Jump to content
GhostRaider

[GUIDE] 1st Generation Intel HD Graphics QE/CI

2,079 posts in this topic

Recommended Posts

Advertisement

Oh guys, Hello.

So i have an Dell Inspiron N5010 with i5 450m, i have successfully installed Mac OS X Mojave 10.14.4 but i don't know what to do about intel hd graphics(newbie). What kexts should i download? Where i must install them ? Tried to understand your suggests at the topic but i couldn't. Any help would be great for me!

Share this post


Link to post
Share on other sites

Hello there ! so according to this thread  , Someone was able to use Intel HD Graphics & eDP on Dell Latitude E6410 using kexts from OS X 10.6.3.

 

  1. Could this be true ?
  2. Can those kexts be compatible with other OS X Versions ?
  3. Could someone please provide me those two AppleIntelHD* kexts from the OS X 10.6.3 so i can do some tests ?
Edited by Hamza Jeljeli TN

Share this post


Link to post
Share on other sites

For some reason after I roll back the three Frameworks mentioned for 10.14.5 I lose a bunch of menu bar icons and Hackintosh no longer detects qe/ci.  Any thoughts, I’m about to clean install and try again

Share this post


Link to post
Share on other sites
On 6/1/2019 at 2:13 AM, Hamza Jeljeli TN said:

Hello there ! so according to this thread  , Someone was able to use Intel HD Graphics & eDP on Dell Latitude E6410 using kexts from OS X 10.6.3.

 

  1. Could this be true ?
  2. Can those kexts be compatible with other OS X Versions ?
  3. Could someone please provide me those two AppleIntelHD* kexts from the OS X 10.6.3 so i can do some tests ?

You cannot get full graphics acceleration on those Dell E6410/E4310 laptops with 1st gen Intel graphics. You can install OS X/macOS but it'll run with CI only, so don't waste your time. If those could enjoy full graphics acceleration, it'd be known by now (this is 2019...).

Edited by Hervé

Share this post


Link to post
Share on other sites
  • Hello, can somebody help's me?I have Acer Aspire 5733 with Intel core I3 (380m), i delete 1 kext ,i install os but after restar only black screen and reboot

Share this post


Link to post
Share on other sites

what version of osX are you trying to install?

are you using clover boot loader?

Have you tried booting with inject intel = true and platform id = 0x12345678?

Share this post


Link to post
Share on other sites
On 6/9/2019 at 6:15 AM, Rockystar said:

what version of osX are you trying to install?

are you using clover boot loader?

Have you tried booting with inject intel = true and platform id = 0x12345678?

hello,im tried to install el capitan,delete file like in this guide and after instal,reboot nothing happen's,i use clover with inject intel,but dont use platform id,it may help me? please tell me why you use only lion?Thanks for your help

Edited by bor7212

Share this post


Link to post
Share on other sites

reboot inject intel 

platformID 0x12345678

 

will get you to desktop again continue to follow guide. However, you can't do ci only with elcappitan so your laptop must be LVDS to get graphics working properly.

Share this post


Link to post
Share on other sites

I patched my framebuffer in yosemite to enable vga. My monitor res is 1440x900. I used dual link and the rest same as i use for internal. When i installed it and rebooted it worked but one side of the screen appears on the other side. Is it fixable or is it just better to use internal monitor which is single link 1366x768.

Btw did anyone tried mac os catalina? 

https://forums.macrumors.com/threads/macos-10-15-catalina-on-unsupported-macs.2183772/page-37#post-27455096 
Seems that we can have it working.

Thanks in advance

Edited by mrblamz

Share this post


Link to post
Share on other sites

How did you do it? , what did you do?
I read something in macrumors but do not try it because I got a little confused in the process, Thanks

Edited by jgil00

Share this post


Link to post
Share on other sites

1. Create USB flash drive (16GB) with dosdude's macOS Catalina Patcher 1.0b6 or higher
2. Then I have in usb/Applications/Utilities/macOS Post Install/Contents/Resources/videocardpatches/intelarrandalegraphics/  replaced the 5 IntelHD kexts with my 5 patched kexts
3. Then install Catalina from the USB flash drive (two-stage)
4. Then boot again from the USB flash drive and run the post-installer.
5. Then boot Catalina.
finished

Edited by MacPeet

Share this post


Link to post
Share on other sites

What smbios are you using I'm getting rebooted at launched.windowsserver ran for 2 seconds.. right after I get to the grey screen. Everything I've found on this says its inky for a computer that has nvidia graphics or duel gpu. My laptop doesn't have either. Mojave runs fine

Share this post


Link to post
Share on other sites

Please help,

My laptop turn off the screen after every 1 minute even i'm using it.

