Jump to content
K0gen

Lenovo ThinkPad T420 with UEFI Only

4,870 posts in this topic

Recommended Posts

@FungFlex - what is your T420 model? do you have high-res or low-res monitor? if you have low-res don't use DualLink=1. which dsdt are using. one has Dual Link on and one doesn't.

Share this post


Link to post
Share on other sites
Advertisement

@tluck-

I'm creating the USB for the final Mavericks release using your latest guide on post #486, but the USB doesn't seem to be bootable...

Am I missing something?

 

Thanks,

aj

Share this post


Link to post
Share on other sites

{censored}. sorry all. I completely forgot to mention (and update the zip file) that I replaced VboxHFS-64.efi with HFSPlus.efi from here:

 

https://github.com/STLVNUB/CloverGrower/blob/master/Files/HFSPlus/x64/HFSPlus.efi

 

View Raw

 

as someone pointed out it seems to be able to read the install bundles better. and it does!

Share this post


Link to post
Share on other sites

Hi, the link for the bios does not work, it's maxed out. Can you attach it here?

Thanks,

AJ

 

the link appears to be broken again. could someone post a new one? thanks.

 

edit: nevermind, I found it had been reposted on the original forum in a different reply: http://forums.mydigitallife.info/archive/index.php/t-5866-p-120.html

Edited by Manwe150

Share this post


Link to post
Share on other sites

i can't get any osx to work with my t420 (type 4180-b95 has nvs 4200m) and I'm not sure where to start.

 

ive tired lion, mountain lion and mavericks. i preferably want mavericks but will start where i need to, i even tried pulling the HD out of a macbook and booting that

 

currently when i try to boot the usb installer for any version of the os i made (which worked on a real mac at least 10.7 and 10.9 did) it does what it did in this video

My t420 Video also if i back out of that black screen wight eh small dash if it lets me it goes back to clover but it is frozen most of the time

when i try to boot the lion from a real mac i get this version of Mac OS X is not supported on this platform

reason: 4180b95

but when i boot the recovery partition it goes to  a white screen with a beach ball after verbose mode but if i try with the -x flag it doesn't even try to boot it goes to saying i can't find the mach_kernel
id obviously prefer a fresh install by this or another guide but i seem to not have any luck with it


idea's?

thanks

Share this post


Link to post
Share on other sites

@anarchy99

 

i would turn off NVS for now.

 

Note: a vanilla mac installer needs FakeSMC - same for the HD from a real mac. these will not boot up unless you inject FakeSMC (and  VoodooPS2controller unless you have USB keyboard/mouse).

 

are you using the clover config from my zip for your EFI? what EFI drivers do you have installed. it acts like its not even reading the USB? canyou may need HFSplus.efi to boot from recoveryHD. 

Share this post


Link to post
Share on other sites

Using your clover config I was able to boot and install Mavericks YAY!!

I did have to disable the discete graphics :-(

So far audio seems to work, it sees ethernet but doesn't text any cabel and no wifi

 

I installed a Dell 1390 wireless card that I stripped out of an old hackintosh into the bottom mini PCI-E slots and it doesn't seem to detect at all

does anyone know how to get that working?

I read somewhere that someone said it was for msata and USB only, but the t420 hardware maintenance manual refers to it as 1070 PCI Express mini card for wireless WAN

If I could add rather use that  bottom slot then have to buy a mini PCI half card or whatever it's called for under the keyboard

@anarchy99

 

i would turn off NVS for now.

 

Note: a vanilla mac installer needs FakeSMC - same for the HD from a real mac. these will not boot up unless you inject FakeSMC (and  VoodooPS2controller unless you have USB keyboard/mouse).

 

are you using the clover config from my zip for your EFI? what EFI drivers do you have installed. it acts like its not even reading the USB? canyou may need HFSplus.efi to boot from recoveryHD. 

