Jump to content
Sign in to follow this  
Followers 0
thm

p8z77-v pro ML DSDT mit 3 Warnings

3 posts in this topic

Recommended Posts

Hallo zusammen,

ich habe mir Anfang des Jahres diese Kiste (lt. Signatur) zusammengebaut und erfolgreich ML installiert.

Bisher war ich ohne eigene DSDT ganz zufrieden, denn bisher lief alles problemlos.

Heute musste ich jedoch feststellen, das jegliche PCI/PCIe-Karten ignoriert werden.

Daher habe ich mir den "DSDT Editor Version 0.8" geladen.

Zuerst habe ich das Table mit "Extract" erstellen lassen, dann habe ich zum Beseitigen der Fehler

bzgl. CPU-Tag's den Patch "_T_x rename.txt" drüberlaufen lassen. Nun habe ich in der Statuszeile stehen:

"0 Errors, 3 Warnings, 106 Optimizations"

 

2245 Warning ResourceTag larger than Field (Tag: 64 bits, Field: 32 bits)

2245 CreateDWordField (BUF0, \_SB.PCI0._Y0F._LEN, MSLN)

 

3259 Warning _Reg has no corresponding Region

3259 Method (_REG, 2, NotSerialized)

 

3383 Warning Result is not used, possible operator timeout will be missed

3383 Acquire (MUT0, 0x0FFF)

 

Da ich mir dank fehlerhafter DSDT bereits eine komplette Neuinstallation beschert hatte, möchte ich diesmal etwas vorsichtiger sein!

Wie gehe ich mit diesen Warnungen um, wie bekomme ich sie weg?

In der Liste der Patches wurde ich nicht fündig.

 

Welche Patches muss ich noch zwingend dazupacken?

 

Zum Test sollte es doch reichen, wenn ich die DSDT per boot-cmd-line bekannt mache?

Laut damaliger bitterer Erfahrung werden nach dem Lader der DSDT einige Files im System umgeschrieben.

Welche Verzeichnisse sollte ich mir neben TimeMachine noch mit CCC zur Seite legen, um bei einem Fehler

problemlos zum jetzigen System zurückzukommen???

 

Ich habe das System inzwischen "einigermassen" weit ausgebaut und möchte eine Neuinstallation vermeiden!

 

(ich sehe gerade in der Vorschau meine Signatur nicht...)

Es geht um folgendes System:

 

p8z77-v pro, i7-3770k, 32GB-Ram (Kingston)

512GB SSD OCZ-Vector (ML), 1,5TB SAMSUNG HD154UI (VM's + Data)

 

Ich würde mich freuen, wenn jemand helfen könnte. Besten Dank!

MfG Thm

DSDT.aml.zip

Share this post


Link to post
Share on other sites
Advertisement

Hallo zusammen,

ich bin nun folgendermassen die Warnungen losgeworden, bin mir aber nicht sicher,

ob das der richtige Weg war, da Try&Error nicht immer der richtige Weg ist:

 

2245 Warning ResourceTag larger than Field (Tag: 64 bits, Field: 32 bits)

2245 CreateDWordField (BUF0, \_SB.PCI0._Y0F._LEN, MSLN)

CreateDWordField -> CreateQWordField

 

3259 Warning _Reg has no corresponding Region

3259 Method (_REG, 2, NotSerialized)

Den Block habe ich entfernt.

 

3383 Warning Result is not used, possible operator timeout will be missed

3383 Acquire (MUT0, 0x0FFF)

0x0FFF -> 0xFFFF

 

Nun bin ich die Warnungen los! Die weiteren Fragen bzgl. Rettung bei KP usw. bleiben bestehen.

Was muss ich zwingend zusätzlich mit CCC sichern und wie komme ich zum jetzigen System zurück,

falls was schief läuft?

 

MfG Thm

Share this post


Link to post
Share on other sites

So, da hier keine Reaktion kam, habe ich es gewagt!

Meine Kiste bootet ohne besonderes Zutun mit der dsdt um einiges schneller, als ohne.

 

Das Thema ist also abgehakt - be happy :thumbsup_anim:

 

MfG Thm

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  
Followers 0

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By macinsane
      Update: Now running Mojave! Thanks to mojave2core! Yeah   Still using C2D in 2019!
      Inserted a nice and cheap GT710 that is not relying on nVidias Webdrivers and runs OOB under Mojave.
       