OSX 10.10.1

CPU: I3-380M

 

Thanks in advance.

Screen Shot 2019-08-22 at 11.28.54 AM.png

Edited by Junko

Share this post


Link to post
Share on other sites
On 7/6/2019 at 6:52 AM, MacPeet said:

1. Create USB flash drive (16GB) with dosdude's macOS Catalina Patcher 1.0b6 or higher
2. Then I have in usb/Applications/Utilities/macOS Post Install/Contents/Resources/videocardpatches/intelarrandalegraphics/  replaced the 5 IntelHD kexts with my 5 patched kexts
3. Then install Catalina from the USB flash drive (two-stage)
4. Then boot again from the USB flash drive and run the post-installer.
5. Then boot Catalina.
finished

 

I could also install the latest Catalina beta on my T410i by putting the statistically patched intelhdgraphics kexts in the usb drive.

 

Everything is fine except the below two points...

1. There's a hard glitch during the load of the intelhdgraphicsfb kext somewhere around 70% of the progress bar. I had it super smooth with the same kexts on Mojave. Do you have similar glitch or is it smooth for you?

 

2. I had wanted to enable SIP so after everything was fine, I enabled SIP (0x00) but then I see the graphics performance reduced, for example clicking the launcher button on the dock to show the apps, there's a delay of a second and is not smooth, this wasn't the case with disabled SIP (0x3e7). 

However, when I checked the kexts loaded in system report, all the intelhdgraphicsfb kexts are loaded. Any explanation why enabling SIP reduced performance or graphics acceleration.

 

Thanks in advance for your answers.

Share this post


Link to post
Share on other sites

I'm not saying that it doesn't work, it works but there's a hard glitch at around 70% apple logo progress bar. I assume the intelhdgraphicsfb loads at this point.

This was smooth in Mojave (with a momentarily black screen and back to apple logo where it resumes the progress). Is it smooth for you in Catalina or a hard glitch?

 

Then my second question is about trying enabling SIP, in which I seem to loose graphics acceleration. The kext seems to be loaded per system report but I loose some transparency and performance. 

Wouldn't enabling SIP considered better for security reasons once the overall hackintosh setup is complete (all patched / custom kexts are installed and working fine)?

Share this post


Link to post
Share on other sites

activated SIP and patched Kext's can not work
it does not fit together
I have full graphics acceleration.
With BluSky patch also bright menu bar.
Apple logo does not help. Use Verbose-Mode -v !!!
Everything is great here.
This may help for unsupported Mac's:

https://forums.macrumors.com/threads/macos-10-14-mojave-on-unsupported-macs-thread.2121473/

https://forums.macrumors.com/threads/macos-10-15-catalina-on-unsupported-macs.2183772/

Share this post


Link to post
Share on other sites

HP Probook 4420s i3-330M
I have successfully installed Mojave 10.14.6 but I can not install it to receive full QE / CI, I get the kext of 10.12 installed, the boot will flash white screen or the screen will only show black gear running continuously .
Get everyone to help install the full QE / CI

Share this post


Link to post
Share on other sites

Hows it going gurus? I know that i may be reaching a bit here but it's good to dream. My question is i'd like to know if it's possible to achieve full sleep/wake function on intel 1st gen. I'm aware that proper dsdt patches will need to be implemented in order to achieve this. Just wanted to know if i can achieve this with my pavilion dv6-2155dx lappy. Laptop goes to sleep just fine, but wakes up to a black screen and nothing could be seen on display.

Share this post


Link to post
Share on other sites
Posted (edited)

I follows the steps in first floor instruction in High Serria. 10.13.6. but failed. it will reboot auto. i cannot get to mac os desktop. I tried Intel HD Graphics QECI Legacy 10.12 all Normal, Alternate and Alternate 2 framebuffer. No one works. frustrated.

my laptop is LVDS and resolutuon is 1366*768, so i use singlelink files.

