Jump to content
K0gen

Lenovo ThinkPad T420 with UEFI Only

4,870 posts in this topic

Recommended Posts

@tluck THX, removed it from the config.plist, sadly didn't change the scene...

 

@pokenguyen THX a ton for the T420s DSDT and for the hint!

 

Here's the boot.log

-------------------------------
DATE: 2014-12-29 TIME: 22:16:38
-------------------------------
0:100  0:100  MemLog inited, TSC freq: 2491902559
0:100  0:000
0:100  0:000  Now is 29.12.2014,  21:16:31 (GMT+2047)
0:100  0:000  Starting Clover rev 3097 on Lenovo EFI
0:100  0:000  SelfDevicePath=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,7649213C-7A3E-476F-BF45-5CDCE96E34BE,0x28,0x64000) @D8074A98
0:100  0:000  SelfDirPath = \EFI\BOOT
0:100  0:000  Total Memory Slots Count = 2
0:100  0:000  Type 17 Index = 0
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
0:100  0:000  Type 17 Index = 1
0:100  0:000  SmbiosTable.Type17->Speed = 1333MHz
0:100  0:000  SmbiosTable.Type17->Size = 8192MB
0:100  0:000  SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
0:100  0:000  Boot status=0
0:100  0:000  Clover revision: 3097  running on 4174P5G
0:100  0:000  ... with board 4174P5G
0:100  0:000  Clover load options size = 0 bytes
0:101  0:001  Using OEM config.plist at path: EFI\CLOVER\config.plist
0:102  0:000  EFI\CLOVER\config.plist loaded: Success
0:102  0:000  Found theme directory: ThinkPad
0:103  0:000  Loading early settings
0:103  0:000  timeout set to 2
0:103  0:000  Custom boot CUSTOM_BOOT_DISABLED (0x0)
0:103  0:000  KextsToPatch: 2 requested
0:103  0:000  KextToPatch 0: IOAHCIBlockStorage (TRIM for SSD) Kext bin patch, data len: 9
0:103  0:000  KextToPatch 1: AppleHDA (change AD198B for Conexant 20672) Kext bin patch, data len: 4
0:103  0:000  Default theme: ThinkPad
0:103  0:000  Hiding entries with string recovery
0:103  0:000  CustomEDID ok
0:103  0:000  LoadDrivers() start
0:103  0:000  Loading FSInject-64.efi  status=Success
0:106  0:003  Loading NTFS-64.efi  status=Success
0:108  0:002   - driver needs connecting
0:108  0:000  Loading OsxAptioFixDrv-64.efi  status=Success
0:110  0:001  Loading OsxFatBinaryDrv-64.efi  status=Success
0:112  0:002  Loading VBoxHfs-64.efi  status=Success
0:114  0:002   - driver needs connecting
0:114  0:000  Loading ext2_x64.efi  status=Success
0:119  0:005   - driver needs connecting
0:119  0:000  3 drivers needs connecting ...
0:119  0:000  PlatformDriverOverrideProtocol not found. Installing ... Success
0:119  0:000  Searching for invalid DiskIo BY_DRIVER connects: not found, all ok
0:516  0:396  LoadDrivers() end
0:516  0:000  Dump SMC keys from NVRAM:
0:538  0:022  SetScreenResolution: 960x600 - setting Mode 1
0:643  0:105  Video mode change to mode #1: Success
0:643  0:000  Console modes reported: 7, available modes:
0:643  0:000    Mode 1: 80x25
0:643  0:000    Mode 3: 96x25
0:643  0:000    Mode 4: 120x31 (current mode)
0:643  0:000    Mode 5: 128x40
0:643  0:000    Mode 6: 80x25
0:643  0:000    Mode 7: 100x31
0:643  0:000  reinit: self device path=PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,7649213C-7A3E-476F-BF45-5CDCE96E34BE,0x28,0x64000)
0:644  0:000  CPU Vendor = 756E6547 Model=206A7
0:644  0:000  The CPU supported turbo
0:644  0:000  BrandString = Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz
0:644  0:000  MSR 0xE2 before patch 1E008404
0:644  0:000  MSR 0xE2 is locked, PM patches will be turned on
0:644  0:000  MSR 0xE4              00020414
0:644  0:000  MSR 0xCE              00000800_60011900
0:644  0:000  non-usable FLEX_RATIO = 10000
0:644  0:000  corrected FLEX_RATIO = 0
0:644  0:000  MSR 0x1B0             00000000
0:644  0:000  FSBFrequency=100MHz DMIvalue=100000kHz
0:644  0:000  Corrected FSBFrequency=100MHz
0:644  0:000  Vendor/Model/Stepping: 0x756E6547/0x2A/0x7
0:644  0:000  Family/ExtFamily: 0x6/0x0
0:644  0:000  MaxDiv/MinDiv: 25.0/8
0:644  0:000  Turbo: 30/30/30/32
0:644  0:000  Features: 0xBFEBFBFF
0:644  0:000  Threads: 4
0:644  0:000  Cores: 2
0:644  0:000  FSB: 100 MHz
0:644  0:000  CPU: 2500 MHz
0:644  0:000  TSC: 2500 MHz
0:644  0:000  PIS: 400 MHz
0:644  0:000  PCI (00|00:1C.00) : 8086 1C10 class=060400
0:644  0:000  PCI (00|00:02.00) : 8086 0126 class=030000
0:644  0:000  Found GFX model=Intel HD Graphics 3000
0:644  0:000  PCI (00|00:19.00) : 8086 1502 class=020000
0:644  0:000  LAN 0, Vendor=8086, MMIO=F1600000
0:644  0:000  PCI (00|00:1F.00) : 8086 1C4F class=060100
0:644  0:000  PCI (00|00:1C.01) : 8086 1C12 class=060400
0:644  0:000  PCI (00|00:1C.03) : 8086 1C16 class=060400
0:644  0:000  PCI (00|00:1C.04) : 8086 1C18 class=060400
0:644  0:000  PCI (00|00:1F.02) : 8086 1C03 class=010601
0:644  0:000  PCI (00|00:1A.00) : 8086 1C2D class=0C0320
0:644  0:000  PCI (00|00:1D.00) : 8086 1C26 class=0C0320
0:644  0:000  PCI (00|03:00.00) : 14E4 432B class=028000
0:644  0:000  PCI (00|0D:00.00) : 1033 0194 class=0C0330
0:644  0:000  PCI (00|05:00.00) : 197B 2392 class=088000
0:644  0:000  PCI (00|00:00.00) : 8086 0104 class=060000
0:644  0:000  PCI (00|00:16.00) : 8086 1C3A class=078000
0:644  0:000  PCI (00|00:16.01) : FFFF FFFF class=FFFFFF
0:644  0:000  PCI (00|00:16.03) : 8086 1C3D class=070002
0:644  0:000  PCI (00|00:1B.00) : 8086 1C20 class=040300
0:644  0:000  PCI (00|05:00.02) : 197B 2391 class=080501
0:644  0:000  PCI (00|05:00.03) : 197B 2393 class=088000
0:644  0:000  PCI (00|05:00.04) : 197B 2394 class=088000
0:644  0:000  PCI (00|00:1F.03) : 8086 1C22 class=0C0500
0:644  0:000  PCI (00|00:1F.06) : FFFF FFFF class=FFFFFF
0:644  0:000  ScanSPD() start
0:645  0:000  SMBus CmdReg: 0x3
0:645  0:000  Scanning SMBus [8086:1C22], mmio: 0xF1624004, ioport: 0xEFA0, hostc: 0x1
0:660  0:015  SPD[0]: Type 11 @0x50
0:669  0:008  DDR speed 1600MHz
0:669  0:000  Slot: 0 Type 24 8192MB 1600MHz Vendor=Corsair PartNo=CMSX8GX3M1A1600C10 SerialNo=0000000000000000
0:684  0:015  SPD[1]: Type 11 @0x51
0:693  0:008  DDR speed 1600MHz
0:693  0:000  Slot: 1 Type 24 8192MB 1600MHz Vendor=Corsair PartNo=CMSX8GX3M1A1600C10 SerialNo=0000000000050107
0:720  0:027  SPD[4]: Type 82 @0x54
0:735  0:015  SPD[5]: Type 82 @0x55
0:750  0:015  SPD[6]: Type 78 @0x56
0:913  0:162  SPD[12]: Type 63 @0x5C
0:980  0:067  ScanSPD() end
0:980  0:000  Found UEFI Acpi 2.0 RSDP at DAFFE014
0:980  0:000  Get Acpi Tables List from RSDT:
0:980  0:000   Found table: FACP  TP-8C    len=116
0:980  0:000   Found table: SLIC  TP-8C    len=374
0:980  0:000   Found table: SSDT  TP-SSDT2 len=585
0:980  0:000   Found table: SSDT  TP-SSDT1 len=51
0:980  0:000   Found table: SSDT  SataAhci len=1943
0:980  0:000   Found table: HPET  TP-8C    len=56
0:980  0:000   Found table: APIC  TP-8C    len=152
0:980  0:000   Found table: MCFG  TP-8C    len=60
0:980  0:000   Found table: ECDT  TP-8C    len=82
0:980  0:000   Found table: ASF!  TP-8C    len=165
0:980  0:000   Found table: TCPA  LENOVO len=50
0:980  0:000   Found table: SSDT  Cpu0Ist len=2613
0:980  0:000   Found table: SSDT  CpuPm len=2454
0:980  0:000   Found table: UEFI  TP-8C    len=62
0:980  0:000   Found table: UEFI  COMBUF len=66
0:980  0:000   Found table: UEFI  TP-8C    len=658
0:980  0:000  Calibrated TSC frequency =2491902559 =2491MHz
0:981  0:000  Loading main settings
0:981  0:000  USB FixOwnership: true
0:981  0:000  Dropping 4 tables
0:981  0:000  Drop table 0 signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
0:981  0:000  set table: 54445353,       6D50757043 to drop:  true
0:981  0:000
0:981  0:000  Drop table 1 signature="MCFG" (4746434D)
0:981  0:000  set table: 4746434D,                0 to drop:  true
0:981  0:000
0:981  0:000  Drop table 2 signature="DMAR" (52414D44)
0:981  0:000  set table: 52414D44,                0 to drop:
0:981  0:000  Drop table 3 signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
0:981  0:000  set table: 54445353,   74734930757043 to drop:  true
0:981  0:000
0:981  0:000  Config set Fixes will override FixMask mask!
0:981  0:000     final mask=9F52F1C3
0:981  0:000  Config set ResetAddr=0xCF9
0:981  0:000  Config calc ResetVal=0x6
0:981  0:000  Config set ResetVal=0x6
0:981  0:000  found 10 volumes with blockIO
0:981  0:000   0. Volume:
0:981  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
0:981  0:000   1. Volume:
0:981  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,7649213C-7A3E-476F-BF45-5CDCE96E34BE,0x28,0x64000)
0:981  0:000    Result of bootcode detection: bootable unknown (legacy)
0:981  0:000    This is SelfVolume !!
0:981  0:000   2. Volume:
0:981  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,9FB62F5F-E4CF-4EF3-A795-AA9F1A3B7B17,0x64028,0x18A5B7D8)
0:982  0:000   3. Volume:
0:982  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,CBC3C05F-EA4F-450B-9C68-CDD45ECE03BD,0x18AFF800,0x40000)
0:982  0:000   4. Volume:
0:982  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,E5DF8455-2795-4DAA-8F01-A9765E27B645,0x18B3F800,0xE48C800)
0:982  0:000    Result of bootcode detection: bootable unknown (legacy)
0:982  0:000   5. Volume:
0:982  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(5,GPT,70C589DD-89F9-4AC3-B02B-D44D172A618A,0x26FCC000,0x4E20000)
0:983  0:000   6. Volume:
0:983  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(6,GPT,2F28FC9D-526C-4F6B-B706-7D9AD7491D8F,0x2BDEC000,0x1770000)
0:983  0:000   7. Volume:
0:983  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(7,GPT,59B2EC5D-E5D8-4174-88B9-AA8BF731BBE0,0x2D55C000,0x2000000)
0:983  0:000   8. Volume:
0:983  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(8,GPT,913CFC07-AD88-4F81-A1E7-65AA865E045E,0x2F55C000,0xC34F800)
0:983  0:000    Result of bootcode detection: bootable Windows (vista,win)
0:983  0:000   9. Volume:
0:983  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(9,GPT,B1B1418D-9AC1-4F9B-880F-036B07AB6B75,0x3B8AB800,0x135800)
0:984  0:000    hiding this volume
0:984  0:000  Using theme 'ThinkPad' (EFI\CLOVER\themes\ThinkPad)
0:984  0:000  OS main and drive as badge
0:988  0:004  font font.png loaded from themedir
0:989  0:000  Choosing theme ThinkPad
0:989  0:000  Custom entries start
0:989  0:000  Custom entry 0 FullTitle:"Windows 8.1" Path:"\EFI\WINDOWS\Boot\bootmgr.efi" Options:"-s -h" Type:7 Flags:0x0 matching Volume:"Win8.1"
0:989  0:000      Checking volume "EFI" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,7649213C-7A3E-476F-BF45-5CDCE96E34BE,0x28,0x64000)) ... skipped
0:989  0:000      Checking volume "MacOS" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,9FB62F5F-E4CF-4EF3-A795-AA9F1A3B7B17,0x64028,0x18A5B7D8)) ... skipped
0:989  0:000      Checking volume "home" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(5,GPT,70C589DD-89F9-4AC3-B02B-D44D172A618A,0x26FCC000,0x4E20000)) ... skipped
