Jump to content
Kogen Mantis

Lenovo ThinkPad T420 with UEFI Only

4,544 posts in this topic

Recommended Posts

@vanmanradio - are you using the provided T420s DSDT which defines the PS2K/Trackpad as LENOVO/T420 ?

 

but yes the Trackpad Info.plist is where to focus and if the T420 key is defined will pick up those values vs default. I know that changing MouseMultiplier is one thing that may change the trackpoint behavior. i am not near my system right now and cannot remember if VoodooPS2mouse has any impact. 

 

so i changed MouseMultiplier from 6 to 2 - TrackPoint seems less jumpy - just have to push a little harder!

Edited by tluck

Share this post


Link to post
Share on other sites
Advertisement

Under sierra bêta 10.12.1 (16B2327e)

For unknown reason F1...F12 + sound buttons + and - don't work any more

i can't set sound anymore

i re intall VoodooPS2Controller.kext from previous pack

but with no sucess

Share this post


Link to post
Share on other sites

@Tetonne -

 

For well known issues on Sierra, there is a nice whats broken in 10.12.x on another popular hack site by RehabMan.

 - but yes F1- F12 stopped working with Sierra on all PS2 Hacks

 - same with Audio buttons etc on Laptop.

 

So install Karibiner-Elements and it will allow the F keys to work again.

So to support Karibiner-Elements - I turn off the custom key maps in VoodooPS2Keyboard.kext Info.plist

 

so stay with current kext pack and install Karibiner-Elements. i am using the default key maps in K-E.

 

 

-----

 

Battery topic 

 

so i was curious as to much power my system actually uses.

 

with 1 SSD, running on 9 cell battery - killed apps and let it settle down.

the fans turn at 1920RPM, and CPU is 99% idle. 

with LCD set to low brightness - 2 bars,  cocobattery says it is draining the battery at right around 7 watts

with LCD set to max brightness, cocobattery says it is draining the battery at right around 11.5 watts.

 

with my battery, it says full charge is 7465 mAh vs 7950 (original design capacity) - so it is about 6 % degraded.

 

at 12 volts * 7.5 Ah = 90 Watt Hour

lets say my idling power is around 10 watts on average - that means the battery would lasts about 9 hours. not bad.

but actually using the system for doing heavy work - compiling, copy files, etc - and jumps the power to 45 watts  - the battery lasts about 2 hours. 

Share this post


Link to post
Share on other sites

@tluck -

 

Yes, I'm using the T420s DSDT. I'll mess about with the values and see what happens, it does seem like smoothness comes with the downside of having to push the point very hard.

 

Thanks for your reply.

Share this post


Link to post
Share on other sites

there are quite a few parameters to mess with - Resolution, Divisor. let me know what you come up with.

Share this post


Link to post
Share on other sites

Hello guys.

It's my first post and hope I don't something wrong.

My english is not very good but i try follow this guide and i have now a working T420 with macOS Sierra. ( Really thanks tluck about guide )

That post is for 2 questions. Im not sure i understand all good...

 

1) Its normal audio and trackpad do not work with Sierra OS at the moment, right ? Something other don't work with Sierra OS ?

2) I understand the wifi card don't work and to replace it, i need mod the bios. Right ? I have the 1.46 Version, where i can find the right mod ?

 

Thanks Alberto

Share this post


Link to post
Share on other sites

Hello guys.

It's my first post and hope I don't something wrong.

My english is not very good but i try follow this guide and i have now a working T420 with macOS Sierra. ( Really thanks tluck about guide )

That post is for 2 questions. Im not sure i understand all good...

 

1) Its normal audio and trackpad do not work with Sierra OS at the moment, right ? Something other don't work with Sierra OS ?

2) I understand the wifi card don't work and to replace it, i need mod the bios. Right ? I have the 1.46 Version, where i can find the right mod ?

 

Thanks Alberto

 

Hey Alberto!

 

1. Do you mean you don't have sound at all? That's not normal. Trackpad is also working but there is no configuration screen in Settings.

2. Here you can find the 1.46 without whitelist.

Share this post


Link to post
Share on other sites

@Somez

 

Thanks your fast reply.

U are right sorry !!! About Audio i see the grey volume graphics and think don't work ! I put headphone and its work !! Really Sorry !! :)
About Bios Mod i try download and try use it !!

