Jump to content
Deltac0

HELP TOPIC - for help in OS X Yosemite (10.10) and below

2,848 posts in this topic

Recommended Posts

 

@ SirFoxx, I have also experienced this panic as well, again it always seemed to be something to do with memory, I got this error every time I used multi - beast also, so I stopped using multi - beast.

 

I would say try the anval bootloader instead, I know I tried several different bootloaders from the customize menu before I got a successful first boot.

 

I know its a drag, I must have reinstalled Iatkos 6 or 7 times till I hit the jackpot, you probably don't need the PCIRootUID, I know that I didn't, it was worth a shot though.

 

As I say, it says that if Iatkos installs then you probably can run it, try also selecting the NVEnabler from the graphics options. 

 

Doh, silly me, yes it was anval bootloader plus NVEnabler that gave me my first boot. I am using GraphicsEnabler=Yes now though after editing my AGPM kext.

 

Best wishes.

 

Well, I changed to the anval loader, quoopz kernel, and the Nvidia drivers were installed, and it causes my system to crash whether GE is a Yes or No. Will keep you updated. I don't know what my memory problem is, or if that is the problem. I am not using Multi - beast, nor did I use it since it wouldn't work on my current laptop. Iaktos does install, I guess my problem is finding the magic mix to get everything to work, as per usual. Are there other flags that other people have used to get it to work?

 

edit--here is the latest kernel panic.2013-07-15_00-40-30_184_zpscedf353b.jpg

Share this post


Link to post
Share on other sites
Advertisement

Well, I changed to the anval loader, quoopz kernel, and the Nvidia drivers were installed, and it causes my system to crash whether GE is a Yes or No. Will keep you updated. I don't know what my memory problem is, or if that is the problem. I am not using Multi - beast, nor did I use it since it wouldn't work on my current laptop. Iaktos does install, I guess my problem is finding the magic mix to get everything to work, as per usual. Are there other flags that other people have used to get it to work?

 

edit--here is the latest kernel panic.2013-07-15_00-40-30_184_zpscedf353b.jpg

Hi SirFoxxi, I do not understand why do u use quoopz 10.3.0 kernel.

look here intense  http://www.insanelymac.com/forum/topic/285110-amd-working-builds/  , here we have many examples of install Snow Leopard, Lion and Mountain Lion,  with very many kernels and chipset drivers-downloads.  install the appropriate chipset drivers for your hardware and use Andy Vandijk kernel , see first Post by theconnactic or other user.

or see here for many driver and Tools for hackintosh http://www.osx86.net/

Share this post


Link to post
Share on other sites

Hi SirFoxxi, I do not understand why do u use quoopz 10.3.0 kernel.

look here intense  http://www.insanelymac.com/forum/topic/285110-amd-working-builds/  , here we have many examples of install Snow Leopard, Lion and Mountain Lion,  with very many kernels and chipset drivers-downloads.  install the appropriate chipset drivers for your hardware and use Andy Vandijk kernel , see first Post by theconnactic or other user.

or see here for many driver and Tools for hackintosh http://www.osx86.net/

The quoopz kernel is part of the iatkos install DVD, and I'm super close to getting it to work. I guess I will try another boot loader and see what happens, but I have to download a retail DVD first, which will take most of the day with my internet : /

 

edit: Plus, on the list with the amd working builds, only one person got the fx-8350 to work, and he has an ATI card. I have an Nvidia gtx 295, which has 2 gpu's on the one card, so I don't know how mac osx is going to handle the card. And I'm not willing to buy another video card just to make a working hackintosh.

Share this post


Link to post
Share on other sites

The quoopz kernel is part of the iatkos install DVD, and I'm super close to getting it to work. I guess I will try another boot loader and see what happens, but I have to download a retail DVD first, which will take most of the day with my internet : /

 

edit: Plus, on the list with the amd working builds, only one person got the fx-8350 to work, and he has an ATI card. I have an Nvidia gtx 295, which has 2 gpu's on the one card, so I don't know how mac osx is going to handle the card. And I'm not willing to buy another video card just to make a working hackintosh.

 

Hi SirFoxx, what cpu and motherboard do you have? for CPU FX-8350 , I think it should work fine.

Otherwise, ask Gils, a forum member from France, or inform you here on his website http://hack-my-mac.fr/index.php/forum/48-pc-bureau/28494-tutoriel-amd-fx-buldo

 

or use the tutorial from akimoa, but it is in German --> http://www.root86.org/entry.php/16-AMD-Phenom-Snow-Leopard-10.6.8-Retail-Tutorial-!

 

or the information by theconnactic

 

Post by theconnactic see http://www.insanelymac.com/forum/topic/285110-amd-working-builds/

Snow Leopard 10.6.8, 32-bit kernel from AnV (http://www.osx86.net...do=file&id=1675) with 64-bit user land: take a little while to boot, but shuts down and restart in less than 3 seconds. For using more than 4GB of RAM, i had to use this method: [GUIDE] Use more than 4gb RAM on AMD with 32 and 64 bit apps ..., bootflags: legacy_kernel arch=i386 -force64, GraphicsEnabler=Y, npci=0x2000;

 

it is very important to install the tool SystemInfo on your main operating system  (Windows version or Linux version), then upload the picture of your installed hardware here,  there you will get more detailed information of your hardware with vendor-ID and device-ID, which simplifies us to help you.