0:989  0:000      Checking volume "LMDE" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(6,GPT,2F28FC9D-526C-4F6B-B706-7D9AD7491D8F,0x2BDEC000,0x1770000)) ... skipped
0:989  0:000      Checking volume "Win8.1" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(8,GPT,913CFC07-AD88-4F81-A1E7-65AA865E045E,0x2F55C000,0xC34F800)) ... skipped because path does not exist
0:989  0:000      Checking volume "Recovery HD" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(9,GPT,B1B1418D-9AC1-4F9B-880F-036B07AB6B75,0x3B8AB800,0x135800)) ... skipped because volume is hidden
0:989  0:000  Custom entry 1 FullTitle:"Linux" Path:"\EFI\LINUX\grubx64.efi" Type:4 Flags:0x0 matching Volume:"LMDE"
0:989  0:000      Checking volume "EFI" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,7649213C-7A3E-476F-BF45-5CDCE96E34BE,0x28,0x64000)) ... skipped
0:989  0:000      Checking volume "MacOS" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,9FB62F5F-E4CF-4EF3-A795-AA9F1A3B7B17,0x64028,0x18A5B7D8)) ... skipped
0:989  0:000      Checking volume "home" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(5,GPT,70C589DD-89F9-4AC3-B02B-D44D172A618A,0x26FCC000,0x4E20000)) ... skipped
0:989  0:000      Checking volume "LMDE" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(6,GPT,2F28FC9D-526C-4F6B-B706-7D9AD7491D8F,0x2BDEC000,0x1770000)) ... skipped because path does not exist
0:995  0:005      Checking volume "Win8.1" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(8,GPT,913CFC07-AD88-4F81-A1E7-65AA865E045E,0x2F55C000,0xC34F800)) ... skipped
0:995  0:000      Checking volume "Recovery HD" (PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(9,GPT,B1B1418D-9AC1-4F9B-880F-036B07AB6B75,0x3B8AB800,0x135800)) ... skipped because volume is hidden
0:995  0:000  Custom entries finish
0:995  0:000  Scanning loaders...
0:995  0:000   0: 'Whole Disc Boot' no file system
0:995  0:000   1: 'EFI'
1:005  0:010   2: 'MacOS'
1:008  0:002      AddLoaderEntry for Volume Name=MacOS
1:010  0:001      Check if volume Is Hibernated:
1:010  0:000      Check sleep image 'by signature':
1:011  0:001      read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
1:011  0:000      SleepImage name from pref: ImageVolume = 'MacOS', ImageName = '\private\var\vm\sleepimage'
1:013  0:001      sleepimage not found -> Not Found
1:013  0:000       hibernated: no - sign
1:020  0:006   3: 'Legacy HD3' no file system
1:020  0:000   4: 'Legacy HD4' no file system
1:020  0:000   5: 'home'
1:086  0:066   6: 'LMDE'
1:264  0:177  Reallocating buffer from 256 to 600
1:268  0:003  Reallocating buffer from 256 to 600
1:272  0:003  Reallocating buffer from 256 to 600
1:277  0:005  Reallocating buffer from 256 to 600
1:283  0:005  Reallocating buffer from 256 to 600
1:308  0:024      AddLoaderEntry for Volume Name=LMDE
1:448  0:140  Reallocating buffer from 256 to 600
1:454  0:006  Reallocating buffer from 256 to 600
1:458  0:003   7: 'Legacy HD7' no file system
1:458  0:000   8: 'Win8.1'
1:462  0:004   9: 'Recovery HD' hidden
1:462  0:000  Custom legacy start
1:462  0:000  Custom legacy end
1:462  0:000  Custom tool start
1:462  0:000  Custom tool end
1:463  0:000  found tool \EFI\CLOVER\tools\Shell64.efi
1:463  0:000  Checking EFI partition Volume 1 for Clover
1:463  0:000   Found Clover
1:465  0:001  GetEfiBootDeviceFromNvram: efi-boot-device-data not found
1:465  0:000  EfiBootVolume not found
1:465  0:000   found entry 0. 'Boot Mac OS X from MacOS', Volume 'MacOS', DevicePath 'PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,9FB62F5F-E4CF-4EF3-A795-AA9F1A3B7B17,0x64028,0x18A5B7D8)\System\Library\CoreServices\boot.efi'
1:465  0:000  DefaultIndex=0 and MainMenu.EntryCount=8
1:584  0:118  Found Mouse device:
1:584  0:000  GUI ready
3:022  1:437  BootOption of the entry is empty
3:022  0:000  StartLoader() start
3:022  0:000  Finally: Bus=99676kHz CPU=2491MHz
3:022  0:000  Kernel and Kext Patches:
3:022  0:000  	Allowed: y
3:022  0:000  	Debug: n
3:022  0:000  	KernelCpu: n
3:022  0:000  	Lapic: n
3:022  0:000  	AICPUPM: y
3:022  0:000  	AppleRTC: y
3:022  0:000  	KernelPm: n
3:022  0:000  	FakeCPUID: 0x0
3:022  0:000  	ATIController: <null string>
3:022  0:000  	ATIDataLength: 0
3:022  0:000  	0 Kexts to load
3:022  0:000  	2 Kexts to patch
3:022  0:000  	  KextPatch[0]: 9 bytes, IOAHCIBlockStorage
3:022  0:000  	  KextPatch[1]: 4 bytes, AppleHDA
3:022  0:000  Loading boot.efi  status=Success
3:077  0:055  GetOSVersion: : 10.10.1
3:077  0:000  insert table 9 for dev 19:0
3:077  0:000  insert table 9 for dev 0:0
3:078  0:000  Trusting SMBIOS...
3:078  0:000  Channels: 1
3:078  0:000  Interleave: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
3:078  0:000   partNum=CMSX8GX3M1A1600C10
3:078  0:000  SMBIOS Type 17 Index = 0 => 0 0:
3:078  0:000  BANK0 DIMM0 1600MHz 8192MB
3:078  0:000  mTotalSystemMemory = 8192
3:078  0:000   partNum=CMSX8GX3M1A1600C10
3:078  0:000  SMBIOS Type 17 Index = 1 => 1 1:
3:078  0:000  BANK0 DIMM1 1600MHz 8192MB
3:078  0:000  mTotalSystemMemory = 16384
3:078  0:000  NumberOfMemoryDevices = 2
3:078  0:000  Table 131 is present, CPUType=35
3:078  0:000  Change to: 603
3:078  0:000  Table 132 is present, QPI=D801
3:078  0:000  Change to: 0
3:078  0:000  RSDT 0xDAFFE0AC
3:078  0:000  FADT from RSDT: 0xDAFE9000
3:078  0:000  XSDT 0xDAFFE120
3:078  0:000  FADT from XSDT: 0xDAFE8000
3:078  0:000  Xsdt reallocation done
3:078  0:000  old FADT length=F4
3:078  0:000  Found OperationRegion(MNVS, SystemMemory, DAF9D018, ...)
3:078  0:000  Found OperationRegion(GNVS, SystemMemory, DAF3FE18, ...)
3:078  0:000  Found OperationRegion(IGDM, SystemMemory, 0, ...)
3:078  0:000  Found OperationRegion(TMMB, SystemMemory, FED40000, ...)
3:078  0:000  Found OperationRegion(ATRP, SystemMemory, 0, ...)
3:079  0:000  DSDT found in Clover volume OEM folder: EFI\CLOVER\ACPI\patched\DSDT.aml
3:079  0:000  Apply DsdtFixMask=0x9F52F1C3 new way
3:079  0:000     drop _DSM mask=0x0000
3:079  0:000  ========= Auto patch DSDT Starting ========
3:079  0:000  VideoCard devID=0x1268086
3:079  0:000  DisplayADR1[0] = 0x20000, DisplayADR2[0] = 0xFFFE
3:079  0:000  USBADR[0] = 0x1A0000 and PCIe = 0xFFFE
3:079  0:000  USBADR[1] = 0x1D0000 and PCIe = 0xFFFE
3:080  0:000  Found Airport BCM at 0x1C0001, 0x0
3:080  0:000  USBADR[2] = 0x1C0004 and PCIe = 0x0
3:080  0:000  Audio HDA (addr:0x1B0000) setting specified layout-id=12 (0xC)
3:080  0:000  first CPU found at B8 offset BB
3:080  0:000  score candidate at B4
3:080  0:000  score inserted in acpi_cpu_score _PR_
3:080  0:000  Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7
  within the score: _PR_
3:080  0:000  Start RTC Fix
3:080  0:000  Start PIC Fix
3:081  0:000  PIC size=30 at 3C19
3:081  0:000  Start Display0 Fix
3:081  0:000   builtin display
3:081  0:000  _DSM already exists, patch display will not be applied
3:081  0:000  now inserting Video device
3:081  0:000  ... into existing bridge
3:081  0:000  patch Display #0 of Vendor=0x8086 in DSDT new way
3:081  0:000  Start NetWork Fix
3:081  0:000  _DSM already exists, patch LAN will not be applied
3:082  0:000  Start Airport Fix
3:082  0:000  AirportADR=6D98 add patch size=F0
3:082  0:000  adr 6D98 size of arpt=CE
3:082  0:000  Start SBUS Fix PCI=1AC4 len=ABCF
3:082  0:000  device (SBUS) found at 7283
3:082  0:000  name BUS0 present at 20
3:082  0:000  BUS0 already exists, patch SBUS will not be applied
3:082  0:000  patch HDEF in DSDT
3:083  0:000  Start HDA Fix
3:083  0:000  found HDA device NAME(_ADR,0x001B0000) And Name is HDEF
3:083  0:000  NewName HDEF already present, renaming impossibble
3:083  0:000  _DSM already exists, patch HDA will not be applied
3:083  0:000  Start USB Fix
3:083  0:000  USB bridge[1A0000] at 762D, size = 2E6
3:083  0:000  _DSM already exists, patch USB will not be applied
3:084  0:000  USB bridge[1D0000] at 72D4, size = 357
3:084  0:000  _DSM already exists, patch USB will not be applied
3:084  0:000  USB bridge[1C0004] at 707D, size = 1C8
3:084  0:000  _DSM already exists, patch USB will not be applied
3:084  0:000   deleting device CRT_
3:085  0:000   deleting device DVI_
3:085  0:000   deleting device SPKR
3:085  0:000   deleting device ECP_
3:085  0:000   deleting device LPT_
3:085  0:000   deleting device FDC0
3:086  0:000   deleting device ECP1
3:086  0:000   deleting device LPT1
3:086  0:000  NewName OCST already present, renaming impossibble
3:087  0:000  Start PNLF Fix
3:087  0:000  Start _S3D Fix
3:087  0:000  OperationRegion (MNVS...) corrected to addr=0xDAF9D018
3:087  0:000  OperationRegion (GNVS...) corrected to addr=0xDAF3FE18
3:087  0:000    indirect name=ASLB
3:087  0:000  ... value not defined
3:087  0:000  OperationRegion (IGDM...) corrected to addr=0x0
3:087  0:000  OperationRegion (TMMB...) corrected to addr=0xFED40000
3:087  0:000  OperationRegion (ATRP...) corrected to addr=0x0
3:087  0:000  ========= Auto patch DSDT Finished ========
3:087  0:000  Drop tables from Xsdt, SIGN=SSDT TableID=CpuPm Length=2454
3:087  0:000   Xsdt has tables count=16
3:087  0:000   Table: SSDT  CpuPm  2454 dropped
3:087  0:000  corrected XSDT length=156
3:087  0:000  Drop tables from Xsdt, SIGN=SSDT TableID=Cpu0Ist Length=2613
3:087  0:000   Xsdt has tables count=15
3:087  0:000   Table: SSDT  Cpu0Ist  2613 dropped
3:087  0:000  corrected XSDT length=148
3:087  0:000  Drop tables from Xsdt, SIGN=MCFG TableID=TP-8C    Length=60
3:087  0:000   Xsdt has tables count=14
3:087  0:000   Table: MCFG  TP-8C     60 dropped
3:087  0:000  corrected XSDT length=140
3:087  0:000  Patch table: SSDT  TP-SSDT2
3:087  0:000   SSDT len = 0x249
3:087  0:000  Patch table: SSDT  TP-SSDT1
3:087  0:000   SSDT len = 0x33
3:087  0:000  Patch table: SSDT  SataAhci
3:087  0:000   SSDT len = 0x797
3:087  0:000  Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
3:087  0:000   Xsdt has tables count=13
3:087  0:000  corrected XSDT length=140
3:087  0:000   CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8
3:087  0:000  Maximum control=0x19
3:087  0:000  Turbo control=0x20
3:087  0:000  P-States: min 0x8, max 0x20
3:087  0:000  SSDT with CPU P-States generated successfully
3:087  0:000  SSDT with CPU C-States generated successfully
3:087  0:000  EdidDiscovered size=0
3:087  0:000  Intel Intel HD Graphics 3000 [8086:0126] :: PciRoot(0x0)\Pci(0x2,0x0)
3:087  0:000  Intel GFX revision  =0x9
3:088  0:000  HDA Controller [8086:1C20] :: PciRoot(0x0)\Pci(0x1B,0x0) => setting specified layout-id=12 (0xC)
3:088  0:000  stringlength = 1506
3:088  0:000  CurrentMode: Width=960 Height=600
3:088  0:000  FSInjection: skipping kext injection (not requested)
3:100  0:012  MSR 0x1B0   set to        00000000
3:101  0:000  Removed efi-boot-device-data variable: Not Found
3:101  0:000  Custom boot is disabled
3:101  0:000  Closing log