      Nice, seeing High Sierra running on this old but capable system! It rocks with a new ASUS GT1030
       
      Config:
      Gigabyte EP43-DS3L
      Core2Quad Q9300
      6 GB DDR2 RAM
      Asus GT1030 2GB
      Sandisk SSD 128GB
      TP-Link AC1200 Wifi USB
      Inateck KT4006 USB 3.0 PCIe (No boot)
       
      SMBIOS: iMac14,1
      Clover: 4297  4360
       
      A good deal of DSDT editing was necessary to get this machine to boot High Sierra but finally it works flawlessly, even sleep and wake!
      You NEED to have the DSDT put in place for installation because otherwise macOS doesn't recognize the SATA ports.
      There are a few important BIOS settings: SATA hast to be set to AHCI and "native" and HPET has to be run "64-bit", I'd recommend to disable IDE and the serial and parallel port.
      For the GT1030 nVidia Webdrivers are needed, have to boot with nv_disable=1 until you have them installed.
      You have to install Clover in legacy mode because this old fella does not support UEFI.
       
      Only downside: The so often recommended Inateck USB-card isn't recognized by BIOS, so you cannot boot from it. It works perfectly within macOS though, have the ac-Wifi connected to it.
      config.plist.zip
      DSDT.aml.zip
    • By Haive_Music
      Hey guys,
       
      I'm really hoping someone has the experience and ability to help me iron out the last remaining issue on my build.  
       
      The motherboard is: Gigabyte Z370 Aorus Gaming 7 and I'm running a Alpine Ridge thunderbolt card (Revision 2).   I've gotten everything working for the most part with the exception of Thunderbolt hotplug.  This is the last piece of the puzzle.  I've tried so many different DSDT/SSDT's, cable plugged in, and unplugged, without any luck at all. 
      I've managed to get my Focusrite Clarett 8Pre Thunderbolt working and it's showing up under the PCI section.  It works great, until I shut the device off and turn it back on.  I'd really like to try to get this hotplug issue sorted out, but I've had absolutely no luck so far.
       
      I've managed to get the Alpine Ridge NHI and USB controllers showing up in the PCI section too, but for some reason, the USB lists a bunch of ',,,,,,,,' after the name. 
       
       
      I'll be the first to admit - I don't really know a whole lot about what I'm doing with this stuff, but I've attached relevant files in hopes someone more experienced and knowledable can help me get this working.  
       
      Thanks guys!
      config.plist
      DSDT.aml
      John’s iMac.iojones

      SSDT-TB3.aml
    • By neo_fox33
      DSDT patched for GA-Z97x-Gaming 3 V2 NVIDIA
       
      ACPI Specification 6.2a
    • By kylon
      ACPI and Clover config for Acer Aspire v5-571PG intel i5-U IvyBridge
       
       
      Not Working:
      - sd card reader
       
       
      Tested on High Sierra 10.13.6 and Clover EFI 4678
       
       
      Notes:
      Somehow boot Clover EFI.
      You may need to disable UEFI and boot Clover as Legacy with EmuVariable.
      After that, you should install and boot macOS to install clover as legacy in your EFI partition.
      Now disable Secure Boot and enable UEFI Mode. (remove EmuVariable)
      You may need more steps if you are dual-booting with Windows.
       
       
      **To reset your BIOS, power on the pc and hold the power button for about 30-40 seconds or you can short G2101 (RAM SLOT 1)**
       
       
      Feel free to ask for help.
       
      You will need:
      Clover install options: Install in EFI Partition, Install boot0af, Enable OsxAptioFixDrv-64 and script RC Latest Clover config (acerAspirev5-571PG - CCE Bank) from here ATH9KFixup (here) WhateverGreen (here) Rehabman AppleIntelBacklightInjector (here) in L\E + rebuild cache Rehabman Voodoo PS2 Controller (here) Rehabman ACPI Battery Driver (here) vit9696 AppleALC (here) + Lilu (here) Mieze Realtek RTL8111 (here)
    • By kylon
      A big thanks to wegface for teaching me a lot of things.
       
       
      Tested on High Sierra 10.13.6 and Clover EFI 4679
       
      Not Working:
      - realtek sd card reader (pm me if you have a fix)
       
      Notes:
      **CPU patches are disabled, if you are using a locked BIOS you must enable them**
       
      Clover EFI:
      - Install it in UEFI Mode and change your hdd partition table to GPT.
      - You will be able to install ANY OS in EFI mode, even if this pc does not support EFI at all! (No guide available for this)
       
      You will need:
      My unlocked BIOS (OPTIONAL) (here) Latest Clover config from CCE Bank (here) (asus k53sj-kylon) Rehabman AppleIntelBacklightInjector (here) in L\E + rebuild cache Rehabman Voodoo PS2 Controller (here) Rehabman ACPI Battery Driver (here) vit9696 AppleALC (here) + Lilu (here) Mieze Realtek RTL8111 (here) FakeSMC 3.5.1 from Clover EFI source
×