Jump to content
K0gen

Lenovo ThinkPad T420 with UEFI Only

4,870 posts in this topic

Recommended Posts

OK

 

Got sound to work by booting Clover without caches. But if I boot normally, sound doesn't work. I have rebuilt caches using Kext Utility in tluck's pack multiple times, but it doesn't seem to affect clover. Is there something I'm missing here? I would love to boot with caches if possible for full speed boot... Although on a SSD loading all kexts is not that long... ;-)

 

Brightness is still a no go. But the slider is present, PNLF is in DSDT, it's just the GPU part of the dsdt I'm missing...

Share this post


Link to post
Share on other sites
Advertisement

@SimonLL - 

 

 

get rid of npci boot args - your arg should be just

 

slide=0 or

-v slide=0

 

run

sudo touch /System/Library/Extensions 

 

this will rebuild your caches 

run

kextstat | grep HDA

 

to see if HDA is loaded.

 

i can only guess that those odd devices must have come from a previous preferences file audio midi tool may help.  

 

its ok to have these 2 devices HDEF (onboard-1) and HDAU (onboard-2 in the nvidia gfx0 branch) - my real mac has i7/HD Graphics/Nvidia and it has this tree

 

grep Device SystemDSDT.dsl 

        Device (PCI0)

            Device (MCHC)

            Device (P0P2)

                Device (GFX0)

                Device (HDAU)

            Device (IGPU)

                Device (DD01)

                Device (DD02)

                Device (DD03)

                Device (DD04)

                Device (DD05)

                Device (DD06)

                Device (DD07)

                Device (DD08)

            Device (SATA)

            Device (SBUS)

                Device (BUS0)

                    Device (MKY0)

                Device (BUS1)

            Device (LPCB)

                    Device (LNKA)

                    Device (LNKB)

                    Device (LNKC)

                    Device (LNKD)

                    Device (LNKE)

                    Device (LNKF)

                    Device (LNKG)

                    Device (LNKH)

                Device (DMAC)

                Device (FWHD)

                Device (HPET)

                Device (IPIC)

                Device (MATH)

                Device (LDRC)

                Device (CDRC)

                Device (RTC)

                Device (TIMR)

                Device (SMC)

                    Device (SMS0)

                Device (ALS0)

                Device (EC)

                    Device (SMB0)

                        Device (SBS0)

                    Device (BAT0)

            Device (HDEF)

            Device (RP01)

                Device (GIGE)

            Device (RP02)

                Device (ARPT)

            Device (RP03)

                Device (FRWR)

            Device (RP04)

                Device (EXCD)

            Device (IO10)

            Device (IO1X)

            Device (IIO0)

            Device (IIOX)

        Device (ADP1)

        Device (LID0)

        Device (PWRB)

        Device (PNLF)

        Device (SLPB)

        Device (PDRC)

        Device (CPBG)

            Device (IMCH)

Share this post


Link to post
Share on other sites

Finally, I just have Clover boot with no Cache argument. I tried rebuilding the caches multiple times, even deleted the file and rebuilt it. Only booting with no caches lets audio work. Not a big problem as I'm on a SSD. It takes 2sec longer to boot.

 

I've been busy installing Windows 7 on a second mSATA SSD. Now, I'm trying to figure out how to get Clover to boot it. Is there anything to do in the config.plist or the EFI partitions to make it work? I have 2 EFI partitions (one on each SSD). Clover is on the MacOS Drive. Not sure how to get this working.

Share this post


Link to post
Share on other sites

@SimonLL -

 

i and others have posted a few pages back how to dual boot windows with clover. its pretty easy IMO.  i still don't understand why you cannot build caches to boot for audio - very w

Share this post


Link to post
Share on other sites

@simon 

 

Since you're using a separate disk for W7, you are better off reinstalling 7 and formatting its disk as mbr. Clover will see it just fine so long as clover is installed on OSX's disk and that disk is set to boot first. W7 gains no benefit to being installed on gpt nor booting in efi mode. (besides greater complexity[headache]) Please visit a few pages ago, where we discussed this in greater detail.


EDIT: Ah, Tluck beat me to it. He's right that it is a simple process, however, since you do not have a specific need for w7 to boot in efi mode nor on a gpt formatted disk, then I believe it is indeed easier to proceed as mbr. (but only because it's on a separate disk)

Share this post


Link to post
Share on other sites

Thanks guys! I guess I skipped through a couple of the 56 pages.  :whistle:

 

I actually got to getting both OS in line and working each on their drive with each their EFI partition. (Microsoft's has NO NAME) So I'd rather not re-install Windows a 3rd time today (it was a long and hard fight, but I won in the end).

 

I have only one little cosmetic headache left. For some reason, Clover gives me 3 entries:

 

- OSX from MacOS drive 

- Microsoft Boot Menu to boot Win7 (it works :thumbsup_anim:  )

- Boot Windows from EFI -------------------------------->Which I would LOVE to find a way to erase, but it doesn't give me any details when I hit spacebar on that one. No UUID, just the options Boot Windows and Return. When I select that entry, the system goes to black screen and freezes, I need to hard reboot. I've renamed the EFI folder on my Windows drive, the Microsoft Boot manager disappeared from clover, but not that weird Boot Windows entry. 

