Jump to content
Kogen Mantis

Lenovo ThinkPad T420 with UEFI Only

4,329 posts in this topic

Recommended Posts

I´m getting occasional KP the last weeks, I never saw that frequent before with Hackintosh.

This is the backtrace:

 

*** Panic Report ***
panic(cpu 1 caller 0xffffff80003ff085): Kernel trap at 0xffffff8000836a6f, type 13=general protection, registers:
CR0: 0x0000000080010033, CR2: 0xffffff81dc581000, CR3: 0x000000000390a000, CR4: 0x00000000000626e0
RAX: 0x0000000000000015, RBX: 0x0000000000000015, RCX: 0xffffff801efd5480, RDX: 0x0000000000000000
RSP: 0xffffff81e68c3c00, RBP: 0xffffff81e68c3c40, RSI: 0xffffff8000c09570, RDI: 0xffffff801effe8c0
R8:  0x0000000000000000, R9:  0xffffff801effe880, R10: 0xffffff801effe8a0, R11: 0x0000000000000000
R12: 0xffffff801effe880, R13: 0xffffff801effe840, R14: 0x447373616c436174, R15: 0xffffff8000c09570
RFL: 0x0000000000010206, RIP: 0xffffff8000836a6f, CS:  0x0000000000000008, SS:  0x0000000000000000
Fault CR2: 0xffffff81dc581000, Error code: 0x0000000000000000, Fault CPU: 0x1, PL: 0, VF: 0
 
Backtrace (CPU 1), Frame : Return Address
0xffffff800014bc50 : 0xffffff80002e950c 
0xffffff800014bcd0 : 0xffffff80003ff085 
0xffffff800014beb0 : 0xffffff800029a543 
0xffffff800014bed0 : 0xffffff8000836a6f 
0xffffff81e68c3c40 : 0xffffff7f82a9b58d 
0xffffff81e68c3c80 : 0xffffff7f82a9c72a 
0xffffff81e68c3ca0 : 0xffffff7f82a9ca6b 
0xffffff81e68c3d30 : 0xffffff7f82a9cbfa 
0xffffff81e68c3d80 : 0xffffff7f82b90326 
0xffffff81e68c3e00 : 0xffffff7f82b90af0 
0xffffff81e68c3e40 : 0xffffff800089793d 
0xffffff81e68c3e80 : 0xffffff800089768e 
0xffffff81e68c3f10 : 0xffffff8000896c46 
0xffffff81e68c3f60 : 0xffffff800089865e 
0xffffff81e68c3fb0 : 0xffffff80002998f7 
      Kernel Extensions in backtrace:
         org.netkas.driver.FakeSMC(1443.0)[F4D6719F-5FF2-3417-8F1B-7CA64314D941]@0xffffff7f82a99000->0xffffff7f82ab1fff
            dependency: com.apple.iokit.IOACPIFamily(1.4)[4F7FB6AD-2498-3F71-827C-ED7AA4BF2511]@0xffffff7f80e1b000
         org.hwsensors.driver.ACPISensors(1443.0)[FC0EE82A-1514-3891-A0AF-6A7947B7EFDF]@0xffffff7f82b8f000->0xffffff7f82b9cfff
            dependency: com.apple.iokit.IOACPIFamily(1.4)[4F7FB6AD-2498-3F71-827C-ED7AA4BF2511]@0xffffff7f80e1b000
            dependency: org.netkas.driver.FakeSMC(1443)[F4D6719F-5FF2-3417-8F1B-7CA64314D941]@0xffffff7f82a99000
 
BSD process name corresponding to current thread: kernel_task

 

Boot args: slide=0 kext-dev-mode=1 rootless=0 

 

 

Does anybody have similar issues with a T420 Sierra recently?

I´ll try with my other T420, which usually has W10 installed, to rule out a hardware error, but I don´t think its the hardware.

 

Off topic:

Did any of you hear from René Trost maybe?

