Jump to content
About Just Joined group Read more... ×
K0gen

Lenovo ThinkPad T420 with UEFI Only

5,179 posts in this topic

Recommended Posts

Advertisement

@Tetonne

 

well i am not sure what broke?!

 

I dont see FakeSMC in newer boot logs??? this must not be installed right?

 

1) was it the new dsdt.aml ?

2) was it the new kexts?  maybe issue as DSMOS doesn't arrive?

3) was it new clover 2133 -> 2165 ?

 

may you can replace each item - 1 at time on working configuration?

Share this post


Link to post
Share on other sites

Updated posted Clover b2184 for T420 at post #397

 

  • Clover
    • minor tweaks/refinements to config.plist (e.g. dont think darkwake is needed anymore)
    • has 2 OEM configs - 1 for high-res and 1 for low-res
    • Note: recommend use of ssdt.aml if it fits your cpu - seems to get a bit more out turbo mode (get 32x at times instead of 30x with just Clover Generate P/C states)
  • Revised DSDT
    • for Shutdown hang (thanks to TimeWalker75a)
    • for native ACPIPlatform kext - no need to rollback or patch AppleACPIPlatform.kext - can use unmodified v1.8 from 10.8.5 (see notes below)
  • Kexts
    • ​Updated AppleIntelE1000e.kext
    • Updated ACPIBatterManager v1.40 
    • Updated FakeSMC
      • includes modified ACPI/Plugin Info.plist to remove DISABLED features so FAN speed shows up in HWMonitor (with stock AppleACPIPlatform.kext) 

ACPI Notes:

 

You can remove any patched/rollback AppleACPIPlatform.kext now if you like... but you may want to keep it depending on your preference based on comments below. I am still looking into this issue of course.... not sure if the problem is with the new kext or a dsdt issue.

  • the new DSDT conforms (more) to the native unmodified kexts ACPI spec... so dont have to replace the AppleACPIPlatform.kext. 
  • native AppleACPIPlatform.kext v1.8 (10.8.5) works but seems to have some issues with Power button lights after wake.
  • native AppleACPIPlatform.kext v1.7 (10.8.4) works too - but does not wake as well when you have external eSATA/USB drives. But good news as the v1.7 does not seem to have power light issue.

If you choose not to upgrade to 10.8.5, this new DSDT and the kexts will work in 10.8.4 (or older.) 

Share this post


Link to post
Share on other sites

the last pack (T420-UEFI-Clover-b2184_10.8.5 ) works now :)

the guilty kext was AppleACPIPlatform.kext 10.8.5 so i use AppleACPIPlatform.kext 10.8.4

 

I deleted my previous posts to make the thread clearer

 

Thanks again for this great stuff

Share this post


Link to post
Share on other sites

@Tetonne

glad you got it working - you are welcome - et merci pour testing et feedback.

 

yeah, i am bit suspicious of the 10.8.5 v1.8 AppleACPIPlatform.kext myself and may rollback to the previous rev 1.7.  

 

EDIT: even with the slow blinking light problem after wake-up, v1.8 AppleACPIPlatform seems to be more reliable for me. doesn't  hang up (yet?) like it 1.7 did from time to time - with the fast flashing light when going to sleep and never waking up! 

 

IMO, 10.8.5 with new 8-bit changes in the DSDT overall has made it work better than ever.

Share this post


Link to post
Share on other sites

@All

 

Haven't been on in a while. Life, you know...

 

You guys have made outstanding progress in the few weeks I haven't checked in. In the coming days, I will try to catch up with you 420 guys. Gendalo hasn't been on in a while, so I think I'll be on my own for a little while. And I see Kogen hasn't been on in a while either. I was going to ask if he could add "/430" to the thread title or maybe a mod could do it. I want to attract more 430 users to this thread. I really don't want to break it out into its own thread because the hardware is so similar and you guys have provided (although inadvertently) all the info needed to get this working for us 430 guys.