 

Any idea? I would just love to make it disappear. 

 

Thanks

 

 

IMG_20140622_222342.jpg

 

IMG_20140622_222349.jpg

Edited by SimonLL

Share this post


Link to post
Share on other sites

@SimonLL, Clover's detecting a windows EFI bootloader somewhere, double check your /efi.

 

Did you end up converting the W7 to MBR or is it still GPT? It might have a hidden ESP.

 

You might also want to think about capturing a wim file just in case you need to reinstall quickly :-)

 

Thanks guys! I guess I skipped through a couple of the 56 pages.  :whistle:

 

I actually got to getting both OS in line and working each on their drive with each their EFI partition. (Microsoft's has NO NAME) So I'd rather not re-install Windows a 3rd time today (it was a long and hard fight, but I won in the end).

 

I have only one little cosmetic headache left. For some reason, Clover gives me 3 entries:

 

- OSX from MacOS drive 

- Microsoft Boot Menu to boot Win7 (it works :thumbsup_anim:  )

- Boot Windows from EFI -------------------------------->Which I would LOVE to find a way to erase, but it doesn't give me any details when I hit spacebar on that one. No UUID, just the options Boot Windows and Return. When I select that entry, the system goes to black screen and freezes, I need to hard reboot. I've renamed the EFI folder on my Windows drive, the Microsoft Boot manager disappeared from clover, but not that weird Boot Windows entry. 

 

Any idea? I would just love to make it disappear. 

 

Thanks

 

 

IMG_20140622_222342.jpg

 

IMG_20140622_222349.jpg

Share this post


Link to post
Share on other sites

My Windows disk is still GPT. I really don't want to go through reinstalling Windows. 

 

Could it be in the MSR partition? Windows did create a partition that I cannot access in Disk utility. 

 

If I want to tell Clover to hide the Microsoft reserved partition, how would I do that? I can't mount the partition in Disk Utility. Any other way to find it's UUID?

Share this post


Link to post
Share on other sites

It is not in the MSR, but you can remove the MSR safely. What does diskutil list show?

Share this post


Link to post
Share on other sites

Simons-MacBook-Pro:~ simon$ diskutil list
/dev/disk0
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *120.0 GB disk0
1: EFI EFI 209.7 MB disk0s1
2: Apple_HFS MacOS 119.2 GB disk0s2
3: Apple_Boot Recovery HD 650.0 MB disk0s3
/dev/disk1
#: TYPE NAME SIZE IDENTIFIER
0: GUID_partition_scheme *120.0 GB disk1
1: EFI NO NAME 104.9 MB disk1s1
2: Microsoft Reserved 134.2 MB disk1s2
3: Microsoft Basic Data WINDOWS 119.8 GB disk1s3
/dev/disk2
#: TYPE NAME SIZE IDENTIFIER
0: FDisk_partition_scheme *500.1 GB disk2
1: Apple_HFS OldOSX 500.1 GB disk2s1

Share this post


Link to post
Share on other sites

What!? Where's your Windows partition? There should be a Windows_NTFS partition in there somewhere!

Share this post


Link to post
Share on other sites

Haha! Well, it's probably NTFS, but I am using OSXFuse, so it might be labeling mine "correctly" whereas the default Mac NTFS driver just calls it "Microsoft Basic Data" -__-

 

Anyway, if you move the stuff that's in your EFI partition on the Windows HDD into the folder C:\EFI and either make sure that EFI partition is empty or just delete the partition, that should stop the double entries.

 

This works because Clover has NTFS drivers, but you will need the EFI partition there in case you ever need to boot w/o Clover.

Share this post


Link to post
Share on other sites

This is my directory structure, which boots Windows fine via UEFI.

 

/Volumes/windoze 1/EFI would equate to C:\EFI

 

It'd be /Volumes/NO\ NAME/EFI for you, but to change it while booted in mac you'll need OSXFuse.

jak@deimos ~ % tree /Volumes/windoze\ 1/EFI 
/Volumes/windoze 1/EFI
├── Boot
│   └── bootx64.efi
└── Microsoft
    └── Boot
        ├── BCD
        ├── blahblahblah other files

27 directories, 61 files

Share this post


Link to post
Share on other sites

Just to be sure:

 

On my computer, the NO NAME partition is the EFI of the W7 drive.

 

The C: would be the WINDOWS partition where windows is installed.

 

So I should move Both Folders from the EFI (NO NAME) partition to the root of the Partition where Windows is installed (C:\   WINDOWS).

 

I have Paragon NTFS, but I guess it doesn't work on the Terminal level... just GUI apps. Disk Utility is seeing NTFS.

Share this post


Link to post
Share on other sites

Yes, sorry for the confusion, what I have as "windoze 1" would be your "Windows" volume.

Just to be sure:

 

On my computer, the NO NAME partition is the EFI of the W7 drive.

 

The C: would be the WINDOWS partition where windows is installed.