Driver for Nvidia GTX 295 ( SnowLeopard 10.6 or higher)  look here --> http://www.osx86.net/view/970-gtx295_singlepcb_for_10.6.5_and_above.html

Edited by spakk

Share this post


Link to post
Share on other sites

Well, I changed to the anval loader, quoopz kernel, and the Nvidia drivers were installed, and it causes my system to crash whether GE is a Yes or No. Will keep you updated. I don't know what my memory problem is, or if that is the problem. I am not using Multi - beast, nor did I use it since it wouldn't work on my current laptop. Iaktos does install, I guess my problem is finding the magic mix to get everything to work, as per usual. Are there other flags that other people have used to get it to work?

 

edit--here is the latest kernel panic.2013-07-15_00-40-30_184_zpscedf353b.jpg

Sorry it is being a pig, It did take me several attempts to get it to work, when you install Iatkos use only the boot flag -v, watch its progress as it boots, see if you can glean any information as to what it is using in order to get the install disc to boot and load. Dont use any other boot flags for the initial install.

 

I dont think Nvidia card is a problem, although the PCIRootUID=0 that you describe, ie blackscreen, then shut down does suggest graphics card issue, my PCIRootUID is 0 as well which is the default for the install as far as I am aware. Dont use the GraphicsEnabler boot flag as yet. The last thing to initialise on my boot is the graphics card.

 

Ideally you should be seing, cpu items first, then fake SMC, then blacklisted profiles being avoided, RTC,  then PCI config, finding hard drive for boot, internet, more blackilisted options and then the graphics card, this is the order of things loading on my succesful boots.

 

It seems to me that maybe this is a chipset issue rather than a processor or graphics issue, it may need a chipset driver, my board has an Nvidia chipset which I think has helped with the install on mine.

 

But dont be fooled, it took me four days of trying allsorts to get there, sometimes the same boot flags produce different results, I have had a kernel panic one minute then successful boot the next. It is a hard thing to do, everything Mac is Intel normally.

Share this post


Link to post
Share on other sites

@SirFoxx

another way to Install SnowLeopard:
Download the Nawcom Mod v0.3 CD see here --> http://www.osx86.net/view/586-nawcom_mod_cd_v0.3.html , than  create a bootable CD.
Then set the correctly bios settings.
Then restart your PC with the MOD CD, after the MOD CD is successfully launched, take it out from the DVD Drive  and put the iATKOS DVD in the DVD Drive and press the F5 key and boot the iatkos DVD with this boot flag:  rd(0,0)/Extra/modbin_kernel -force64 -v -f
So u can boot the iatkos Install DVD and perform the installation.
 

Share this post


Link to post
Share on other sites

@SirFoxx

another way to Install SnowLeopard:

Download the Nawcom Mod v0.3 CD see here --> http://www.osx86.net/view/586-nawcom_mod_cd_v0.3.html , than  create a bootable CD.

Then set the correctly bios settings.

Then restart your PC with the MOD CD, after the MOD CD is successfully launched, take it out from the DVD Drive  and put the iATKOS DVD in the DVD Drive and press the F5 key and boot the iatkos DVD with this boot flag:  rd(0,0)/Extra/modbin_kernel -force64 -v -f

So u can boot the iatkos Install DVD and perform the installation.

 

Tried what you said, I couldn't even get to the installer. Once it loads everything, the screen goes black and the monitor goes to power saver mode. When I just booted to the iAtkos CD and went from there, I could at least install the OS, but couldn't get the OS to boot. Any Ideas?

 

edit--just got the installer to work with the retail version of mac OSX...lets see how things go from here. As for flags, I think I used rd(0,0)/Extra/modbin_kernel -force64 maxmem=4096 busratio=20 -v -f

 

FINALLY!!! Got it to boot using -force64 maxmem=4096 busratio=20 -v -f. It did install my ethernet drivers, but apparently it did not recognize them, or they are incompatible with my network chip, so that is my first step, is getting internet to work. Sound kinda works, but I'm not going to worry about that right now.

Share this post


Link to post
Share on other sites

Tried what you said, I couldn't even get to the installer. Once it loads everything, the screen goes black and the monitor goes to power saver mode. When I just booted to the iAtkos CD and went from there, I could at least install the OS, but couldn't get the OS to boot. Any Ideas?

 

edit--just got the installer to work with the retail version of mac OSX...lets see how things go from here. As for flags, I think I used rd(0,0)/Extra/modbin_kernel -force64 maxmem=4096 busratio=20 -v -f

 

FINALLY!!! Got it to boot using -force64 maxmem=4096 busratio=20 -v -f. It did install my ethernet drivers, but apparently it did not recognize them, or they are incompatible with my network chip, so that is my first step, is getting internet to work. Sound kinda works, but I'm not going to worry about that right now.

Glad you got something working, it does seem that success in this is a try everything and anything approach.

 

You may still find some helpful hints from my previous posts in terms of getting graphics and sound etc to work and also about modifying kexts and preserving the Mac_kernel that you need.

 

The process is obviously going to be different now as you have had to approach it a differnet way, but the Nvidia graphics options, editing the AGPM and the chameleon bootloader update may still be relevant in the future.

 

Best wishes and good luck.