 

Just want to reiterate my appreciation for all of your work. This is really the only solid, worthwhile 430 hack resource.

Share this post


Link to post
Share on other sites

In the meantime before Mavericks is GA....

 

2 things addressed in the post  #397  for 10.8.5 and T420

 

  1. There was an patch for 10.8.5 (v 12F45) today. I downloaded with App Store and update no problem ... other than it replaced AppleHDA and Bluetooth stuff. So you will need to replace those items! (latest kexts are in the zip)
  2. I added some code in the DSDT to fix the LED issue I had upon wake up. That is where the LED keeps pulsing as if it was still asleep and the moon on the lid stayed on too. now it just resets them to power light steady on and moon off.  so now i am much happier with 10.8.5 ACPI. 

 

Update 4-Oct-2013

  • Revised DSDT
    • for Shutdown hang (thanks to TimeWalker75a)
    • for native ACPIPlatform kext - no need to rollback or patch AppleACPIPlatform.kext - can use unmodified v1.8 from 10.8.5 (see notes below).
    • made a change/fix to reset LEDs upon wakeup.
  • Updated Clover to b2165 b2184
  • Updated AppleIntelE1000e.kext
  • Updated FakeSMC
  • Updated VoodooPS2Controller
  • Added Patched AICPUPM kext for Chameleon compatibility.

Share this post


Link to post
Share on other sites

Tluck-
I got problems when using the vanilla AppleACPIPlatform.kext.
I extracted the kext from the 10.8.5 update using Pacifist. How do you get it?
See attached screenshot of the errors. I had these errors also the other day when I tried to use the vanilla kext.

  
Any ideas?
 
Thanks,
AJ

post-121087-0-13069800-1380927827_thumb.jpg

Share this post


Link to post
Share on other sites

@AJ -

 

 i got the v1.8 AppleACPIPlatoform.kext when i upgraded to 10.8.5. are you 10.8.4 or 10.8.5? The 10.8.0-10.8.4 version AppleACPIPlatoform.kext is 1.7

 

are you talking about SMC errors? i am not totally sure but what version of FakeSMC are you on?

 

are you using the new dsdt?

Share this post


Link to post
Share on other sites

I'm on 10.8.5 and I got your latest FakeSMC and dsdt from today's pack...

The error comes when I use the new AppleACPIPlatoform.kext v1.8. I just had to put back v1.7 to be able to boot...

Share this post


Link to post
Share on other sites

hmm. not sure what to say!? do you get these SMC errors when using the v1.7? are you using the patched version from the 10.8.4 clover bundle? or the standard 10.8.4 v1.7 ?

Share this post


Link to post
Share on other sites

I don't get the SMC errors when using v1.7, it only happens with v1.8.

I believe I am using the patched version of v1.7, it was coming from your previous packs...

Share this post


Link to post
Share on other sites
attached are 3 AppleACPIPlatform kexts - can you test the v1.7 unmod?

 

v1.7 unmod

v1.7 ermac patch

v1.8 unmod

 

these are the only non-apple kexts...

 



$ kextstat |grep -v apple
Index Refs Address            Size       Wired      Name (Version) <Linked Against>
   16    2 0xffffff7f811a1000 0x16000    0x16000    org.netkas.driver.FakeSMC (877) <9 7 5 4 3 1>
   17    0 0xffffff7f811b7000 0x4000     0x4000     org.hwsensors.driver.CPUSensors (877) <16 7 5 4 3>
   30    2 0xffffff7f80811000 0xe000     0xe000     org.rehabman.voodoo.driver.PS2Controller (1.8.8) <9 7 5 4 3 1>
   31    0 0xffffff7f811be000 0x6000     0x6000     org.hwsensors.driver.ACPISensors (877) <16 9 7 5 4 3>
   34    0 0xffffff7f81d16000 0x6000     0x6000     org.rehabman.driver.AppleSmartBatteryManager (1.40) <9 4 3>
   40    0 0xffffff7f80e72000 0x1b000    0x1b000    com.insanelymac.driver.AppleIntelE1000e (2.5.4) <39 10 5 4 3 1>
   52    0 0xffffff7f80834000 0x5000     0x5000     org.rehabman.voodoo.driver.PS2Keyboard (1.8.8) <30 28 7 6 5 4 3 1>
   53    0 0xffffff7f8081f000 0xb000     0xb000     org.rehabman.voodoo.driver.PS2Trackpad (1.8.8) <30 28 7 6 5 4 3 1>