and my current config.plist

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>ACPI</key>
	<dict>
		<key>DSDT</key>
		<dict>
			<key>Debug</key>
			<false/>
			<key>DropOEM_DSM</key>
			<false/>
			<key>Fixes</key>
			<dict>
				<key>AddDTGP_0001</key>
				<true/>
				<key>AddHDMI_8000000</key>
				<true/>
				<key>AddPNLF_1000000</key>
				<true/>
				<key>DeleteUnused_400000</key>
				<true/>
				<key>FIX_ACST_4000000</key>
				<true/>
				<key>FIX_INTELGFX_100000</key>
				<true/>
				<key>FIX_RTC_20000</key>
				<true/>
				<key>FIX_S3D_2000000</key>
				<true/>
				<key>FixAirport_4000</key>
				<true/>
				<key>FixDarwin_0002</key>
				<true/>
				<key>FixDisplay_0100</key>
				<true/>
				<key>FixHDA_8000</key>
				<true/>
				<key>FixIPIC_0040</key>
				<true/>
				<key>FixLAN_2000</key>
				<true/>
				<key>FixRegions_10000000</key>
				<true/>
				<key>FixSBUS_0080</key>
				<true/>
				<key>FixUSB_1000</key>
				<true/>
				<key>NewWay_80000000</key>
				<true/>
			</dict>
			<key>Name</key>
			<string>DSDT.aml</string>
			<key>ReuseFFFF</key>
			<false/>
		</dict>
		<key>DropTables</key>
		<array>
			<dict>
				<key>Signature</key>
				<string>SSDT</string>
				<key>TableId</key>
				<string>CpuPm</string>
			</dict>
			<dict>
				<key>Signature</key>
				<string>MCFG</string>
			</dict>
			<dict>
				<key>Signature</key>
				<string>DMAR</string>
			</dict>
			<dict>
				<key>Signature</key>
				<string>SSDT</string>
				<key>TableId</key>
				<string>Cpu0Ist</string>
			</dict>
		</array>
		<key>ResetAddress</key>
		<string>0x0CF9</string>
		<key>ResetValue</key>
		<string>0x06</string>
		<key>SSDT</key>
		<dict>
			<key>DropOem</key>
			<false/>
			<key>Generate</key>
			<dict>
				<key>CStates</key>
				<true/>
				<key>PStates</key>
				<true/>
			</dict>
		</dict>
	</dict>
	<key>Boot</key>
	<dict>
		<key>Arguments</key>
		<string>slide=0 kext-dev-mode=1</string>
		<key>CustomLogo</key>
		<false/>
		<key>Debug</key>
		<false/>
		<key>DefaultVolume</key>
		<string>MacOS</string>
		<key>IgnoreNVRAMBoot</key>
		<true/>
		<key>Secure</key>
		<false/>
		<key>Timeout</key>
		<integer>2</integer>
		<key>MountEFI</key>
		<string>yes</string>
		<key>XMPDetection</key>
		<false/>
	</dict>
	<key>Devices</key>
	<dict>
		<key>Audio</key>
		<dict>
			<key>Inject</key>
			<string>12</string>
		</dict>
		<key>USB</key>
		<dict>
			<key>AddClockID</key>
			<true/>
			<key>FixOwnership</key>
			<true/>
			<key>HighCurrent</key>
			<true/>
			<key>Inject</key>
			<false/>
		</dict>
		<key>UseIntelHDMI</key>
		<true/>
	</dict>
	<key>GUI</key>
	<dict>
		<key>Custom</key>
		<dict>
			<key>Entries</key>
			<array>
				<dict>
					<key>Disabled</key>
					<false/>
					<key>FullTitle</key>
					<string>Windows 8.1</string>
					<key>Hidden</key>
					<false/>
					<key>Ignore</key>
					<false/>
					<key>Path</key>
					<string>\EFI\WINDOWS\Boot\bootmgr.efi</string>
					<key>Type</key>
					<string>Windows</string>
					<key>Volume</key>
					<string>913CFC07-AD88-4F81-A1E7-65AA865E045E</string>
					<key>VolumeType</key>
					<string>Internal</string>
				</dict>
				<dict>
					<key>Disabled</key>
					<false/>
					<key>FullTitle</key>
					<string>Linux</string>
					<key>Hidden</key>
					<false/>
					<key>Ignore</key>
					<false/>
					<key>Path</key>
					<string>\EFI\LINUX\grubx64.efi</string>
					<key>Type</key>
					<string>Linux</string>
					<key>Volume</key>
					<string>2F28FC9D-526C-4F6B-B706-7D9AD7491D8F</string>
					<key>VolumeType</key>
					<string>Internal</string>
				</dict>
			</array>
		</dict>
		<key>Hide</key>
		<array>
			<string>recovery</string>
		</array>
		<key>Mouse</key>
		<dict>
			<key>DoubleClick</key>
			<integer>500</integer>
			<key>Enabled</key>
			<true/>
			<key>Mirror</key>
			<false/>
			<key>Speed</key>
			<integer>8</integer>
		</dict>
		<key>Scan</key>
		<dict>
			<key>Entries</key>
			<true/>
			<key>Legacy</key>
			<false/>
			<key>Tool</key>
			<true/>
		</dict>
		<key>ScreenResolution</key>
		<string>960x600</string>
		<key>Theme</key>
		<string>ThinkPad</string>
	</dict>
	<key>Graphics</key>
	<dict>
		<key>CustomEDID</key>
		<data>
		AP///////wAw5OICAAAAAAEUAQOAHxF46jOFmVZVkScXUFQAAAABAQEBAQEB
		AQEBAQEBAQEBgCVAgGCEGjAwIDUANq4QAAAYQB9AgGCEGjAwIDUANq4QAAAY
		AAAA/gBMZW5vdm8KICAgICAgAAAA/gAxNjAweDkwMAogICAgAMc=
		</data>
		<key>DualLink</key>
		<integer>1</integer>
		<key>Inject</key>
		<dict>
			<key>ATI</key>
			<false/>
			<key>Intel</key>
			<true/>
			<key>NVidia</key>
			<false/>
		</dict>
		<key>InjectEDID</key>
		<true/>
	</dict>
	<key>KernelAndKextPatches</key>
	<dict>
		<key>AppleRTC</key>
		<true/>
		<key>AsusAICPUPM</key>
		<true/>
		<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Comment</key>
				<string>TRIM for SSD</string>
				<key>Find</key>
				<data>
				QVBQTEUgU1NE
				</data>
				<key>Name</key>
				<string>IOAHCIBlockStorage</string>
				<key>Replace</key>
				<data>
				AAAAAAAAAAAA
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>change AD198B for Conexant 20672</string>
				<key>Find</key>
				<data>
				ixnUEQ==
				</data>
				<key>Name</key>
				<string>AppleHDA</string>
				<key>Replace</key>
				<data>
				blDxFA==
				</data>
			</dict>
		</array>
	</dict>
	<key>RtVariables</key>
	<dict>
		<key>MLB</key>
		<string>C0335550asdladöljs3</string>
	</dict>
</dict>
</plist>