Share this post


Link to post
Share on other sites

Please help! Can I run Mountain Lion on my configuration:

 

OS - Mac OS X Lion 10.7.5
CPU - DualCore AMD Athlon 64 X2 4200+, 2200 MHz
MB - Asus M2N-E (nVIDIA nForce 570 SLI, AMD Hammer)
RAM - 2 x 512M DDR2 667 MHz + 2 x 1024Mb DDR2 800 MHz
VIDEO - nVidia GeForce 7600GT 256Mb 
HDD - 1Tb Hitachi HDS721010CLA + 320Gb WDC WD32 00AAKS-00SBA
ODD - HL-DT-ST DVDRAM GH22LS50
SOUND - Analog Devices AD1988B
LAN - Gigabit Ethernet Realtek RTL8111C
WiFi - Airport Extreme Atheros AR5BXB112

 

my graphic card support only 32bit!!

Share this post


Link to post
Share on other sites

Nearly have a perfect Lion 10.7.5 running with GeForce 8800GT, and using "lion kernel update 3", all seems good, one last problem.

 

If I plug in an extra monitor the system freezes immediatly, and also it only boots up to a blank white/grey screen with two monitors. Is there a fix for this?

Share this post


Link to post
Share on other sites

I know I made a mistake trying to install OSX on an AMD machine, but I've spent so many hours (around 12) of troubleshooting, I feel like I'm already too deep in. I'm finally ready to ask for help.

 

I have tried 3 different versions of Niresh, and iAtkos and I've still not figured this out. I'm not even getting kernel panics, or error screens, my PC is just restarting. I managed to install an older version of iAtkos (Like 10.5.7) to a virtual machine, and that's the closest I've gotten.

 

I've tried the flags: amd, "Kernel Cache"=\amd arch=i386, colors=32, cpus=1, graphicsenabler=yes, graphicsenabler=no, maxmem=4096

 

9/10 times I just get a restart. The words that flash on the screen are far too fast for me to notice. I've enabled AHCI (which I don't think would have any effect at this stage anyway), my bios screen is a bit different from what I see most guides for, but I feel like I have everything disabled that needs to be. I have one of the newer bios screens so if I'm missing something, that may be it. I can't get it to install on a virtual machine either so I doubt that's the issue.

The times I do get an error message it's the memory allocation one (Usually due to a flag I was just trying) or on the virtual machine I'll occasionally get "tsc_init: EFI not supported!"

 

I'm going to ad my PC specs in my signature, but for now I'll post them in this post.

AMD FX-8120 (I do have it overclocked a little bit with AMD overdrive, I don't know if this would effect it? I actually just realized.)

ASRock 990FX Exreme4

16 Gigs of DDR3

AMD Radeon HD 7870

 

 

 

EDIT: Here is a video of what typically happens.

 

Edited by cXm0d

Share this post


Link to post
Share on other sites

I've recently used myhack, and a retail 10.8.3, with an AMD kernel that was confirmed to work with my setup. I got it to install, I just can't get it to boot. It always gives me the "Memory allocation error0xdeadbeef" no matter what flag. I read amongst the jibbersh the word "ATI" so it may have something to do with my card? I'm aware my card has limited to no support for this OS, but someone else said they used the same kernel and was able to get it to boot. With graphical glitches.

Share this post


Link to post
Share on other sites

You need MyHack and retail, period - it's not a holier than thou instance, it's because Niresh's content is old and it's very very deprecated by now. Won't work.

 

So you need a retail copy, to which you'll add one of the latest Lion kernels for AMD - search in Insanelymac's downloads section. Place it at the root of your installer and after installation, in the root of your HDD, renaming it as amd_kernel. Because of you graphics card, which only work with Mountain Lion 10.8.3 +, never with Lion, and even with Mountain Lion it needs workarounds, you'll have also to delete all AMD Radeon kexts from the installer and from the final installation too. Boot with  amd_kernel arch=i386 -v -f npci=0x2000 and that of course means you won't have graphics acceleration or even proper resolution, which imho cripples OSX's user experience badly. My advice? Buy a HD5450 Silent (has to be silent, preferentially Sapphire) because they're very cheap and will work with a couple of easy kext edits with both Lion and Mountain Lion - flawlessly with Lion, with tolerable glitches under Mountain Lion. 

 

All the best!

Share this post


Link to post
Share on other sites
Hi

 

My PC spec is:

 

CPU: AMD X4 955 

MOBO: ASUS M5A78L/USB3 

RAM: 4Gb DDR3 1600MHz 

GPU: HD6770 flashed to HD5770 

 

System installed on this PC was 10.7.5. (iAtkos L2 + Combo to 10.7.5 )

 

Added kexts by me:

 

-VooDooHDA 

-Lnx2Mac (for ethernet controller) 

 

My PC is identify like iMac 12.1.

 

Verbose Mode:

2iw0ry8.jpg

 

Boot flags:

2cncymq.jpg

 

No Still waiting for root device.

 

 

Please, help !

Share this post


Link to post
Share on other sites

 

Hi
 
My PC spec is:
 
CPU: AMD X4 955 
MOBO: ASUS M5A78L/USB3 
RAM: 4Gb DDR3 1600MHz 
GPU: HD6770 flashed to HD5770 
 
System installed on this PC was 10.7.5. (iAtkos L2 + Combo to 10.7.5 )
 
Added kexts by me:
 
-VooDooHDA 
-Lnx2Mac (for ethernet controller) 
 
My PC is identify like iMac 12.1.
 
Verbose Mode:
2iw0ry8.jpg
 
Boot flags:
2cncymq.jpg
 
No Still waiting for root device.
 
 
Please, help !

