud later. Install the new driver and recreate the kernel cache. Reboot Open System Preferences again, select Network and check if the new network interface has been created automatically or create it manually now. Configure the interface.   Help - I'm getting kernel panics!
      Well, before you start complaining about bugs after you upgraded macOS and ask me to publish a driver update, you should first try to resolve the issue on your own by cleaning the system caches.
      As the driver uses macOS's private network driver interface, which is supposed to be used by Apple provided drivers only, you might run into problems after an OS update because the linker may fail to recognize that IONetworking.kext has been updated and that the driver needs to be linked against the new version (Apple provided drivers avoid this problem because they are always updated together with IONetworking.kext). As a result, the linking process produces garbage and the driver may call arbitrary code when trying to call functions from IONetworking.kext. This usually results in unpredicted behavior or a kernel panic. In order to recover from such a situation, you should clean the System Caches forcing the linker to recreate it's caches:
      Delete all the files in /System/Library/Caches and it's subdirectories but leave the directories and the symbolic links intact. This is very important! Reboot. Recreate the kernel cache. Reboot again.  
      Troubleshooting Make sure you have followed the installation instructions especially when you have issues with certain domains while the others are working fine. Use the debug version to collect log data when trying to track down problems. The kernel log messages can be retrieved with "grep kernel /var/log/system.log" in Terminal. Starting from Sierra use "log show --predicate "processID == 0" --debug" in order to retrieve kernel logs. Include the log data when asking for support or giving feedback. I'm an engineer, not a clairvoyant. Don't copy and paste large amounts of log data to your post. Create an archive with the log data and attach it to your post. In case you don't want to make your log data publicly accessible, contact me via PM and I will provide you a mail address to send it directly to me.  Check your BIOS settings. You might want to disable Network Boot and the UEFI Network Stack as these can interfere with the driver. Double check that you have removed any other Realtek kext from your system because they could prevent the driver from working properly. Delete the following files: /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist /Library/Preferences/SystemConfiguration/preferences.plist Verify your bootloader configuration, in particular the kernel flags. Avoid using npci=0x2000 or npci=0x3000.  In Terminal run netstat -s in order to display network statistics. Carefully examine the data for any unusual activity like a high number of packets with bad IP header checksums, etc. In case auto-configuration of the link layer connection doesn't work it might be necessary to select the medium manually in System Preferences under Network for the interface. Use Wireshark to create a packet dump in order to collect diagnostic information. Keep in mind that there are many manufacturers of network equipment. Although Ethernet is an IEEE standard, different implementations may show different behavior causing incompatibilities. In case you are having trouble try a different switch or a different cable.  
      Getting the driver
      There is a prebuilt binary in the Download section of this site: http://www.insanelymac.com/forum/files/file/259-realtekrtl8100-binary/ The source code can be found on Github: https://github.com/Mieze/RealtekRTL8100   Mieze
    • By Mieze
      A New Driver for Realtek RTL8111
       
      Due to the lack of an OS X driver that makes use of the advanced features of the Realtek RTL81111/8168 series I started a new project with the aim to create a state of the art driver that gets the most out of those NICs which can be found on virtually any cheap board on the market today. Based on Realtek's Linux driver (version 8.035.0) I have written a driver that is optimized for performance while making efficient use of system resources and keeping the CPU usage down under heavy load.

      Key Features of the Driver
      Supports Realtek RTL8111/8168 B/C/D/E/F/G found on recent boards. Support for multisegment packets relieving the network stack of unnecessary copy operations when assembling packets for transmission. No-copy receive and transmit. Only small packets are copied on reception because creating a copy is more efficient than allocating a new buffer. TCP, UDP and IPv4 checksum offload (receive and transmit). TCP segmentation offload under IPv4. Support for TCP/IPv6 and UDP/IPv6 checksum offload. Fully optimized for Mountain Lion (64bit architecture) but should work with Lion too. As of now there is no support for Snow Leopard but it can be added if someone will create the necessary patches. Supports Wake on LAN. Support for Energy Efficient Ethernet (EEE) which can be disabled by setting enableEEE to NO in the drivers Info.plist without rebuild. The default is YES. The driver is published under GPLv2.  
      Limitations
      As checksum offload doesn't work with jumbo frames they are currently unsupported and will definitely never be. No support for 32bit kernels.  
      Installation
      Before you install the driver you have to remove any installed driver for RTL8111/8168.
      Goto /S/L/E and delete the old driver (Lnx2mac, AppleRealtekRTL8169, etc.). Recreate the kernel cache. Open System Preferences and delete the corresponding network interface, e. g. en0. If you forget this step you might experience strange problems with certain Apple domains, iTunes and iCloud later. Reboot. Install the new driver and recreate the kernel cache. I recommend to use Kext Wizard or a similar utility for the installation. Reboot Open System Preferences again, select Network and check if the new network interface has been created automatically or create it manually now. Configure the interface.  
      Help - I'm getting kernel panics!
      Well, before you start complaining about bugs after you upgraded macOS and ask me to publish a driver update, you should first try to resolve the issue on your own by cleaning the system caches.
      As the driver uses macOS's private network driver interface, which is supposed to be used by Apple provided drivers only, you might run into problems after an OS update because the linker may fail to recognize that IONetworking.kext has been updated and that the driver needs to be linked against the new version (Apple provided drivers avoid this problem because they are always updated together with IONetworking.kext). As a result, the linking process produces garbage and the driver may call arbitrary code when trying to call functions from IONetworking.kext. This usually results in unpredicted behavior or a kernel panic. In order to recover from such a situation, you should clean the System Caches forcing the linker to recreate it's caches:
      Delete all the files in /System/Library/Caches and it's subdirectories but leave the directories and the symbolic links intact. This is very important! Reboot. Recreate the kernel cache. Reboot again.  