ACPIPlatform.zip

Share this post


Link to post
Share on other sites

Yes, I have copied the latest one from your pack today...

 

aj:~ aj$ kextstat | grep -v apple
Index Refs Address            Size       Wired      Name (Version) <Linked Against>
   19    0 0xffffff7f809cf000 0x1e000    0x1e000    com.rim.driver.BlackBerryUSBDriverInt (0.0.67) <18 17 16 14 13 5 4 3 1>
   22    2 0xffffff7f80ebc000 0x16000    0x16000    org.netkas.driver.FakeSMC (877) <9 7 5 4 3 1>
   23    0 0xffffff7f80ed2000 0x4000     0x4000     org.hwsensors.driver.CPUSensors (877) <22 7 5 4 3>
   37    0 0xffffff7f80ed9000 0x6000     0x6000     org.hwsensors.driver.ACPISensors (877) <22 9 7 5 4 3>
   39    0 0xffffff7f816d3000 0x6000     0x6000     org.rehabman.driver.AppleSmartBatteryManager (1.40) <9 4 3>
   42    2 0xffffff7f808ae000 0xe000     0xe000     org.rehabman.voodoo.driver.PS2Controller (1.8.8) <9 7 5 4 3 1>
   53    0 0xffffff7f808d1000 0x5000     0x5000     org.rehabman.voodoo.driver.PS2Keyboard (1.8.8) <42 34 7 6 5 4 3 1>
   54    0 0xffffff7f808bc000 0xb000     0xb000     org.rehabman.voodoo.driver.PS2Trackpad (1.8.8) <42 34 7 6 5 4 3 1>
   79    0 0xffffff7f81a98000 0x1b000    0x1b000    com.insanelymac.driver.AppleIntelE1000e (2.5.4) <74 10 5 4 3 1>
   87    0 0xffffff7f81b1e000 0x4000     0x4000     com.globaldelight.driver.BoomDevice (1.1) <86 5 4 3 1>
  106    3 0xffffff7f81d4e000 0x43000    0x43000    org.virtualbox.kext.VBoxDrv (4.2.18) <7 5 4 3 1>
  107    0 0xffffff7f81d91000 0x8000     0x8000     org.virtualbox.kext.VBoxUSB (4.2.18) <106 51 13 7 5 4 3 1>
  108    0 0xffffff7f81d99000 0x5000     0x5000     org.virtualbox.kext.VBoxNetFlt (4.2.18) <106 7 5 4 3 1>
  109    0 0xffffff7f81d9e000 0x6000     0x6000     org.virtualbox.kext.VBoxNetAdp (4.2.18) <106 5 4 1>

Share this post


Link to post
Share on other sites

my feed back

test last pack (serial would be great to identify with pack we're talking about) with

FakeSMC20130706 +

AppleACPIPlatform kexts 1.8

 

​same issue as described here (same as with last pack in fact)

back to last pack (same as above) with include Fake SMC and AppleACPIPlatform v1.7 ermac patch

 

i suggess T420-UEFI-Clover-20131005-2184_10.8.5

 

Update : shut down is very long here

Share this post


Link to post
Share on other sites

@Tetonne  - thanks for testing. i will put ErmaC's patched AppleACPIPlatform.kext in the 10.8.5 bundle as an option for those that need to rollback. It was/is in the 10.8.4 pack. I am not sure why i can run the vanilla kexts?  i tested the old DSDT before splitting into 8bit variables and i can run 1.7  and 1.8  - just dont get battery info. with the new dsdt i can run all 3 versions. The new v1.8 works best and seem to consistently supports esata - before it was hit or miss.  yesterday i bumped up to rehabmans FakeSMC. 