Share this post


Link to post
Share on other sites

@anarch99 - you will get ethernet if you installed the AppleIntelE1000e kext ... but wifi AFAIK is only works with modded bios and then you replace the intel wifi with the mini express card. the  bottom slots will not work for wifi. for wifi, i use a USB wifi.

Share this post


Link to post
Share on other sites

Ok all, well after some tricky issues I am back on Mavericks and able to boot but in only one of two scenarios:

 

1) Boot directly to Mac partition on UEFI Clover boot loader and deal with quadrant display issue

 

2) Boot off old formatted drive with Clover r1625 which fixes display and breaks sound

 

I am having a hell of a hard time customizing things. After I have installed Clover and I restart the computer should I still see the ESP partition? This consistently disappears the moment I restart my computer.  Additionally if I try to select the EFI partition on the Clover boot screen it just flashes.

 

Back on Mountain Lion my startup would be selecting EFI than my Mac drive and it worked great but no luck.

 

Finally, I’ve seen totally mixed answers on where I should find my product ID.  Using various methods it seems like my DisplayProductID is 738 but I’m not even sure that is the right number I should be renaming the OEM folder too? I've included below stuff I pull from when I did the ioreg -l:

"IODisplayEDID" = <00ffffffffffff0030e4e2020000000000140103801f11780a43459759578e28215054000000010101010101010101010101010101018025408060841a303020350036ae10000019000000000000000000000000000000000000000000fe004c4720446973706c61790a2020000000fe004c503134305744322d544c42310038

"DisplayProductID" = 738
"DisplayVendorID" = 12516
"IODisplayPrefsKey" = "IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/IGPU@2/AppleIntelFramebuffer@0/display0/AppleBacklightDisplay-30e4-2e2"

To answer TLuck’s question, yes low res model with i5 2.49ghz

Share this post


Link to post
Share on other sites

@FungFlex - 

 

what DSDT are you using? if you are booting using the EFI i posted - there are 2 configs and matching DSDTs. since you are low-res, you should be using the Low-Res 4236Y33 version.  

 

the EDID shown above is consistent with the the High-Res version 1600x900 LCD

 

the EFI partition (ESP) is automatically mounted by a clover utility. this is convenience for you.

Share this post


Link to post
Share on other sites

@FungFlex - 

 

what DSDT are you using? if you are booting using the EFI i posted - there are 2 configs and matching DSDTs. since you are low-res, you should be using the Low-Res 4236Y33 version.  

 

the EDID shown above is consistent with the the High-Res version 1600x900 LCD

 

the EFI partition (ESP) is automatically mounted by a clover utility. this is convenience for you.

I am using the 33 version as I believe I have the low-res version. The EDID I ran was done while I was stuck in quadrant mode if that maybe explains why it would show the 1600x900 one. Not sure how to confirm to be honest, this computer barely ever ran windows :-)

 

I guess my confusion is, when I install Clover the parition named "EFI" appears (although only one time was it named "ESP") when that happens I drag your zip file contents into the Clover/Boot folders and when I restart the computer that "EFI" partition is gone. Is this normal?

Also, on the clover boot menu, if everything is installed correctly what do you select when booting up?

 

Finally, the folder I am supposed to rename is "4236Y33" correct? The question is, how do I know what to rename it properly? Where do I find the appropriate string?

Share this post


Link to post
Share on other sites

@FungFlex - 

 

use the console app to look at the clover boot.log - it will show you the productID.  or use the Clover Options Menu to get the Product ID - forget where exactly. thats the name of your OEM folder. should match whats on your label on the bottom of system.

 

there is a dsdt.aml in /EFI/Clover/ACPI/patched - this is for high-res - same as the one in OEM/4236AT9/ACPI/patched. thats why you are getting 4 panels. this dsdt has duallink=1 and injects a 1600x900 EDID. replace it with the low-res one. 

 

when you rename OEM/4326Y33 to match your ID, it will use the stuff in this folder vs the top level. 

 

the Installer mounts the ESP on /Volumes/ESP. there is an option to have clover utility mount the ESP upon boot up. it mount it at /Volumes/EFI (these are installed optionally by the Clover .pkg installer. 

