Jump to content
isaac1234

[Guide] - Dell XPS 15z (L511z) - OS X Mountain Lion

40 posts in this topic

Recommended Posts

OS X Mountain Lion 10.8 on Dell XPS 15Z [L511z]

 

I have spent many hours on getting OS X to run smoothly on this laptop and now I’ve done it, I’m going to share what I did, because I ran into many many problems. What’s not working:

* The eSATA/USB 2.0 port works perfectly (haven’t tested eSATA) but the two USB 3.0 ports only work correctly with mass storage and mouse/keyboard. However they do work at USB 3.0 speed.

* Wifi doesn’t work

* Multitouch doesn’t work

* Haven’t bothered trying to get sleep, Bluetooth or card reader to work.

* HDMI out doesn’t work

* You need to boot with -f

 

Backup your entire disk with something like Clonezilla http://clonezilla.org/ because it is easy to mess things up—the first time I installed Lion I accidentally deleted my Windows 7 100mb boot partition and needed to restore it.

 

Feel free to use my DSDT (attached) and kexts. I've given the sources for them where I can. I'm using 10.8 here, best of luck if you have a 10.8.2 install

 

1. Prepare your drive so that you have room for an HFS+ Mac partition. If you’re going to wipe everything, it won’t matter, but if you’re running Windows or Linux then resize your partition. I used GParted. http://gparted.sourc....net/livecd.php Also please note that you must install OS X onto a primary partition and you can only have a maximum of 4. (your Windows installation most likely has a 100mb system reserved partition as the boot partition)

 

2a. Using an OS X machine, prepare the installer. We are doing a completely vanilla install. Follow this guide’s Part 2 http://www.insanelym...-for-beginners/with these variations:

* format the disk as MBR, not GUID (2.A part 5) (Dell BIOS will NOT boot GUID)

* Follow step 2D

Use a MacBook Pro 8,2 SMBIOS.

 

2b. In addition to the suggested kexts, you MUST use a DSDT otherwise you will get a grey striped screen when you’re supposed to get the install GUI. Copy my DSDT (dsdt.aml) into the root directory of the USB drive.

 

(This is my extracted XPS 15z DSDT with a few modifications—the errors and warnings fixed, the DualLink DTGP patch applied, HPET allocations, an audio patch and possibly some other minor things I can’t think of.)

 

You also must use the PS2-Synaptics-Keyboard-32+64 kexts from here http://www.osx86.net..._ps2_32-64.html otherwise the keyboard/trackpad will not work.

 

3. Reboot the machine with the USB drive in the eSATA/USB 2.0 port and a USB mouse in a USB 3 port. Although I have got it to boot with the drive in one of the USB 3.0 ports it’s not worth the hassle. Boot from USB and hopefully you will see Chameleon. Boot the installer with the –v flag.

Hopefully you’ll get into the GUI. If you get a kernel panic, it will be DSDT related—extract your own DSDT and apply the DualLink patch. If you get stuck on “Still waiting for root device”, ensure that you’ve plugged the USB drive into the eSATA/USB2 port.

 

4. Run the install, and when you finish, open up the terminal from Utilities->Terminal. Now we need to copy the extensions and DSDT so we can boot up. Type these (assuming your Mac volume is called OS X)

cp –R /System/Library/Extensions/NullCPUPowerManagement.kext /Volumes/"OS X"/System/Library/Extensions/

cp –R /System/Library/Extensions/FakeSMC.kext /Volumes/"OS X"/System/Library/Extensions/

cp –R /System/Library/Extensions/AppleACPIPS2Nub.kext/ Volumes/"OS X"/System/Library/Extensions/

cp –R /System/Library/Extensions/ApplePS2Controller.kext/ Volumes/"OS X"/System/Library/Extensions/

 

5. Now reboot onto the USB stick but this time select your OS X partition rather than the USB stick. Boot with the -v -f -x flags. You must use the –x flag because the installation will not boot without the safe mode flag at this stage, and I always get the root device error without -f. Don’t know why.

 

6. Fix graphics—whilst in safe mode, go to /System/Library/Extensions and DELETE all nVidia kexts (you can back them up if you want). Also delete AppleIntelHDGraphics.kext. This should fix your graphics issues—I believe the graphics not working are related to the second nVidia graphics card. Reboot back onto the USB stick and select the OS X installation again (don't forget -v -f).