Share this post


Link to post
Share on other sites

I found a fix for very low input volume of the AppleHDA LineIn/ExtMic I have been always experiencing.

 

While spending quite a few hours trying to rename LineIn to ExtMic, I noticed that one of the configuration widgets in the patched version of AppleHDA had been put in the wrong section.

 

The attached file has the following patch. If you have a compatible version of AppleHDA, it should be as simple as dropping it into the appropriate location in the AppleHDA kext, reboot, and your LineIn Mic should be much louder. Otherwise, you may need to make the edits yourself to Platform.xml, and then compress it to Platform.xml.gzip using the `Script RevoGirl AppleHda.zip` from e.g. http://olarila.com/forum/viewtopic.php?f=18&t=2676

--- /Backup Extensions/10.8.2_mods/AppleHDA.kext/Contents/Resources/Platforms.xml 2012-11-26 13:54:20.000000000 -0500
+++ Platforms.xml 2013-10-05 18:38:53.000000000 -0400
@@ -1574,38 +1574,12 @@
  <integer>20</integer>
  </dict>
  <dict>
- <key>Amp</key>
- <dict>
- <key>Channels</key>
- <array>
- <dict>
- <key>Bind</key>
- <integer>1</integer>
- <key>Channel</key>
- <integer>1</integer>
- </dict>
- <dict>
- <key>Bind</key>
- <integer>2</integer>
- <key>Channel</key>
- <integer>2</integer>
- </dict>
- </array>
- <key>MuteInputAmp</key>
- <false/>
- <key>PublishMute</key>
- <true/>
- <key>PublishVolume</key>
- <true/>
- <key>VolumeInputAmp</key>
- <true/>
- </dict>
  <key>NodeID</key>
  <integer>24</integer>
- </dict>
- <dict>
  <key>Boost</key>
  <integer>3</integer>
+ </dict>
+ <dict>
  <key>NodeID</key>
  <integer>27</integer>
  </dict>

Also nice, is enabling Ambient noise reduction. This is done simply by copying the SignalProcessing section from Mic to LineIn, in layout12.xml

 

Finally, and somewhat related, I wrote a script to parse CodecVerbs and pretty print the output for consumption in various places. For example, you can get your ConfigData section from

/System/Library/Extensions/AppleHDA.kext/Contents/PlugIns/AppleHDAHardwareConfigDriver.kext/Contents/Info.plist and inspect it as follows:
./pinconfig.py -v -d -
                    AZccMAGXHRABlx4hAZcfAQG3HCABtx0QAbce
                    gQG3HwEB9xxAAfcdAQH3HhAB9x+QAjccoAI3
                    HQECNx6gAjcfkAG3DAI=
^D
"PinConfigurations",
Buffer(0x44)
{
0x30,0x10,0x21,0x01, /* 0x19        jack, External Rear,  HP Out, 1/8" stereo/mono,    Black, misc 0,                      , 3-0 */
0x20,0x10,0x81,0x01, /* 0x1b        jack, External Rear, Line In, 1/8" stereo/mono,    Black, misc 0,                      , 2-0 */
0x40,0x01,0x10,0x90, /* 0x1f    internal, Internal  N/A, Speaker,          Unknown,  Unknown, misc 0,  Jack Detect Disabled, 4-0 */
0xa0,0x01,0xa0,0x90, /* 0x23    internal, Internal  N/A,  Mic In,          Unknown,  Unknown, misc 0,  Jack Detect Disabled, a-0 */