 

you have two npci settings, and try usblegacy=off

 

<key>USBLegacyOff</key>

<string>Yes</string>

Share this post


Link to post
Share on other sites
Definitely try arch=i386.  If that doesn't work, then look at other things.

 

In Sannti's pictures, I notice a few things.

 

The next to last line says the "System bootstrapper has crashed" when called by "launchd".  You aren't going anywhere until that is fixed.

 

The 5 lines right above that talk about launchd trying to load a library in the CoreFoundation framework and failing.  And that probably leads to the crash.

 

Then, the next 4 lines above that talk about an hfs corruption on the hard drive.  And a few lines above that, the journal (jnl) is flagging an unknown device.

 

The only recommendation I can make from all of that is potentially needing a reinstallation.  Something is wrong with the CoreFoundation framework and that needs to be fixed.  In addition, I would be suspicious of a possible corruption on your hard drive.

 

I agree that there are two "npci" settings in the Boot.plist and that should be cleaned up, but it seems to get past the PCI configuration step successfully, so I don't think that is the problem.

 

Also, the error message about USB I've seen before, and maybe setting "usblegacy" to "off" will get rid of the error, but again, I don't think that is the main problem.

Share this post


Link to post
Share on other sites

You need MyHack and retail, period - it's not a holier than thou instance, it's because Niresh's content is old and it's very very deprecated by now. Won't work.

 

So you need a retail copy, to which you'll add one of the latest Lion kernels for AMD - search in Insanelymac's downloads section. Place it at the root of your installer and after installation, in the root of your HDD, renaming it as amd_kernel. Because of you graphics card, which only work with Mountain Lion 10.8.3 +, never with Lion, and even with Mountain Lion it needs workarounds, you'll have also to delete all AMD Radeon kexts from the installer and from the final installation too. Boot with  amd_kernel arch=i386 -v -f npci=0x2000 and that of course means you won't have graphics acceleration or even proper resolution, which imho cripples OSX's user experience badly. My advice? Buy a HD5450 Silent (has to be silent, preferentially Sapphire) because they're very cheap and will work with a couple of easy kext edits with both Lion and Mountain Lion - flawlessly with Lion, with tolerable glitches under Mountain Lion. 

 

All the best!

So even if I went with a Lion install, I'd still be out of luck with this card? I mean I doubt I'd even want to run it if I can't get close to full support.

Share this post


Link to post
Share on other sites

Alright I'll look into buying one of those if I end up really, really wanting it instead of waiting for support.

 

I also have an old 8800 GTX Ultra, would this work?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By anokic
      I have been using clover to install and configuration my Hackintosh High Sierra 10.13.6. It's been a struggle and a pain. Can't restart/shutdown/wake from sleep. Random freezes. When freeze happens mouse works but in loading state. UI and open apps freeze not the mouse. I can make the apps smaller and move them.

      I haven't used any DSDT nor SSDT. Tried 5 or 6 of them from others but sometimes i end up not booting. Could someone explain me do i even need them and why? Do i need DSDT or SSDT or both?

      I'm going to try to install everything OpenCore. The first thing is i can't use a method that needs an internet while installing MacOS cause my ethernet/internet only works when i install MacOS. So i can't use the images i need full installation. Okay i have the full installation for 10.13.6. I need to use a version 10.13.4-6 versions cause application Sketch needs the newer one High Sierra 10.13.4++ version.

      Can you tell me? Can i use same kexts from Clover on OpenCore? Secondly how can i install full USB MacOS installer? (High Sierra 10.13.6 version i have is 7gb i think thats it)
      Is there a version of AMDHigh Sierra version made from the community for 10.13.4++ version?
      If i use the normal 10.13.6 High Sierra should i use this AMD 10.13.6 Kernel when i have installed the MacOS or some other kernel that's better for my system? https://github.com/Shaneee/AMD-High-Sierra-XNU/releases
      Whats the best version of High Sierra to use for Ryzen and Nvidia system?

      Will it be better to use OpenCore?

      Specs:
      Mortar Max B450M
      Ryzen 2600x
      Nvidia GTX 1060
      16gb DDR4 2400mhz
    • By dasca.thea
      Hi everyone,

      I have run into a frustrating problem here.

      My hardware:
      MSI x399 Meg Creation
      2990WX
      64GB ram @2933Mhz
      Radeon 7
      Sata: Samsung 130GB SSD
      M.2: Samsung 970 Pro 1TB(latest firmware)

      Using OpenCore 0.5.6
      (NVMeFix NVMeDxe installed)
      I have successful installed OSX catalina onto my 130GB. It works flawlessly.

      and then I figure I should do it on my M.2 drive. It installs flawlessly, at the last stage of installation, it naturally restart and thats it.
      I can not boot into this newly installed OS on the M.2 drive. it keeps throwing: "error loading kernel cache 0x1"

      I have tried deleting the prelinkedkernel from recovery partition. Tried rebuilding cache(I have not installed any kext into L/E).

      All this time, I can use the same boot USB to boot into catalina on my sata 130Gb SSD working just fine.
       
      attached is my EFI folder. I have tried all the suggested SMBios iMacPro1,1 MacPro6,1 MacPro7,1
       
      is this ruled out that samsung 970Pro doesnt work?
      Please help. 
       
