Jump to content
K0gen

Lenovo ThinkPad T420 with UEFI Only

4,870 posts in this topic

Recommended Posts

 @Hipopalamus

 

good to hear things worked out for you.

well the ThinkVantage (Blue) button is mapped in the DSDT to a function/run the fan at full speed 4500 rpm rather than variable speed. i often push the button when i am transcoding or encoding video for example as it does get a bit hot. what SSDT are you using? the script in the zip bundle does a better job of creating full range of P-states IMO i.e. create custom SSDT to match your CPU.

 

my system runs around 40C idle  - fans are at +/- 1950rpm. when i run it with my external monitor it goes up 2-3 degrees and fans run faster.  so 50 degrees idle does seems a bit high

Share this post


Link to post
Share on other sites
Advertisement

Just want to thank everyone in this thread!

 

After 2 weeks I succesfully built a nice hackintosh. I would say a very stable system. Everything i need, except wifi (will get a usb-wifi soon) and the fn key. The rest is quite good, even power management - which was a problem im my old hackintosh.

 

My system:

Lenovo T430 23426QU

Share this post


Link to post
Share on other sites

@tluck would it be possible to add :

 

  • win 8.1 boot stuff in the next pack (a ready to use dual boot clover config)?
  • and GUI/Custom/Entries to make clover GUI more sympathetic (name of partition)
    something like that

  • post-688682-0-61824400-1385994263_thumb.png or as you want

 

​<dict><key>Disabled</key> <false/> <key>FullTitle</key> <string>OS X 10.9 - OSX+</string> <key>Hidden</key> <false/> <key>Hotkey</key> <string>m</string> <key>InjectKexts</key> <false/> <key>NoCaches</key> <false/> <key>Type</key> <string>OSX</string> <key>Volume</key> <string>OSX+</string> </dict> <dict> <key>Disabled</key> <false/> <key>FullTitle</key> <string>OS X 10.9 - Recovery</string> <key>Hidden</key> <false/> <key>Hotkey</key> <string>r</string> <key>InjectKexts</key> <true/> <key>NoCaches</key> <false/> <key>Type</key> <string>OSXRecovery</string> <key>Volume</key> <string>Recovery</string> </dict> <dict> <key>Disabled</key> <false/> <key>FullTitle</key> <string>OS X 10.8 - Macintosh HD</string> <key>Hidden</key> <false/> <key>Hotkey</key> <string>l</string> <key>InjectKexts</key> <false/> <key>NoCaches</key> <false/> <key>Type</key> <string>OSX</string> <key>Volume</key> <string>Macintosh HD</string> </dict>

 

 

 

 

 

I've  tested Yosemite on vmware, icons are not as beautiful as under previous OS X 

I've tested a bootable 10.10 usb key installer, i'll wait a bit more to make upgrade my main disk ;)

 

 

I found this interesting :

http://www.insanelymac.com/forum/topic/298027-guide-aio-guides-for-hackintosh/?do=findComment&comment=2019704

Share this post


Link to post
Share on other sites

@tetonne - sure. i am open to what will help people build a hack. i think the zip and guide are pretty good right now, if i do say so myself!

 

i suppose we can add a 2nd zip for MicroSoft boot. with some instructions on how to build/create/patch the bcd. i thought the Windows install does all that for you - meaning puts what it needs into the ESP?  I don't know how much value a generic set of files will be .. meaning I don't know how to make it super easy. since the bcd file must point to your specific partition GUID, right? so if you have some more ideas please share. 

 

i don't quite understand the next 2 bullets requests - looks like something out Clover Configuration GUI (to add more partitions? for older versions?)

 

Note: the current setup (config.plist + kexts) can boot OSX, RecoveryHD and Installation with the same/common single configuration. and i don't get any odd-ball icons that are messing up the view!

 

 

and i agree, 10.10 use a much flatter 2D iPhone-ish looking UI. it will take some getting used to. but so far it works just fine on the T420. I like what they say will be there when 10.10 is GA, there will be some nice new iCloud doc sharing features that were sorely missing.

Share this post


Link to post
Share on other sites

Hi all-

 

I was able (with a little help) to get an F5521gw WWAN card to work "properly" in OSX as a reported WWAN card rather than a simple USB dial-up modem. I can offer the kext if anyone needs it.