 

7. Install Chameleon or Chimera from within OS X. Also create an SMBIOS like you did before.

You may run into an issue I had with my hard-drive where Chameleon can’t install the boot sector properly. In this case you’ll have to use the Terminal in the install and use this method: http://www.macbreake...oot0-error.html This method didn’t work for me until I unmounted the volume for I ran dd. (Type diskutil unmount “OS X” first.)

 

8. If dual booting, go into Windows and modify your BCD with EasyBCD http://neosmart.net/EasyBCD/ so you can dual boot with OS X.

 

9. If you are having display glitch problems, use an EDID override http://www.insanelym...splay-problems/ and also update to FakeSMC 4.2 – this helped a lot for me.

 

10. Fix USB 3 –install PXHCD.kext from http://www.osx86.net...pxhcd.kext.html Use

Kext Helper to install kexts from now on or copy and then use Disk Utility to repair permissions.

 

11. Fix audio http://www.insanelym...-inspiron-1464/ If you’re using my DSDT, the DSDT patching has already been done.

 

12. Fix Ethernet– AtherosL1cEthernet.kext http://www.osx86.net...ernet.kext.html

 

13. Fix battery— VoodooBattery http://www.osx86.net...ttery_lion.html

 

That’s it! Enjoy, and let me know if you know how to fix any of the rest of the issues.

XPS 15z.zip

Edited by fantomas1
n°11 edited!!!

Share this post


Link to post
Share on other sites
Advertisement

A well written easy to follow guide. Unfortunately I'm stuck at 'Waiting for DSMOS' when first booting from the USB stick but at least that gives me something to research today.

 

Update. Booting 10.8.2. Thanks!

 

I obviously got something wrong as I could only run the installer with -v -f -x. the installation failed, but I installed MacDrive to my Windows, copied the DSDT over and it then booted with -v -f -x fine.

I'm going round in circles trying to get ML and my three Win partitions to all boot nicely, but i'll get there in the end =]

Share this post


Link to post
Share on other sites

Oh dear, this is fantastic! haven't had time since summer to play on this, I had a different approach on the install that started from an earlier version, got stuck at some point and wasn't able to have a decent functioning install... Before I try this I need to get some money and buy me another computer as I am still using this as my main work pc, so I am sorry if questions seems stupid but;

how is the battery handling itself under normal conditions?

did u try the custom bios to undervolt the GC?

cheers buddy

Share this post


Link to post
Share on other sites

well, for me, only the original keyboard & trackpad kexts from the iatkos ML2 installation work. Not the PS2-Synaptics-Keyboard-32+64 kexts.

 

Also, I get a Kernel Panic when using the attached DSDT from your post....

 

:( And I'm still wondering, when we get to see kexts for Nvidia GT 525M and Intel Centrino 6230 WiFi....!!

Edited by stathismes

Share this post


Link to post
Share on other sites

Hey, anyone have any luck with the recently released 10.8.3? I made sure to redelete all the nvidia kexts that we don't need, but bootup hangs. However, I'm able to boot in with safe mode, so I'm pretty sure there's just another kext we need to delete to boot up properly. Here are the kexts I've taken out of SLE so far:

 

AppleIVBVA, GeForce, GeForceGA, GeForceGLDriver, GeForceVADriver, NVDAGF100Hal, NVDAGK100Hal, NVDAN50Hal, NVDAResman, NVDAStartup

Share this post


Link to post
Share on other sites

Hi, sorry haven't checked back here in a while. Have been using my OS X partition a fair bit but have decided I will buy a MBP in the near future because I enjoy the OS so much.

 

 

Oh dear, this is fantastic! haven't had time since summer to play on this, I had a different approach on the install that started from an earlier version, got stuck at some point and wasn't able to have a decent functioning install... Before I try this I need to get some money and buy me another computer as I am still using this as my main work pc, so I am sorry if questions seems stupid but;

how is the battery handling itself under normal conditions?

did u try the custom bios to undervolt the GC?

cheers buddy

 

Battery seems to be handling itself fine. Not sure if the charge is quite as long as in Windows but (without testing much) I'd say it'd be comparable. Slightly unreliable "time til empty" and "time til charged" readings. Have noticed that the CPU meter seems unusually high most of the time but performance doesn't seem to be affected. I can run a pretty heavy Mainstage (live audio) rig with lower latency than Windows without any glitches whatsoever.