 

when you boot, select your OSX partition. 

Share this post


Link to post
Share on other sites

So happy I could kiss you! Although I'm probably not your type ;-)

 

Everything is working perfectly, I'm running Mavericks and everything is fully functional (sound and display! hooray!)  Only outstanding question is previously on 10.8 I booted with Kogen's custom clover build and it must have injected a different trackpad kext as I was previously able to do some 3 fingered gestures for mission control and switching between spaces. These seem to be broken, is that a 10.9 thing or should I pull a kext from his bundle?

 

Having some minor issues with iMessage but I haven't done anywhere near enough troubleshooting on my end to diagnose yet.

Share this post


Link to post
Share on other sites

Following the instructions for 10.9 install from post #486:

 

 

 

  • for 10.9 install USB
    1. Download from App Store (puts in /Applications
    2. Partition 8GB USB as GUID (use option menu to) - title the partition USB
    3. run this command:
      sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ OS\ X\ Mavericks.app —nointeraction
       
    4. manually mount ESP of USB and copy the clover EFI folder onto USB ESP (assuming the USB is disk2)
      mkdir /Volumes/ESP-USB
      mount -t msdos /dev/disk2s1 /Volumes/ESP-USB
       
    5. rename OEM OEM.NU for USB installer so it will use top level config.plist that will inject kexts
    6. Boot and install OSX!

 

When I boot into the installer I get the 4 quadrant screen deal. Searching around this same topic I saw to go into config.plist (in this case top-level) and set Dual Link to 0 which I have done but still get the split screens. I've tried booting into safe mode but it only causes an error and reboots before it even gets to the installer GUI. What else can I adjust? I'll try installing anyway since the fix will need to happen when I am done with the vanilla install as well.

 

Thanks,

 

Anthony

 

machine type - 4179W1F

Share this post


Link to post
Share on other sites

Following the instructions for 10.9 install from post #486:

 

 

When I boot into the installer I get the 4 quadrant screen deal. Searching around this same topic I saw to go into config.plist (in this case top-level) and set Dual Link to 0 which I have done but still get the split screens. I've tried booting into safe mode but it only causes an error and reboots before it even gets to the installer GUI. What else can I adjust? I'll try installing anyway since the fix will need to happen when I am done with the vanilla install as well.

 

Thanks,

 

Anthony

 

machine type - 4179W1F

 

For me the full install happened in "quadrant" mode. It wasn't until install was fully done and I installed clover and fixed the OEM folder that quadrant display was fixed. 

Share this post


Link to post
Share on other sites

I guess i need to augment the instructions for better handling of low-res LCD configurations. for non 1600x900 LCD, to fix this quadrant thing on your USB installer and HD (until you rename the OEM folder to say 4179W1F for example), copy the generic (low-res) dsdt.aml into use on the top level. When there is folder in OEM that matches your product ID, clover will that instead. the

 

cd to your mounted ESP location 

cp EFI/CLOVER/OEM/4236Y33/ACPI/patched/dsdt.aml EFI/CLOVER/ACPI/patched/dsdt.aml

Share this post


Link to post
Share on other sites

i get stuck

 

stuck on IOBluetoothHCIController Missing Bluetooth Controller Transport

 

upgrade on 10.9

Did you try either disabling Bluetooth in the BIOS, or in my case I use a USB bluetooth adapter as my model didn't have it built in, I simply removed it during install.

Share this post


Link to post
Share on other sites

I guess i need to augment the instructions for better handling of low-res LCD configurations. for non 1600x900 LCD, to fix this quadrant thing on your USB installer and HD (until you rename the OEM folder to say 4179W1F for example), copy the generic (low-res) dsdt.aml into use on the top level. When there is folder in OEM that matches your product ID, clover will that instead. the

 

cd to your mounted ESP location 

cp EFI/CLOVER/OEM/4236Y33/ACPI/patched/dsdt.aml EFI/CLOVER/ACPI/patched/dsdt.aml

 

Thanks! Got myself booted up with sound and network and best of all no quadrants. Haven't tried much else yet.