Thanks !!

Share this post


Link to post
Share on other sites

Hi all, I know my ultrabook is not the sane as this laptop, but do you think some of this guide will work for mine

 

Samsung NP540u3c-A02UK ultrabook

Core i3, Intel HD 4000.

6gb ram.

 

All advice is appreciated. Thanks

 

Sent from my SM-G928F using Tapatalk

Share this post


Link to post
Share on other sites

@NSCXP2005

well. many aspects should be the same in terms of the process, but there may be significant differences depending on the devices - meaning the custom kexts may not apply.

 

key devices to check:

 

1) ethernet

2) audio codec 

3) bluetooth 

4) gfx - HD 3000 vs HD4000

 

the DSDT will be very different.

Share this post


Link to post
Share on other sites

@tluck

 

Hello Sir,

 

Thanks for let us turn our Lenovo T420 systems into MacBook Pro.

 

I am facing two problems.

 

(1) - I tried to install several time but there is no sound at all. Neither from speakers, nor through headphone/mic combo jack. (I don't have Camera+Mic module in my laptop) and I could not check whether is WiFi working or not as don't have any device to connect with my laptop,

 

(2) - I converted the installer for MBR installation and it also works fine like as for GPT scheme. but in both case, my system boots only with USB installer.

 

Could you please teach me how to make my HDD bootable.

 

Moreover, I want to prepare my system for three operating systems: Mac OS X, Windows 7/10 and Ubuntu with MBR scheme. Please instruct me how do I accomplish this.

 

Thanking you in advance.

 

My system specs is:

 

Lenovo T420,

Model: 4236Y19

Core i5 2520M

BIOS: 83ET78WW 1.48

Chipset: Intel Cougar Point QM67, Intel Sandy Bridge

4 GB DDR3-1333

Intel HD Graphics 3000

Conexant Cx20590 High Definition Audio Controller

Intel 82579LM Gigabit Ethernet Adapter

Intel Centrino Advanced-N 6205 AGN 2x2 HMC WiFi Adapter

No WWAN module

No Camera+Mic module

 

3 primary partitions of 40gb and 1 extended with two equal volumes of remaining space.

Share this post


Link to post
Share on other sites

@Naveed

- what version of OSX?

 

audio etc.

- did you install the kexts in /Library/Extensions with the script?

 

boot from HD vs USB

do you have MBR or GUID format on your HD? UEFI will boot with GUID formats. if so, did you install everything in the ESP?

Share this post


Link to post
Share on other sites

@Naveed

- what version of OSX?

 

audio etc.

- did you install the kexts in /Library/Extensions with the script?

 

boot from HD vs USB

do you have MBR or GUID format on your HD? UEFI will boot with GUID formats. if so, did you install everything in the ESP?

 

Thank you very much for your quick reply.

 

Currently I have 10.11 (15A283), and 10.11.6 (Russian version USB installer for MBR scheme :().

I just asked a friend to download 10.11.6 and 10.12 from App Store for me.

 

Yes I did. As I am a newbie and don't have sound knowledge about hackintosh, I followed all of your instructions step by step.

 

I tried both schemes (first GUID then MBR). and installed Clover onto ESP as well.

Share this post


Link to post
Share on other sites

@naveed - once you have 10.11.x  installed you can update it from the App store yourself. 

 

but if you have installed the AppleHDA_20672.kext in /Library/Extensions you should have sound if the symbolic link in there is working.

 

run these 2 commands and post output - it should look like this:

$ ls -l /Library/Extensions/AppleHDA_20672.kext/Contents/MacOS/
total 8
lrwxr-xr-x  1 root  wheel  64 Oct  2 18:21 AppleHDA -> /System/Library/Extensions/AppleHDA.kext/Contents/MacOS/AppleHDA
$ kextstat|grep HDA
   98    2 0xffffff7f813ad000 0xf000     0xf000     com.apple.iokit.IOHDAFamily (278.17) 4D67014F-C71C-3131-ADD7-06B7656635FD <5 4 3 1>
   99    1 0xffffff7f813bc000 0x1d000    0x1d000    com.apple.driver.AppleHDAController (278.17) 9EB8D69B-2DC4-3558-9862-3945D2020F03 <98 97 78 12 7 6 5 4 3 1>
  120    0 0xffffff7f8155e000 0xb4000    0xb4000    com.apple.driver.AppleHDA (999.99) 89A4089D-2773-36AF-ACBB-EDF02A4C3127 <119 99 98 97 84 78 12 11 6 5 4 3 1>

so is your HD MBR or GUID now? 