}


< 01971c30 01971d10 01971e21 01971f01 01b71c20 01b71d10 01b71e81 01b71f01 01f71c40 01f71d01 01f71e10 01f71f90 02371ca0 02371d01 02371ea0 02371f90 01b70c02 >
'\x01\x97\x1c0\x01\x97\x1d\x10\x01\x97\x1e!\x01\x97\x1f\x01\x01\xb7\x1c \x01\xb7\x1d\x10\x01\xb7\x1e\x81\x01\xb7\x1f\x01\x01\xf7\x1c@\x01\xf7\x1d\x01\x01\xf7\x1e\x10\x01\xf7\x1f\x90\x027\x1c\xa0\x027\x1d\x01\x027\x1e\xa0\x027\x1f\x90\x01\xb7\x0c\x02'
AZccMAGXHRABlx4hAZcfAQG3HCABtx0QAbcegQG3HwEB9xxAAfcdAQH3HhAB9x+QAjccoAI3HQEC
Nx6gAjcfkAG3DAI=
 
 

Platforms.xml.zlib.gz

layout12.xml.zlib.gz

pinconfig.py.gz

Share this post


Link to post
Share on other sites

Awesome. yeah i gave up too after trying for hours (days?) to get ExtMic in the config! i will incorporate into AppleHDA for 10.8.5. thanks! 

 

works great - i just dropped in. i completely forgot thats why i bought a USB headset since when i used my iPhone buds/mic the input volume was so low! just tested again it seems to be louder!

 

thanks.

Share this post


Link to post
Share on other sites

  • Recently Browsing   0 members

    No registered users viewing this page.

Announcements

  • Similar Content

    • By y010204025
      Update: On October 24, 2020, using clover to solve the macOS11 beta10 boot problem, you can now enjoy macOS11beta10, and the compatibility of subsequent versions is not guaranteed.
      HIDPI uses a modified version. You can directly execute the hidpi script to get a better experience. If you lose the repair, it is not within the scope of my support.
      Support upgrades without destroying the integrity of the original image.
      There seems to be a problem with the shortcut keys. If you can help solve it, thank you for your contribution.
       
      Perhaps it was the first NEC (Lenovo) Lavie Z HZ550 to install hackintosh. I hope more people who like Lavie Z series can experience Hackintosh at HZ550. She is really great.
       
      I found HZ550 & HZ750 on the Chinese website, which is amazing. It weighs only 790g, 13.3 inches, and the standard 2k screen, which is too attractive to me. I am a Hackintosh enthusiast. I think HZ550 or HZ750 with MacOS is the best Unfortunately, the Lavie Z series is not listed in China, only exists in the Japanese and American markets, and in the Japanese market is the NEC brand, while the American market uses the Lenovo logo.
       
      Fortunately, I got an HZ550 from Taobao. Yes, not HZ750. In comparison, HZ750 has more touch screens and 360 ° flip. These are hard to attract me. More importantly, HZ750 is about 200g heavier than HZ550 That's why I chose HZ550. Well, because he is only 2,000 RMB.
       
      The specific introduction can refer to NEC Japan official website:http://nec-lavie.jp/products/hz13b/
       
      The HZ550 hardware list I obtained:
                                    
                       -/+:.          ningnan@ningnandeMacBook-Air
                      :++++.          OS: 64bit Mac OS X 10.15.5 19F96
                     /+++/.           Kernel: x86_64 Darwin 19.5.0
             .:-::- .+/:-``.::-       Uptime: 19m
          .:/++++++/::::/++++++/:`    Packages: 1
        .:///////////////////////:`   Shell: zsh 5.7.1
        ////////////////////////`     Resolution: 3840x2160
       -+++++++++++++++++++++++`      DE: Aqua
       /++++++++++++++++++++++/       WM: Quartz Compositor
       /sssssssssssssssssssssss.      WM Theme: Blue (Dark)
       :ssssssssssssssssssssssss-     Disk: 11G / 108G (12%)
        osssssssssssssssssssssssso/`  CPU: Intel Core i7-5500U @ 2.40GHz
        `syyyyyyyyyyyyyyyyyyyyyyyy+`  GPU: Intel Iris Graphics 6100
         `ossssssssssssssssssssss/    RAM: 4376MiB / 8192MiB
           :ooooooooooooooooooo+.    
            `:+oo+/:-..-:/+o+/-     
       
       
      Advantages: small size, light weight, 2K screen, 8G memory, 512g SSD, keyboard feels good, and wireless network card can be replaced, which is unimaginable in today's thin and light books.
      Disadvantages: The sound is small, almost the same as the mosquitoes.
       