 

Also, I assume that upgrading to 10.9.4 is not a good idea. Would it trash the current build?

 

My X220 still working like a champ. Best hack I've built to date.

Share this post


Link to post
Share on other sites

@tetonne - sure. i am open to what will help people build a hack. i think the zip and guide are pretty good right now, if i do say so myself!

 

i suppose we can add a 2nd zip for MicroSoft boot. with some instructions on how to build/create/patch the bcd. i thought the Windows install does all that for you - meaning puts what it needs into the ESP?  I don't know how much value a generic set of files will be .. meaning I don't know how to make it super easy. since the bcd file must point to your specific partition GUID, right? so if you have some more ideas please share. 

 

i don't quite understand the next 2 bullets requests - looks like something out Clover Configuration GUI (to add more partitions? for older versions?)

 

Note: the current setup (config.plist + kexts) can boot OSX, RecoveryHD and Installation with the same/common single configuration. and i don't get any odd-ball icons that are messing up the view!

 

 

and i agree, 10.10 use a much flatter 2D iPhone-ish looking UI. it will take some getting used to. but so far it works just fine on the T420. I like what they say will be there when 10.10 is GA, there will be some nice new iCloud doc sharing features that were sorely missing.

For sure your pack is great!

 

the idea of the 1st bullet is a extra added to the pack for dual boot on a same HD  (if possible and if it's easy to create)

the 2nd bullet was about adding GUI/Custom/Entries

such as 

<dict>

<key>Disabled</key>

<false/>

<key>FullTitle</key>

<string>OS X 10.9 - Power</string>

<key>Hidden</key>

<false/>

<key>Hotkey</key>

<string>m</string>

<key>InjectKexts</key>

<false/>

<key>NoCaches</key>

<false/>

<key>Type</key>

<string>OSX</string>

<key>Volume</key>

<string>Power</string>

</dict>

<dict>

<key>Disabled</key>

<false/>

<key>FullTitle</key>

<string>OS X 10.9 - Recovery</string>

<key>Hidden</key>

<false/>

<key>Hotkey</key>

<string>r</string>

<key>InjectKexts</key>

<true/>

<key>NoCaches</key>

<false/>

<key>Type</key>

<string>OSXRecovery</string>

<key>Volume</key>

<string>BFF540AD-1ED4-40D8-B7FC-BD34A3643D4F</string>

</dict>

 
this is for cosmetic reason and can be useful for trying 10.10 on a other hd
Thnaks again for the time you spend and your great pack
 
10.94 is out ;) i'm downloading it right now

Share this post


Link to post
Share on other sites

All - just posted the 10.9.4 Kext pack here: Clover UEFI on T420 Guide

 

I downloaded the update pack from appstore.  no problems. (other than have to replace 2 kexts)

 

30-June-2014 - 10.9.4 update

  • Clover updated to v2747
  • 10.9.4 - 2 custom kexts updated in 10.9.4 since 10.9.3 -  AppleHDA.kext and BroadcomBluetooth kext must be replaced you do the Update installation. 

Share this post


Link to post
Share on other sites

First off, thanks for the incredible guide. Got my new (used) T420 up and running quick.

 

Can anyone recommend any replacement wifi cards for the T420? I know I'm gonna have to mod the bios to get around the whitelist, but are there any (cheap, preferably) ones with good hackintosh compatability? One with a working modded bios already available would be even better.

Share this post


Link to post
Share on other sites

@tntkj

 

you are welcome! i just used my own guide this week, as I bought a 2nd T420 (used from ebay) for my son.

 

and then in about 5 minutes, I replaced the intel wifi with a Atheros AR9280 (AR5BHB92). these are the same cards used in a number of Dell (DW1515) or HP Pavilion laptops. i bought it used for about $6 US.  

 

from the windows install it came with, i flashed it up to original bios v1.46 and then flashed it with the modded bios. got the bits with the 2 items here. (see sovem's post for the rar file on mediafire)

 

there may be other cards, but this worked for me now on both systems. 

Share this post


Link to post
Share on other sites

I'm using a DW1515 WiFi card in my Lenovo X220 with 100% success after the bios mod.