       
      EFI.zip
    • By D3s0lat0r
      Greetings to the Forum,
      i recently followed a guide on hackintosh,and also i am complete noob in this field.
      all is working great, as i am using macpeets codec with layout id=18 cause i like to manually switch to my headphones.
      only one thing doesnt work and its my mic. I tried all the layout ids but no luck.
      i am using ASROCK Fatal1ty b450 k4 with amd r5 2600.
      wich has alc 892.
      Can you please help me? Thank you very much
    • By BlitzPanzer
      Catalina 10.15.3, OC 0.5.5

      Follow the OpenCore AMD Vanilla Guide, everything works fine iMessage, Siri, FaceTime, Continuity, Airdrop, Audio, WiFi
      But here is the problem
      Once I restart or shutdown and reboot, I will have kernel panic, so i have to reboot once again, then no more kernel panic, straight back to the system.
      Down below are the 3 kernel panic reports I got after I am back to the system, also provided specs, kexts, drivers and config.plist I used.
      Please someone help me with the problem
      Thanks in advanced   

      System Specs
      CPU: Ryzen R5 3600
      MOBO: MSI B450 Mortar Max
      RAM: Kingston HyperX Fury 16GB*2 3200MHz DDR4
      SSD: Kingston A2000 500GB NVMe PCIe
      GPU: Gigabyte RX 570 Gaming 4G v2.0
      PCIe: BCM943602CS Kexts:
      AppleALC
      AppleMCEReporterDisabler
      BrcmBluetoothInjector
      BrcmPatchRAM3
      HDMIAudio
      Lilu
      MacProMemoryNotificationDisabler
      NightShiftUnlocker
      NVMeFix
      RealtekRTL8111
      VirtualSMC
      WhateverGreen Drivers:
      ApfsDriverLoader
      AppleUsbKbDxe
      FwRuntimeServices
      VBoxHfs config.plist:
      https://drive.google.com/file/d/1M22Tvn7W-Zf_b_-J52oLcfjECj5qAcp6/view