 

No BIOS fiddling at all from me-- not quite my thing because I couldn't afford this computer to be unusable.

 

 

well, for me, only the original keyboard & trackpad kexts from the iatkos ML2 installation work. Not the PS2-Synaptics-Keyboard-32+64 kexts.

 

Also, I get a Kernel Panic when using the attached DSDT from yourof post....

 

:( And I'm still wondering, when we get to see kexts for Nvidia GT 525M and Intel Centrino 6230 WiFi....!!

 

Glad to hear that you found away of getting the keyboard & trackpad working. May be that you have a different revision to me. I'm afraid I can't help out with the gfx card or wifi either.

 

Hey, anyone have any luck with the recently released 10.8.3? I made sure to redelete all the nvidia kexts that we don't need, but bootup hangs. However, I'm able to boot in with safe mode, so I'm pretty sure there's just another kext we need to delete to boot up properly. Here are the kexts I've taken out of SLE so far:

 

AppleIVBVA, GeForce, GeForceGA, GeForceGLDriver, GeForceVADriver, NVDAGF100Hal, NVDAGK100Hal, NVDAN50Hal, NVDAResman, NVDAStartup

 

I read about some people having a hairy time on 10.8.3 and haven't braved it. Have you tried booting with -f ? I'm still in the dark why my system won't boot without -f, prior to getting Mountain Lion working I had a semi-stable Lion working which could boot without it.

 

Cheers all, take care.

 

Isaac

Share this post


Link to post
Share on other sites

Hi everyone, I've gone to 10.8.4 and its running well, full dual boot W7, MLion, no flags etc....

Share this post


Link to post
Share on other sites

Hi everyone, I've gone to 10.8.4 and its running well, full dual boot W7, MLion, no flags etc....

I've got it working on 10.8.4 too, even though strangely I could not get 10.8.3 working at all. Just make sure you delete all the unnecessary graphics kexts.

Share this post


Link to post
Share on other sites

Hi Isacc

 

With your -f option have you tried this:

 

Add to your plist file
<key>UseKernelCache</key>
<string>Yes</string>

In Terminal rebuild kext cache:

sudo chown -R root:wheel /System/Library/Extensions/
sudo chmod -755 /System/Library/Extensions/
sudo touch /System/Library/Extensions/

 

try reboot without -f........

Share this post


Link to post
Share on other sites

So all of you are probably using an MBR partition scheme, but for those of you with advanced format hard drives (Isaac I'm assuming you do since you had to do the boot1h fix for making the bootloader work), have you noticed any performance issues while running ML? Mainly I'm thinking about anything where data has to be written to the HD, so in my case recording music. I've noticed it is incredibly slow at times, which I think means that for ML, advanced format HD's do not play well with the MBR partition map. Does anyone else have experience with this?

 

The work around would be a) to get a non-advanced format HD (anyone know any good 1tb models? everything seems to be AFT these days), or to use a GPT partition map, but then you'd constantly have to boot from an MBR-formatted USB/externalHD with a bootloader on it. It's a trade off, but I think going with GPT would eliminate all problems since that would make the hackbook native.

Share this post


Link to post
Share on other sites

but then you'd constantly have to boot from an MBR-formatted USB/externalHD with a bootloader on it. It's a trade off, but I think going with GPT would eliminate all problems since that would make the hackbook native.

You don't if you'd flash an unlocked BIOS with UEFI boot mode enabled and set up Clover UEFI as you bootloader, then you would have your bootloader files on the EFI partition and that's pretty much it.

Share this post


Link to post
Share on other sites

TimeWalker thanks for the tip, could you point us to a source for this BIOS mod and/or guide?

 

I'm also reinstalling from scratch and can get back up to 10.8.2, but when I go to 10.8.4 (both in software update and combo update from Apple's site), I once again can only boot from -x...really frustrating because I previously was able to boot fine. Anyone have any trouble with this too? I've replicated my steps from last time, deleting NV-, ATI-, and AMD- kexts (it seems from before that keeping the AppleIntelHD- kexts is fine), but I'm still only able to safe boot. I have actually completely stripped my system down to only the essential kexts, which I identified using a safe boot and Kext Wizard, yet still I'm only able to safe boot with those minimal kexts. I did notice that on combo update, the installer fails with this error:

 