Many will know Rene as one of the kind admins over at OSX86.com / kexts.com or from other hackintosh forums. ;)

Share this post


Link to post
Share on other sites
Advertisement

@goodguess. seem like the ACPIsensor was the reason for KP? can remove it if you still have issues - its a non-essential  fakesmc plugin 

 

@somez - here is another idea to fix graphics issues with High Sierra. I was getting some black lines so I have reverted the Graphics Kexts to the Sierra versions. so far no issues.

$ ls -ld /Library/Extensions/AppleIntel*
drwxr-xr-x  3 root  wheel  96 Apr 14  2017 /Library/Extensions/AppleIntelHD3000Graphics.kext
drwxr-xr-x  3 root  wheel  96 Apr 14  2017 /Library/Extensions/AppleIntelHD3000GraphicsGA.plugin
drwxr-xr-x  3 root  wheel  96 Apr 14  2017 /Library/Extensions/AppleIntelHD3000GraphicsGLDriver.bundle
drwxr-xr-x  3 root  wheel  96 Apr 14  2017 /Library/Extensions/AppleIntelHD3000GraphicsVADriver.bundle
drwxr-xr-x  3 root  wheel  96 Apr 14  2017 /Library/Extensions/AppleIntelSNBGraphicsFB.kext
drwxr-xr-x  3 root  wheel  96 Apr 14  2017 /Library/Extensions/AppleIntelSNBVA.bundle

so to make these load instead of the standard ones, i edited the Info.plist and changed all the versions from 10.x.x to 100.x.x

$ kextstat |grep -i graph
   93   14 0xffffff7f824b1000 0x49000    0x49000    com.apple.iokit.IOGraphicsFamily (519.13) 0C5824DB-F0E8-3C89-90FF-32400837361C <12 7 5 4 3 1>
   99    0 0xffffff7f82531000 0x2e000    0x2e000    com.apple.driver.AppleIntelSNBGraphicsFB (100.0.2) 4651D99C-251F-319C-A742-FE237C8CD3A3 <93 12 11 7 6 5 4 3 1>
  120    3 0xffffff7f8293a000 0x9000     0x9000     com.apple.AppleGraphicsDeviceControl (3.18.44) 02233606-BC28-33FA-AB6F-7D86206B8394 <93 12 7 6 5 4 3 1>
  122    0 0xffffff7f82948000 0x63000    0x63000    com.apple.driver.AppleIntelHD3000Graphics (100.0.2) BF52C5F1-7F69-35F4-935F-3F5F237AC46C <93 12 7 5 4 3 1>
  128    1 0xffffff7f82bc0000 0x3000     0x3000     com.apple.driver.AppleGraphicsControl (3.18.44) 6EA0D4AD-6E3C-37F3-B2EA-13FE0F7B8545 <7 5 4 3 1>

Share this post


Link to post
Share on other sites

 

@goodguess. seem like the ACPIsensor was the reason for KP? can remove it if you still have issues - its a non-essential  fakesmc plugin 

 

@somez - here is another idea to fix graphics issues with High Sierra. I was getting some black lines so I have reverted the Graphics Kexts to the Sierra versions. so far no issues.

$ ls -ld /Library/Extensions/AppleIntel*
drwxr-xr-x  3 root  wheel  96 Apr 14  2017 /Library/Extensions/AppleIntelHD3000Graphics.kext
drwxr-xr-x  3 root  wheel  96 Apr 14  2017 /Library/Extensions/AppleIntelHD3000GraphicsGA.plugin
drwxr-xr-x  3 root  wheel  96 Apr 14  2017 /Library/Extensions/AppleIntelHD3000GraphicsGLDriver.bundle
drwxr-xr-x  3 root  wheel  96 Apr 14  2017 /Library/Extensions/AppleIntelHD3000GraphicsVADriver.bundle
drwxr-xr-x  3 root  wheel  96 Apr 14  2017 /Library/Extensions/AppleIntelSNBGraphicsFB.kext
drwxr-xr-x  3 root  wheel  96 Apr 14  2017 /Library/Extensions/AppleIntelSNBVA.bundle

so to make these load instead of the standard ones, i edited the Info.plist and changed all the versions from 10.x.x to 100.x.x