Share this post


Link to post
Share on other sites

@naveed - once you have 10.11.x  installed you can update it from the App store yourself. 

 

but if you have installed the AppleHDA_20672.kext in /Library/Extensions you should have sound if the symbolic link in there is working.

 

run these 2 commands and post output - it should look like this:

$ ls -l /Library/Extensions/AppleHDA_20672.kext/Contents/MacOS/
total 8
lrwxr-xr-x  1 root  wheel  64 Oct  2 18:21 AppleHDA -> /System/Library/Extensions/AppleHDA.kext/Contents/MacOS/AppleHDA
$ kextstat|grep HDA
   98    2 0xffffff7f813ad000 0xf000     0xf000     com.apple.iokit.IOHDAFamily (278.17) 4D67014F-C71C-3131-ADD7-06B7656635FD <5 4 3 1>
   99    1 0xffffff7f813bc000 0x1d000    0x1d000    com.apple.driver.AppleHDAController (278.17) 9EB8D69B-2DC4-3558-9862-3945D2020F03 <98 97 78 12 7 6 5 4 3 1>
  120    0 0xffffff7f8155e000 0xb4000    0xb4000    com.apple.driver.AppleHDA (999.99) 89A4089D-2773-36AF-ACBB-EDF02A4C3127 <119 99 98 97 84 78 12 11 6 5 4 3 1>

so is your HD MBR or GUID now? 

 

Thanks again tluck :)

 

I'll try these commands and let you know the result, but I don't know what is symbolic link meant to.

 

Currently I prepared my HDD with GUID but I love to use MBR system as I am familiar with it.

I also have a 250gb spare drive to play with Operating Systems.

 

Could you please teach me also (or refer to some post) how can I use Windows 7/10 and Ubuntu along with OS X.

 

Thanking in advance.

Share this post


Link to post
Share on other sites

UEFI and GUID is the way to go - forget MBR - it was how it was done last decade. 

if you are online with your T420 - sign in the App Store - check for updates then run the updates to get the OS to the latest.

 

if you installed the kexts with the included _kext-install.command script it will fix the symbolic links - which is a file that points to another file - in this case the AppleHDA binary.

and if you have installed the custom zip configuration files on the USB or the HD, then you will get the proper codec patching etc.

Share this post


Link to post
Share on other sites

Updated the zip - minor kext updates etc.

Changed some params etc to get the TrackPoint working pretty smooth now. 

 

But yeah, the latest 10.12.1 beta 3 is showing some nice improvements - less glitchy on the GFX front and some of the keys started working again.

 

The VoodooPS2 maps are not totally working as expected in this latest beta - some work but the F1/F2 is doing weird both LCD and Audio at the moement, so I have removed them as a default for now. I am using Karabiner-Elements to map my keys using the F1-F12 default layout. However, the "just working again" Audio Keys above F1-F3 dont work!

Share this post


Link to post
Share on other sites

Hi tluck, I'vs upgraded 4/10 .zip file but wireless card not working (the icon show hardware not installed). Back to 18/9 .zip file then it working again.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By JhonneR
      Good morning, everyone, I'm sorry if I was wrong in choosing the topic but I need help.
      I have found it extremely difficult to mount a Hackintosh in my acer.
      Setup;
      I5 2430m 2.4 6GB RAM
      Mobo P5we0 - Intel intel Graphics 3000
      At the moment I have not found out what my audio codecs are.
      but I'll leave the link on the motherboard.
      however, my real problem is several.
      I have already used the itakos image, I have already used several images that could be installed normally and that after installing the image I do not have internet via cable or wireless.
      And another, I already looked in other forums and I know that I will be called a donkey in the logical question but I have not been able to install the [url=&quot;http://www.insanelymac.com/forum/topic/279450-why-insanelymac-does-not-support-tonymacx86/&quot;]#####[/url] or clover to start from the Hard Disk, so I do not know what to do.At the moment I still do not know if there has already been someone who has already installed the High Sierra or just the Sierra in this notebook model and obtained permanent success.
      If anyone can help me, I'll be grateful.
      Installations without success, but with the system already installed in ACER;
      SIERRA
      HIGH SIERRA
      MOJAVE
      All with the same symptom. Starting only by the bootable USB stick and without internet connection via cable and wireless.
      Appreciate ! Acer 5750 Official Page
    • By Slice
      Since rev 4844 Vector Themes are supported and there are ready-to-use Clovy by Clovy, cesium by Slice and BGM_SVG by Blackosx.
      You may see it's structure to create own theme
      -------------------------------------------------------------------------------------------------------------------------------------------------------
       