 

This along with tluck's guide makes for an ideal hackintosh solution that WORKS. Very stable and reliable.

Share this post


Link to post
Share on other sites

@tluck,

 

I've been running one of your early guides with clover uefi on this thread, and I remember that at one time the more stable way was just to run it with a usb with an ESP on it with the clover boot files. Is this still necessary to eliminate some bugs that were associated running a ESP off the HD?

 

Also, could you quite simply explain the process of installation to dual boot win7 + mac os the most updated way with the help of your mega-post?

 

 

Concerns....

 

I have 1600x900 Res, t420 model type 4178-6WUS......

Is DSDT Patching required for hardware bugs? Is SSDT required? etc.

Share this post


Link to post
Share on other sites

@Adrenalation - well good question. Somewhere around 10.9.2 + Clover fixes, the ESP (UEFI) problems have disappeared. i have resumed boot from HD and have not had a issue in months. i suggest you download the latest zip as it will the most recent clover config, dsdt and other kexts for 10.9.4.

 

i find the easiest way dual boot is build a UEFI USB installer for MS windows (i like rufus tool) from the iso.  install windows to a GPT disk. when you format the target partition for NTFS, remove the MSR windows adds before you install windows and it will put what it need in /EFI/Microsoft/Boot. then follow the guide for OSX (replace /EFI/BOOT and /EFI/CLOVER with the zip.  its pretty much that easy.

Share this post


Link to post
Share on other sites

@Adrenalation - well good question. Somewhere around 10.9.2 + Clover fixes, the ESP (UEFI) problems have disappeared. i have resumed boot from HD and have not had a issue in months. i suggest you download the latest zip as it will the most recent clover config, dsdt and other kexts for 10.9.4.

 

i find the easiest way dual boot is build a UEFI USB installer for MS windows (i like rufus tool) from the iso.  install windows to a GPT disk. when you format the target partition for NTFS, remove the MSR windows adds before you install windows and it will put what it need in /EFI/Microsoft/Boot. then follow the guide for OSX (replace /EFI/BOOT and /EFI/CLOVER with the zip.  its pretty much that easy.

Are Description Tables included in the EFI directory zip? Does this also mean no more renaming your folder to your model name .......such as 4178-6WUS?.

 

By the way,...... Great Progress!

Share this post


Link to post
Share on other sites

Hi all

 

I am running a Thinkpad 520 and so far the guide for the 420 has been spot on.

 

I am how ever having problems booting once I install Clover to the hard drive.

 

I get an error withiobluetoothhcicontroller searchfortransporteventtimeouthandler

 

I have tried -f -v npci=0x2000 with no luck.

 

Have any of you had this?

 

Thanks

 

Terran

Share this post


Link to post
Share on other sites

@Terran Brown

 

glad its working for you (mostly).

 

as far as bluetooth, i would try 2 things to get boot from HD... make sure you can boot without BT.  so test by turning off BT in the BIOS and then boot. depending on what version of OSX,  BT kexts may get stuck if the vendor/product is not in the Info.plist. 

 

what OS version are you using?

did you install all the kexts onto your HD?

 

there is a BT kext mod that puts in the matching vendor and product for T420 - i changed product 8532 to 8575 to match my BT card.

/System/Library/Extensions/IOBluetoothFamily.kext/Contents/PlugIns/BroadcomBluetoothHostControllerUSBTransport.kext

 

see Contents/Info.plist

 

 

to force without cache boot, use the space bar on the disk selection to choose your mode.

note: the npci flag is not a clover thing afaik.

 

 

 

Share this post


Link to post
Share on other sites

Hi.

 

I had the BT disabled in the bios and off on the switch but there was no difference.

 

I managed to suss it out ( for any one else following) I didn't install the Bluetooth kext...

 

My last problem is sound... I belive voodoo works with layout 12 but Ill have a look at that later this week.

 

Thanks for answering back

 

Terran

Share this post


Link to post
Share on other sites

@Terran - cool. what was the trick?

 

audio - what is the audio chip/codec on the T520? is it not the conexant - . if so the audio kext from the zip bundle should just work?

 

edit - i just saw that 520 is conexant 20672 (vs 20590 on the T420).

so yeah voodooHDA or it may be very simple to just patch the binary for that codec id.