 

installd[269]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=121 "An error occurred while updating system extension information." UserInfo=0x7fcd371f9d60 {NSUnderlyingError=0x7fcd377b0610 "The operation couldn’t be completed. (kextcache error 71.)", NSLocalizedDescription=An error occurred while updating system extension information., arguments=(
   "-update-volume",
   "/",
   "-Installer"
)} {
   NSLocalizedDescription = "An error occurred while updating system extension information.";
   NSUnderlyingError = "Error Domain=kextcache Code=71 \"The operation couldn\U2019t be completed. (kextcache error 71.)\"";
   arguments =     (
       "-update-volume",
       "/",
       "-Installer"
   );
}
 

 

*EDIT AND SOLUTION: the issue is that booting from a USB causes the updated versions to not boot without -x, for whatever reason you have to boot into chameleon from the internal HD. Thanks to sqishy for confirming this too. GPT disks won't work if you use the method of booting from USB, so I guess I'll be looking into modding my BIOS if I want to get GPT support.

Share this post


Link to post
Share on other sites

I've followed this guide to the T! I've applied and reapplied the steps MULTIPLE times, and every time, I always get the grey screen. I once succeeded with the Apple Boot screen but it remained on the Apple screen for over 30 mins. I've installed OSX on other laptops with ease, but this one is blowing my mind. I even have the modded bios...can someone anyone help me? or point me to another guide that works better....I just dont get it. I've done everything the OP has outlined and I always get the gray screen!! 

Share this post


Link to post
Share on other sites

I've followed this guide to the T! I've applied and reapplied the steps MULTIPLE times, and every time, I always get the grey screen. I once succeeded with the Apple Boot screen but it remained on the Apple screen for over 30 mins. I've installed OSX on other laptops with ease, but this one is blowing my mind. I even have the modded bios...can someone anyone help me? or point me to another guide that works better....I just dont get it. I've done everything the OP has outlined and I always get the gray screen!! 

try this method !! can be works for you  :D  B)

because its Clover bootloader  and is  works to place cameleleon does not work

http://www.osx86.net/files/file/69-os-x-108x-intelbootcd-cloveriso/

Share this post


Link to post
Share on other sites

try this method !! can be works for you  :D  B)

because its Clover bootloader  and is  works to place cameleleon does not work

http://www.osx86.net/files/file/69-os-x-108x-intelbootcd-cloveriso/

I tried it, but i got stuck on the clover boot screen. 

 

try this method !! can be works for you  :D  B)

because its Clover bootloader  and is  works to place cameleleon does not work

http://www.osx86.net/files/file/69-os-x-108x-intelbootcd-cloveriso/

I tried it but clover CD at boot hangs at  cdboot: done7 ANY reason why?

Share this post


Link to post
Share on other sites

I tried it, but i got stuck on the clover boot screen. 

 

I tried it but clover CD at boot hangs at  cdboot: done7 ANY reason why?

 

not like your machine LOL    :P  sorry  ca be  you have better chance with the dvd  

 

here   :)   B)  some laptop needs retail dvd 

 

http://www.osx86.net/files/file/43-dvd-creator-os-x-mountain-lion-pkg/

Share this post


Link to post
Share on other sites

I tried it, but i got stuck on the clover boot screen. 

 

I tried it but clover CD at boot hangs at  cdboot: done7 ANY reason why?

I gotta it to boot and run but after update, I get waiting on root device/. any ideas?

Share this post


Link to post
Share on other sites

Hello again. 

 

I am successfully running dual-boot Windows 8.1 and 10.8.2.

You will find a detailed guide on my personal blog sometime in the future (geekysam.dyndns.info). <=== * blog is off-line at the moment

 

Thanks to this post I became super interested in hackintosh.

Thank you, isaac1234

 

'later

Share this post


Link to post
Share on other sites

Your mic is not working because Dell uses proprietary VB version of 269 codec. Whilst majority if OEMs use classic version of the codec with mic node, that doesn't match Dell's version, hence if you take someone else's patch kext meant for classic codec your mic won't work.

Share this post


Link to post
Share on other sites

Your mic is not working because Dell uses proprietary VB version of 269 codec. Whilst majority if OEMs use classic version of the codec with mic node, that doesn't match Dell's version, hence if you take someone else's patch kext meant for classic codec your mic won't work.

so with that said, are there any workarounds? or it's basically a no go? thanks for the reply

Share this post


Link to post
Share on other sites

Hello guys!

I'm planning to hackintosh mi XPS 15z... Only 2 questions before starting the process...