Both custom entry's don't show up in the menu... 

Share this post


Link to post
Share on other sites
Advertisement

@mircsisz 

 

do you have old zip version and log before 3094 - i.e. when it used to work? 

 

where was it getting this before you switched to use a custom entry method?

Custom entry 0 FullTitle:"Windows 8.1" Path:"/EFI/WINDOWS/Boot/bootmgr.efi" Options:"-s -h" Type:7 Flags:0x0 matching all volumes

 

also not sure about win 8 but the windows boot manager for me (win 7) is bootmgfw.efi not bootmgr.efi. 

 

have you tried my config.plist?

Share this post


Link to post
Share on other sites

@tluck I don't have boot.log from older boot's but just created some, think I've most versions since 2967...

 

Here's the config I use: 

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
	<key>ACPI</key>
	<dict>
		<key>DSDT</key>
		<dict>
			<key>Debug</key>
			<false/>
			<key>DropOEM_DSM</key>
			<dict>
				<key>ATI</key>
				<false/>
				<key>Firewire</key>
				<false/>
				<key>HDA</key>
				<false/>
				<key>HDMI</key>
				<false/>
				<key>IDE</key>
				<false/>
				<key>IntelGFX</key>
				<false/>
				<key>LAN</key>
				<false/>
				<key>LPC</key>
				<false/>
				<key>NVidia</key>
				<false/>
				<key>SATA</key>
				<false/>
				<key>SmBUS</key>
				<false/>
				<key>USB</key>
				<false/>
				<key>WIFI</key>
				<false/>
			</dict>
			<key>Fixes</key>
			<dict>
				<key>AddDTGP_0001</key>
				<true/>
				<key>AddHDMI_8000000</key>
				<true/>
				<key>AddIMEI_80000</key>
				<false/>
				<key>AddMCHC_0008</key>
				<false/>
				<key>AddPNLF_1000000</key>
				<true/>
				<key>DeleteUnused_400000</key>
				<true/>
				<key>FIX_ACST_4000000</key>
				<true/>
				<key>FIX_ADP1_800000</key>
				<false/>
				<key>FIX_INTELGFX_100000</key>
				<true/>
				<key>FIX_RTC_20000</key>
				<true/>
				<key>FIX_S3D_2000000</key>
				<true/>
				<key>FIX_TMR_40000</key>
				<true/>
				<key>FIX_WAK_200000</key>
				<false/>
				<key>FakeLPC_0020</key>
				<false/>
				<key>FixAirport_4000</key>
				<true/>
				<key>FixDarwin_0002</key>
				<true/>
				<key>FixDisplay_0100</key>
				<true/>
				<key>FixFirewire_0800</key>
				<false/>
				<key>FixHDA_8000</key>
				<true/>
				<key>FixHPET_0010</key>
				<false/>
				<key>FixIDE_0200</key>
				<false/>
				<key>FixIPIC_0040</key>
				<true/>
				<key>FixLAN_2000</key>
				<true/>
				<key>FixRegions_10000000</key>
				<true/>
				<key>FixSATA_0400</key>
				<false/>
				<key>FixSBUS_0080</key>
				<true/>
				<key>FixShutdown_0004</key>
				<false/>
				<key>FixUSB_1000</key>
				<true/>
				<key>NewWay_80000000</key>
				<true/>
			</dict>
			<key>Name</key>
			<string>DSDT.aml</string>
		</dict>
		<key>DropTables</key>
		<array>
			<dict>
				<key>Signature</key>
				<string>SSDT</string>
				<key>TableId</key>
				<string>Cpu0Ist</string>
			</dict>
			<dict>
				<key>Signature</key>
				<string>SSDT</string>
				<key>TableId</key>
				<string>CpuPm</string>
			</dict>
			<dict>
				<key>Signature</key>
				<string>DMAR</string>
			</dict>
			<dict>
				<key>Signature</key>
				<string>MCFG</string>
			</dict>
		</array>
		<key>ResetAddress</key>
		<string>0x0CF9</string>
		<key>ResetValue</key>
		<string>0x06</string>
		<key>SSDT</key>
		<dict>
			<key>Generate</key>
			<dict>
				<key>CStates</key>
				<true/>
				<key>PStates</key>
				<true/>
			</dict>
		</dict>
	</dict>
	<key>Boot</key>
	<dict>
		<key>Arguments</key>
		<string>slide=0 kext-dev-mode=1</string>
		<key>CustomLogo</key>
		<false/>
		<key>DefaultVolume</key>
		<string>MacOS</string>
		<key>Fast</key>
		<false/>
		<key>IgnoreNVRAMBoot</key>
		<true/>
		<key>Log</key>
		<false/>
		<key>Timeout</key>
		<integer>2</integer>
		<key>UseAlternateLogo</key>
		<true/>
		<key>XMPDetection</key>
		<false/>
	</dict>
	<key>Devices</key>
	<dict>
		<key>Audio</key>
		<dict>
			<key>Inject</key>
			<string>12</string>
		</dict>
		<key>Inject</key>
		<false/>
		<key>USB</key>
		<dict>
			<key>AddClockID</key>
			<true/>
			<key>FixOwnership</key>
			<true/>
			<key>HighCurrent</key>
			<true/>
			<key>Inject</key>
			<false/>
		</dict>
		<key>UseIntelHDMI</key>
		<true/>
	</dict>
	<key>GUI</key>
	<dict>
		<key>Hide</key>
		<array>
			<string>Windows</string>
		</array>
		<key>Mouse</key>
		<dict>
			<key>DoubleClick</key>
			<integer>500</integer>
			<key>Enabled</key>
			<true/>
			<key>Speed</key>
			<integer>8</integer>
		</dict>
		<key>Scan</key>
		<dict>
			<key>Entries</key>
			<true/>
			<key>Legacy</key>
			<false/>
			<key>Tool</key>
			<true/>
		</dict>
		<key>ScreenResolution</key>
		<string>960x600</string>
		<key>Theme</key>
		<string>ThinkPad</string>
	</dict>
	<key>Graphics</key>
	<dict>
		<key>Comment</key>
		<string>LCD 1600x900</string>
		<key>CustomEDID</key>
		<data>
		AP///////wAw5OICAAAAAAEUAQOAHxF46jOFmVZVkScXUFQAAAABAQEBAQEB
		AQEBAQEBAQEBgCVAgGCEGjAwIDUANq4QAAAYQB9AgGCEGjAwIDUANq4QAAAY
		AAAA/gBMZW5vdm8KICAgICAgAAAA/gAxNjAweDkwMAogICAgAMc=
		</data>
		<key>DualLink</key>
		<string>1</string>
		<key>Inject</key>
		<dict>
			<key>Intel</key>
			<true/>
		</dict>
		<key>InjectEDID</key>
		<true/>
	</dict>
	<key>KernelAndKextPatches</key>
	<dict>
		<key>AppleRTC</key>
		<true/>
		<key>AsusAICPUPM</key>
		<true/>
		<key>Debug</key>
		<false/>
		<key>KextsToPatch</key>
		<array>
			<dict>
				<key>Comment</key>
				<string>change AD198B for Conexant 20672</string>
				<key>Find</key>
				<data>
				ixnUEQ==
				</data>
				<key>Name</key>
				<string>AppleHDA</string>
				<key>Replace</key>
				<data>
				blDxFA==
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>Replace 4th port with VGA</string>
				<key>Find</key>
				<data>
				AQIEABAHAAAQBwAABQMAAAIAAAAwAAAAAgUAAAAEAAAH
				AAAAAwQAAAAEAAAJAAAABAYAAAAEAAAJAAAA
				</data>
				<key>Name</key>
				<string>AppleIntelSNBGraphicsFB</string>
				<key>Replace</key>
				<data>
				AQIEABAHAAAQBwAABQMAAAIAAAAwAAAAAgUAAAAEAAAH
				AAAAAwQAAAAEAAAJAAAABgIAABAAAAAJAAAA
				</data>
			</dict>
			<dict>
				<key>Comment</key>
				<string>TRIM for SSD</string>
				<key>Find</key>
				<data>
				QVBQTEUgU1NE
				</data>
				<key>Name</key>
				<string>IOAHCIBlockStorage</string>
				<key>Replace</key>
				<data>
				AAAAAAAAAAAA
				</data>
			</dict>
		</array>
	</dict>
	<key>SMBIOS</key>
	<dict>
		<key>BoardVersion</key>
		<string>MacBookPro8,1</string>
		<key>Mobile</key>
		<true/>
		<key>ProductName</key>
		<string>MacBookPro8,1</string>
		<key>Trust</key>
		<true/>
	</dict>
        <key>RtVariables</key>
        <dict>
                <key>MLB</key>
                <string>C0335550lsadjlöfdk5A3</string>
                <key>ROM</key>
                <data>
                AxxxxKvA==
                </data>
        </dict>
	<key>SystemParameters</key>
	<dict>
		<key>InjectKexts</key>
		<string>Detect</string>
		<key>InjectSystemID</key>
		<true/>
	</dict>
</dict>
</plist>
 

Except from DefaultVolume, Timeout and MLB&ROM it's your config1600x900.plist. It's the one that worked for me from the beginning of my OSx86 Setup on my T420s...