 

So I should move Both Folders from the EFI (NO NAME) partition to the root of the Partition where Windows is installed (C:\   WINDOWS).

 

I have Paragon NTFS, but I guess it doesn't work on the Terminal level... just GUI apps. Disk Utility is seeing NTFS.

Share this post


Link to post
Share on other sites

Very strange. Clover installs it by default, but make sure that it has the NTFS-64.efi in /EFI/EFI/CLOVER/drivers64UEFI/ (on the Mac ssd)

Share this post


Link to post
Share on other sites

i have a simple setup to EFI boot OSX or Win7 from same disk. MS Basic Data is NTFS. one can hide any entry by specifying the UUID of the disk to hide. use the command line clover-genconfig and look at GUI section for Legacy Hidden etc. e.g. i could hide the EFI folder but just don't.  a 2 disk configuration will not be much different. 

 

$ diskutil list

/dev/disk0

   #:                       TYPE NAME                    SIZE       IDENTIFIER

   0:      GUID_partition_scheme                        *750.2 GB   disk0

   1:                        EFI EFI                     209.7 MB   disk0s1

   2:                  Apple_HFS OSX+                    697.7 GB   disk0s2

   3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3

   4:       Microsoft Basic Data C                       51.5 GB    disk0s4

clover looks like this for me:

post-954945-0-94367300-1403494093_thumb.png

 

4 items - each one has a file like boot*.efi and clover lists them all on the GUI unless you choose to hide some.

 

look in /Library/Logs/Clover/boot.log for "found ...

 

1:485  0:079  found PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,508E7C04-3837-4962-BF09-C18685712C8E,0x28,0x64000)\EFI\Microsoft\Boot\bootmgfw.efi

1:532  0:046  found PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,508E7C04-3837-4962-BF09-C18685712C8E,0x28,0x64000)\EFI\BOOT\BOOTX64.efi

1:569  0:002  found PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,C8207D8A-456D-4A9C-901C-80D386164B9B,0x64028,0x513A78B0)\System\Library\CoreServices\boot.efi

1:616  0:015  found PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,ED6F0FD8-0D05-4638-8975-5174B59E067C,0x5140B8D8,0x135F28)\com.apple.recovery.boot\boot.efi

 

 

MS boot menu - but my bcd has it boot straight to the C drive.

EFI (not ever really used as GUI choice)

OSX

Recovery HD

 

my EFI is equally simple: (posted more details a few pages back)

 

/EFI/BOOT (bootx64.efi is copy of cloverx64.efi)

/EFI/CLOVER/

/EFI/Microsoft/

Share this post


Link to post
Share on other sites

It's there.

After I installed Windows, I copied my CLOVER and BOOT folder from last night's backup in to my Mac EFI partition to be sure W7 didn't mess with my working OSX. So there is no chance that there would be a Windows efi file left in there. I really can't find where that Boot Windows from EFI thing comes from.

 

Also, diskutil will not give me a UUID for the MSR partition.

Share this post


Link to post
Share on other sites

Don't worry about the MSR, it's just {censored} space.

 

Okay, just tested, and for me;

 

C:\EFI\Boot\bootx64.efi is the "internal EFI" listing, the second one, that doesn't work for you.

 

C:\EFI\Microsoft\Boot\bootmgfw.efi is the "Windows boot menu from EFI"

 

You should only need one, since Clover is handling the EFI itself. I would move your EFI\Microsoft\Boot folder back onto your ESP, since that is where it was installed and you know it works there, but don't move the EFI\Boot, just delete it.

 

They both work for me, so I went ahead and tarballed my /Volumes/windoze/EFI/Boot folder and then deleted it, and I am left with just one working Windows entry (Windows Boot Menu from EFI).

 

My guess as to why your C:\EFI\Boot\bootx64.efi is not working is that it was created expecting to be on a different partition than it currently resides on. You can fix that by using bcdboot to recreate it, but if bootmgfw.efi is working fine with Clover, just get rid of it.

Share this post


Link to post
Share on other sites

So I looked at the log, and it looks like Clover is adding 2 Legacy boot options from the Windows Drive. One from partition #4 (Boot Windows from EFI) and one from Partition #6 (Boot Windows from WINDOWS).

 

Any Idea how to hide these options? Is there a way to tell Clover not to display Legacy options? I'm not sure I can hide them by GUID, because the #4 has the Windows Boot Manager.