Share this post


Link to post
Share on other sites

@tluck

 

So I'm up and running. I remember reading somewhere in the thread that there was a way to override the DSDT located in ESP/EFI/Clover/ACPI/patched/..... ..... something to do with config.nodsdt.plist. Would the included DSDT in the given directory be based on your system? I'd like to create a DSDT based off of my system with current patches. Is this possible? Already ran SSDT generator. System works like a champ.

Share this post


Link to post
Share on other sites

@adrenalation

 

Catch up with some of the latest pages in the thread, like the last 4-6. Tluck made changes to his pack so that we'd only need to use the one config.

Share this post


Link to post
Share on other sites

@adrenalation. 

 

there are essentially 2 config files -

config.1600x900.plist is expected to use the pre-compiled DSDT

and

config.nodsdt.plist (for other testing or dsdt development etc).

 

the config.nodsdt.plist (which is almost identical to config.1600x900.plist) that one can use if one wishes to start from the BIOS DSDT vs the pre-modified DSDT. 

 

And sheep_reaper is correct of course, I simplified the clover configuration so that you don't need to mess with OEM names etc. with a single config.plist for installing (USB) and on the HD. 

 

the pre-modified/customized DSDT.aml (and readable source .dsl ) is /EFI/CLOVER/ACPI/patched (after you rename the ACPI.MxY folder to match your LCD).

Clover reads this DSDT.aml and then may still do a few extra tweaks on the fly to fix up other items. So essentially clover starts with a pre-modified dsdt and patches it according to the settings in the config.plist 

 

DSDT less - (not really) it just means startup clover with BIOS original DSDT.

 

to use: 

rename ACPI to ACPI.NU (to avoid using the pre-mod DSDT)

rename config.nodsdt.plist to config.plist (rename the other working one for now)

reboot

 

- clover will patch up the DSDT on the fly. however the battery will not work as it can't fully patch to include some of the highly custom tweaks added in the pre-modified DSDT. 

Share this post


Link to post
Share on other sites

Great explanation on that one. ^^ Sound output does not work from the right headphone output port. Any ideas?

Share this post


Link to post
Share on other sites

@adrenalation - make sure you pick the right output device port. there will be 2 outputs both named headphones (if you plug something in the side )

the 2nd one is for the docking station. and the other is the side of the laptop-  so pick that one (that one changes from Internal speaker)

 

No no. I really mean it :) ! There is only one entry for headphones, but that one yields no sound output through my laptop headphone output. Here's a screen. Only one entry, doesn't work......weird. Screen_Shot_2014_07_09_at_8_57_41_PM.png

Share this post


Link to post
Share on other sites

@Adrenalation -

 

Your picture looks exactly like on mine - go figure! ;)

 

the Output named Internal Speakers will auto-detect a headphone when put into the side port. select "internal speakers" and then plug in a headphone. and then look as this again. put the plug in and out a few times to see it switch names.

 

the Output named Headphones is the output port on a Dock (when Docked) - so you can use this if you have docking station. i plug my speakers in this.

Share this post


Link to post
Share on other sites

Ok so just a couple hindrances I'm still dealing with; no audio out the right port (again, I did what I could; not autodetecting), and I finally tried to install windows after my OS X installation, and windows disk setup before installation claims that my disk is MBR format, when it actually is GPT....... UEFI installations can only be installed to GPT disks. Again, can anyone confirm i'll have to format my main disk again with Windows First, and THEN install OS X?

 

Here's a screen to show what my partition setup looks like

 

Screen_Shot_2014_07_11_at_8_58_14_AM.png

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Klaidonis
      I am making a minimal Clover build for the fastest boot possible with the boot6 file in legacy mode.
      While looking at the preboot.log, I noticed that there is a line without explanation (at 0:892). Apparently, whatever it is, the execution time of it is close to 2 seconds, more than 55% of the total logged boot time in the current configuration. This does not change whether I use USB 2 or USB 3 port.
       