Share this post


Link to post
Share on other sites

Did you try either disabling Bluetooth in the BIOS, or in my case I use a USB bluetooth adapter as my model didn't have it built in, I simply removed it during install.

Yes...im already disabling bluetooth in BIOS.

Share this post


Link to post
Share on other sites

Updated...
Finally work with 10.9.. :) thanks tulk..for your tutorial.
 
@Tulk, how to read OEM/4xxxx folder in ESP in 10.9 ? cause if im rename OEM.NU to OEM, the configuration clover will read in directory OEM/config.plist and make not boot properly ( stuck on IOBluetooth )

iMessage, iCloud etc using apple ID, not work... :( how to solve this problem ?

 

Updated this morning Oct 31st

 

iMessage, iCloud etch using apple ID work !!!

To do this:

 

1 Remove all Network interfaces

2 Remove /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist

3 Reboot

4 Readd your Network Interface.

Share this post


Link to post
Share on other sites

the point of the OEM folder is to have a configuration for the HD versus USB. i use the top-level for USB installer - set to Inject Kexts. I make the assumption you will put the custom kexts in /S/L/E and not need to inject them. So If you have a high-res LCD rename 4236AT9 to match your ProductID.

 

if you have low-res LCD, then rename 4236Y33 to match your ProductID.

Share this post


Link to post
Share on other sites

Thanks to Kogen Mantis, Tluck et al. I now have a fully functional 10.8.5 install. No bluetooth but replaced the wifi card. I have never been happier. Thanks

Share this post


Link to post
Share on other sites

bluetooth should be fixable by either replacing or editing:

 

BroadcomBluetoothHostControllerUSBTransport.kext (v4.1.7 with patched Info.plist from 10.8.5) - adds ProductID 8575 to make BT work! Put/replace one in /S/L/E/IOBluetoothFamily.kext/Contents/PlugIns

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By rodrinico19
      Hola a todos, primero que nada estoy muy contento de a ver econtrado un foro de español sobre hackintosh.
      Mi problema consesite en que descargue unos drivers de esta pagina: https://github.com/chris1111/Wireless-USB-Adapter-Clover
      Seguí los pasos instale los kets en la carpeta EFI/CLOVER/OTHERS todo tal cual como dice ahi la instalación. luego segui los pasos de configurar la red dentro de configuracion del sistema etc.
      Lo cual el nombre me quedo en en0.
      El driver o kets funciona bien es reconocible por el S.O de hecho conecta la red, pero me dice que no tiene IP AUTO ASIGNADA Y LA OTRA QUE HAY UNA DESCONEXION A CADA RATO(como que desconectaras y conectaras el dispositvo usb a cada rato)
      Me gustaria que me ayuden con eso si es posible, Muchas Gracias!!
    • By Klaidonis
      I am making a minimal Clover build for the fastest boot possible with the boot6 file in legacy mode.
      While looking at the preboot.log, I noticed that there is a line without explanation (at 0:892). Apparently, whatever it is, the execution time of it is close to 2 seconds, more than 55% of the total logged boot time in the current configuration. This does not change whether I use USB 2 or USB 3 port.
       
      Is there a way to eliminate or speed up the above? Also, is there anything else you can suggest to improve the performance based on the below log file? Which moment in the boot process corresponds to the start time in preboot.log?  
      The last thing I would like to understand is the delay/timeout after the boot6 file has loaded, and the number 6 disappears from the screen. For about 2 seconds or slightly less, I can press any key, and then it will enter the BIOS-like interface from the boot6 file. Without further knowledge, it seems like those 2 seconds are just delay time, and only after that is CLOVERX64.efi actually started, which, I presume, is approximately when the preboot.log timer starts. So, if the aforementioned is correct, can I get rid of this delay as well? Note that I am using the boot1f32 file to chain-load boot6, which does not include the initial 2-second wait period for a keypress.
       