      Ok, bragging is over!
      In order to use the wireless network, I changed the wireless network card from inter 7265 to BCM94352ZAE. Some people called it DW1560. It is uncomfortable that in China, this card and his elder brother DW1830 were hyped to a high price of 480RMB. of. Fortunately, I bought it early, and this card is also very stable under win10, and there is no high delay and outage. The hard disk should be PM951 of Samsung, not PM981, which is lucky.   Before installing Hackintosh: You need to prepare a 16G U disk, SanDisk is not a rough choice for making MacOS installation disk, I used the latest MacOS Catalina 10.15.5, got config.plist from Rehabman, and put together an EFI, the latest version of clover and kext drivers. Thanks to Rehabman and the developers of the Black Apple community. I do n’t like that OC team very much.
      Make an installation disk: If you have a computer running MacOS, you can use the command line to make it, if you do n’t have a computer running MacOS, you can try VMware, I know that the insanelymac forum allows discussion, or use ether to write the image to U disk, use the EFI I provided to boot into the installation process.   BIOS setting: Press F12 at boot to enter the BIOS settings, Tab switches to "Security-Secure boot", set to "DISable", this is what we need, and switch to "Boot -Boot devices", set the U disk as the first boot item You can directly enter the clover guide interface, please follow it for google it.
      It is worth noting that the remaining space of your EFI partition needs to be greater than 200M, otherwise, the disk format will be wrong. In addition, the format partition format is APFS, do not choose to encrypt, your data is not valuable, at least you must have this awareness of Hackintosh, the file safe is also the same, do not enable, do not use to find your mac, otherwise, change the machine, OK .   Fortunately, no additional ssdt patch is required. All the patch functions are implemented through clover. The flat Apple is turned on. This is to solve the problem of the flower screen. You can find a solution yourself.
      Experience your black apple, this will bring a better experience than MacBook Pro.  
       
    • By Del
      I have been trying to get my Lenovo G570 i5 2430M with HD3000 (id: 116) to work for almost 2 months. Mountain Lion works flawlessly but Mavericks onwards, display stays off with the exact same setup (Chameleon: Extra folder with smbios mbp8,1 included in attachment)
       
      I'm able to boot and see the screen with remote desktop but internal display stays off.
       
      found an old post which fixed issue for few users
       
      I understand HD3000 is natively supported till High Sierra, which is why I'm totally baffled and out of ideas to proceed with.
       
      Any help is greatly appreciated
      Thanks
       
      @jl4c
      Alex.zip
    • By MaLd0n
      -OpenCore Vanilla TUTORIAL-
       
       
      -USB Port Mapping TUTORIAL-
       
        1 -Create a USB bootable
       
      Create your usb installer, use this tool and download Catalina or Big Sur from Apple servers
       
      Catalina
      installScript_allfullapp.zip
       
      Big Sur
      installScript_1016fullapp.zip
       
      Credits: crazybirdy
       
      Copy Catalina / Big Sur installer to Applications folder, open terminal and run
       
      Catalina
       
       
      Big Sur
       
       
      If you want check one step by step, check here
       
      -Opencore Vanilla Tutorial
      https://tinyurl.com/ycvcnp8h
       
      2- EFI folder USB installation
       
      -EFI OpenCore Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition in your USB STICK
      https://tinyurl.com/ybwr9kq3
       
      -EFI Clover Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition in your USB STICK
      https://tinyurl.com/yxsw7d3t
       