      Kernel Panic Report 1
      panic(cpu 0 caller 0xffffff801b8652fa): Kernel trap at 0xffffff7f9f212fe3, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0xffffffa3ce87c000, CR3: 0x00000000263ba000, CR4: 0x00000000003406e0 RAX: 0xffffffa3ce87c000, RBX: 0x0000000000005434, RCX: 0x0000000002000000, RDX: 0x0000000003000000 RSP: 0xffffffa3ce75bb60, RBP: 0xffffffa3ce75bb80, RSI: 0xffffff806d3141c0, RDI: 0x0000000000000000 R8: 0x0000000000000001, R9: 0x0000000000000026, R10: 0x00000000f8000000, R11: 0x0000000000000070 R12: 0xffffff805cc7c900, R13: 0xffffff835806f000, R14: 0x0000000000000000, R15: 0xffffff8068d2da50 RFL: 0x0000000000010246, RIP: 0xffffff7f9f212fe3, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0xffffffa3ce87c000, Error code: 0x0000000000000002, Fault CPU: 0x0, PL: 0, VF: 1 Backtrace (CPU 0), Frame : Return Address 0xffffffa3ce75b5c0 : 0xffffff801b73bb2b mach_kernel : _handle_debugger_trap + 0x47b 0xffffffa3ce75b610 : 0xffffff801b8734d5 mach_kernel : _kdp_i386_trap + 0x155 0xffffffa3ce75b650 : 0xffffff801b864f4e mach_kernel : _kernel_trap + 0x4ee 0xffffffa3ce75b6a0 : 0xffffff801b6e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffffa3ce75b6c0 : 0xffffff801b73b217 mach_kernel : _DebuggerTrapWithState + 0x17 0xffffffa3ce75b7c0 : 0xffffff801b73b5fb mach_kernel : _panic_trap_to_debugger + 0x21b 0xffffffa3ce75b810 : 0xffffff801bed2aa9 mach_kernel : _panic + 0x61 0xffffffa3ce75b880 : 0xffffff801b8652fa mach_kernel : _sync_iss_to_iks + 0x2aa 0xffffffa3ce75ba00 : 0xffffff801b864ff8 mach_kernel : _kernel_trap + 0x598 0xffffffa3ce75ba50 : 0xffffff801b6e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffffa3ce75ba70 : 0xffffff7f9f212fe3 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4readEj + 0x53 0xffffffa3ce75bb80 : 0xffffff7f9f24a795 com.apple.kext.AMDRadeonX4000 : __ZN28AMDRadeonX4000_AMDVIHardware19getRegisterAperSizeEv + 0x23 0xffffffa3ce75bba0 : 0xffffff7f9f212ef0 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4initEP11IOPCIDeviceP30AMDRadeonX4000_IAMDHWInterface + 0xfa 0xffffffa3ce75bbe0 : 0xffffff7f9f2325c1 com.apple.kext.AMDRadeonX4000 : __ZN26AMDRadeonX4000_AMDHardware4initEP11IOPCIDeviceP28AMDRadeonX4000_IAMDHWHandlerRjP16_GART_PARAMETERSP14_FB_PARAMETERS + 0x257 0xffffffa3ce75bc30 : 0xffffff7f9f1b8adb com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator17createHWInterfaceEP11IOPCIDevice + 0x7b 0xffffffa3ce75bc70 : 0xffffff7f9f1b64be com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator15configureDeviceEP11IOPCIDevice + 0x10a 0xffffffa3ce75bd00 : 0xffffff7f9f128534 com.apple.iokit.IOAcceleratorFamily2 : __ZN22IOGraphicsAccelerator25startEP9IOService + 0x21e 0xffffffa3ce75bd80 : 0xffffff7f9f1b488e com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator5startEP9IOService + 0x82 0xffffffa3ce75bde0 : 0xffffff801be1b216 mach_kernel : __ZN9IOService14startCandidateEPS_ + 0xf6 0xffffffa3ce75be40 : 0xffffff801be1adc1 mach_kernel : __ZN9IOService15probeCandidatesEP12OSOrderedSet + 0xb21 0xffffffa3ce75bef0 : 0xffffff801be1a10e mach_kernel : __ZN9IOService14doServiceMatchEj + 0x2ce 0xffffffa3ce75bf50 : 0xffffff801be1c8ad mach_kernel : __ZN15_IOConfigThread4mainEPvi + 0x15d 0xffffffa3ce75bfa0 : 0xffffff801b6e213e mach_kernel : _call_continuation + 0x2e Kernel Extensions in backtrace: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f9f0f0000->0xffffff7f9f1b2fff dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[A243D030-19AC-30AA-AC70-6C786DF9E6CE]@0xffffff7f9c185000 dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9c2f8000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f9d454000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9df73000 dependency: com.apple.iokit.IOReportFamily(47)[988360A2-2E10-3014-A119-BE81BC045A10]@0xffffff7f9c228000 com.apple.kext.AMDRadeonX4000(3.0.5)[5FD7AE5F-C03C-34A1-803F-ACA9B68524D0]@0xffffff7f9f1b3000->0xffffff7f9f6f7fff dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9c2f8000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f9d454000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9df73000 dependency: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f9f0f0000 BSD process name corresponding to current thread: kernel_task Boot args: debug=0x100 keepsyms=1 alcid=1 -v shikigva=128 Mac OS version: 19D76 Kernel version: Darwin Kernel Version 19.3.0: Thu Jan 9 20:58:23 PST 2020; root:xnu-6153.81.5~1/RELEASE_X86_64 Kernel UUID: A8DDE75C-CD97-3C37-B35D-1070CC50D2CE Kernel slide: 0x000000001b400000 Kernel text base: 0xffffff801b600000 __HIB text base: 0xffffff801b500000 System model name: MacPro7,1 (Mac-27AD2F918AE68F61) System shutdown begun: NO Panic diags file available: NO (0xe00002bc) System uptime in nanoseconds: 47565362999  
      Kernel Panic Report 2