0. Volume:
1:410  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)
1:411  0:000    Result of bootcode detection: bootable <null string> (<null string>)
1:411  0:000    Volume 'Whole Disc Boot', LegacyOS '', LegacyIcon(s) 'legacy', GUID = <null guid>
1:411  0:000   1. Volume:
1:411  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)
1:411  0:000    Volume 'Whole Disc Boot', LegacyOS '', LegacyIcon(s) 'legacy', GUID = <null guid>
1:411  0:000   2. Volume:
1:411  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)
1:411  0:000    Volume 'Whole Disc Boot', LegacyOS '', LegacyIcon(s) 'legacy', GUID = <null guid>
1:411  0:000   3. Volume:
1:411  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,MBR,0x050482B1,0x2,0x3A38602E)
1:412  0:000    Result of bootcode detection: bootable <null string> (<null string>)
1:412  0:000    Volume 'OldOSX', LegacyOS '', LegacyIcon(s) '<null string>', GUID = <null guid>
1:412  0:000   4. Volume:
1:412  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(1,GPT,B523591E-47F8-4618-9BCD-7CDBA9568C00,0x800,0x32000)
1:412  0:000    Result of bootcode detection: bootable Windows (vista,win)
1:412  0:000    Volume 'EFI', LegacyOS 'Windows', LegacyIcon(s) 'vista,win', GUID = B523591E-47F8-4618-9BCD-7CDBA9568C00
1:412  0:000   5. Volume:
1:412  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(2,GPT,EB5D106A-188C-4951-8B57-7528CBA94EEE,0x32800,0x40000)
1:412  0:000    Volume 'Legacy HD2', LegacyOS '', LegacyIcon(s) 'legacy', GUID = EB5D106A-188C-4951-8B57-7528CBA94EEE
1:412  0:000   6. Volume:
1:412  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(3,GPT,3E2AC32A-306E-4347-BD01-AAD357F50850,0x72800,0xDF22000)
1:413  0:000    Result of bootcode detection: bootable Windows (vista,win)
1:413  0:000    Volume 'WINDOWS', LegacyOS 'Windows', LegacyIcon(s) 'vista,win', GUID = 3E2AC32A-306E-4347-BD01-AAD357F50850
1:413  0:000   7. Volume:
1:413  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(1,GPT,30E964F6-A360-4B87-A134-3867F1691027,0x28,0x64000)
1:413  0:000    Result of bootcode detection: bootable <null string> (<null string>)
1:413  0:000    Volume 'EFI', LegacyOS '', LegacyIcon(s) '<null string>', GUID = 30E964F6-A360-4B87-A134-3867F1691027
1:413  0:000    This is SelfVolume !!
1:413  0:000   8. Volume:
1:413  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(2,GPT,8DAD5234-687F-4934-B2B0-0D115BA3A7F4,0x64028,0xDDFAC38)
1:413  0:000    Volume 'MacOS', LegacyOS '', LegacyIcon(s) '<null string>', GUID = 8DAD5234-687F-4934-B2B0-0D115BA3A7F4
1:413  0:000   9. Volume:
1:413  0:000    PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(3,GPT,A7859BC6-3CBE-4234-BC29-66834723F997,0xDE5EC60,0x135F28)
1:413  0:000    Volume 'Recovery HD', LegacyOS '', LegacyIcon(s) '<null string>', GUID = A7859BC6-3CBE-4234-BC29-66834723F997

…

0: 'Whole Disc Boot' no file system
1:500  0:000   1: 'Whole Disc Boot' no file system
1:500  0:000   2: 'Whole Disc Boot' no file system
1:500  0:000   3: 'OldOSX'
1:561  0:060  Check if volume Is Hibernated:
1:561  0:000  Check sleep image 'by signature':
1:615  0:053  read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
1:615  0:000  SleepImage name from pref: ImageVolume = 'OldOSX', ImageName = '\private\var\vm\sleepimage'
1:658  0:043  Reading first 512 bytes of sleepimage ...
1:669  0:010   OurBlockIoRead: Lba=3578D9A, Offset=6AF1B3400 (BlockSize=512)
1:669  0:000   sig lion: 0
1:669  0:000   sig snow: 0
1:669  0:000   no valid sleep image offset was found
1:669  0:000  Reading completed -> Success
1:669  0:000   sleepimage offset could not be acquired
1:669  0:000   hibernated: no - sign
1:695  0:026  found PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,MBR,0x050482B1,0x2,0x3A38602E)\System\Library\CoreServices\boot.efi
1:749  0:053   4: 'EFI'
1:759  0:010  found PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(1,GPT,B523591E-47F8-4618-9BCD-7CDBA9568C00,0x800,0x32000)\EFI\Microsoft\Boot\bootmgfw.efi
1:817  0:057  found PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)\HD(1,GPT,B523591E-47F8-4618-9BCD-7CDBA9568C00,0x800,0x32000)\EFI\BOOT\BOOTX64.efi
1:817  0:000   5: 'Legacy HD2' no file system
1:817  0:000   6: 'WINDOWS'
1:869  0:051   7: 'EFI'
1:920  0:050  skipped because path `PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(1,GPT,30E964F6-A360-4B87-A134-3867F1691027,0x28,0x64000)\EFI\BOOT\BOOTX64.efi` is self path!
1:920  0:000   8: 'MacOS'
1:932  0:012  Check if volume Is Hibernated:
1:932  0:000  Check sleep image 'by signature':
1:944  0:011  read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
1:944  0:000  SleepImage name from pref: ImageVolume = 'MacOS', ImageName = '\private\var\vm\sleepimage'
1:946  0:001  Reading first 512 bytes of sleepimage ...
1:948  0:002   OurBlockIoRead: Lba=1AA40A0, Offset=354814000 (BlockSize=512)
1:948  0:000   sig lion: 7A7A7A7A
1:948  0:000   sig snow: 0
1:948  0:000   no valid sleep image offset was found
1:948  0:000  Reading completed -> Success
1:948  0:000   sleepimage offset could not be acquired
1:948  0:000   hibernated: no - sign
1:954  0:006  found PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(2,GPT,8DAD5234-687F-4934-B2B0-0D115BA3A7F4,0x64028,0xDDFAC38)\System\Library\CoreServices\boot.efi
2:006  0:051   9: 'Recovery HD'
2:020  0:014  found PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(3,GPT,A7859BC6-3CBE-4234-BC29-66834723F997,0xDE5EC60,0x135F28)\com.apple.recovery.boot\boot.efi
2:070  0:049  Custom legacy start
2:070  0:000  Custom legacy end
2:070  0:000  Scanning legacy ...
2:070  0:000   0: 'Whole Disc Boot' (legacy) not legacy
2:070  0:000   1: 'Whole Disc Boot' (legacy) not legacy
2:070  0:000   2: 'Whole Disc Boot' (legacy) not legacy
2:070  0:000   3: 'OldOSX' (<null string>) not legacy
2:070  0:000   4: 'EFI' (vista,win) add legacy
2:074  0:004   added 'Boot Windows from EFI' OSType=2 Icon=vista,win
2:074  0:000   5: 'Legacy HD2' (legacy) not legacy
2:074  0:000   6: 'WINDOWS' (vista,win) add legacy
2:078  0:004   added 'Boot Windows from WINDOWS' OSType=2 Icon=vista,win
2:078  0:000   7: 'EFI' (<null string>) not legacy
2:078  0:000   8: 'MacOS' (<null string>) not legacy
2:078  0:000   9: 'Recovery HD' (<null string>) not legacy

