Recently Browsing 0 members
No registered users viewing this page.
This download is only for users who have a laptop with a 2010 Intel® Arrandale Processor with Intel® HD Graphics:
1st Generation Intel® Core™ Processor with Intel HD Graphics (Arrandale only)
Intel® Celeron® Processor with Intel® HD Graphics (Arrandale only)
Intel® Pentium® Processor with Intel® HD Graphics (Arrandale only)
Make sure the Device ID and Vendor ID match with the following:
Device ID: 0042 or 0046
Vendor ID: 8086
In here you will find my QE/CI and CI only packages for your 1st Generation Intel HD Graphics IGPU for OS X Mountain Lion, OS X Mavericks, OS X Yosemite, OS X El Capitan, macOS Sierra, and macOS High Sierra.
Choose your package:
Download the Intel® HD Graphics QE/CI package if your laptop is using the LVDS connector. This package has the necessary kexts to enable Quartz Extreme with Core Image (QE/CI). This enables full hardware/graphics acceleration.
Download the Intel® HD Graphics CI package if your laptop is using the eDP connector. This package enables Core Image (CI) only. This enables partial acceleration.
Note: CI only (CI) is only available on OS X Mavericks 10.9.5 and below. Future releases of macOS requires full graphics acceleration (QE/CI) for optimal performance and stability.
For more information about 1st Generation Intel® HD Graphics, everything is explained in my guide:
DISM is your friend!
Part 1: (For all the computers that don't have UEFI)
Prepare two USB keys, one with El Capitan & one with Windows 10.
First put the Windows USB, during the installation (when it asked the Windows code) press shift + f10 and will open the command prompt:
diskpart list disk (list of your hdd) select disk 0 (0 is number of your hdd) clean (ATTENTION clean all your hard disk selected) convert gpt create partition efi size=200 (creates EFI partition) format fs=fat32 label=EFI We made a EFI partition.
In my Hdd I have 3 partitions ( 1 for Mac, 1 for Windows=Ntfs & 1 in exFat for sharing files between the two systems).
create partition primary size=100000 (1 partition for Mac OS X 100GB) format fs=fat32 quick label=Mac (after we will format in HFS+ with disk utility) create partition msr size=128 (creates Microsoft Reserved) create partition primary size=100000 (1 partition for Windows 10 100GB) format fs=ntfs quick label=Windows (format in Ntfs) create partition primary (creates a partition with the remaining space) format fs=exfat quick label=Hdd (format in exFat) Now the fun part.
We should insert the letters for the partitions. Check
select disk 0 list volume (check the assigned letters, REMINDS the letter assigned to the USB "example d") list partition (check the number of partition EFI "example partition 1") select partition 1 assign letter=h list partition (check the number of partition Windows "example partition 3") select partition 3 assign letter=g exit Then we have the letter "D:\" for the USB, "H:\" for the EFI partition & "G:\" for the Windows partition.
Now we need to copy the installation files from the USB to the Windows partition.
cd\windows\system32\ dism /apply-image /imagefile:d:\sources\install.wim /index:1 /applydir:g:\ Break....
Now we need the Windows EFI boot files.
cd\ g: bcdboot (check the command line) bcdboot g:\windows /1 en-us /s h: /f UEFI (in my case "/1 It-it") Restart the computer with the Mac USB "Clover bootloader", then select Microsoft EFI and start the installation of Windows 10 in FULL GPT.
If you don't see the exFat partition in Windows don't worry.
(Take a program like Partition Wizard, format the partition in NTFS and assigns the letter D:\. Now open the command prompt administrator and write:
diskpart select disk 0 list partition (check the partition before-exFat = after-NTFS "example partition 4") select partition 4 format fs=exfat quick label=Hdd Now you must have the partition exfat visible and writable)
Don't format or delete the EFI partition.
From the Mac USB we need delete AppleIntelHDGraphicsFB.kext.
Now we go in to the installation of El Capitan, with disk utility format the partition "Mac" in HFS+ mac journaled, then install Mac OS X.
While starting El Capitan from your hard drive, we must block AppleIntelHDGraphicsFB.kext and AppleIntelHDGraphics.kext. (& add cpus=1 or patch with clover)
When El Capitan is started:
Patch AICPM with Clover Configurator Install Clover like this (of course without installation El Capitan) "Legacy mode" Replace the config.plist in EFI partition and add SMBIOS with clover configurator - macbook pro 6.1 Put the DSDT Put HFSPlus.efi, NTFS.efi in drivers64 folder Insert and replace all kext PS:During the first system start we must go in the system preferences, keyboard, shortcuts and change the key combination of brightness (f2- f3+).
Intel Core i5 460M
Intel HD Graphics (Clean graphics without artifacts)
Wifi & Ethernet (Atheros AR9285 & Realtek 8111)
Stereo speakers & Microphone (IDT92HD81B1X5)
Keyboard & multi-touch touchpad
Memory Card Reader
Sleep & Wake
ATI Mobility Radeon HD 5470 (Blocked by BIOS)
FaceTime (With Rom,SN,MLB valid work)
iMessage (With Rom,SN,MLB valid work)
Thanks : GhostRider - pokenguyen - Mirone & Micky1979 - RehabMan
HP El Cpitan.zip
I'm trying to install OSX El Capitan on my laptop all the time.
I have a laptop with a Intel CORE i5 430M Arrandale CPU and first generation Intel HD Graphics.
The problem is the graphics card.
I have deleted the kext for the graphics card to install El Capitan.
After installing it boots also without error messages, but then comes a graphic error. The graphics error was already before I had deleted the Kext before installing.
The graphics error should not come, however, if I had deleted the kext?
I can install OSX successfully, but when booting comes a graphic error.
I have also searched the Internet for solutions. The solutions I had found only work after a successful boot.
I have tried it with other graphics kext, but without success.
I also have no other computer with OSX.