      === preboot.log ===
      0:100 0:100 MemLog inited, TSC freq: 2394459554 0:100 0:000 CPU was calibrated with ACPI PM Timer 0:100 0:000 LegacyRegion2: Chipset/proc: 0x0A048086 0:100 0:000 Next Generation Core processors (PAM 0x80-0x86) 0:100 0:000 Test PAM1=(0x41=90, 0x5a=90, 0x81=11, 0x91=00) at chipset 0A048086 0:100 0:000 , Install = Success 0:112 0:012 BiosVideoDriverBindingStart! 0:112 0:000 BiosVideoCheckForVbe 0:112 0:000 EdidOverride not found 0:121 0:009 Edid1+ 0:121 0:000 found Detail Timing 1920x1080 0:121 0:000 timing string after 0xFE:AUO 0:121 0:000 timing string after 0xFE:B156HAN01.2 0:122 0:000 0 1280x1024 attr=9B - ok, edid- 0:122 0:000 1 1024x768 attr=9B - ok, edid-, 1024x768, working, highest, pref=1 0:122 0:000 2 640x480 attr=9B - ok, edid-, 640x480, working 0:122 0:000 3 800x600 attr=9B - ok, edid-, 800x600, working 0:123 0:000 4 1920x1080 attr=9B - ok, edid+, working, highest, pref=4 0:123 0:000 BV new mode: 4 1920x1080 0:398 0:275 SetMode pref 4 (4) = Success 0:892 0:493 VGA Pci.Hdr.Command=6 - not enabled 2:623 1:731 2:623 0:000 Now is 21.02.2020, 13:03:21 (GMT) 2:623 0:000 Starting Clover revision: 5103 (master, commit 3f3b85da0) on CLOVER EFI 2:623 0:000 Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t GCC53 | -D NO_GRUB_DRIVERS_EMBEDDED --conf=/Users/sergey/src/CloverHackyColor/Conf -D USE_LOW_EBDA -a X64 -b RELEASE -t GCC53 -n 5 | OS: 10.14.6] 2:623 0:000 SelfDevicePath=PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) @940C9698 2:623 0:000 SelfDirPath = \EFI\CLOVER 2:623 0:000 SimpleTextEx Status=Success 2:623 0:000 === [ Get Smbios ] ======================================== 2:623 0:000 Type 16 Index = 0 2:623 0:000 Total Memory Slots Count = 2 2:623 0:000 Type 17 Index = 0 2:623 0:000 SmbiosTable.Type17->Speed = 1600MHz 2:623 0:000 SmbiosTable.Type17->Size = 4096MB 2:623 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 DIMM0 2:623 0:000 SmbiosTable.Type17->Vendor = Hynix 2:623 0:000 SmbiosTable.Type17->SerialNumber = 00000000 2:623 0:000 SmbiosTable.Type17->PartNumber = HMT451S6MFR6A-PB 2:623 0:000 Type 17 Index = 1 2:623 0:000 SmbiosTable.Type17->Speed = 1600MHz 2:623 0:000 SmbiosTable.Type17->Size = 8192MB 2:623 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 DIMM1 2:623 0:000 SmbiosTable.Type17->Vendor = Kingston 2:623 0:000 SmbiosTable.Type17->SerialNumber = 5A060A8A 2:623 0:000 SmbiosTable.Type17->PartNumber = KHX1600C9S3L/8G 2:623 0:000 Boot status=0 2:623 0:000 Running on: 'Aspire V5-573G' with board 'Dazzle_HW' 2:623 0:000 === [ GetCPUProperties ] ================================== 2:623 0:000 CPU Vendor = 756E6547 Model=40651 2:623 0:000 The CPU supported SSE4.1 2:623 0:000 BrandString = Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz 2:623 0:000 The CPU supported turbo 2:623 0:000 MSR 0x35 20004 2:623 0:000 MSR 0xE2 before patch 1E008405 2:623 0:000 MSR 0xE2 is locked, PM patches will be turned on 2:623 0:000 MSR 0xCE 0008083D_F3011800 2:623 0:000 corrected FLEX_RATIO = 0 2:623 0:000 MSR 0x1B0 00000000 2:623 0:000 FSBFrequency = 71 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz 2:623 0:000 MaxDiv/MinDiv: 24.0/8 2:623 0:000 Turbo: 27/27/27/30 2:623 0:000 Features: 0xBFEBFBFF 2:623 0:000 Threads: 4 2:623 0:000 Cores: 2 