GOT IT!!!! 

 

In Clover Configurator I just needed to put the scan to NOT Auto and uncheck Legacy. 

 

Thanks for your help guys!!!!

 

No I only really need to get Brightness going, but this thread is not very populated with nVidia users. I'm sure it's a simple thing, but really I'm not savvy enough to figure it out.

Share this post


Link to post
Share on other sites

Its has been a while now that I have successfully, converted my t420s to a hackintosh thanks to this thread. However, there is one slight problem and that is that under load, the idle temp of the cpu which hovers around 50 degrees goes to 90 (ie. youtube 1080p/ 4k full screen, or other cpu intensive task).

Normally, in windows this would be accommodated with a rapid rise in fan speed or I could enable turbo boost, and everything would run cool and fast.

Is there a way of enabling turbo boost or increasing the fan rpm in this set up. 

Any help is appreciated, thanks

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By rodrinico19
      Hola a todos, primero que nada estoy muy contento de a ver econtrado un foro de español sobre hackintosh.
      Mi problema consesite en que descargue unos drivers de esta pagina: https://github.com/chris1111/Wireless-USB-Adapter-Clover
      Seguí los pasos instale los kets en la carpeta EFI/CLOVER/OTHERS todo tal cual como dice ahi la instalación. luego segui los pasos de configurar la red dentro de configuracion del sistema etc.
      Lo cual el nombre me quedo en en0.
      El driver o kets funciona bien es reconocible por el S.O de hecho conecta la red, pero me dice que no tiene IP AUTO ASIGNADA Y LA OTRA QUE HAY UNA DESCONEXION A CADA RATO(como que desconectaras y conectaras el dispositvo usb a cada rato)
      Me gustaria que me ayuden con eso si es posible, Muchas Gracias!!
    • By Klaidonis
      I am making a minimal Clover build for the fastest boot possible with the boot6 file in legacy mode.
      While looking at the preboot.log, I noticed that there is a line without explanation (at 0:892). Apparently, whatever it is, the execution time of it is close to 2 seconds, more than 55% of the total logged boot time in the current configuration. This does not change whether I use USB 2 or USB 3 port.
       
      Is there a way to eliminate or speed up the above? Also, is there anything else you can suggest to improve the performance based on the below log file? Which moment in the boot process corresponds to the start time in preboot.log?  
      The last thing I would like to understand is the delay/timeout after the boot6 file has loaded, and the number 6 disappears from the screen. For about 2 seconds or slightly less, I can press any key, and then it will enter the BIOS-like interface from the boot6 file. Without further knowledge, it seems like those 2 seconds are just delay time, and only after that is CLOVERX64.efi actually started, which, I presume, is approximately when the preboot.log timer starts. So, if the aforementioned is correct, can I get rid of this delay as well? Note that I am using the boot1f32 file to chain-load boot6, which does not include the initial 2-second wait period for a keypress.
       