 

Here's the 2967 boot.log

http://paste.debian.net/138545/

 

2988 boot.log

http://paste.debian.net/138546/

 

3025 boot.log

http://paste.debian.net/138549/

 

3048 boot.log

http://paste.debian.net/138551/

 

3094 boot.log

http://paste.debian.net/138552/

 

and 3097 boot.log

http://paste.debian.net/138553/

 

All tested with the config.plist from above...

Share this post


Link to post
Share on other sites

mircsizc

 

well that must be an older config.plist - but the output looks different - and ok.  no weird stuff around custom entries.   so remove the hide windows thing or get the latest config.plist and you should be seeing all your bootable partitions. 

Share this post


Link to post
Share on other sites

Hello, I'm happily running my hackintosh for over a month now and finally decided to add a second display, Dell 2414H. I'm using DP-DP connection and OS doesn't see the display.
I'm running 1600x900 plist with HD3000 only enabled, OSX 10.10.1. and Clover v3025. What should I check?

Share this post


Link to post
Share on other sites

@all - i reposted a new bundle with clover r3108 - the change is I recompiled it to remove (annoying) text before the GUI. 

 

@dauren - hmm not sure. you should have DP buffer/port available? are you using the zip/config.plist from my guide?

can it find it on cold boot up?

 

if you look at the kexts do you see these kexts

$ kextstat|grep -i grap

   77   15 0xffffff7f812ea000 0x47000    0x47000    com.apple.iokit.IOGraphicsFamily (2.4.1) <12 7 5 4 3 1>

   78    0 0xffffff7f81bea000 0x2e000    0x2e000    com.apple.driver.AppleIntelSNBGraphicsFB (10.0.0) <77 12 11 7 6 5 4 3 1>

   80    0 0xffffff7f81c77000 0x67000    0x67000    com.apple.driver.AppleIntelHD3000Graphics (10.0.0) <77 12 7 5 4 3 1>

   97    2 0xffffff7f82011000 0x3000     0x3000     com.apple.driver.AppleGraphicsControl (3.7.21) <77 12 11 7 5 4 3 1>

  119    1 0xffffff7f81ff0000 0x6000     0x6000     com.apple.AppleGraphicsDeviceControl (3.7.21) <7 6 5 4 3 1>

 
you could dump out registry (run:  ioreg -l) and and there should be 4 frame buffers. this with LCD and external monitor on my DP (left side).
 
$ ioreg -l |grep AppleIntelF|grep -v IOK

    | |   | |   "attached-gpu-control-path" = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IGPU@2/AppleIntelFramebuffer@0/AGPM"

    | |   | +-o AppleIntelFramebuffer@0  <class AppleIntelFramebuffer, id 0x1000002ea, registered, matched, active, busy 0 (18 ms), retain 18>

    | |   | |         "IODisplayPrefsKey" = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IGPU@2/AppleIntelFramebuffer@0/display0/AppleBacklightDisplay-30e4-2e2"

    | |   | +-o AppleIntelFramebuffer@1  <class AppleIntelFramebuffer, id 0x1000002eb, registered, matched, active, busy 0 (48 ms), retain 17>

    | |   | |         "IODisplayPrefsKey" = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IGPU@2/AppleIntelFramebuffer@1/display0/AppleDisplay-22f0-2869"

    | |   | +-o AppleIntelFramebuffer@2  <class AppleIntelFramebuffer, id 0x1000002ec, registered, matched, active, busy 0 (43 ms), retain 16>

    | |   | +-o AppleIntelFramebuffer@3  <class AppleIntelFramebuffer, id 0x1000002ed, registered, matched, active, busy 0 (26 ms), retain 15>

 

Share this post


Link to post
Share on other sites

I have followed this guide 100%, but my audio is not working.

 

Everything else is working.. What am I missing? 

 

I have a t420 with Conexant 20672.

 

Is there something extra I am meant to do that isnt in the guide?

Share this post


Link to post
Share on other sites

I have followed this guide 100%, but my audio is not working.

 

Everything else is working.. What am I missing? 

 

I have a t420 with Conexant 20672.

 

Is there something extra I am meant to do that isnt in the guide?

the expert is tluck but i would add again all the kext in /S/L/E

use Kext Utility again

reboot

it shoud work

 

Happy new year to all :)

Share this post


Link to post
Share on other sites

@dreddtech

welcome to the club!

 

key factors for the AppleHDA_20672.kext:

 

is that the file Contents/MacOS/AppleHDA is symbolic link to the native binary.  

which means you keep the original version in place.

you can check that from the command line.

and the kext must be installed in /S/L/E versus left in the /EFI partition. 

 

 

$ cd /System/Library/Extensions/AppleHDA_20672.kext/Contents/MacOS

$ ls -l

total 8

lrwxr-xr-x  1 root  wheel  64 Dec 24 16:50 AppleHDA -> /System/Library/Extensions/AppleHDA.kext/Contents/MacOS/AppleHDA

Share this post


Link to post
Share on other sites

@dreddtech

welcome to the club!

 

key factors for the AppleHDA_20672.kext:

 

is that the file Contents/MacOS/AppleHDA is symbolic link to the native binary.  

which means you keep the original version in place.

you can check that from the command line.

and the kext must be installed in /S/L/E versus left in the /EFI partition. 

 

 

$ cd /System/Library/Extensions/AppleHDA_20672.kext/Contents/MacOS

$ ls -l

total 8

lrwxr-xr-x  1 root  wheel  64 Dec 24 16:50 AppleHDA -> /System/Library/Extensions/AppleHDA.kext/Contents/MacOS/AppleHDA

 

Just to confirm,

 

I am meant to copy all the kexts you provided to S/L/E then run them through kext utility?

 

Do I still keep them in the clover folder?

Share this post


Link to post
Share on other sites

I did all the steps and everything work perfectly! but what about the wifi?

Is there anyway to get the wifi working or i must use external wifi adapter?
 

Share this post


Link to post
Share on other sites

Ok so my audio still isn't working.. But after running that cmd you advised tluck it looks like the symbolic link isnt working. What would cause this?

Share this post


Link to post
Share on other sites

@walid-wah

the built-in intel wifi will not work. you need to replace it with a OSX-compatible chip/card. there are a number of broadcom or atheros options. or you can get a USB version.

 

@dreddtech

well you can make a new symbolic link and then rebuild the caches. do this:

cd /System/Library/Extensions/AppleHDA_20672.kext/Contents/MacOS
sudo rm AppleHDA
sudo ln -s /System/Library/Extensions/AppleHDA.kext/Contents/MacOS/AppleHDA
sudo touch /System/Library/Extensions

Share this post


Link to post
Share on other sites

@all - i reposted a new bundle with clover r3108 - the change is I recompiled it to remove (annoying) text before the GUI. 

 

@dauren - hmm not sure. you should have DP buffer/port available? are you using the zip/config.plist from my guide?

can it find it on cold boot up?

 

if you look at the kexts do you see these kexts

$ kextstat|grep -i grap

   77   15 0xffffff7f812ea000 0x47000    0x47000    com.apple.iokit.IOGraphicsFamily (2.4.1) <12 7 5 4 3 1>

   78    0 0xffffff7f81bea000 0x2e000    0x2e000    com.apple.driver.AppleIntelSNBGraphicsFB (10.0.0) <77 12 11 7 6 5 4 3 1>

   80    0 0xffffff7f81c77000 0x67000    0x67000    com.apple.driver.AppleIntelHD3000Graphics (10.0.0) <77 12 7 5 4 3 1>

   97    2 0xffffff7f82011000 0x3000     0x3000     com.apple.driver.AppleGraphicsControl (3.7.21) <77 12 11 7 5 4 3 1>

  119    1 0xffffff7f81ff0000 0x6000     0x6000     com.apple.AppleGraphicsDeviceControl (3.7.21) <7 6 5 4 3 1>

 
you could dump out registry (run:  ioreg -l) and and there should be 4 frame buffers. this with LCD and external monitor on my DP (left side).
 
$ ioreg -l |grep AppleIntelF|grep -v IOK

    | |   | |   "attached-gpu-control-path" = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IGPU@2/AppleIntelFramebuffer@0/AGPM"

    | |   | +-o AppleIntelFramebuffer@0  <class AppleIntelFramebuffer, id 0x1000002ea, registered, matched, active, busy 0 (18 ms), retain 18>

    | |   | |         "IODisplayPrefsKey" = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IGPU@2/AppleIntelFramebuffer@0/display0/AppleBacklightDisplay-30e4-2e2"

    | |   | +-o AppleIntelFramebuffer@1  <class AppleIntelFramebuffer, id 0x1000002eb, registered, matched, active, busy 0 (48 ms), retain 17>

    | |   | |         "IODisplayPrefsKey" = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IGPU@2/AppleIntelFramebuffer@1/display0/AppleDisplay-22f0-2869"

    | |   | +-o AppleIntelFramebuffer@2  <class AppleIntelFramebuffer, id 0x1000002ec, registered, matched, active, busy 0 (43 ms), retain 16>

    | |   | +-o AppleIntelFramebuffer@3  <class AppleIntelFramebuffer, id 0x1000002ed, registered, matched, active, busy 0 (26 ms), retain 15>

 

Sorry for a late reply, holidays :)

Yes I am using your config from zip file. Also tried to connect from dock station with same negative result.