      Is there a way to eliminate or speed up the above? Also, is there anything else you can suggest to improve the performance based on the below log file? Which moment in the boot process corresponds to the start time in preboot.log?  
      The last thing I would like to understand is the delay/timeout after the boot6 file has loaded, and the number 6 disappears from the screen. For about 2 seconds or slightly less, I can press any key, and then it will enter the BIOS-like interface from the boot6 file. Without further knowledge, it seems like those 2 seconds are just delay time, and only after that is CLOVERX64.efi actually started, which, I presume, is approximately when the preboot.log timer starts. So, if the aforementioned is correct, can I get rid of this delay as well? Note that I am using the boot1f32 file to chain-load boot6, which does not include the initial 2-second wait period for a keypress.
       
      === preboot.log ===
      0:100 0:100 MemLog inited, TSC freq: 2394459554 0:100 0:000 CPU was calibrated with ACPI PM Timer 0:100 0:000 LegacyRegion2: Chipset/proc: 0x0A048086 0:100 0:000 Next Generation Core processors (PAM 0x80-0x86) 0:100 0:000 Test PAM1=(0x41=90, 0x5a=90, 0x81=11, 0x91=00) at chipset 0A048086 0:100 0:000 , Install = Success 0:112 0:012 BiosVideoDriverBindingStart! 0:112 0:000 BiosVideoCheckForVbe 0:112 0:000 EdidOverride not found 0:121 0:009 Edid1+ 0:121 0:000 found Detail Timing 1920x1080 0:121 0:000 timing string after 0xFE:AUO 0:121 0:000 timing string after 0xFE:B156HAN01.2 0:122 0:000 0 1280x1024 attr=9B - ok, edid- 0:122 0:000 1 1024x768 attr=9B - ok, edid-, 1024x768, working, highest, pref=1 0:122 0:000 2 640x480 attr=9B - ok, edid-, 640x480, working 0:122 0:000 3 800x600 attr=9B - ok, edid-, 800x600, working 0:123 0:000 4 1920x1080 attr=9B - ok, edid+, working, highest, pref=4 0:123 0:000 BV new mode: 4 1920x1080 0:398 0:275 SetMode pref 4 (4) = Success 0:892 0:493 VGA Pci.Hdr.Command=6 - not enabled 2:623 1:731 2:623 0:000 Now is 21.02.2020, 13:03:21 (GMT) 2:623 0:000 Starting Clover revision: 5103 (master, commit 3f3b85da0) on CLOVER EFI 2:623 0:000 Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t GCC53 | -D NO_GRUB_DRIVERS_EMBEDDED --conf=/Users/sergey/src/CloverHackyColor/Conf -D USE_LOW_EBDA -a X64 -b RELEASE -t GCC53 -n 5 | OS: 10.14.6] 2:623 0:000 SelfDevicePath=PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) @940C9698 2:623 0:000 SelfDirPath = \EFI\CLOVER 2:623 0:000 SimpleTextEx Status=Success 2:623 0:000 === [ Get Smbios ] ======================================== 2:623 0:000 Type 16 Index = 0 2:623 0:000 Total Memory Slots Count = 2 2:623 0:000 Type 17 Index = 0 2:623 0:000 SmbiosTable.Type17->Speed = 1600MHz 2:623 0:000 SmbiosTable.Type17->Size = 4096MB 2:623 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 DIMM0 2:623 0:000 SmbiosTable.Type17->Vendor = Hynix 2:623 0:000 SmbiosTable.Type17->SerialNumber = 00000000 2:623 0:000 SmbiosTable.Type17->PartNumber = HMT451S6MFR6A-PB 2:623 0:000 Type 17 Index = 1 2:623 0:000 SmbiosTable.Type17->Speed = 1600MHz 2:623 0:000 SmbiosTable.Type17->Size = 8192MB 2:623 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 DIMM1 2:623 0:000 SmbiosTable.Type17->Vendor = Kingston 2:623 0:000 SmbiosTable.Type17->SerialNumber = 5A060A8A 2:623 0:000 SmbiosTable.Type17->PartNumber = KHX1600C9S3L/8G 2:623 0:000 Boot status=0 2:623 0:000 Running on: 'Aspire V5-573G' with board 'Dazzle_HW' 2:623 0:000 === [ GetCPUProperties ] ================================== 2:623 0:000 CPU Vendor = 756E6547 Model=40651 2:623 0:000 The CPU supported SSE4.1 2:623 0:000 BrandString = Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz 2:623 0:000 The CPU supported turbo 2:623 0:000 MSR 0x35 20004 2:623 0:000 MSR 0xE2 before patch 1E008405 2:623 0:000 MSR 0xE2 is locked, PM patches will be turned on 2:623 0:000 MSR 0xCE 0008083D_F3011800 2:623 0:000 corrected FLEX_RATIO = 0 2:623 0:000 MSR 0x1B0 00000000 2:623 0:000 FSBFrequency = 71 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz 2:623 0:000 MaxDiv/MinDiv: 24.0/8 2:623 0:000 Turbo: 27/27/27/30 2:623 0:000 Features: 0xBFEBFBFF 2:623 0:000 Threads: 4 2:623 0:000 Cores: 2 2:623 0:000 FSB: 100 MHz 2:623 0:000 CPU: 1700 MHz 2:623 0:000 TSC: 1700 MHz 2:623 0:000 PIS: 100 MHz 2:623 0:000 ExternalClock: 25 MHz 2:623 0:000 === [ GetDevices ] ======================================== 2:623 0:000 GOP found at: PcieRoot(0x0)/Pci(0x2,0x0)/AcpiAdr(0x80010100) 2:623 0:000 PCI (00|00:00.00) : 8086 0A04 class=060000 2:623 0:000 PCI (00|00:02.00) : 8086 0A16 class=030000 2:623 0:000 - GOP: Provided by device 2:623 0:000 - GFX: Model=Intel HD Graphics 4400 (Intel) 2:623 0:000 PCI (00|00:03.00) : 8086 0A0C class=040300 2:623 0:000 PCI (00|00:14.00) : 8086 9C31 class=0C0330 2:623 0:000 PCI (00|00:16.00) : 8086 9C3A class=078000 2:623 0:000 PCI (00|00:1B.00) : 8086 9C20 class=040300 2:623 0:000 PCI (00|00:1C.00) : 8086 9C10 class=060400 2:623 0:000 PCI (00|00:1C.02) : 8086 9C14 class=060400 2:623 0:000 PCI (00|04:00.00) : 168C 0034 class=028000 2:623 0:000 - WIFI: Vendor=Atheros 2:623 0:000 PCI (00|00:1C.03) : 8086 9C16 class=060400 2:623 0:000 PCI (00|05:00.00) : 10EC 5287 class=FF0000 2:623 0:000 PCI (00|05:00.01) : 10EC 8168 class=020000 2:623 0:000 - LAN: 0 Vendor=Realtek 2:623 0:000 PCI (00|00:1C.04) : 8086 9C18 class=060400 2:624 0:000 PCI (00|01:00.00) : 10DE 0FE4 class=030200 2:624 0:000 PCI (00|00:1D.00) : 8086 9C26 class=0C0320 2:624 0:000 PCI (00|00:1F.00) : 8086 9C43 class=060100 2:624 0:000 PCI (00|00:1F.02) : 8086 9C03 class=010601 2:624 0:000 PCI (00|00:1F.03) : 8086 9C22 class=0C0500 2:624 0:000 === [ GetDefaultSettings ] ================================ 2:624 0:000 Clover load options size = 0 bytes 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G--00-00-00-00-00-00. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G-1700. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Dazzle_HW. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Dazzle_HW-1700. Dir not exists 2:624 0:000 set OEMPath by default: EFI\CLOVER 2:637 0:012 EFI\CLOVER\config.plist loaded: Success 2:637 0:000 === [ GetListOfThemes ] =================================== 2:637 0:000 === [ Found config plists ] =============================== 2:637 0:000 - config.plist 2:637 0:000 === [ GetEarlyUserSettings ] ============================== 2:637 0:000 timeout set to 0 2:637 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 2:637 0:000 Default theme: embedded 2:637 0:000 === [ LoadDrivers ] ======================================= 2:637 0:000 === [ InitScreen ] ======================================== 2:637 0:000 Console modes reported: 4, available modes: 2:637 0:000 - [01]: 80x25 2:637 0:000 - [02]: 80x50 2:637 0:000 - [03]: 100x31 2:637 0:000 - [04]: 240x56 (current mode) 2:637 0:000 SetScreenResolution: 1920x1080 - already set 2:637 0:000 SetScreenResolution: 1920x1080 - already set 2:637 0:000 reinit: self device path=PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) 2:637 0:000 === [ GetMacAddress ] ===================================== 2:637 0:000 === [ ScanSPD ] =========================================== 2:637 0:000 Scanning SMBus [8086:9C22], mmio: 0xB3619004, ioport: 0x5040, hostc: 0x1 2:656 0:018 Slot: 2 Type 24 8192MB 1600MHz Vendor=Kingston PartNo=KHX1600C9S3L8G SerialNo=050A0006000A080A 2:657 0:000 === [ GetAcpiTablesList ] ================================= 2:657 0:000 Get Acpi Tables List from RSDT: 2:657 0:000 - [00]: FACP ACRPRDCT len=268 2:657 0:000 - [01]: UEFI ACRPRDCT len=566 2:657 0:000 - [02]: FPDT ACRPRDCT len=68 2:657 0:000 - [03]: ASF! ACRPRDCT len=165 2:657 0:000 - [04]: HPET ACRPRDCT len=56 2:657 0:000 - [05]: APIC ACRPRDCT len=140 2:657 0:000 - [06]: MCFG ACRPRDCT len=60 2:657 0:000 - [07]: BOOT ACRPRDCT len=40 2:657 0:000 - [08]: LPIT ACRPRDCT len=148 2:657 0:000 - [09]: ASPT ACRPRDCT len=52 2:657 0:000 - [10]: DBGP ACRPRDCT len=52 2:657 0:000 - [11]: SSDT ACRPRDCT len=1337 2:657 0:000 - [12]: SSDT ACRPRDCT len=2776 2:657 0:000 - [13]: SSDT ACRPRDCT len=12013 2:657 0:000 - [14]: SSDT ACRPRDCT len=11433 2:657 0:000 - [15]: SSDT ACRPRDCT len=2230 2:657 0:000 Calibrated TSC Frequency = 2394459554 = 2394MHz 2:657 0:000 === [ GetUserSettings ] =================================== 2:657 0:000 === [ Found DSDT tables ] ================================= 2:657 0:000 === [ ScanVolumes ] ======================================= 2:657 0:000 Found 8 volumes with blockIO 2:657 0:000 - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0) 2:659 0:001 Result of bootcode detection: bootable Linux (grub,linux) 2:659 0:000 - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0) 2:660 0:001 Result of bootcode detection: bootable