CPU is i3-390M dual graphics, i used SSDT to disable the discrete ATI graphic.

 

 

 

can anybody give me some suggestions, thanks a lot.

 

 

 

Edited by TingVan

Share this post


Link to post
Share on other sites
Posted (edited)
On 1/3/2020 at 5:03 PM, TingVan said:

I follows the steps in first floor instruction in High Serria. 10.13.6. but failed. it will reboot auto. i cannot get to mac os desktop. I tried Intel HD Graphics QECI Legacy 10.12 all Normal, Alternate and Alternate 2 framebuffer. No one works. frustrated.

my laptop is LVDS and resolutuon is 1366*768, so i use singlelink files.

CPU is i3-390M dual graphics, i used SSDT to disable the discrete ATI graphic.

 

 

 

can anybody give me some suggestions, thanks a lot.

UPDATED:

I download natit.kext and use 5 file from this post.

but i still cannot get to the OS desktop.

so i have to use ig-platform-id: 0x12345678 to get it.

curiously, the os can recognize Intel HD Graphics 128M

 

but no really effective. NO QE/CI.

 

WRONG DIRECTION: I delete natit.kext and edit the dsdt to inject info of Intel HD info.

the frame buffer still not work and will reboot automatically.

boot error:

[IGPU] virtual IOService *IntelAccelerator :: probe(IOService *, SInt32 *): Failed to map device ID:0x468086 to GPU SkU!

 

every time I should use 0x12345678 to get the MacOs desktop.

 

Update:

Today I move OS to Mojave. still no good progress. I found why every time I can get into desktop with 0x12345678, in clover I used there default setting fakeId HD 630 info DVMT. if I check off inject fake HD 630 info, even use 0x12345678, I cannot get to the OS desktop. could someone can give me some help. very appreciated.

 

 

 

屏幕快照 2020-01-11 下午7.10.29.png

屏幕快照 2020-01-15 上午8.52.22.png

Edited by TingVan

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By GhostRaider
      This download is only for users who have a laptop with a 2010 Intel® Arrandale Processor with Intel® HD Graphics:
       
      1st Generation Intel® Core™ Processor with Intel HD Graphics (Arrandale only)
      Intel® Celeron® Processor with Intel® HD Graphics (Arrandale only)
      Intel® Pentium® Processor with Intel® HD Graphics (Arrandale only)
       
      Make sure the Device ID and Vendor ID match with the following:
       
      Device ID: 0042 or 0046
      Vendor ID: 8086
       
      In here you will find my QE/CI and CI only packages for your 1st Generation Intel HD Graphics IGPU for OS X Mountain Lion, OS X Mavericks, OS X Yosemite, OS X El Capitan, macOS Sierra, and macOS High Sierra.
       
      Choose your package:
       
      Download the Intel® HD Graphics QE/CI package if your laptop is using the LVDS connector. This package has the necessary kexts to enable Quartz Extreme with Core Image (QE/CI). This enables full hardware/graphics acceleration.
       
      or
       
      Download the Intel® HD Graphics CI package if your laptop is using the eDP connector. This package enables Core Image (CI) only. This enables partial acceleration.
       
      Note: CI only (CI) is only available on OS X Mavericks 10.9.5 and below. Future releases of macOS requires full graphics acceleration (QE/CI) for optimal performance and stability.
       
      For more information about 1st Generation Intel® HD Graphics, everything is explained in my guide:
       
      http://www.insanelymac.com/forum/topic/286092-guide-1st-generation-intel-hd-graphics-qeci/
    • By jack-69
      DISM is your friend!
       
      Part 1: (For all the computers that don't have UEFI)
       