2:623 0:000 FSB: 100 MHz 2:623 0:000 CPU: 1700 MHz 2:623 0:000 TSC: 1700 MHz 2:623 0:000 PIS: 100 MHz 2:623 0:000 ExternalClock: 25 MHz 2:623 0:000 === [ GetDevices ] ======================================== 2:623 0:000 GOP found at: PcieRoot(0x0)/Pci(0x2,0x0)/AcpiAdr(0x80010100) 2:623 0:000 PCI (00|00:00.00) : 8086 0A04 class=060000 2:623 0:000 PCI (00|00:02.00) : 8086 0A16 class=030000 2:623 0:000 - GOP: Provided by device 2:623 0:000 - GFX: Model=Intel HD Graphics 4400 (Intel) 2:623 0:000 PCI (00|00:03.00) : 8086 0A0C class=040300 2:623 0:000 PCI (00|00:14.00) : 8086 9C31 class=0C0330 2:623 0:000 PCI (00|00:16.00) : 8086 9C3A class=078000 2:623 0:000 PCI (00|00:1B.00) : 8086 9C20 class=040300 2:623 0:000 PCI (00|00:1C.00) : 8086 9C10 class=060400 2:623 0:000 PCI (00|00:1C.02) : 8086 9C14 class=060400 2:623 0:000 PCI (00|04:00.00) : 168C 0034 class=028000 2:623 0:000 - WIFI: Vendor=Atheros 2:623 0:000 PCI (00|00:1C.03) : 8086 9C16 class=060400 2:623 0:000 PCI (00|05:00.00) : 10EC 5287 class=FF0000 2:623 0:000 PCI (00|05:00.01) : 10EC 8168 class=020000 2:623 0:000 - LAN: 0 Vendor=Realtek 2:623 0:000 PCI (00|00:1C.04) : 8086 9C18 class=060400 2:624 0:000 PCI (00|01:00.00) : 10DE 0FE4 class=030200 2:624 0:000 PCI (00|00:1D.00) : 8086 9C26 class=0C0320 2:624 0:000 PCI (00|00:1F.00) : 8086 9C43 class=060100 2:624 0:000 PCI (00|00:1F.02) : 8086 9C03 class=010601 2:624 0:000 PCI (00|00:1F.03) : 8086 9C22 class=0C0500 2:624 0:000 === [ GetDefaultSettings ] ================================ 2:624 0:000 Clover load options size = 0 bytes 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G--00-00-00-00-00-00. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G-1700. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Dazzle_HW. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Dazzle_HW-1700. Dir not exists 2:624 0:000 set OEMPath by default: EFI\CLOVER 2:637 0:012 EFI\CLOVER\config.plist loaded: Success 2:637 0:000 === [ GetListOfThemes ] =================================== 2:637 0:000 === [ Found config plists ] =============================== 2:637 0:000 - config.plist 2:637 0:000 === [ GetEarlyUserSettings ] ============================== 2:637 0:000 timeout set to 0 2:637 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 2:637 0:000 Default theme: embedded 2:637 0:000 === [ LoadDrivers ] ======================================= 2:637 0:000 === [ InitScreen ] ======================================== 2:637 0:000 Console modes reported: 4, available modes: 2:637 0:000 - [01]: 80x25 2:637 0:000 - [02]: 80x50 2:637 0:000 - [03]: 100x31 2:637 0:000 - [04]: 240x56 (current mode) 2:637 0:000 SetScreenResolution: 1920x1080 - already set 2:637 0:000 SetScreenResolution: 1920x1080 - already set 2:637 0:000 reinit: self device path=PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) 2:637 0:000 === [ GetMacAddress ] ===================================== 2:637 0:000 === [ ScanSPD ] =========================================== 2:637 0:000 Scanning SMBus [8086:9C22], mmio: 0xB3619004, ioport: 0x5040, hostc: 0x1 2:656 0:018 Slot: 2 Type 24 8192MB 1600MHz Vendor=Kingston PartNo=KHX1600C9S3L8G SerialNo=050A0006000A080A 2:657 0:000 === [ GetAcpiTablesList ] ================================= 2:657 0:000 Get Acpi