unknown (legacy) 2:660 0:000 - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,8017BD66-1E24-4B31-8E09-BC49BECD6CC4,0x800,0x21330000) 2:661 0:001 Result of bootcode detection: bootable Windows (vista,win) 2:661 0:000 - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,82F3B738-65E9-458E-B2F1-BB55D4F00885,0x21331000,0x3D0800) 2:663 0:001 - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,E701DCD8-E3C5-4BFA-B61B-BFF4D80153FD,0x21701800,0x18C4F000) 2:664 0:001 - [05]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,4DB1239A-A9D7-4045-A162-7EF1B3A5913B,0x3A350C21,0x3A3B616E) 2:665 0:001 Result of bootcode detection: bootable Windows (vista,win) 2:665 0:000 - [06]: Volume: PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0) 2:677 0:011 Result of bootcode detection: bootable unknown (legacy) 2:677 0:000 USB volume 2:677 0:000 USB volume 2:677 0:000 - [07]: Volume: PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) 2:688 0:011 Result of bootcode detection: bootable unknown (legacy) 2:688 0:000 USB volume 2:688 0:000 USB volume 2:688 0:000 This is SelfVolume !! 2:688 0:000 PutNvramPlistToRtVars: nvram.plist not found 2:689 0:000 No AudioIoProtocols, status=Not Found 2:689 0:000 === [ InitTheme ] ========================================= 2:689 0:000 use daylight theme 2:689 0:000 using embedded theme 2:689 0:000 got embedded sound 2:689 0:000 Channels: 2 Sample rate: 8000 Hz Bits: 16 2:689 0:000 output to channel 0 with volume 70, len=25600 2:689 0:000 sound channels=2 bits=16 freq=8000 2:689 0:000 sound converted to 48kHz 2:689 0:000 not found AudioIo to play 2:689 0:000 sound play end with status=Not Found 2:690 0:001 Using embedded font: Success 2:691 0:000 theme inited 2:691 0:000 Chosen embedded theme 2:691 0:000 after NVRAM boot-args= 2:691 0:000 === [ Dump SMC keys from NVRAM ] ========================== 2:691 0:000 no AppleSMC protocol 2:691 0:000 Entry scan disabled 2:691 0:000 === [ AddCustomTool ] ===================================== 2:692 0:000 === [ GetEfiBootDeviceFromNvram ] ========================= 2:692 0:000 Default boot entry not found 2:692 0:000 DefaultIndex=-1 and MainMenu.EntryCount=4 2:973 0:281 GUI ready  
    • By tluck
      Lenovo T460 macOS with Clover Guide
      Latest Release on GitHub (February 2020) Updated to Clover r5104 Updated Lilu based kexts - Lilu, ALC, WEG Updated acidanthera VoodooPS2 kext v2.1.1 the older 1.9 to the Misc Folder as an option.
        Various Tweaks over Last months The zip file is a complete Clover ESP (/EFI) bundle and kext pack for the Lenovo T460. The current file bundle is tested on Sierra. 
      Note: I never got the GFX fully working on El Capitan. 
      Full Clover file set - config.plist etc. Includes all custom kexts Includes custom DSDT/SSDT scripts and patches Utility scripts The zip bundles are posted to GitHub: https://github.com/tluck/Lenovo-T460-Clover/releases
      Caveat: The T460 systems used here was configured with: i5-6300U, Intel HD Graphics 520, 1920x1080 touch screen. If you have a different system model, then extract the ACPI files and use the included scripts to create a set of files consistent with your system type and BIOS version. See below for details.
      Credits: RehabMan, Shmilee, vusun123, TimeWalker, Mieze from which, much of their work and help is/was was used to get the T460 to this point.
      Devices and aspects working:
      Ethernet -  Intel I219LM is enabled via IntelMausiEthernext.kext WiFi/BT - substitute the Intel WiFi/BT with a compatible Broadcom or Atheros chip Audio - ALC293 codec implemented via AppleALC.kext (the old AppleHDA_ALC293 and CodecCommander kexts are not needed) PS2 - ClickPad + TrackPoint + all 3 buttons - using a modified VoodooPS2Controller to support new layouts - and added some custom Fn key maps based on 440/450 dsdt USB - implemented via custom SSDT + USBInjectAll kext. All USB3/USB2 ports are intel-based and work -  3 external USB and internal Camera, BT, etc  Sleep/Wake - the sleepwatcher package and custom sleep/wake scripts are used to help with sleep/wake for BT and PS2 devices. Note: have not tried to implement the SD card reader - no driver found.
      ACPI Files
      New Installation - Steps and Details
      Part 1 - OS Installation
      Part 2- Post OS Installation and Setup
      Notes on Custom Kexts
       