       
      Now I want to add vector graphics support in Clover. See rev 4560 and later.
      It is not working yet but designers may begin to create Vector Themes.
      It supposed to consist of SVG elements and has design size. It will be rendered to any screen size scaled from design size.
       
      What application in macOS can create SVG graphics?
      Inkscape is not working in macOS 10.11+. Pity.
      LibreOffice Draw works with SVG but buggy.
      Boxy SVG cost 10$ but looks good enough. It creates the best in simplicity files and have more then enough features.
      Illustrator is good but expensive.
       
      How to improve SVG file?
      Clover has restricted support for SVG. It is your job to make compatible file and as small as possible to speedup rendering.
      Some helps:
      Help:Inkscape – From invalid to valid SVG Inkscape files
      From invalid to valid SVG Adobe Illustrator files
      From invalid to valid SVG files of other editors: BKchem, ChemDraw and CorelDRAW
      Help:Illustrator – Assistance with creating and saving SVG images in Adobe Illustrator that will pass W3C validation
      User:Quibik/Cleaning up SVG files manually
      Later I will write own instructions specific to Clover abilities.
       
      How to create SVG fonts?
      You can google to find ready-to-use SVG fonts.  I found some problems with too beaty fonts: slow rendering and overflow crash. Be careful.
      You can get ttf or otf fonts and convert them into svg by using online WEB services. Not a problem to google.
      But then I want to find a way to simplify the font to reduce a size and speedup rendering.
      You can create own font by FontForge It is opensource and available for Windows, Mac and GNU+Linux. It creates otf font which you can convert to svg font.
       
      Pictures from Badruzeus
      https://www.insanelymac.com/forum/applications/core/interface/file/attachment.php?id=301597
    • By ludufre
      Installing macOS Mojave on Lenovo ThinkPad L440

       
      There are two version of this laptop:
      - 20AS = Chipset QM87, without Express Card (mine).
      - 20AT = Chipset HM86, with Express Card.
      I strong believe is the same thing...
       

      Changelog:
       
      02/05/2019 18:47h GMT-0
      - Updated info about CPU replacement and 4G LTE modem.
       
      02/04/2019 15:24h GMT-0
      - Sometimes the VoodooHDA.kext doesn't work.
      - Added AppleHDADisabler.kext to fix that (attached bellow).
       
      01/24/2019 14:42h GMT-0
      - Added more adjustments to use of VoodooHDA.
      - Updated VoodooHDA links to 2.9.1 official (without installer).
      - Changed PCM volume from 90 to 180 in Info.plist (attached modified VoodooHDA.kext bellow)
      - Updated SSDT-L440.aml (Removed HDEF and HDAU, not needed).
      - Updated config.plist (Changed to user Audio layout to 1).
       
      01/22/2019 20:47h GMT-0
      - I gave up on the AppleALC.
      - Headset does not work.
      - Now with VoodooHDA is perfect and the sound even louder.
       
      01/22/2019 14:37h GMT-0
      - Add info about update 10.14.3. 
       
      01/22/2019 13:46h GMT-0
      - Add link to BIOS reassing guide.
       
      01/20/2019 11:49h GMT-0
      - First version.
       