$ kextstat |grep -i graph
   93   14 0xffffff7f824b1000 0x49000    0x49000    com.apple.iokit.IOGraphicsFamily (519.13) 0C5824DB-F0E8-3C89-90FF-32400837361C <12 7 5 4 3 1>
   99    0 0xffffff7f82531000 0x2e000    0x2e000    com.apple.driver.AppleIntelSNBGraphicsFB (100.0.2) 4651D99C-251F-319C-A742-FE237C8CD3A3 <93 12 11 7 6 5 4 3 1>
  120    3 0xffffff7f8293a000 0x9000     0x9000     com.apple.AppleGraphicsDeviceControl (3.18.44) 02233606-BC28-33FA-AB6F-7D86206B8394 <93 12 7 6 5 4 3 1>
  122    0 0xffffff7f82948000 0x63000    0x63000    com.apple.driver.AppleIntelHD3000Graphics (100.0.2) BF52C5F1-7F69-35F4-935F-3F5F237AC46C <93 12 7 5 4 3 1>
  128    1 0xffffff7f82bc0000 0x3000     0x3000     com.apple.driver.AppleGraphicsControl (3.18.44) 6EA0D4AD-6E3C-37F3-B2EA-13FE0F7B8545 <7 5 4 3 1>

 

Hey tluck,

 

Thanks for still trying to fix this. Could you give me more details on the steps how to do this? I get the idea, but not sure how to do it.

 

Thank you.

Share this post


Link to post
Share on other sites

Hello, what's the app shown on the thread thumbnail?e6e5380ce5a2273765b2569792c11274.jpg

 

Sent from my Redmi 3S using Tapatalk

Share this post


Link to post
Share on other sites

I'm trying to get my T420 running Higher Sierra stable but after being logged in for about 20 minutes (and usually when I'm not actively doing anything), the OS would lock up but my mouse would still be usable; I wouldn't be able to click on anything though. It sometimes turned into the spinning beach ball but would otherwise be non-functional.

 

Anyone else run into a similar issue? I'm not sure how to log the crash if this is indeed a crash but I can post logs if someone could tell me how to record it. Any suggestions?

Share this post


Link to post
Share on other sites

I'm trying to get my T420 running Higher Sierra stable but after being logged in for  about 20 minutes (and usually when I'm not actively doing anything), the OS would lock up but my mouse would still be usable; I wouldn't be able to click on anything though. It sometimes turned into the spinning beach ball but would otherwise be non-functional.

 

Anyone else run into a similar issue? I'm not sure how to log the crash if this is indeed a crash but I can post logs if someone could tell me how to record it. Any suggestions?

You are not alone, but we have no idea why is this happening so far :(

Share this post


Link to post
Share on other sites

@Somez: Have you tried booting into safe mode? One of the articles I came across through googling my console errors show resolution when they just boot into safe mode and then back into normal mode. It did seem to resolve that particular error for me; I'm still testing to see if it freezes.

 

I don't know much about macs except as a normal users on a regular MBP; this is my first go-round with a hackintosh so forgive me for probably some stupid suggestions.

 

For another one of my console errors, I came across this (below); not sure if that is causing issues with kexts.

 

User-Approved Kernel Extension Loading

macOS High Sierra 10.13 introduces a new feature that requires user approval before loading newly-installed third-party kernel extensions (KEXTs). When a request is made to load a KEXT that the user has not yet approved, the load request is denied. Apps or installers that treat a KEXT load failure as a hard error will need to be changed to handle this new case.

 

https://developer.apple.com/library/content/technotes/tn2459/_index.html

Share this post


Link to post
Share on other sites

I haven’t tried booting into safe mode yet. I’m waiting for updates to come out, hoping they will eventually solve this problem.

 

I’m also not an expert of hackintoshing. I’d used many Macs before and in fact we’ve just bought an Air to my wife as it was on sale in Hungary. However buying another one for me as a hobby does not justify the price so I stick with the T420.