Here is the output:

dauren@dmbp:~$kextstat|grep -i grap
   73   15 0xffffff7f8141e000 0x47000    0x47000    com.apple.iokit.IOGraphicsFamily (2.4.1) <12 7 5 4 3 1>
   74    0 0xffffff7f82051000 0x2e000    0x2e000    com.apple.driver.AppleIntelSNBGraphicsFB (10.0.0) <73 12 11 7 6 5 4 3 1>
   82    0 0xffffff7f820de000 0x67000    0x67000    com.apple.driver.AppleIntelHD3000Graphics (10.0.0) <73 12 7 5 4 3 1>
  110    2 0xffffff7f82478000 0x3000     0x3000     com.apple.driver.AppleGraphicsControl (3.7.21) <73 12 11 7 5 4 3 1>
  118    1 0xffffff7f82457000 0x6000     0x6000     com.apple.AppleGraphicsDeviceControl (3.7.21) <7 6 5 4 3 1>
dauren@dmbp:~$ioreg -l |grep AppleIntelF|grep -v IOK
    | |   | |   "attached-gpu-control-path" = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IGPU@2/AppleIntelFramebuffer@0/AGPM"
    | |   | +-o AppleIntelFramebuffer@0  <class AppleIntelFramebuffer, id 0x1000002bc, registered, matched, active, busy 0 (19 ms), retain 19>
    | |   | | |       "IODisplayPrefsKey" = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IGPU@2/AppleIntelFramebuffer@0/display0/AppleBacklightDisplay-30e4-2e2"
    | |   | +-o AppleIntelFramebuffer@1  <class AppleIntelFramebuffer, id 0x1000002bd, registered, matched, active, busy 0 (16 ms), retain 15>
    | |   | +-o AppleIntelFramebuffer@2  <class AppleIntelFramebuffer, id 0x1000002be, registered, matched, active, busy 0 (16 ms), retain 15>
    | |   | +-o AppleIntelFramebuffer@3  <class AppleIntelFramebuffer, id 0x1000002bf, registered, matched, active, busy 0 (16 ms), retain 15>

Share this post


Link to post
Share on other sites

Hello everyone,

 

One more T420 user here, trying to make it to run Yosemite as the primary and maybe the only OS.

My model is 4236AT9 which is the same as tluck's (btw THANKS MAN for your amazing work here!!! This is an example of dedication and community support for all of us!).

Given the above, I hoped for an easy walkthrough, but guess what... kicking the tires for the 3rd day already. May I ask for some help?

 

I believe the cause of my pain is that I only have access to old MacMini running Snow Leo (10.6.8), though probably my lame hands and lack of expertise exacerbate that ;-)

Long story short... I transferred a 10.10 image to my Mac Mini, createinstallmedia failed with "incorrect CPU type" error (which didn't surprise me), but unfortunately Clover_v2_r1625.pkg failed as well.

Fortunately, a Mountain Lion Install Disk Build Tool (found in another thread here) supports Yosemite now, so I was able to run it on my Snow Leo.

And Clover_v2k_r3113.pkg works as well, though I am not sure if I need to use it on Yosemite install disk prepared with above tool...

I followed the guide where I could (upgraded BIOS, switched to UEFI, disabled virtualization, put the contents of T420/EFI dir to manually mounted ESP of USB partition, renamed ACPI.1600x900 to ACPI, etc... Here is where things stand now:

 

The USB boots to Clover in UEFI mode, there's a ThinkPad theme, and I can get to options and shell and such, but when I kick "Boot Mac OS X from Yosemite Install Disk - 10.10", I get an apple logo for like 25 sec., and then the laptop reboots.

My semi-educated guess is that I need to put some pieces in place, that are normally put by either Clover_v2_r1625.pkg or createinstallmedia.

Can I still get through without running these two?

 

Thanks,

Me.

 

Update: I followed this guide to manually create install image. So maybe my question is just about where to put the remaining kexts, DSDTs, AMLs and other small pieces that I have very vague understanding of.

Or, to realize that I am heading in a totally wrong direction.

Edited by OneMore

Share this post


Link to post
Share on other sites

@dauren -

no idea - does this same cable work with windows to the external monitor?

 

@OneMore 

so you still struggling with making the Yosemite installer?

I presume you have downloaded a proper Yosemite version (installer) from AppStore? so you have /Applications/Install OS X Yosemite.app

for 10.10.1 it will installer version 1.6.7

 

I take it that you cannot use the built-in (creatinstallmedia) method because the macMini is not yosemite compatible?

 

then perhaps try the more recent version of Lion Disk maker. http://diskmakerx.com - which is yosemite capable and can run on 10.6.8.

once you get the bits onto the USB (format the USB GUID/GPT formatted) then you can replace the /EFI partition with the same zip.

the Diskmaker process will erase the disk and put all the installation bits onto the 2nd partition.

once this is done, follow my guide at Part 1 installation common steps.

Share this post


Link to post
Share on other sites

@tluck

 

Thanks for chiming in! Sorry, yes, still there... And yes, I used the same latest Disk Maker X 4b4, rebooted/re-ran again, now in the end of the build process I noticed an error (attaching screen)...

post-1461662-0-38336500-1420422253_thumb.png

Now checked the FAQ section on diskmakerx and found the following:

 

I can’t use DiskMaker X with Mac OS X 10.6.x if I try to use it with my Mavericks installer!

Because of a bug (or a feature?) in Apple’s built-in command createinstallmedia with 10.6.X, DiskMaker X is not compatible with versions of OS X prior to 10.7. I’m working on a fix, but it may take some time to make it available as it means using another completely different method.

 

So now I am not even sure if it supposed to work on my MacMini, even though it launches and does the job for the most part (or so it looks like).

 

Regardless... Is there a way to validate my newly built install disk, at least for most common user/environment errors?

Or to collect some info on what's going on before ThinkPad reboots trying to launch the installer - like enable diag output instead of apple logo?

In lieu of better options, attaching the filelists from this USB. Maybe something looks not as expected and can be fixed by simple file manipulation?

MyUSB-AllFiles.zip

 

Truth be told, I have quite marginal Mac exposure (hope to make it better with this exercise), and my Win / Linux experience is almost 10 years behind the time, so the gut feeling is I may be missing something so trivial that it's not even mentioned. Like... should I have created partitions on the USB stick, after switching to GPT? Especially keeping in mind case sensitive filesystem or otherwise? Can existing HDD layout on the T420 be a problem? (I didn't kill a few Linux partitions there yet).

 

Thanks again,

Me

Edited by OneMore

Share this post


Link to post
Share on other sites

@OneMore 

 

things seem to be pretty much as they should be from the USB standpoint.

 

when you boot up and land on the Clover GUI, you can hit the space bar to then boot with options. boot the OSX Installer with verbose to see where it goes. or stops.  it may take 5 minutes or so boot up. 

 

However, there is alternate manual way to make an installer from OSX - i just tested on Yosemite 10.10.1 and it worked just fine.

 

on your Mac mini...

 

1) format an 8GB USB as GUID with 1 partition HFS - which makes EFI partition as well. 

2) follow the "dev method' in this link: this guide

    Note: I renamed the USB copy of "OS X Base System" to "Installer" (to make it more obvious in Clover) when it finished copying everything to it.

 

3) mount the ESP and then copy the zip contents - the full EFI folder set to the ESP.

4) rename ACPI.1600x900 to ACPI

5) rename config.1600x900.plist to config.plist

 

then reboot and hit F12 to select boot from USB

select Installer - you can hit space to boot verbose - but otherwise the Installer booted for me.

Share this post


Link to post
Share on other sites

Hey everybody,

 

trying to install Windows 7 on my t420 from a DVD I created by downloading the Windows 7 installer.

Strangly the installer tells me that I can't install on a particular partition because it's MBR, but it is GUID in fact.

I want to install on disk1s4 partition. Any ideas?

 

Thanks, juniorprofi

 

/dev/disk0
   #:                       TYPE NAME                          SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *120.0 GB   disk0
   1:                                       EFI EFI                    209.7 MB disk0s1
   2:                          Apple_HFS SSD                  119.7 GB  disk0s2
/dev/disk1
   #:                       TYPE NAME                           SIZE       IDENTIFIER
   0:      GUID_partition_scheme                         *1.0 TB     disk1
   1:                                       EFI EFI                     209.7 MB   disk1s1
   2:                           Apple_HFS Pladde               899.7 GB   disk1s2
   3:                           Apple_Boot Recovery HD    650.0 MB   disk1s3
   4:             Microsoft Basic Data                           99.7 GB    disk1s4
/dev/disk2
   #:                       TYPE NAME                                         SIZE       IDENTIFIER
   0:                                 GSP1RMCPRXFRER_DE_DVD  *3.3 GB     disk2

Share this post


Link to post
Share on other sites

Re-make your win7 installation using Rufus. Select gpt for uefi computers when making it. Make sure your Iso is 64bit. And you may have issues if the image is x86 x64 multi

Share this post


Link to post
Share on other sites

@juniorprofi

 

if you created the NTFS partition with Disk Utility it will have converted your GUID disk with a PMBR to one with MBR.  this confuses the windows installer. search this forum for PMBR - i have gone over this many times! 

 

Note: i suppose i will add it the GUIDE - of what NOT to do - when dual booting windows. gdisk can fix this - i.e. get rid of the MBR. 

 

Here is a script I used recently to clone my HD when it was failing. the script makes 4 partitions.

 

EFI

OSX

Recovery HD

Windows (NTFS)

 

you can decide how big to make your OSX vs Windows partitions but this was on a 750GB drive. it is roughly a ~48GiB windows partition. see list at the end. if one already has the first 3 sections and there is enough space on the disk (or one can shrink the OSX and add free space if needed) then one can use the partition 4 section below to add a Windows partition that is UEFI/hackintosh compatible.