Tables List from RSDT: 2:657 0:000 - [00]: FACP ACRPRDCT len=268 2:657 0:000 - [01]: UEFI ACRPRDCT len=566 2:657 0:000 - [02]: FPDT ACRPRDCT len=68 2:657 0:000 - [03]: ASF! ACRPRDCT len=165 2:657 0:000 - [04]: HPET ACRPRDCT len=56 2:657 0:000 - [05]: APIC ACRPRDCT len=140 2:657 0:000 - [06]: MCFG ACRPRDCT len=60 2:657 0:000 - [07]: BOOT ACRPRDCT len=40 2:657 0:000 - [08]: LPIT ACRPRDCT len=148 2:657 0:000 - [09]: ASPT ACRPRDCT len=52 2:657 0:000 - [10]: DBGP ACRPRDCT len=52 2:657 0:000 - [11]: SSDT ACRPRDCT len=1337 2:657 0:000 - [12]: SSDT ACRPRDCT len=2776 2:657 0:000 - [13]: SSDT ACRPRDCT len=12013 2:657 0:000 - [14]: SSDT ACRPRDCT len=11433 2:657 0:000 - [15]: SSDT ACRPRDCT len=2230 2:657 0:000 Calibrated TSC Frequency = 2394459554 = 2394MHz 2:657 0:000 === [ GetUserSettings ] =================================== 2:657 0:000 === [ Found DSDT tables ] ================================= 2:657 0:000 === [ ScanVolumes ] ======================================= 2:657 0:000 Found 8 volumes with blockIO 2:657 0:000 - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0) 2:659 0:001 Result of bootcode detection: bootable Linux (grub,linux) 2:659 0:000 - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0) 2:660 0:001 Result of bootcode detection: bootable unknown (legacy) 2:660 0:000 - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,8017BD66-1E24-4B31-8E09-BC49BECD6CC4,0x800,0x21330000) 2:661 0:001 Result of bootcode detection: bootable Windows (vista,win) 2:661 0:000 - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,82F3B738-65E9-458E-B2F1-BB55D4F00885,0x21331000,0x3D0800) 2:663 0:001 - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,E701DCD8-E3C5-4BFA-B61B-BFF4D80153FD,0x21701800,0x18C4F000) 2:664 0:001 - [05]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,4DB1239A-A9D7-4045-A162-7EF1B3A5913B,0x3A350C21,0x3A3B616E) 2:665 0:001 Result of bootcode detection: bootable Windows (vista,win) 2:665 0:000 - [06]: Volume: PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0) 2:677 0:011 Result of bootcode detection: bootable unknown (legacy) 2:677 0:000 USB volume 2:677 0:000 USB volume 2:677 0:000 - [07]: Volume: PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) 2:688 0:011 Result of bootcode detection: bootable unknown (legacy) 2:688 0:000 USB volume 2:688 0:000 USB volume 2:688 0:000 This is SelfVolume !! 2:688 0:000 PutNvramPlistToRtVars: nvram.plist not found 2:689 0:000 No AudioIoProtocols, status=Not Found 2:689 0:000 === [ InitTheme ] ========================================= 2:689 0:000 use daylight theme 2:689 0:000 using embedded theme 2:689 0:000 got embedded sound 2:689 0:000 Channels: 2 Sample rate: 8000 Hz Bits: 16 2:689 0:000 output to channel 0 with volume 70, len=25600 2:689 0:000 sound channels=2 bits=16 freq=8000 2:689 0:000 sound converted to 48kHz 2:689 0:000 not found AudioIo to play 2:689 0:000 sound play end with status=Not Found 2:690 0:001 Using embedded font: Success 2:691 0:000 theme inited 2:691 0:000 Chosen embedded theme 2:691 0:000 after NVRAM boot-args= 2:691 0:000 === [ Dump SMC keys from NVRAM ] ========================== 2:691 0:000 no AppleSMC protocol 2:691 0:000 Entry scan disabled 2:691 0:000 === [ AddCustomTool ] ===================================== 2:692 0:000 === [ GetEfiBootDeviceFromNvram ] ========================= 2:692 0:000 Default boot entry not found 2:692 0:000 DefaultIndex=-1 and MainMenu.EntryCount=4 2:973 0:281 GUI ready  