 

It's been almost a year since this topic was opened. Is wifi still not working? Isn't there a patch or something? and what about HDMI output?

 

It's very important for me to know this, it's my only computer, so I need the wifi connection as the air I breathe (the HDMI is not that important) 

 

And the last thing... is it stable? 

 

Thank you in advance, and thanks for the guide!

 

Regards.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By yehia2amer
      Problem:
      When I Attempt to wake my Machine from sleep, the screen stays black, although the computer is obviously awake !
      This Machine has a 1300W Power Supply So Sleep is Very Useful.
       
      I Tried:
      1) FIX_WAK and FixShutdown as per Clover Wiki.
      2) Although I am using "SAPPHIRE Radeon PULSE RX 580 8GB GDDR5", which Should be completely Supported by Mojave, I Also changed the Part Number to "113-4E353BU-O4E" as per this Guide: http://www.xlr8yourmac.com/archives/feb18/RadeonRX-580_MacPro.html. The GPU is working GREAT without even Clover Inject
      3) Tried to Run this command: disablehibernate.command.zip
      4) Tried darkwake=0 to 10
      5) Disabled wake on USB & Wake on LAN (BIOS)
       
      Logs:
      sudo pmset -g
      System-wide power settings: Currently in use: hibernatemode 0 disksleep 10 womp 0 networkoversleep 0 sleep 0 Sleep On Power Button 1 ttyskeepawake 1 hibernatefile /var/vm/sleepimage autorestart 0 gpuswitch 2 displaysleep 10 pmset -g assertions
      2019-02-19 18:51:04 +0200 Assertion status system-wide: BackgroundTask 1 ApplePushServiceTask 0 UserIsActive 1 PreventUserIdleDisplaySleep 0 PreventSystemSleep 0 ExternalMedia 1 PreventUserIdleSystemSleep 0 NetworkClientActive 0 Listed by owning process: pid 56(powerd): [0x0000001700088000] 00:13:44 ExternalMedia named: "com.apple.powermanagement.externalmediamounted" pid 100(hidd): [0x00000025000980a7] 00:00:00 UserIsActive named: "com.apple.iohideventsystem.queue.tickle.4294968578.17" Timeout will fire in 600 secs Action=TimeoutActionRelease pid 200(mds_stores): [0x0000034e000b8279] 00:00:00 BackgroundTask named: "com.apple.metadata.mds_stores.power" Kernel Assertions: 0x4=USB id=502 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d130000 owner=USB Keyboard id=503 level=255 0x4=USB mod=1/1/70, 2:00 AM description=com.apple.usb.externaldevice.1d120000 owner=Lenovo Optical Mouse Idle sleep preventers: IODisplayWrangler  
      Specs:
      CPU: 2x Xeon E5-2680 v2 2.8GHz Ten Core Processors
      RAM: 128 GB 1333 MHz DDR3 ECC Memory
      GPU: SAPPHIRE Radeon PULSE RX 580 8GB GDDR5
      Chipset: Intel C602
      Audio: Realtek ALC3220 (ALC280) High Definition Audio
      SAS Drive Controllers (RAID): LSI 2308 SATA/SAS 6Gb/s controller with host based RAID 0, 1, 10 (4  
      Network Controller 1: Intel 82579 Gigabit Ethernet controller with Remote Wake UP, PXE and Jumbo frames support
      Network Controller 2: Intel Ethernet Controller I210 
      NEC USB3.0 xHCI Controller: Renesas Electronics uPD720201 & uPD720202
       
      for more info:
       
      Any Help will be appreciated, Thanks !
       
      Send me Yehias-Mac-Pro.zip
    • By yehia2amer
      Dell Precision T7610 Workstation
      Hackintosh GUIDE (Work in Progress)
       
                        
      Introduction: 
      Hi Everyone,
      This Workstation used to be a Beast with Dual CPUs and tons of RAM, I Know it is now normal to get that much cores in a Desktop but it is still a very decent machine for me (As a Programmer), and I thought it would be a good idea to Install MacOS as the Daily Driver Rather than Linux and It turns out to be a very Great Experience (with Some Challenges ).
       