      panic(cpu 10 caller 0xffffff801b8652fa): Kernel trap at 0xffffff7f9e629fe3, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0xffffff83d25d2000, CR3: 0x0000000029068000, CR4: 0x00000000003406e0 RAX: 0xffffff83d25d2000, RBX: 0x0000000000005434, RCX: 0x0000000002000000, RDX: 0x0000000003000000 RSP: 0xffffff83d14c3b60, RBP: 0xffffff83d14c3b80, RSI: 0xffffff805f6adb80, RDI: 0x0000000000000000 R8: 0x0000000000000001, R9: 0x0000000000000026, R10: 0x00000000f8000000, R11: 0x0000000000000070 R12: 0xffffff805fba2580, R13: 0xffffff835b02e000, R14: 0x0000000000000000, R15: 0xffffff80631191e0 RFL: 0x0000000000010246, RIP: 0xffffff7f9e629fe3, CS: 0x0000000000000008, SS: 0x0000000000000010 Fault CR2: 0xffffff83d25d2000, Error code: 0x0000000000000002, Fault CPU: 0xa, PL: 0, VF: 1 Backtrace (CPU 10), Frame : Return Address 0xffffff83d14c35c0 : 0xffffff801b73bb2b mach_kernel : _handle_debugger_trap + 0x47b 0xffffff83d14c3610 : 0xffffff801b8734d5 mach_kernel : _kdp_i386_trap + 0x155 0xffffff83d14c3650 : 0xffffff801b864f4e mach_kernel : _kernel_trap + 0x4ee 0xffffff83d14c36a0 : 0xffffff801b6e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffff83d14c36c0 : 0xffffff801b73b217 mach_kernel : _DebuggerTrapWithState + 0x17 0xffffff83d14c37c0 : 0xffffff801b73b5fb mach_kernel : _panic_trap_to_debugger + 0x21b 0xffffff83d14c3810 : 0xffffff801bed2aa9 mach_kernel : _panic + 0x61 0xffffff83d14c3880 : 0xffffff801b8652fa mach_kernel : _sync_iss_to_iks + 0x2aa 0xffffff83d14c3a00 : 0xffffff801b864ff8 mach_kernel : _kernel_trap + 0x598 0xffffff83d14c3a50 : 0xffffff801b6e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffff83d14c3a70 : 0xffffff7f9e629fe3 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4readEj + 0x53 0xffffff83d14c3b80 : 0xffffff7f9e661795 com.apple.kext.AMDRadeonX4000 : __ZN28AMDRadeonX4000_AMDVIHardware19getRegisterAperSizeEv + 0x23 0xffffff83d14c3ba0 : 0xffffff7f9e629ef0 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4initEP11IOPCIDeviceP30AMDRadeonX4000_IAMDHWInterface + 0xfa 0xffffff83d14c3be0 : 0xffffff7f9e6495c1 com.apple.kext.AMDRadeonX4000 : __ZN26AMDRadeonX4000_AMDHardware4initEP11IOPCIDeviceP28AMDRadeonX4000_IAMDHWHandlerRjP16_GART_PARAMETERSP14_FB_PARAMETERS + 0x257 0xffffff83d14c3c30 : 0xffffff7f9e5cfadb com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator17createHWInterfaceEP11IOPCIDevice + 0x7b 0xffffff83d14c3c70 : 0xffffff7f9e5cd4be com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator15configureDeviceEP11IOPCIDevice + 0x10a 0xffffff83d14c3d00 : 0xffffff7f9e52a534 com.apple.iokit.IOAcceleratorFamily2 : __ZN22IOGraphicsAccelerator25startEP9IOService + 0x21e 0xffffff83d14c3d80 : 0xffffff7f9e5cb88e com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator5startEP9IOService + 0x82 0xffffff83d14c3de0 : 0xffffff801be1b216 mach_kernel : __ZN9IOService14startCandidateEPS_ + 0xf6 0xffffff83d14c3e40 : 0xffffff801be1adc1 mach_kernel : __ZN9IOService15probeCandidatesEP12OSOrderedSet + 0xb21 0xffffff83d14c3ef0 : 0xffffff801be1a10e mach_kernel : __ZN9IOService14doServiceMatchEj + 0x2ce 0xffffff83d14c3f50 : 0xffffff801be1c8ad mach_kernel : __ZN15_IOConfigThread4mainEPvi + 0x15d 0xffffff83d14c3fa0 : 0xffffff801b6e213e mach_kernel : _call_continuation + 0x2e Kernel Extensions in backtrace: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f9e4f2000->0xffffff7f9e5b5fff dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[A243D030-19AC-30AA-AC70-6C786DF9E6CE]@0xffffff7f9c3f1000 dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9c4a6000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f9e4c1000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9c793000 dependency: com.apple.iokit.IOReportFamily(47)[988360A2-2E10-3014-A119-BE81BC045A10]@0xffffff7f9c09f000 com.apple.kext.AMDRadeonX4000(3.0.5)[5FD7AE5F-C03C-34A1-803F-ACA9B68524D0]@0xffffff7f9e5ca000->0xffffff7f9eb0efff dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9c4a6000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7f9e4c1000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9c793000 dependency: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7f9e4f2000 BSD process name corresponding to current thread: kernel_task Boot args: debug=0x100 keepsyms=1 alcid=1 -v shikigva=128 Mac OS version: 19D76 Kernel version: Darwin Kernel Version 19.3.0: Thu Jan 9 20:58:23 PST 2020; root:xnu-6153.81.5~1/RELEASE_X86_64 Kernel UUID: A8DDE75C-CD97-3C37-B35D-1070CC50D2CE Kernel slide: 0x000000001b400000 Kernel text base: 0xffffff801b600000 __HIB text base: 0xffffff801b500000 System model name: MacPro7,1 (Mac-27AD2F918AE68F61) System shutdown begun: NO Panic diags file available: NO (0xe00002bc) System uptime in nanoseconds: 38416992755  
      Kernel Panic Report 3