 

the script is meant to be run as root:

save the lines below into a file for example make_disk.bash

edit all the size parameters to match your case

suppose disk1 is the one you want to (re)partition

then run by: sudo make_disk.bash disk1

 

if you want to just add a 4th partition then put the section 4 in a script (and fix the sizes)

#!/bin/bash

# use gtp to add windows partition - to keep PMBR

# partition 1  EFI
diskutil unmountDisk $1
sleep 3
gpt add -s 409600 -t C12A7328-F81F-11D2-BA4B-00A0C93EC93B $1
sleep 3
diskutil unmountDisk $1
gpt label -i 1 -l "EFI" $1
sleep 3

# partition 2 OSX
diskutil unmountDisk $1
sleep 3
gpt add -s 1362786480 -t 48465300-0000-11AA-AA11-00306543ECAC $1
sleep 3
diskutil unmountDisk $1
gpt label -i 2 -l "OSX" $1
sleep 3

# partition 3 Recovery HD
diskutil unmountDisk $1
sleep 3
gpt add -s 1269544 -t 426F6F74-0000-11AA-AA11-00306543ECAC $1
sleep 3
diskutil unmountDisk $1
gpt label -i 3 -l "Recovery HD" $1
sleep 3

# partition 4 NTFS
diskutil unmountDisk $1
sleep 3
gpt add -s 100681728  -t EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 $1
sleep 3
diskutil unmountDisk $1
gpt label -i 4 -l "Windows" $1
sleep 3

diskutil unmountDisk $1

gpt -r show $1

exit
#
#$ gpt -r show disk1
#       start        size  index  contents
#           0           1         PMBR
#           1           1         Pri GPT header
#           2          32         Pri GPT table
#          34           6
#          40      409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
#      409640  1362786480      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
#  1363196120     1269544      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
#  1364465664   100681728      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
#  1465147392        1743
#  1465149135          32         Sec GPT table
#  1465149167           1         Sec GPT header

Share this post


Link to post
Share on other sites

@tluck

 

Thanks for your efforts, but sorry, no cigar - I am still stuck in mud, kicking tires, slamming doors and flashing the headlights. And the idea of voodoo dances doesn't seem too weird already...

 

The dev method you referred to is exactly what I did last time, so now I tried to do better and rule out a few 'suspects' with the following:

- I found someone with a Mac (Lion) who allowed me to play on their system a little bit, so I could re-download Yosemite from the app store, and run the creatinstallmedia in a standard/easy way (command line).

- And I tried to boot the installer in all different modes, thanks to your hint (verbose, single user, safe, no cache/kexts etc), but with exactly same result: machine goes to reboot in a few seconds (or immediately, depend on option selected), after local hard drive is detected. Or so I interpret the output, see picture attached.

post-1461662-0-08508500-1420517930_thumb.png

- To rule out anything HDD related, I swapped it with a 25GB drive from some ancient ThinkPad. This drive has just one empty NTFS partition. I can even zero it out, if that can make a difference.

Still no progress, but now once we have installer and HDD 'cleared', the next suspects are hardware/firmware guts, nuts and bolts, correct?

 

This laptop was used to run various Linuxes before, and I just confirmed it boots to Windows 8 PE x32 and x64 live CD (this is how I flashed the BIOS). I don't see reason to suspect odd ACPI config, or faulty hardware, or custom flashing. The machine is not secured/locked in any way that I could identify, no system/disk passwords etc.

 

So, can we confirm these two things:

1. Should I have unpacked all contents of T420_UEFI-Clover-b3108_10.9_10.10_2014-12-30.zip to ESP-USB partition completely, or just EFI directory, as I did (renaming two 1600x900 items of course)?
(for example, this ":System:Library:Displays:Overrides/" directory looks quite fancy, never seen anything like that... No need for it to be on USB? Just curious...)

2. I upgraded the BIOS to "stock" 1.46 as your guide suggests, but did not flash the whitelisted one (the link in patchers' forum is broken, and I didn't find another copy - maybe someone here has it), and same about DSDT and such, I didn't do anything like that. Could it make a difference?

 

That's what I could think of and try at the moment. Knowing that we have 100% identical machines makes this situation look a bit crazy. What could I possibly do wrong there???

 

Thx,

Me

Edited by OneMore

Share this post


Link to post
Share on other sites

@OneMore. 

 

well you have made the installer. and added the entire EFI folder (just need the EFI folder for the USB) onto the ESP. that's done.

and it looks like its trying to load from the USB. what size USB is this?  did you try different USB ports?

 

very odd as you say. we have the same system. it must be a system BIOS setting. you have v1.46 so good. did you reset to defaults?

 

BIOS settings: 

 

 - disable VT-d 

- SATA set AHCI mode

- Enable Execution Bit

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Klaidonis
      I am making a minimal Clover build for the fastest boot possible with the boot6 file in legacy mode.
      While looking at the preboot.log, I noticed that there is a line without explanation (at 0:892). Apparently, whatever it is, the execution time of it is close to 2 seconds, more than 55% of the total logged boot time in the current configuration. This does not change whether I use USB 2 or USB 3 port.
       
      Is there a way to eliminate or speed up the above? Also, is there anything else you can suggest to improve the performance based on the below log file? Which moment in the boot process corresponds to the start time in preboot.log?  
      The last thing I would like to understand is the delay/timeout after the boot6 file has loaded, and the number 6 disappears from the screen. For about 2 seconds or slightly less, I can press any key, and then it will enter the BIOS-like interface from the boot6 file. Without further knowledge, it seems like those 2 seconds are just delay time, and only after that is CLOVERX64.efi actually started, which, I presume, is approximately when the preboot.log timer starts. So, if the aforementioned is correct, can I get rid of this delay as well? Note that I am using the boot1f32 file to chain-load boot6, which does not include the initial 2-second wait period for a keypress.
       