      What works and what does not
       
      - Processor: Intel Core i5-4300M ->  Work. All SpeedStep stages.
      - Video Card: Intel HD4600 ->  Work. QE/CI and Metal.
      - Chipset: Intel QM87 ->  Work.
      - Mini DisplayPort ->  Work. But no audio, yet.
      - VGA ->  Not work. Normal.
      - Audio: ALC292 ->  Work.
      - WiFi/Bluetooth: Intel AC 7260 ->  Not work. Replaced with DW1560 (need whitelist removal).
      - Ethernet: Intel I217-LM ->  Work.
      - Card Reader: Realtek RTS5227 ->  Not work.
      - Keyboard and Touchpad ->  Work.
      - Webcam ->  Work.
      - Fingerprint Reader ->  Not work. Normal.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
      - Airdrop, Handoff, Instant Hotspot and Continuity ->  Work after replaced wireless.
       
       
      Extras
       
      - FullHD 1920x1080 display upgrade: 
      Replaced with AU Optronics B140HAN01.1 30pin eDP (B140HAN01.2 and B140HAN01.3 also compatible)
      Apparently same screen as Dell Latitude E6440, E7440, Lenovo Ideapad U430 and E129.
       

      Todo
       
      - Make DP audio work.
      - Make Card Reader work.
      - Upgrade CPU to i7-4712MQ (Ordered. It's on the way) Done, but received i7-4700MQ (47w TDP and I have overheating issues)
      - Replace touchpad with T460 model (Ordered. It's on the way)
      - Sierra Gobi5000 4G LTE modem EM7355 (Ordered. It's on the way. I hope works. ) Done, but not work. Do not even recognize in LSPCI...
      - Upgrade to 16GB RAM Done
       
       
      What you need to install

      - Running install of macOS
      - One USB flash drive of 8GB or bigger
      - macOS Mojave install app
      - Clover EFI
      - Clover Configurator
      - Some KEXTs and SSDT patches


      How create create the install flash drive
       
      Prepare install flash drive

      Format the flash drive with GUID partition mapping and name it "Install".

      - Open Disk Utility.
      - Click in View, then "Show All Devices".
      - Select the destination flash drive, then Erase.
      - Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
       
      Create install flash drive

      Open terminal and run this command:
      sudo /Applications/Install\ macOS\ .app/Contents/Resources/createinstallmedia --volume /Volumes/Install --nointeraction This will take about 30 minutes.
       


      Install bootloader

      Download the RehabMan's CloverEFI fork (used 4701) and install with this options on "Install macOS Mojave":
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - UEFI Drivers - ApfsDriverLoader-64
      - UEFI Drivers - AptioMemoryFix64


       
       
      Make things works

      Will be created a partition named EFI and mounted in Desktop.
      - Replace the /Volumes/EFI/CLOVER/config.plist with mine attached below
                    If you have modded BIOS with Advanced Menu and enabled 128MB DRAM-prealloc use 128MB_DRAM-prealloc_config.plist.zip
                    If no, then use 32MB_DRAM-prealloc_config.plist.zip
      - Put SSDT-L440.aml attached below in /Volumes/EFI/CLOVER/ACPI/patched/
       
      Generate your Serial, MLB and SmUUID
       
      - Open the replaced config.plist with Clover Configurator (used 5.3.2.0)
      - Go to SMBIOS, click few times in "Generate New" in Serial Number and SmUUID.
       
      Download those Kexts and put in /EFI/CLOVER/kexts/Other/
       
      - Download the FakeSMC.kext from here. I used the version 2018-0915.
      - Download the VoodooPS2Controller.kext from here. I used version 2018-1008.
      - Download the IntelMausiEthernet.kext from here. I used the version 2018-1031.
      - Download the Lilu.kext from here. I used the version 1.3.1.
      - Download the AppleALC.kext from here. I used the version 1.3.4.
      - Download the VoodooHDA from here. I used the version 2.9.1.
      - Download the WhateverGreen.kext from here. I used the version 1.2.6.
      - Download the AppleBacklightFixup.kext from here. I used the version 2018-1013.
      - Download the USBInjectAll.kext from here. I used the version 2018-1108.
      - Download the ACPIBatteryManager.kext from here. I used the version 2018-1005.
       
       
      Wifi and Bluetooth (DW1560 / BCM94352Z)
       
      Unfortunately, some notebook manufacturers are currently blocking the replacement of wireless cards. They want you to only use the models sold by them. And of course, none of them from Lenovo for this notebook model is compatible with MacOS.
       