      Troubleshooting
      Make sure you have followed the installation instructions especially when you have issues with certain domains while the others are working fine. Use the debug version to collect log data when trying to track down problems. The kernel log messages can be found in /var/log/system.log. For Sierra and above use "log show --predicate "processID == 0" --debug" in order to retrieve kernel logs. Include the log data when asking for support or giving feedback. I'm an engineer, not a clairvoyant. Check your BIOS settings. You might want to disable Network Boot and the UEFI Network Stack as these can interfere with the driver. Double check that you have removed any other Realtek kext from your system because they could prevent the driver from working properly. Verify your bootloader configuration, in particular the kernel flags. Avoid using npci=0x2000 or npci=0x3000.  In Terminal run netstat -s in order to display network statistics. Carefully examine the data for any unusual activity like a high number of packets with bad IP header checksums, etc. In case auto-configuration of the link layer connection doesn't work it might be necessary to select the medium manually in System Preferences under Network for the interface. Use Wireshark to create a packet dump in order to collect diagnostic information. Keep in mind that there are many manufacturers of network equipment. Although Ethernet is an IEEE standard different implementations may show different behavior causing incompatibilities. In case you are having trouble try a different switch or a different cable.  
      FAQ
      How can I retrieve the kernel logs? In Terminal type "grep kernel /var/log/system.log". I want to disable Energy Efficient Ethernet (EEE) but I don't know how? Take a look at the driver's Info.plist file. There you will find an option named <key>enableEEE</key>. Change its value from <true/> to <false/>. Don't forget to recreate the kernel cache after changing the value. WoL from S5 doesn't work with this driver but under Windows it's working. Is this a driver bug? No it isn't, the driver is working as it should because OS X doesn't support WoL from S5.  
      Current status
      The driver has been successfully tested under 10.8.x and 10.9 with the B, C, D, E, F and G versions of the RTL8111/8168 and is known to work stable on these devices.  
      Changelog
      Version 2.2.2 (2018-01-21) Force ASPM state to disabled/enabled according to the config parameter setting. Requires 10.12 or newer. Version 2.2.1 (2016-03-12): Updated underlying linux sources from Realtek to 8.041.00. Added support for RTL8111H. Implemented Apple’s polled receive driver model (RXPOLL). Requires 10.11 or newer. Support for older versions of OS X has been dropped. Version 2.0.0 (2015-06-21): Uses Apple's private driver interface introduced with 10.8. Supports packet scheduling with QFQ. Please note that 2.0.0 is identical to 2.0.0d2. Only the version number has changed. Version 1.2.3 (2014-08-23): Reworked TSO4 and added support for TSO6. Version 1.2.2 (2014-08-44): Added an option to disable Active State Power Management (ASPM, default disabled) as ASPM seems to result in unstable operation of some chipsets. Resolved a problem with Link Aggregation after reboot. Added a workaround for the multicast filter bug of chipset 17 (RTL8111F) which prevented Bonjour from working properly Version 1.2.0 (2014-04-24): Updated underlying linux sources from Realtek to 8.037.00. Improved interrupt mitigate to use a less aggressive value for 10/100 MBit connections. Version 1.1.3 (2013-11-29): Improved transmit queue handling made it possible to reduce CPU load during packet transmission. Improved deadlock detection logic in order to avoid false positives due to lost interrupts. Version 1.1.2 (2013-08-03): Improved SMB performance in certain configurations. Faster browsing of large shares. Version 1.1.0 (2013-06-08): Support for TCP/IPv6 and UDP/IPv6 checksum offload added (can be disabled in Info.plist). Maximum size of the scatter-gather-list has been increased from 24 to 40 segments to resolve performance issues with TSO4 when offloading large packets which are highly fragmented. TSO4 can be disabled in Info.plist without rebuild. Statistics gathering has been improved to deliver more detailed information (resource shortages, transmitter resets, transmitter interrupt count). The interrupt mitigate settings has been changed to improve performance with SMB and to reduce CPU load. Configuration option added to allow for user defined interrupt mitigate settings without rebuild. Version 1.0.4 (2013-05-04): Moved setLinkStatus(kIONetworkLinkValid) from start() to enable(). Cleaned up getDescCommand(). Version 1.0.3 (2013-04-25): The issue after a reboot from Windows has been eliminated. Version 1.0.2 (2013-04-22): Added support for rx checksum offload of TCP and UDP over IPv6. Version 1.0.1 (2013-03-31): Improved behavior when rx checksum offload isn't working properly. Adds the chipset's model name to IORegistry so that it will show up in System Profiler.  
      Known Issues
      There are still performance problems with regard to SMB in certain configurations. My tests indicate that Apple's Broadcom driver shows the same behavior with those configurations. Obviously it's a more general problem that is not limited to my driver. WoL does not work in certain configurations. Old systems with 3 and 4 series chipsets exhibit performance issues in recent versions of macOS because there is no optimized power management for these systems in macOS anymore as Apple dropped support for the underlying hardware a long time ago. In case you are affected, please upgrade your hardware or find an alternative solution because I have no plans for a workaround. Sorry, but I don't think that it's worth the effort.  
      Getting the driver
      The source code can be found here: https://github.com/M...driver_for_OS_X There is also a pre-build binary for Mavericks and Yosemite: http://www.insanelym...n-and-wireless/  
      Building from Source
      I'm using XCode 4.6.3 for development. You can get a free copy of XCode after becoming a member of the Apple developer program. The free membership is sufficient in order to get access to development tools and documentation.
×