      === preboot.log ===
      0:100 0:100 MemLog inited, TSC freq: 2394459554 0:100 0:000 CPU was calibrated with ACPI PM Timer 0:100 0:000 LegacyRegion2: Chipset/proc: 0x0A048086 0:100 0:000 Next Generation Core processors (PAM 0x80-0x86) 0:100 0:000 Test PAM1=(0x41=90, 0x5a=90, 0x81=11, 0x91=00) at chipset 0A048086 0:100 0:000 , Install = Success 0:112 0:012 BiosVideoDriverBindingStart! 0:112 0:000 BiosVideoCheckForVbe 0:112 0:000 EdidOverride not found 0:121 0:009 Edid1+ 0:121 0:000 found Detail Timing 1920x1080 0:121 0:000 timing string after 0xFE:AUO 0:121 0:000 timing string after 0xFE:B156HAN01.2 0:122 0:000 0 1280x1024 attr=9B - ok, edid- 0:122 0:000 1 1024x768 attr=9B - ok, edid-, 1024x768, working, highest, pref=1 0:122 0:000 2 640x480 attr=9B - ok, edid-, 640x480, working 0:122 0:000 3 800x600 attr=9B - ok, edid-, 800x600, working 0:123 0:000 4 1920x1080 attr=9B - ok, edid+, working, highest, pref=4 0:123 0:000 BV new mode: 4 1920x1080 0:398 0:275 SetMode pref 4 (4) = Success 0:892 0:493 VGA Pci.Hdr.Command=6 - not enabled 2:623 1:731 2:623 0:000 Now is 21.02.2020, 13:03:21 (GMT) 2:623 0:000 Starting Clover revision: 5103 (master, commit 3f3b85da0) on CLOVER EFI 2:623 0:000 Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t GCC53 | -D NO_GRUB_DRIVERS_EMBEDDED --conf=/Users/sergey/src/CloverHackyColor/Conf -D USE_LOW_EBDA -a X64 -b RELEASE -t GCC53 -n 5 | OS: 10.14.6] 2:623 0:000 SelfDevicePath=PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) @940C9698 2:623 0:000 SelfDirPath = \EFI\CLOVER 2:623 0:000 SimpleTextEx Status=Success 2:623 0:000 === [ Get Smbios ] ======================================== 2:623 0:000 Type 16 Index = 0 2:623 0:000 Total Memory Slots Count = 2 2:623 0:000 Type 17 Index = 0 2:623 0:000 SmbiosTable.Type17->Speed = 1600MHz 2:623 0:000 SmbiosTable.Type17->Size = 4096MB 2:623 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 DIMM0 2:623 0:000 SmbiosTable.Type17->Vendor = Hynix 2:623 0:000 SmbiosTable.Type17->SerialNumber = 00000000 2:623 0:000 SmbiosTable.Type17->PartNumber = HMT451S6MFR6A-PB 2:623 0:000 Type 17 Index = 1 2:623 0:000 SmbiosTable.Type17->Speed = 1600MHz 2:623 0:000 SmbiosTable.Type17->Size = 8192MB 2:623 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 DIMM1 2:623 0:000 SmbiosTable.Type17->Vendor = Kingston 2:623 0:000 SmbiosTable.Type17->SerialNumber = 5A060A8A 2:623 0:000 SmbiosTable.Type17->PartNumber = KHX1600C9S3L/8G 2:623 0:000 Boot status=0 2:623 0:000 Running on: 'Aspire V5-573G' with board 'Dazzle_HW' 2:623 0:000 === [ GetCPUProperties ] ================================== 2:623 0:000 CPU Vendor = 756E6547 Model=40651 2:623 0:000 The CPU supported SSE4.1 2:623 0:000 BrandString = Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz 2:623 0:000 The CPU supported turbo 2:623 0:000 MSR 0x35 20004 2:623 0:000 MSR 0xE2 before patch 1E008405 2:623 0:000 MSR 0xE2 is locked, PM patches will be turned on 2:623 0:000 MSR 0xCE 0008083D_F3011800 2:623 0:000 corrected FLEX_RATIO = 0 2:623 0:000 MSR 0x1B0 00000000 2:623 0:000 FSBFrequency = 71 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz 2:623 0:000 MaxDiv/MinDiv: 24.0/8 2:623 0:000 Turbo: 27/27/27/30 2:623 0:000 Features: 0xBFEBFBFF 2:623 0:000 Threads: 4 2:623 0:000 Cores: 2 2:623 0:000 FSB: 100 MHz 2:623 0:000 CPU: 1700 MHz 2:623 0:000 TSC: 1700 MHz 2:623 0:000 PIS: 100 MHz 2:623 0:000 ExternalClock: 25 MHz 2:623 0:000 === [ GetDevices ] ======================================== 2:623 0:000 GOP found at: PcieRoot(0x0)/Pci(0x2,0x0)/AcpiAdr(0x80010100) 2:623 0:000 PCI (00|00:00.00) : 8086 0A04 class=060000 2:623 0:000 PCI (00|00:02.00) : 8086 0A16 class=030000 2:623 0:000 - GOP: Provided by device 2:623 0:000 - GFX: Model=Intel HD Graphics 4400 (Intel) 2:623 0:000 PCI (00|00:03.00) : 8086 0A0C class=040300 2:623 0:000 PCI (00|00:14.00) : 8086 9C31 class=0C0330 2:623 0:000 PCI (00|00:16.00) : 8086 9C3A class=078000 2:623 0:000 PCI (00|00:1B.00) : 8086 9C20 class=040300 2:623 0:000 PCI (00|00:1C.00) : 8086 9C10 class=060400 2:623 0:000 PCI (00|00:1C.02) : 8086 9C14 class=060400 2:623 0:000 PCI (00|04:00.00) : 168C 0034 class=028000 2:623 0:000 - WIFI: Vendor=Atheros 2:623 0:000 PCI (00|00:1C.03) : 8086 9C16 class=060400 2:623 0:000 PCI (00|05:00.00) : 10EC 5287 class=FF0000 2:623 0:000 PCI (00|05:00.01) : 10EC 8168 class=020000 2:623 0:000 - LAN: 0 Vendor=Realtek 2:623 0:000 PCI (00|00:1C.04) : 8086 9C18 class=060400 2:624 0:000 PCI (00|01:00.00) : 10DE 0FE4 class=030200 2:624 0:000 PCI (00|00:1D.00) : 8086 9C26 class=0C0320 2:624 0:000 PCI (00|00:1F.00) : 8086 9C43 class=060100 2:624 0:000 PCI (00|00:1F.02) : 8086 9C03 class=010601 2:624 0:000 PCI (00|00:1F.03) : 8086 9C22 class=0C0500 2:624 0:000 === [ GetDefaultSettings ] ================================ 2:624 0:000 Clover load options size = 0 bytes 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G--00-00-00-00-00-00. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G-1700. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Dazzle_HW. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Dazzle_HW-1700. Dir not exists 2:624 0:000 set OEMPath by default: EFI\CLOVER 2:637 0:012 EFI\CLOVER\config.plist loaded: Success 2:637 0:000 === [ GetListOfThemes ] =================================== 2:637 0:000 === [ Found config plists ] =============================== 2:637 0:000 - config.plist 2:637 0:000 === [ GetEarlyUserSettings ] ============================== 2:637 0:000 timeout set to 0 2:637 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 2:637 0:000 Default theme: embedded 2:637 0:000 === [ LoadDrivers ] ======================================= 2:637 0:000 === [ InitScreen ] ======================================== 2:637 0:000 Console modes reported: 4, available modes: 2:637 0:000 - [01]: 80x25 2:637 0:000 - [02]: 80x50 2:637 0:000 - [03]: 100x31 2:637 0:000 - [04]: 240x56 (current mode) 2:637 0:000 SetScreenResolution: 1920x1080 - already set 2:637 0:000 SetScreenResolution: 1920x1080 - already set 2:637 0:000 reinit: self device path=PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) 2:637 0:000 === [ GetMacAddress ] ===================================== 2:637 0:000 === [ ScanSPD ] =========================================== 2:637 0:000 Scanning SMBus [8086:9C22], mmio: 0xB3619004, ioport: 0x5040, hostc: 0x1 2:656 0:018 Slot: 2 Type 24 8192MB 1600MHz Vendor=Kingston PartNo=KHX1600C9S3L8G SerialNo=050A0006000A080A 2:657 0:000 === [ GetAcpiTablesList ] ================================= 2:657 0:000 Get Acpi Tables List from RSDT: 2:657 0:000 - [00]: FACP ACRPRDCT len=268 2:657 0:000 - [01]: UEFI ACRPRDCT len=566 2:657 0:000 - [02]: FPDT ACRPRDCT len=68 2:657 0:000 - [03]: ASF! ACRPRDCT len=165 2:657 0:000 - [04]: HPET ACRPRDCT len=56 2:657 0:000 - [05]: APIC ACRPRDCT len=140 2:657 0:000 - [06]: MCFG ACRPRDCT len=60 2:657 0:000 - [07]: BOOT ACRPRDCT len=40 2:657 0:000 - [08]: LPIT ACRPRDCT len=148 2:657 0:000 - [09]: ASPT ACRPRDCT len=52 2:657 0:000 - [10]: DBGP ACRPRDCT len=52 2:657 0:000 - [11]: SSDT ACRPRDCT len=1337 2:657 0:000 - [12]: SSDT ACRPRDCT len=2776 2:657 0:000 - [13]: SSDT ACRPRDCT len=12013 2:657 0:000 - [14]: SSDT ACRPRDCT len=11433 2:657 0:000 - [15]: SSDT ACRPRDCT len=2230 2:657 0:000 Calibrated TSC Frequency = 2394459554 = 2394MHz 2:657 0:000 === [ GetUserSettings ] =================================== 2:657 0:000 === [ Found DSDT tables ] ================================= 2:657 0:000 === [ ScanVolumes ] ======================================= 2:657 0:000 Found 8 volumes with blockIO 2:657 0:000 - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0) 2:659 0:001 Result of bootcode detection: bootable Linux (grub,linux) 2:659 0:000 - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0) 2:660 0:001 Result of bootcode detection: bootable unknown (legacy) 2:660 0:000 - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,8017BD66-1E24-4B31-8E09-BC49BECD6CC4,0x800,0x21330000) 2:661 0:001 Result of bootcode detection: bootable Windows (vista,win) 2:661 0:000 - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,82F3B738-65E9-458E-B2F1-BB55D4F00885,0x21331000,0x3D0800) 2:663 0:001 - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,E701DCD8-E3C5-4BFA-B61B-BFF4D80153FD,0x21701800,0x18C4F000) 2:664 0:001 - [05]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,4DB1239A-A9D7-4045-A162-7EF1B3A5913B,0x3A350C21,0x3A3B616E) 2:665 0:001 Result of bootcode detection: bootable Windows (vista,win) 2:665 0:000 - [06]: Volume: PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0) 2:677 0:011 Result of bootcode detection: bootable unknown (legacy) 2:677 0:000 USB volume 2:677 0:000 USB volume 2:677 0:000 - [07]: Volume: PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) 2:688 0:011 Result of bootcode detection: bootable unknown (legacy) 2:688 0:000 USB volume 2:688 0:000 USB volume 2:688 0:000 This is SelfVolume !! 2:688 0:000 PutNvramPlistToRtVars: nvram.plist not found 2:689 0:000 No AudioIoProtocols, status=Not Found 2:689 0:000 === [ InitTheme ] ========================================= 2:689 0:000 use daylight theme 2:689 0:000 using embedded theme 2:689 0:000 got embedded sound 2:689 0:000 Channels: 2 Sample rate: 8000 Hz Bits: 16 2:689 0:000 output to channel 0 with volume 70, len=25600 2:689 0:000 sound channels=2 bits=16 freq=8000 2:689 0:000 sound converted to 48kHz 2:689 0:000 not found AudioIo to play 2:689 0:000 sound play end with status=Not Found 2:690 0:001 Using embedded font: Success 2:691 0:000 theme inited 2:691 0:000 Chosen embedded theme 2:691 0:000 after NVRAM boot-args= 2:691 0:000 === [ Dump SMC keys from NVRAM ] ========================== 2:691 0:000 no AppleSMC protocol 2:691 0:000 Entry scan disabled 2:691 0:000 === [ AddCustomTool ] ===================================== 2:692 0:000 === [ GetEfiBootDeviceFromNvram ] ========================= 2:692 0:000 Default boot entry not found 2:692 0:000 DefaultIndex=-1 and MainMenu.EntryCount=4 2:973 0:281 GUI ready  
    • By tluck
      Lenovo T460 macOS with Clover Guide
      Latest Release on GitHub (February 2020) Updated to Clover r5104 Updated Lilu based kexts - Lilu, ALC, WEG Updated acidanthera VoodooPS2 kext v2.1.1 the older 1.9 to the Misc Folder as an option.
        Various Tweaks over Last months The zip file is a complete Clover ESP (/EFI) bundle and kext pack for the Lenovo T460. The current file bundle is tested on Sierra. 
      Note: I never got the GFX fully working on El Capitan. 
      Full Clover file set - config.plist etc. Includes all custom kexts Includes custom DSDT/SSDT scripts and patches Utility scripts The zip bundles are posted to GitHub: https://github.com/tluck/Lenovo-T460-Clover/releases
      Caveat: The T460 systems used here was configured with: i5-6300U, Intel HD Graphics 520, 1920x1080 touch screen. If you have a different system model, then extract the ACPI files and use the included scripts to create a set of files consistent with your system type and BIOS version. See below for details.
      Credits: RehabMan, Shmilee, vusun123, TimeWalker, Mieze from which, much of their work and help is/was was used to get the T460 to this point.
      Devices and aspects working:
      Ethernet -  Intel I219LM is enabled via IntelMausiEthernext.kext WiFi/BT - substitute the Intel WiFi/BT with a compatible Broadcom or Atheros chip Audio - ALC293 codec implemented via AppleALC.kext (the old AppleHDA_ALC293 and CodecCommander kexts are not needed) PS2 - ClickPad + TrackPoint + all 3 buttons - using a modified VoodooPS2Controller to support new layouts - and added some custom Fn key maps based on 440/450 dsdt USB - implemented via custom SSDT + USBInjectAll kext. All USB3/USB2 ports are intel-based and work -  3 external USB and internal Camera, BT, etc  Sleep/Wake - the sleepwatcher package and custom sleep/wake scripts are used to help with sleep/wake for BT and PS2 devices. Note: have not tried to implement the SD card reader - no driver found.
      ACPI Files
      New Installation - Steps and Details
      Part 1 - OS Installation
      Part 2- Post OS Installation and Setup
      Notes on Custom Kexts
       
    • By Jancey
      I used this command: diskutil info disk0s2 | grep -i "Partition UUID" | rev | cut -d' ' -f 1 | rev

      But I accidentally removed the wrong disk and now my main windows drive is not appearing in the bootloader. I can't figure out how to get it back. I tried resetting my windows drive, but I kept getting an error. I also reset my mac and reinstalled Catalina.
    • By gengstapo
      @Hervé
       
      Im having similar issue with my HS setup, dell latitute 3480, i5-7200U
      Once the hdmi plugged in, the laptop display went blank, only could see the external tv
      But, when i put my laptop to sleep & wake up again, both screen got display (hdmi still connected)
      Even the hdmi could be plugged off & in (after sleep), the laptop display is fine
       
      What could be the culprit?
      Dell’s MacBook Pro IORegistry.zip
      config.plist.zip
    • By TomZanna
      Hi, I'm trying to install Mac Os Catalina on a HP 550-132NL.
      The system has:
      i7-6700
      RAM 12 GB
      GT 730
      LAN Realtek RTL8161
      ALC3863
       
      It passes the verbose phase but after the Apple logo goes away, it gets stuck on a grey screen and I can only move the pointer.
      Can I try to boot with the iGPU?
       
      origin.zip
      CLOVER_dGPU_USB_3.zip
×