      === preboot.log ===
      0:100 0:100 MemLog inited, TSC freq: 2394459554 0:100 0:000 CPU was calibrated with ACPI PM Timer 0:100 0:000 LegacyRegion2: Chipset/proc: 0x0A048086 0:100 0:000 Next Generation Core processors (PAM 0x80-0x86) 0:100 0:000 Test PAM1=(0x41=90, 0x5a=90, 0x81=11, 0x91=00) at chipset 0A048086 0:100 0:000 , Install = Success 0:112 0:012 BiosVideoDriverBindingStart! 0:112 0:000 BiosVideoCheckForVbe 0:112 0:000 EdidOverride not found 0:121 0:009 Edid1+ 0:121 0:000 found Detail Timing 1920x1080 0:121 0:000 timing string after 0xFE:AUO 0:121 0:000 timing string after 0xFE:B156HAN01.2 0:122 0:000 0 1280x1024 attr=9B - ok, edid- 0:122 0:000 1 1024x768 attr=9B - ok, edid-, 1024x768, working, highest, pref=1 0:122 0:000 2 640x480 attr=9B - ok, edid-, 640x480, working 0:122 0:000 3 800x600 attr=9B - ok, edid-, 800x600, working 0:123 0:000 4 1920x1080 attr=9B - ok, edid+, working, highest, pref=4 0:123 0:000 BV new mode: 4 1920x1080 0:398 0:275 SetMode pref 4 (4) = Success 0:892 0:493 VGA Pci.Hdr.Command=6 - not enabled 2:623 1:731 2:623 0:000 Now is 21.02.2020, 13:03:21 (GMT) 2:623 0:000 Starting Clover revision: 5103 (master, commit 3f3b85da0) on CLOVER EFI 2:623 0:000 Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t GCC53 | -D NO_GRUB_DRIVERS_EMBEDDED --conf=/Users/sergey/src/CloverHackyColor/Conf -D USE_LOW_EBDA -a X64 -b RELEASE -t GCC53 -n 5 | OS: 10.14.6] 2:623 0:000 SelfDevicePath=PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) @940C9698 2:623 0:000 SelfDirPath = \EFI\CLOVER 2:623 0:000 SimpleTextEx Status=Success 2:623 0:000 === [ Get Smbios ] ======================================== 2:623 0:000 Type 16 Index = 0 2:623 0:000 Total Memory Slots Count = 2 2:623 0:000 Type 17 Index = 0 2:623 0:000 SmbiosTable.Type17->Speed = 1600MHz 2:623 0:000 SmbiosTable.Type17->Size = 4096MB 2:623 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 DIMM0 2:623 0:000 SmbiosTable.Type17->Vendor = Hynix 2:623 0:000 SmbiosTable.Type17->SerialNumber = 00000000 2:623 0:000 SmbiosTable.Type17->PartNumber = HMT451S6MFR6A-PB 2:623 0:000 Type 17 Index = 1 2:623 0:000 SmbiosTable.Type17->Speed = 1600MHz 2:623 0:000 SmbiosTable.Type17->Size = 8192MB 2:623 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 DIMM1 2:623 0:000 SmbiosTable.Type17->Vendor = Kingston 2:623 0:000 SmbiosTable.Type17->SerialNumber = 5A060A8A 2:623 0:000 SmbiosTable.Type17->PartNumber = KHX1600C9S3L/8G 2:623 0:000 Boot status=0 2:623 0:000 Running on: 'Aspire V5-573G' with board 'Dazzle_HW' 2:623 0:000 === [ GetCPUProperties ] ================================== 2:623 0:000 CPU Vendor = 756E6547 Model=40651 2:623 0:000 The CPU supported SSE4.1 2:623 0:000 BrandString = Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz 2:623 0:000 The CPU supported turbo 2:623 0:000 MSR 0x35 20004 2:623 0:000 MSR 0xE2 before patch 1E008405 2:623 0:000 MSR 0xE2 is locked, PM patches will be turned on 2:623 0:000 MSR 0xCE 0008083D_F3011800 2:623 0:000 corrected FLEX_RATIO = 0 2:623 0:000 MSR 0x1B0 00000000 2:623 0:000 FSBFrequency = 71 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz 2:623 0:000 MaxDiv/MinDiv: 24.0/8 2:623 0:000 Turbo: 27/27/27/30 2:623 0:000 Features: 0xBFEBFBFF 2:623 0:000 Threads: 4 2:623 0:000 Cores: 2 2:623 0:000 FSB: 100 MHz 2:623 0:000 CPU: 1700 MHz 2:623 0:000 TSC: 1700 MHz 2:623 0:000 PIS: 100 MHz 2:623 0:000 ExternalClock: 25 MHz 2:623 0:000 === [ GetDevices ] ======================================== 2:623 0:000 GOP found at: PcieRoot(0x0)/Pci(0x2,0x0)/AcpiAdr(0x80010100) 2:623 0:000 PCI (00|00:00.00) : 8086 0A04 class=060000 2:623 0:000 PCI (00|00:02.00) : 8086 0A16 class=030000 2:623 0:000 - GOP: Provided by device 2:623 0:000 - GFX: Model=Intel HD Graphics 4400 (Intel) 2:623 0:000 PCI (00|00:03.00) : 8086 0A0C class=040300 2:623 0:000 PCI (00|00:14.00) : 8086 9C31 class=0C0330 2:623 0:000 PCI (00|00:16.00) : 8086 9C3A class=078000 2:623 0:000 PCI (00|00:1B.00) : 8086 9C20 class=040300 2:623 0:000 PCI (00|00:1C.00) : 8086 9C10 class=060400 2:623 0:000 PCI (00|00:1C.02) : 8086 9C14 class=060400 2:623 0:000 PCI (00|04:00.00) : 168C 0034 class=028000 2:623 0:000 - WIFI: Vendor=Atheros 2:623 0:000 PCI (00|00:1C.03) : 8086 9C16 class=060400 2:623 0:000 PCI (00|05:00.00) : 10EC 5287 class=FF0000 2:623 0:000 PCI (00|05:00.01) : 10EC 8168 class=020000 2:623 0:000 - LAN: 0 Vendor=Realtek 2:623 0:000 PCI (00|00:1C.04) : 8086 9C18 class=060400 2:624 0:000 PCI (00|01:00.00) : 10DE 0FE4 class=030200 2:624 0:000 PCI (00|00:1D.00) : 8086 9C26 class=0C0320 2:624 0:000 PCI (00|00:1F.00) : 8086 9C43 class=060100 2:624 0:000 PCI (00|00:1F.02) : 8086 9C03 class=010601 2:624 0:000 PCI (00|00:1F.03) : 8086 9C22 class=0C0500 2:624 0:000 === [ GetDefaultSettings ] ================================ 2:624 0:000 Clover load options size = 0 bytes 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G--00-00-00-00-00-00. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G-1700. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Dazzle_HW. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Dazzle_HW-1700. Dir not exists 2:624 0:000 set OEMPath by default: EFI\CLOVER 2:637 0:012 EFI\CLOVER\config.plist loaded: Success 2:637 0:000 === [ GetListOfThemes ] =================================== 2:637 0:000 === [ Found config plists ] =============================== 2:637 0:000 - config.plist 2:637 0:000 === [ GetEarlyUserSettings ] ============================== 2:637 0:000 timeout set to 0 2:637 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 2:637 0:000 Default theme: embedded 2:637 0:000 === [ LoadDrivers ] ======================================= 2:637 0:000 === [ InitScreen ] ======================================== 2:637 0:000 Console modes reported: 4, available modes: 2:637 0:000 - [01]: 80x25 2:637 0:000 - [02]: 80x50 2:637 0:000 - [03]: 100x31 2:637 0:000 - [04]: 240x56 (current mode) 2:637 0:000 SetScreenResolution: 1920x1080 - already set 2:637 0:000 SetScreenResolution: 1920x1080 - already set 2:637 0:000 reinit: self device path=PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) 2:637 0:000 === [ GetMacAddress ] ===================================== 2:637 0:000 === [ ScanSPD ] =========================================== 2:637 0:000 Scanning SMBus [8086:9C22], mmio: 0xB3619004, ioport: 0x5040, hostc: 0x1 2:656 0:018 Slot: 2 Type 24 8192MB 1600MHz Vendor=Kingston PartNo=KHX1600C9S3L8G SerialNo=050A0006000A080A 2:657 0:000 === [ GetAcpiTablesList ] ================================= 2:657 0:000 Get Acpi Tables List from RSDT: 2:657 0:000 - [00]: FACP ACRPRDCT len=268 2:657 0:000 - [01]: UEFI ACRPRDCT len=566 2:657 0:000 - [02]: FPDT ACRPRDCT len=68 2:657 0:000 - [03]: ASF! ACRPRDCT len=165 2:657 0:000 - [04]: HPET ACRPRDCT len=56 2:657 0:000 - [05]: APIC ACRPRDCT len=140 2:657 0:000 - [06]: MCFG ACRPRDCT len=60 2:657 0:000 - [07]: BOOT ACRPRDCT len=40 2:657 0:000 - [08]: LPIT ACRPRDCT len=148 2:657 0:000 - [09]: ASPT ACRPRDCT len=52 2:657 0:000 - [10]: DBGP ACRPRDCT len=52 2:657 0:000 - [11]: SSDT ACRPRDCT len=1337 2:657 0:000 - [12]: SSDT ACRPRDCT len=2776 2:657 0:000 - [13]: SSDT ACRPRDCT len=12013 2:657 0:000 - [14]: SSDT ACRPRDCT len=11433 2:657 0:000 - [15]: SSDT ACRPRDCT len=2230 2:657 0:000 Calibrated TSC Frequency = 2394459554 = 2394MHz 2:657 0:000 === [ GetUserSettings ] =================================== 2:657 0:000 === [ Found DSDT tables ] ================================= 2:657 0:000 === [ ScanVolumes ] ======================================= 2:657 0:000 Found 8 volumes with blockIO 2:657 0:000 - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0) 2:659 0:001 Result of bootcode detection: bootable Linux (grub,linux) 2:659 0:000 - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0) 2:660 0:001 Result of bootcode detection: bootable unknown (legacy) 2:660 0:000 - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,8017BD66-1E24-4B31-8E09-BC49BECD6CC4,0x800,0x21330000) 2:661 0:001 Result of bootcode detection: bootable Windows (vista,win) 2:661 0:000 - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,82F3B738-65E9-458E-B2F1-BB55D4F00885,0x21331000,0x3D0800) 2:663 0:001 - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,E701DCD8-E3C5-4BFA-B61B-BFF4D80153FD,0x21701800,0x18C4F000) 2:664 0:001 - [05]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,4DB1239A-A9D7-4045-A162-7EF1B3A5913B,0x3A350C21,0x3A3B616E) 2:665 0:001 Result of bootcode detection: bootable Windows (vista,win) 2:665 0:000 - [06]: Volume: PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0) 2:677 0:011 Result of bootcode detection: bootable unknown (legacy) 2:677 0:000 USB volume 2:677 0:000 USB volume 2:677 0:000 - [07]: Volume: PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) 2:688 0:011 Result of bootcode detection: bootable unknown (legacy) 2:688 0:000 USB volume 2:688 0:000 USB volume 2:688 0:000 This is SelfVolume !! 