 

In fact I just basically follow the instructions here created by tluck. He is the expert and the heart of this topic :) “Unfortunately” as I understand so far he does not suffer from the freezing issue which obviously makes finding the root cause and the fix harder.

 

I’m also considering the option to do a clean install of high sierra because my existing installation is an upgrade from Sierra.

Share this post


Link to post
Share on other sites

@Somez: Booting into safe mode is pretty easy so I would suggest trying that before the clean install; however, a clean install is often a good idea if I've learned anything from my Windows days. Here is the article that gave me the safe mode suggestion: http://brettterpstra.com/2017/10/20/have-you-tried-rebooting/

 

For what it is worth, my freeze problems have seem to disappear after trying safe mode. Fingers crossed!

Share this post


Link to post
Share on other sites

Hi, I need your help.

yesterday I had to reinstall High Sierra on my T420. All is working fine with the latest Clover.zip package. But after wake from sleep my power led and sleep led on the cover keeps flashing.

Everything else works fine after sleep. I need to reboot, of course, for both leds to stop flashing.

 

Do you have ideal what can cause that? I have disabled hibernation and removed sleep image (hibernate mode set to 0).

OK I think I found the problem. For many years I had installed external disk in CD Bay instead of CD Drive. When I put CD Drive back, or just remove the external drive from CD Bay, led behaves as it should. So something is not right with the external drive sitting in the cd bay, then.

Edited by jus12

Share this post


Link to post
Share on other sites

@jus12 - hmm. strange - there is fix in the DSDT that address this issue - reset LED upon wake from sleep. so i dont know why it would still flash? i presume you have the custom DSDT in place?

Share this post


Link to post
Share on other sites

@jus12 - hmm. strange - there is fix in the DSDT that address this issue - reset LED upon wake from sleep. so i dont know why it would still flash? i presume you have the custom DSDT in place?

 

Hi tluck, thanks for the update. Well, it is strange. I have been using your packages for years now with a great success. I have never created dedicated DSDT. I was always using yours. For my W520 I had created one but not for T420.

So all files I'm using as they are in your packs.

 

So I have tried to use DSDT files from previous (working) builds. But no change. Latest HS maybe have changed something? I'm running now 10.13.3.

Edited by jus12

Share this post


Link to post
Share on other sites

I would really appreciate if someone here can give the steps for downgrading from High Sierra to Sierra on T420. Should I reformat system partition and when should I do it? There are a lot of questions actually, I cannot afford experiments because T420 is the only one computer I have at the moment... Thanks everyone for help.

Share this post


Link to post
Share on other sites

@rollitab - For the T420, an OS downgrade is under the constraints or process as a real mac. so you can follow the recipes posted in a variety of locations. but most seem to involve  an erase, (clean full) install and restore of data/apps

 

what issues are you seeing with High Sierra. ?

 

somez is seeing some issues - but does  not seem to be the BRSYNC/Hang problem common with HD 3000 - seems to be a different issue. 

But on one of my systems I had some gfx/hangs with BRSYNC/VRSYNC - but since I have reverted the graphics kexts to the Sierra versions, so far so good.

 

sleep/wake ok for me. LED power light goes from slow on/off during sleep to on for wake - moon icon on lid switches to battery icon for wake.

Edited by tluck

Share this post


Link to post
Share on other sites

@tluck, I've just noticed that the LEDs on the outside of my LCD does not work. Let's stop investigating my issue because something is odd here. I'll do a backup and then a clean install from scratch hoping the issue will go away.

Share this post


Link to post
Share on other sites

OS sierra.

 

I reinstalled the system couple months ago and finally want to connect to an external monitor.

 

The DP port on the side is not working?!!... The VGA works fine but I got some shadows.

 

I did appy the patch in the clover and use 8.1 as system. What did I do wrong?

 

Thanks

 

The second issue I found is there is no USB wake up on this laptop. Lenovo website says press the bottom is the only way to wake up the laptop. Is that true?