    • By tluck
      Lenovo T460 macOS with Clover Guide
      Latest Release on GitHub (February 2020) Updated to Clover r5104 Updated Lilu based kexts - Lilu, ALC, WEG Updated acidanthera VoodooPS2 kext v2.1.1 the older 1.9 to the Misc Folder as an option.
        Various Tweaks over Last months The zip file is a complete Clover ESP (/EFI) bundle and kext pack for the Lenovo T460. The current file bundle is tested on Sierra. 
      Note: I never got the GFX fully working on El Capitan. 
      Full Clover file set - config.plist etc. Includes all custom kexts Includes custom DSDT/SSDT scripts and patches Utility scripts The zip bundles are posted to GitHub: https://github.com/tluck/Lenovo-T460-Clover/releases
      Caveat: The T460 systems used here was configured with: i5-6300U, Intel HD Graphics 520, 1920x1080 touch screen. If you have a different system model, then extract the ACPI files and use the included scripts to create a set of files consistent with your system type and BIOS version. See below for details.
      Credits: RehabMan, Shmilee, vusun123, TimeWalker, Mieze from which, much of their work and help is/was was used to get the T460 to this point.
      Devices and aspects working:
      Ethernet -  Intel I219LM is enabled via IntelMausiEthernext.kext WiFi/BT - substitute the Intel WiFi/BT with a compatible Broadcom or Atheros chip Audio - ALC293 codec implemented via AppleALC.kext (the old AppleHDA_ALC293 and CodecCommander kexts are not needed) PS2 - ClickPad + TrackPoint + all 3 buttons - using a modified VoodooPS2Controller to support new layouts - and added some custom Fn key maps based on 440/450 dsdt USB - implemented via custom SSDT + USBInjectAll kext. All USB3/USB2 ports are intel-based and work -  3 external USB and internal Camera, BT, etc  Sleep/Wake - the sleepwatcher package and custom sleep/wake scripts are used to help with sleep/wake for BT and PS2 devices. Note: have not tried to implement the SD card reader - no driver found.
      ACPI Files
      New Installation - Steps and Details
      Part 1 - OS Installation
      Part 2- Post OS Installation and Setup
      Notes on Custom Kexts
       
    • By Jancey
      I used this command: diskutil info disk0s2 | grep -i "Partition UUID" | rev | cut -d' ' -f 1 | rev

      But I accidentally removed the wrong disk and now my main windows drive is not appearing in the bootloader. I can't figure out how to get it back. I tried resetting my windows drive, but I kept getting an error. I also reset my mac and reinstalled Catalina.
    • By gengstapo
      @Hervé
       
      Im having similar issue with my HS setup, dell latitute 3480, i5-7200U
      Once the hdmi plugged in, the laptop display went blank, only could see the external tv
      But, when i put my laptop to sleep & wake up again, both screen got display (hdmi still connected)
      Even the hdmi could be plugged off & in (after sleep), the laptop display is fine
       
      What could be the culprit?
      Dell’s MacBook Pro IORegistry.zip
      config.plist.zip
×