      Prepare two USB keys, one with El Capitan & one with Windows 10.
      First put the Windows USB, during the installation (when it asked the Windows code) press shift + f10 and will open the command prompt:
      diskpart list disk (list of your hdd) select disk 0 (0 is number of your hdd) clean (ATTENTION clean all your hard disk selected) convert gpt create partition efi size=200 (creates EFI partition) format fs=fat32 label=EFI We made a EFI partition.
      In my Hdd I have 3 partitions ( 1 for Mac, 1 for Windows=Ntfs & 1 in exFat for sharing files between the two systems).
      create partition primary size=100000 (1 partition for Mac OS X 100GB) format fs=fat32 quick label=Mac (after we will format in HFS+ with disk utility) create partition msr size=128 (creates Microsoft Reserved) create partition primary size=100000 (1 partition for Windows 10 100GB) format fs=ntfs quick label=Windows (format in Ntfs) create partition primary (creates a partition with the remaining space) format fs=exfat quick label=Hdd (format in exFat) Now the fun part.
      We should insert the letters for the partitions. Check
      select disk 0 list volume (check the assigned letters, REMINDS the letter assigned to the USB "example d") list partition (check the number of partition EFI "example partition 1") select partition 1 assign letter=h list partition (check the number of partition Windows "example partition 3") select partition 3 assign letter=g exit Then we have the letter "D:\" for the USB, "H:\" for the EFI partition & "G:\" for the Windows partition.
      Now we need to copy the installation files from the USB to the Windows partition.
      cd\windows\system32\ dism /apply-image /imagefile:d:\sources\install.wim /index:1 /applydir:g:\ Break....
      Now we need the Windows EFI boot files.
      cd\ g: bcdboot (check the command line) bcdboot g:\windows /1 en-us /s h: /f UEFI (in my case "/1 It-it") Restart the computer with the Mac USB "Clover bootloader", then select Microsoft EFI and start the installation of Windows 10 in FULL GPT. 
      If you don't see the exFat partition in Windows don't worry.
      (Take a program like Partition Wizard, format the partition in NTFS  and assigns the letter D:\. Now open the command prompt administrator and write:
      diskpart select disk 0 list partition (check the partition before-exFat = after-NTFS "example partition 4") select partition 4 format fs=exfat quick label=Hdd Now you must have the partition exfat visible and writable)
       
       
      Part 2:
       
      Important!  
      Don't format or delete the EFI partition.   
      From the Mac USB we need delete AppleIntelHDGraphicsFB.kext. 
       
      Now we go in to the installation of El Capitan, with disk utility format the partition "Mac" in HFS+ mac journaled, then install Mac OS X.
      While starting El Capitan from your hard drive, we must block AppleIntelHDGraphicsFB.kext and AppleIntelHDGraphics.kext. (& add cpus=1 or patch with clover)
      When El Capitan is started:
      Patch AICPM with Clover Configurator Install Clover like this  (of course without installation El Capitan) "Legacy mode" Replace the config.plist in EFI partition and add SMBIOS with clover configurator - macbook pro 6.1 Put the DSDT Put HFSPlus.efi, NTFS.efi in drivers64 folder Insert and replace all kext PS:During the first system start we must go in the system preferences, keyboard, shortcuts and change the key combination of brightness (f2- f3+).
       
       
      Work:  
       
      Intel Core i5 460M
      Intel HD Graphics                                      (Clean graphics without artifacts)
      Wifi & Ethernet                                          (Atheros AR9285 & Realtek 8111)
      Stereo speakers & Microphone                    (IDT92HD81B1X5)
      Keyboard & multi-touch touchpad
      Memory Card Reader
      Camera
      All USB
      Battery
      Sleep & Wake
      Brightness Values
      App Store
       
      Don't work: 
       
      ATI Mobility Radeon HD 5470                      (Blocked by BIOS)
      FaceTime                                                   (With Rom,SN,MLB valid work)
      iMessage                                                   (With Rom,SN,MLB valid work)
      Maps            
       
       
      Thanks : GhostRider - pokenguyen - Mirone & Micky1979 - RehabMan
       
       
      HP El Cpitan.zip
    • By newbie2379
      Good day,

      I'm trying to install OSX El Capitan on my laptop all the time.
      I have a laptop with a Intel CORE i5 430M Arrandale CPU and first generation Intel HD Graphics.
      The problem is the graphics card.
      I have deleted the kext for the graphics card to install El Capitan.
      After installing it boots also without error messages, but then comes a graphic error. The graphics error was already before I had deleted the Kext before installing.
      The graphics error should not come, however, if I had deleted the kext?

      I can install OSX successfully, but when booting comes a graphic error.

      I have also searched the Internet for solutions. The solutions I had found only work after a successful boot.

      I have tried it with other graphics kext, but without success.

      I also have no other computer with OSX.

      Best regards
×