      Specs:
      CPU: 2x Xeon E5-2680 v2 2.8GHz Ten Core Processors RAM: 128 GB 1333 MHz DDR3 ECC Memory GPU: SAPPHIRE PULSE Radeon RX 580 8GD5 Chipset: Intel C602 Audio: Realtek ALC3220 (ALC280) High Definition Audio SAS Drive Controllers (RAID): LSI 2308 SATA/SAS 6Gb/s controller with host based RAID 0, 1, 10 (4  Network Controller 1: Intel 82579 Gigabit Ethernet controller with Remote Wake UP, PXE and Jumbo frames support
      Network Controller 2: Intel Ethernet Controller I210
      NEC USB3.0 xHCI Controller: Renesas Electronics uPD720201 & uPD720202
       
      Working:
      Both "Xeon E5-2680 v2" and all cores with Power Management and P-States (using VoodooTSCSync & ssdtPRGen.sh) ATI Radeon HD 4870 (Vanilla) Realtek ALC3220 (ALC280)  (using VoodooHDA till Now - it is partially working with AppleALC using layout-id 13) LSI 2308 SAS (using AstekFusion2) Intel 82579 Network Controller (Vanilla) Intel I210 Network Controller (IntelMausiEthernet) USB 2.0  
      Not Working:
      NEC USB3.0 xHCI Controller (Renesas Electronics uPD720201 & uPD720202) Sleep  
      https://github.com/yehia2amer/Dell-Precision-T7610-Workstation-Hackintosh-Guide
    • By Teress
      In this Hackintosh tutorial I'm covering all aspects of Dual Boot Windows and macOS. How to avoid problems, best settings, Pros and Cons.
       
    • By itsjamielike
      Hello, I am wondering if somebody could help me, I am new to the whole "Hackintosh" system having been a windows fan boy since the day I remember. I have worked In IT the last 9 years but had very limited interaction with OSX and Hackintosh (Managing to Hackintosh a Fuji laptop back in 2011 but not sure how I managed). 
      I am running a Dell E6420. 
      Intel I5 - 2520M 
      10GB ram 
      250GB Samsung SSD
      Nvidia 4200M 
      Alps touchpad 
      Intel Wifi  ( I am aware I will need to change this) 
      Intel Ethernet 82579
      Unsure on Sound device (But it was working I believe with Voodoo)
      I have tried to download a pre made distro that I got to boot up, and install on to my laptop. I found a similar Dell post online (Maybe for a E8420?) and downloaded their EFI files, I then just copied this to my usb stick and deleted the existing EFI folder. This got me to the set up my account screen when i realised my touchpad didnt work (Would scroll and click but not move) and then using a USB one I then realised that my keyboard (that was working on the install screen now doesnt work). 
      I then reinstalled it but this time choosing customise and selecting some options for installed KEXTS and this then got my laptop to boot and get to the create account screen but this time I didnt have any network connection. 
      Third time lucky.... Well I then installed again but selected the above and network adaptors (I tried the Nvidia options too but this didnt work) and then I was able to create an account, browse the internet and start playing about seeing what I could get to work. 
      I then downloaded some Clover tool and I was trying to download some KEXTs for the touchpad and I was using a KEXT installer.. This then was my downfall after this I then (as I had flashbacks to years ago) when I realised I had then broken it... 
      Eventually tried to reinstall but this time I was getting errors on install, I recreated the boot usb and still got errors, I then tried multiple boots and then I would just get a hang screen after loading "voodoobootps2?" or just kernal panic. 
      When I was trying all this I had my laptop set to UEFI (I believe this was incorrect), and I could only boot my laptop when I had the USB still installed, I would boot and then select "run OSX" this would boot fine, but I could never get it to work fine. I then on multiple times tried to boot using non UEFI and Legacy but I would always get KP and never work, Only booting with UEFI was my best chance.  BIOS Settings had been coppied from dare I say.. a youtube video.. So they could be incorrect. 
      I don't have access to a MAC, I do have a copy ready of HighSierra clean and my "tainted" pre edited version. I was installed the imaging to USB using Transmac. I was using CLOVER. 

       
    • By twikoffin
      Hello. My hardware is:
      AMD Athlon X2 7750 dual-core
      Gigabyte NVIDIA 8400GS 512MB ( [VGA] ,HDMI,DVI)
      Motherboard Gigabyte based on NFORCE without AHCI support (only IDE)
      I have successfully installed Mac OS Yosemite, Mavericks and El Capitan with AppleNFORCEATA.kext
      But I can't use it with Mac OS 10.8, don't know why, it just gives error and my internal HDD's are not appearing in Disk Utility.

       
         
×