      3- EFI folder SSD
       
      -EFI OpenCore Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition SSD 
      https://tinyurl.com/ybwr9kq3
       
      -EFI Clover Folder Desktop 10th Intel Processors
      Paste this EFI folder in EFI partition SSD
      https://tinyurl.com/yxsw7d3t
       
      4- Start Fine Tune
       
      Run this app and post full dump here for full ACPI solution
       
      RunMe.app
      https://tinyurl.com/y9562hz7
       
       
      If you like a SSDT way, here we go
      SSDT-OLARILA.aml.zip
       
      5- USB Solution
      USB INTEL SERIE 400.zip
       
      Use these kexts, enable XHCI port limit patch and follow this tutorial for remap USB ports
       
       
       
      --DSDT PATCHES--
       
      -FIX ERRORS AND WARNINGS -FIX ACPI ERRORS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA SERIE ID -DMAC -REMOVE LINES, PROBLEMATIC and UNUSED -FIX K.P in REBOOT -NVRAM -REAL TIME CLOCK -SLPB -DARWIN / WINDOWS -XHCI -PLUGIN TYPE -HDEF -ARTC -IPIC -TIMR -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -UAR1 -LAN -FWHD -USBX -PMCR -PPMC -XSPI -kUSBCompanionIndex -io-device-location -IMEI -EC -PNLF -ARPT -GFX0 -NVME -ACPI-WAKE-GPE -DTGP -HDMI / HDAU  
      --SCREENSHOTS--































      -If you want to buy me a beer - Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      Big Thanks to XLR and your Badass Motherboard, Ultrafast CPU, Coolest Heatsink, Huge Graphics Card, Tonnes of RAM,
      Gigantic Hard Drive, Lightspeed Disk Burner, Professional Sound Card, Massive LCD Display.
       
       
      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!

      We're all here to have fun and learn from each other!
    • By qmgoqwe
      I have installed MacOS and Windows on the following hardware:
       
      AMD Ryzen 7 3700X MSI B450M Mortar Max Sapphire Radeon Pulse RX 5600 XT 6G Samsung 860 QVO, 1 TB SSD (PciRoot(0x0)/Pci(0x1,0x3)/Pci(0x0,0x1)/Sata(0x5,0xFFFF,0x0)) - MacOS on this disk Kingston A2000 SSD 1TB M.2 2280 NVMe (PciRoot(0x0)/Pci(0x1,0x1)/Pci(0x0,0x0)/NVMe(0x1,15-AD-CD-26-28-B7-26-00)) - Windows on this disk  
      OpenCore 0.6.1 MacOS 10.15.7 both disks GPT UEFI  
      Both OSs boot nicely and work as a charm when selecting either of the disks as boot disks in the BIOS.
       
      However, trying to boot Windows 10 from the Opencore Bootmanager (no matter whether PickerMode=internal or OpenCanopy) causes a Windows Blue Screen ("SYSTEM THREAD EXCEPTION NOT HANDLED").
      To be on the safe side, I have added an appropriate entry to Misc->Entries:
      <key>Arguments</key> <string></string> <key>Auxiliary</key> <false/> <key>Comment</key> <string>Not signed for security reasons</string> <key>Enabled</key> <true/> <key>Name</key> <string>Windows 10</string> <key>Path</key> <string>PciRoot(0x0)/Pci(0x1,0x1)/Pci(0x0,0x0)/NVMe(0x1,15-AD-CD-26-28-B7-26-00)/HD(1,GPT,2E9695CB-0F9A-4005-AADB-2FF9C96AD02C,0x800,0x32000)/\EFI\Microsoft\Boot\bootmgfw.efi</string> It points to the Windows 10 bootmanager on the Windows disk's EFI partition.
       
      What's wrong with that? Why does this cause a BSOD? It is not clear to me why it works when booting from BIOS but not here.
       
      config.plist attached (but maybe it has no relevance for the problem).
      config.plist
×