      If you try to start with an unauthorized wifi card for them, you will receive a screen error:
      1802: Unauthorized network card is plugged in - Power off and remove the network card. Since this check is done directly in the BIOS, the only solution is to modify it.
      But since nothing is easy in this life, there is one small big problem:
      - The BIOS update procedure does not allow you to use modded files as it used to be.
      - You will need to physically reach your BIOS on the motherboard and make use of a USB BIOS reader/writer.
       
      So what you need to do:
      1. Disassembly your laptop;
      2. Dump your BIOS with an USB BIOS reader with SOIC8 clip (to not desolder from the motherboard);
      3. Patch it (In addition to removing the whitelist, add the advanced menu);
      4. Fix RSA signature;
      5. Reflash BIOS;
      6. Replace wireless card;
      7. Remount your laptop;
      8. Done.
       
      Soon, I'll provide step by step in this process. Probably until end of this week.
      In the meantime, if you need to, send me your dump that I do steps 3 and 4 for you.
      I also add the Advanced Menu so you can increase to 128MB the DRAM-prealloc.
       
      To fix a Modded BIOS to remove the 5 beeps on boot, you need this guide: https://www.insanelymac.com/forum/topic/337333-guide-fix-insyde-h2o-bios-signature-5-beeps-on-lenovo (traduzido: pt-BR)
       
       
      After replaced the wireless card. Download those Kexts and put in /EFI/CLOVER/kexts/Other/
       
      - Download the AirportBrcmFixup.kext from here. I used the version 1.1.9.
      - Download the BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext from here. I used the version 2018-0505.
      - Download the BT4LEContinuityFixup.kext from here. I used the version 1.1.2.
       
       
      Now you can start the instalation without problem (I guess).
       
       
      How install
       
      UEFI Setup Configuration and Installation

      UEFI configuration
       
      My BIOS is the latest: 1.93 (J4ET93WW) 

      - Shutdown and insert the flash drive.
      - Power on with F1 pressed to enter BIOS setup.
      - Change value: Config - Intel(R) AMT - Intel(R) AMT Control to DISABLED
      - Change value: Security - Security Chip to DISABLED
      - Change value: Security - Anti-Theft - Intel(R) AT Module Activation to DISABLED
      - Change value: Security - Anti-Theft - Computrace to DISABLED
      - Change value: Security - Secure Boot to DISABLED
      - Change value: Startup - UEFI/Legacy Boot to BOTH, Legacy First and CSM Support = Yes
      - Save & Exit Setup (F10)
       
      - Now, hold the F12
      - In the list, select your flash drive.
       
      The installer will start. 
      
      Format destination disk

      Format the disk with GUID partition mapping and name it "Macintosh".

      - Select Disk Utility in the list, then press Continue.
      - Click in View, then "Show All Devices".
      - Select the destination Disk, then Erase.
      - Name: HD, Format: APFS and Scheme: GUID Partition Map

      Close Disk Utility.
      
      Select "Install macOS", then Continue.
      Follow instructions in screen.

      After install

      After first part install the system will reboot. Maybe you have to press F12 again and select the flash drive.
      
      The second part of the installation will begin. This will take 16 minutes.
       

      Post installation

      Install bootloader
       
      When the second part of install finish, the system will reboot again.

      After performing the user initial setup and go to the desktop, you need to install Clover on internal disk.

      Open the Clover installer inside flash drive that you copied before.

      Use same options above but choose the system partition this time.

      Now you need to replace the config.plist inside your destination disk EFI parittion with config.plist inside flash card EFI partition.

      The flash drive EFI partition is unmounted. Mount with terminal "sudo diskutil mount /dev/rdiskXs1". To know what X is, use "diskutil list", most likely is 1.
       
      Last step
       
      Copy all Kexts from flash drive to /Library/Extensions, with those commands in Terminal:
      sudo cp -R /Volumes/EFI/EFI/CLOVER/kexts/Other/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i / Restart the system.
       
       
      It's done!
       
       
      Updates
       
      System update 10.14.3
       
      - Updated with success;
      - Everything works perfectly after reboot;
       

       
       

       
      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas, @Shiki and all others members involved directly or indirectly.
       
       
       
       
       
       
      32MB_DRAM-prealloc_config.plist.zip
      128MB_DRAM-prealloc_config.plist.zip
      SSDT-L440.aml
      VoodooHDA.kext.zip
      AppleHDADisabler.kext.zip
×