      panic(cpu 8 caller 0xffffff801da652fa): Kernel trap at 0xffffff7fa084dfe3, type 14=page fault, registers: CR0: 0x000000008001003b, CR2: 0xffffff83d44cd000, CR3: 0x000000002b260000, CR4: 0x00000000003406e0 RAX: 0xffffff83d44cd000, RBX: 0x0000000000005434, RCX: 0x0000000002000000, RDX: 0x0000000003000000 RSP: 0xffffff83d319bb60, RBP: 0xffffff83d319bb80, RSI: 0xffffff8066659c00, RDI: 0x0000000000000000 R8: 0x0000000000000001, R9: 0x0000000000000026, R10: 0x00000000f8000000, R11: 0x0000000000000070 R12: 0xffffff8061f35280, R13: 0xffffff835d231000, R14: 0x0000000000000000, R15: 0xffffff806189db90 RFL: 0x0000000000010246, RIP: 0xffffff7fa084dfe3, CS: 0x0000000000000008, SS: 0x0000000000000000 Fault CR2: 0xffffff83d44cd000, Error code: 0x0000000000000002, Fault CPU: 0x8, PL: 0, VF: 1 Backtrace (CPU 8), Frame : Return Address 0xffffff83d319b5c0 : 0xffffff801d93bb2b mach_kernel : _handle_debugger_trap + 0x47b 0xffffff83d319b610 : 0xffffff801da734d5 mach_kernel : _kdp_i386_trap + 0x155 0xffffff83d319b650 : 0xffffff801da64f4e mach_kernel : _kernel_trap + 0x4ee 0xffffff83d319b6a0 : 0xffffff801d8e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffff83d319b6c0 : 0xffffff801d93b217 mach_kernel : _DebuggerTrapWithState + 0x17 0xffffff83d319b7c0 : 0xffffff801d93b5fb mach_kernel : _panic_trap_to_debugger + 0x21b 0xffffff83d319b810 : 0xffffff801e0d2aa9 mach_kernel : _panic + 0x61 0xffffff83d319b880 : 0xffffff801da652fa mach_kernel : _sync_iss_to_iks + 0x2aa 0xffffff83d319ba00 : 0xffffff801da64ff8 mach_kernel : _kernel_trap + 0x598 0xffffff83d319ba50 : 0xffffff801d8e2a40 mach_kernel : _return_from_trap + 0xe0 0xffffff83d319ba70 : 0xffffff7fa084dfe3 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4readEj + 0x53 0xffffff83d319bb80 : 0xffffff7fa0885795 com.apple.kext.AMDRadeonX4000 : __ZN28AMDRadeonX4000_AMDVIHardware19getRegisterAperSizeEv + 0x23 0xffffff83d319bba0 : 0xffffff7fa084def0 com.apple.kext.AMDRadeonX4000 : __ZN29AMDRadeonX4000_AMDHWRegisters4initEP11IOPCIDeviceP30AMDRadeonX4000_IAMDHWInterface + 0xfa 0xffffff83d319bbe0 : 0xffffff7fa086d5c1 com.apple.kext.AMDRadeonX4000 : __ZN26AMDRadeonX4000_AMDHardware4initEP11IOPCIDeviceP28AMDRadeonX4000_IAMDHWHandlerRjP16_GART_PARAMETERSP14_FB_PARAMETERS + 0x257 0xffffff83d319bc30 : 0xffffff7fa07f3adb com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator17createHWInterfaceEP11IOPCIDevice + 0x7b 0xffffff83d319bc70 : 0xffffff7fa07f14be com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator15configureDeviceEP11IOPCIDevice + 0x10a 0xffffff83d319bd00 : 0xffffff7fa074e534 com.apple.iokit.IOAcceleratorFamily2 : __ZN22IOGraphicsAccelerator25startEP9IOService + 0x21e 0xffffff83d319bd80 : 0xffffff7fa07ef88e com.apple.kext.AMDRadeonX4000 : __ZN37AMDRadeonX4000_AMDGraphicsAccelerator5startEP9IOService + 0x82 0xffffff83d319bde0 : 0xffffff801e01b216 mach_kernel : __ZN9IOService14startCandidateEPS_ + 0xf6 0xffffff83d319be40 : 0xffffff801e01adc1 mach_kernel : __ZN9IOService15probeCandidatesEP12OSOrderedSet + 0xb21 0xffffff83d319bef0 : 0xffffff801e01a10e mach_kernel : __ZN9IOService14doServiceMatchEj + 0x2ce 0xffffff83d319bf50 : 0xffffff801e01c8ad mach_kernel : __ZN15_IOConfigThread4mainEPvi + 0x15d 0xffffff83d319bfa0 : 0xffffff801d8e213e mach_kernel : _call_continuation + 0x2e Kernel Extensions in backtrace: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7fa0716000->0xffffff7fa07d9fff dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[A243D030-19AC-30AA-AC70-6C786DF9E6CE]@0xffffff7f9e5f1000 dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9e6a6000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7fa06e5000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9e993000 dependency: com.apple.iokit.IOReportFamily(47)[988360A2-2E10-3014-A119-BE81BC045A10]@0xffffff7f9e29f000 com.apple.kext.AMDRadeonX4000(3.0.5)[5FD7AE5F-C03C-34A1-803F-ACA9B68524D0]@0xffffff7fa07ee000->0xffffff7fa0d32fff dependency: com.apple.iokit.IOPCIFamily(2.9)[ADD485B5-3EF8-37C4-B3C5-F86326E497A4]@0xffffff7f9e6a6000 dependency: com.apple.iokit.IOSurface(269.6)[42377B3B-D14A-368E-820F-07E7EA666198]@0xffffff7fa06e5000 dependency: com.apple.iokit.IOGraphicsFamily(569.4)[1F9B5D88-52DB-3A16-8373-4F608A3CB2D8]@0xffffff7f9e993000 dependency: com.apple.iokit.IOAcceleratorFamily2(438.3.1)[66992525-3204-3CB0-8F03-4B70031B1CF2]@0xffffff7fa0716000 BSD process name corresponding to current thread: kernel_task Boot args: debug=0x100 keepsyms=1 alcid=1 -v shikigva=128 Mac OS version: 19D76 Kernel version: Darwin Kernel Version 19.3.0: Thu Jan 9 20:58:23 PST 2020; root:xnu-6153.81.5~1/RELEASE_X86_64 Kernel UUID: A8DDE75C-CD97-3C37-B35D-1070CC50D2CE Kernel slide: 0x000000001d600000 Kernel text base: 0xffffff801d800000 __HIB text base: 0xffffff801d700000 System model name: MacPro7,1 (Mac-27AD2F918AE68F61) System shutdown begun: NO Panic diags file available: NO (0xe00002bc) System uptime in nanoseconds: 27776834167  
      config.plist
    • By NoEnd
      Hi team,
       
      I'm looking for the best route to achieve this upgrade, so I have been stuck with HS since Nvidia drivers stopped being supported on newer MacOS releases. Now I'm having an AMD 5700 xt on the way and want to plan the upgrade properly. I have added some information below and questions that might help with your recommendation.
       
      Current GPU 1080 ti with Nvidia webdrivers installed. So should I uninstall the webdriver before adding the new GPU? Clover is being used and EFI attached. Any kext must be removed? or parameters adjusted MacOS HS 10.13.6, should I upgrade before using the new GPU? CPU: 9900K Motherboard:ROG MAXIMUS XI HERO (WI-FI) Dual Monitors I have a Time machine backup, Do you recommend a fresh install? and If I did, will I be able to restore my data/apps as-is?  
      Please let yourself free to explore further aspects to considers.
      EFI-20200204.zip
×