2:688 0:000 PutNvramPlistToRtVars: nvram.plist not found 2:689 0:000 No AudioIoProtocols, status=Not Found 2:689 0:000 === [ InitTheme ] ========================================= 2:689 0:000 use daylight theme 2:689 0:000 using embedded theme 2:689 0:000 got embedded sound 2:689 0:000 Channels: 2 Sample rate: 8000 Hz Bits: 16 2:689 0:000 output to channel 0 with volume 70, len=25600 2:689 0:000 sound channels=2 bits=16 freq=8000 2:689 0:000 sound converted to 48kHz 2:689 0:000 not found AudioIo to play 2:689 0:000 sound play end with status=Not Found 2:690 0:001 Using embedded font: Success 2:691 0:000 theme inited 2:691 0:000 Chosen embedded theme 2:691 0:000 after NVRAM boot-args= 2:691 0:000 === [ Dump SMC keys from NVRAM ] ========================== 2:691 0:000 no AppleSMC protocol 2:691 0:000 Entry scan disabled 2:691 0:000 === [ AddCustomTool ] ===================================== 2:692 0:000 === [ GetEfiBootDeviceFromNvram ] ========================= 2:692 0:000 Default boot entry not found 2:692 0:000 DefaultIndex=-1 and MainMenu.EntryCount=4 2:973 0:281 GUI ready  
    • By tluck
      Lenovo T460 macOS with Clover Guide
      Latest Release on GitHub (February 2020) Updated to Clover r5104 Updated Lilu based kexts - Lilu, ALC, WEG Updated acidanthera VoodooPS2 kext v2.1.1 the older 1.9 to the Misc Folder as an option.
        Various Tweaks over Last months The zip file is a complete Clover ESP (/EFI) bundle and kext pack for the Lenovo T460. The current file bundle is tested on Sierra. 
      Note: I never got the GFX fully working on El Capitan. 
      Full Clover file set - config.plist etc. Includes all custom kexts Includes custom DSDT/SSDT scripts and patches Utility scripts The zip bundles are posted to GitHub: https://github.com/tluck/Lenovo-T460-Clover/releases
      Caveat: The T460 systems used here was configured with: i5-6300U, Intel HD Graphics 520, 1920x1080 touch screen. If you have a different system model, then extract the ACPI files and use the included scripts to create a set of files consistent with your system type and BIOS version. See below for details.
      Credits: RehabMan, Shmilee, vusun123, TimeWalker, Mieze from which, much of their work and help is/was was used to get the T460 to this point.
      Devices and aspects working:
      Ethernet -  Intel I219LM is enabled via IntelMausiEthernext.kext WiFi/BT - substitute the Intel WiFi/BT with a compatible Broadcom or Atheros chip Audio - ALC293 codec implemented via AppleALC.kext (the old AppleHDA_ALC293 and CodecCommander kexts are not needed) PS2 - ClickPad + TrackPoint + all 3 buttons - using a modified VoodooPS2Controller to support new layouts - and added some custom Fn key maps based on 440/450 dsdt USB - implemented via custom SSDT + USBInjectAll kext. All USB3/USB2 ports are intel-based and work -  3 external USB and internal Camera, BT, etc  Sleep/Wake - the sleepwatcher package and custom sleep/wake scripts are used to help with sleep/wake for BT and PS2 devices. Note: have not tried to implement the SD card reader - no driver found.
      ACPI Files
      New Installation - Steps and Details
      Part 1 - OS Installation
      Part 2- Post OS Installation and Setup
      Notes on Custom Kexts
       
    • By Jancey
      I used this command: diskutil info disk0s2 | grep -i "Partition UUID" | rev | cut -d' ' -f 1 | rev

      But I accidentally removed the wrong disk and now my main windows drive is not appearing in the bootloader. I can't figure out how to get it back. I tried resetting my windows drive, but I kept getting an error. I also reset my mac and reinstalled Catalina.
    • By gengstapo
      @Hervé
       
      Im having similar issue with my HS setup, dell latitute 3480, i5-7200U
      Once the hdmi plugged in, the laptop display went blank, only could see the external tv
      But, when i put my laptop to sleep & wake up again, both screen got display (hdmi still connected)
      Even the hdmi could be plugged off & in (after sleep), the laptop display is fine
       
      What could be the culprit?
      Dell’s MacBook Pro IORegistry.zip
      config.plist.zip
×