Share this post


Link to post
Share on other sites

@fireROR -

 

odd, the DP on my system works? i use the DP to connect to my HP monitor. what happens when you attach the DP cable? it should flash and recognize something attached?

 

not sure about USB wake. i have not tried it.  i use BT mouse and keyboard.

Share this post


Link to post
Share on other sites
On 28.2.2018 at 4:53 PM, tluck said:

But on one of my systems I had some gfx/hangs with BRSYNC/VRSYNC - but since I have reverted the graphics kexts to the Sierra versions, so far so good.

 

Could you please describe more detailed how to do this.

Thanks in Advance

Share this post


Link to post
Share on other sites
On 3/3/2018 at 6:52 PM, tluck said:

@fireROR -

 

odd, the DP on my system works? i use the DP to connect to my HP monitor. what happens when you attach the DP cable? it should flash and recognize something attached?

 

not sure about USB wake. i have not tried it.  i use BT mouse and keyboard.

 

Just nothing. Doesn't matter boot with DP or plugin after boot. No signal at all.

The VGA port will not put the monitor into sleep. Not sure what was wrong.

My LCD screen is 1080p but it should not relate to this issue, (I have to use another inject to get intel video card working)

Share this post


Link to post
Share on other sites

Running Sierra, should i update to high sierra? howse the stability?

Share this post


Link to post
Share on other sites
4 hours ago, zalien said:

Running Sierra, should i update to high sierra? howse the stability?

I'm having constant freezes after every like 30 minutes, but most of the people does not suffer from this since I have not seen any complaints from others.

Share this post


Link to post
Share on other sites

well on High Sierra, I have 2 T420 systems. One has an AUO LCD display and has freezes. and the other has LG LCD display (replaced the original AUO) and works great.

 