    • By Jancey
      I used this command: diskutil info disk0s2 | grep -i "Partition UUID" | rev | cut -d' ' -f 1 | rev

      But I accidentally removed the wrong disk and now my main windows drive is not appearing in the bootloader. I can't figure out how to get it back. I tried resetting my windows drive, but I kept getting an error. I also reset my mac and reinstalled Catalina.
    • By gengstapo
      @Hervé
       
      Im having similar issue with my HS setup, dell latitute 3480, i5-7200U
      Once the hdmi plugged in, the laptop display went blank, only could see the external tv
      But, when i put my laptop to sleep & wake up again, both screen got display (hdmi still connected)
      Even the hdmi could be plugged off & in (after sleep), the laptop display is fine
       
      What could be the culprit?
      Dell’s MacBook Pro IORegistry.zip
      config.plist.zip
    • By TomZanna
      Hi, I'm trying to install Mac Os Catalina on a HP 550-132NL.
      The system has:
      i7-6700
      RAM 12 GB
      GT 730
      LAN Realtek RTL8161
      ALC3863
       
      It passes the verbose phase but after the Apple logo goes away, it gets stuck on a grey screen and I can only move the pointer.
      Can I try to boot with the iGPU?
       
      origin.zip
      CLOVER_dGPU_USB_3.zip
×