Share this post


Link to post
Share on other sites

I don't plan on replacing the LCD, so I'm really considering the option to format and install Sierra. Especially that based on the comments almost nobody has reported the freezing issue with High Sierra and we have no clue about what is causing the freezes.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By MikixIT
      Ciao ragazzi! Grazie a questo forum con gente fantastica, sono riuscito a installare OS X e in seguito Win 10 su Clover SULLO STESSO HARD DISK
      Ho un problema, di solito utilizzo Kali Linux, la famosa versione di linux in usb in live
      Ora avrei la necessita di dedicargli 15gb di partizione del mio Hard Disk PER INSTALLARLA, e l'ho fatto effettivamente creando una partizione VUOTA tramite utility disco di Sierra.
      Il problema sorge quando io vado a riavviare il pc e quindi ritrovandomi nella schermata di clover, e vedo sempre il solito OSX e il recovery Osx e al posto di Windows 10, mi trovo la partizione di 15gb che avevo creato per windows(con l'icona di windows)
      Siccome ho paura di perdere i dati importanti che avevo su windows, non ho continuato installando Kali, ma mi sono fermato e ho eliminato la partizione sempre da utility di Sierra e come per magia, riavvio e Win10 è di nuovo lì dove dovrebbe stare
      Appena creo la partizione vuota, clover me la sostituisce
      Che devo fare raga?
      Io voglio OSX,Win10 (Che già ho) e Kali(Solo 15gb) sullo stesso hard disk
      Senza perdere dati di Win o Mac
      Gengik ho visto in precedenti discussioni tue, di andare in GUI da clover config . e togliere Windows da quelli nascosti e l'ho fatto, ma il risultato non cambia.
      Grazie per la lettura
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&amp;t=6771     First... If you need DSDT edits for SkyLake, KabyLake or CoffeeLake... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Post Ioreg, extract with Ioreg Explorer http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222606 -Run it, post files generated in your desktop http://www.insanelymac.com/forum/index.php?app=core&module=attach&section=attach&attach_id=222609  Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder  CLOVER.zip   --Install Sierra/High Sierra and boot into system!   Post Installation   --Install Clover in HDD/SSD and replace with my folder CLOVER.zip   --Reboot and activate video!   -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   --DSDT My DSDT with Skylake patches DSDT.MaLd0n GA H110M-S2.zip Patches -FIX ERRORS AND WARNINGS -HPET -SATA -DMAC -SLPB -DARWIN -LPC -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -PNLF -HDMI --FakeSMC https://bitbucket.org/RehabMan/os-x-fakesmc-kozlek --Audio https://github.com/vit9696/AppleALC --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads --LAN http://www.insanelymac.com/forum/topic/287161-new-driver-for-realtek-rtl8111/   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!  
    • By MaLd0n
      Now have a Olarila app, just download app and clover folder for your Chipset! https://olarila.com/forum/viewtopic.php?f=81&amp;t=6771   First... If you need DSDT edits for SkyLake, KabyLake or CoffeeLake... -Post your full Clover folder with original tables in Origin folder(Extract with F4 in Clover boot screen) -Run it, post files generated in your desktop RunMe.app  Installation   --Create a bootable copy of macOS Sierra Check out the link http://www.insanelymac.com/forum/files/file/559-flash-drive-maker/   --Create a bootable copy of macOS HighSierra Check out the link http://diskmakerx.com/   --Install Clover in USB stick https://sourceforge.net/projects/cloverefiboot/files/Installer/   --Replace with my Clover folder  CLOVER.zip   --Install Sierra/High Sierra and boot into system!   Post Installation   --Install Clover in HDD/SSD and replace with my folder CLOVER.zip   --Reboot and activate video!   -Nvidia WebDriver Sierra http://www.insanelymac.com/forum/topic/312525-nvidia-web-driver-updates-for-macos-sierra-update-07212017/ -Nvidia WebDriver High Sierra http://www.insanelymac.com/forum/topic/324195-nvidia-web-driver-updates-for-macos-high-sierra-update-10162017/ -Cuda http://www.insanelymac.com/forum/topic/302795-cuda-90214-is-out-update-10162017/   --DSDT My DSDT with patches for Skylake DSDT.MaLd0n ASUS Z170M PLUS.zip   Patches -FIX ERRORS AND WARNINGS -HPET -SATA -SLPB -DMAC -DARWIN -LPC -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -RTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -USBX -PMCR -EC -IMEI -PNLF -HDMI --FakeSMC
      http://www.hwsensors.com/releases   --Audio https://github.com/vit9696/AppleALC   --USB https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads   --LAN https://github.com/Mieze/IntelMausiEthernet   -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!   Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad and many, many, many others!   We're all here to have fun and learn from each other!   ENJOY!
    • By thomaspetersen
      Hi All
       
      I'm trying to start a Hackintosh High Sierra 10.13.5 installation:
      - MSI B350 PC Mate
      - Ryzen 5 - 2600
      - Radeon Pro 580 GPU
      - 4 x 8GB DDR4
      (Have a working clover bootloader for HS 10.13.3 - but for some reason, I can't use that setup with the 10.13.5) 
       
      Have tried different bootloader setup, with different outcomes...
      ATM. I get this error/hang - "Unknown CPU: family = 0x17, model = 0x8, Stepping = 0x2"
      Have search google, and can see that the threads ppl. are getting this, is when they look at "About this mac", I haven't yet installed the OSX.
       
      So can someone help...

      I'm running the newest Kexts: AppleALC, FakeSMC, Lilu, RealtekRTL8111, USBInjectAll and WhateverGreen.
      In Bootloader setup, i'm running: -v, -s, -f, -no_compat_check, busratio=34, PCIRootUID=1, npci=0x2000, dart=0 and nv_disable=1
      In SMBIOS i'm using the iMac18,2 and in RT i'm using BooterConfig: 0x28 and CsrActiveConfig: 0x67
      In installed drivers i'm using: AptioMemoryFix, EmuVariableUefi-64, OsxAptioFixDrv-64 (Have tried Fix2 as well)
       
      But i'm, keep getting the Unknown CPU hang/error, can someone help...
      Or do someone have a setup with the same CPU and GPU, that can show me his/her setup for Bootloader/Kexts...
×