Jump to content
Kogen Mantis

Lenovo ThinkPad T420 with UEFI Only

4,604 posts in this topic

Recommended Posts

Don't have a real good fix - but I am pretty sure (based limited testing/run-time with alternatives) that it is VoodooPS2controller kexts causing problems with sleep - that is the blinking fast and keyboard/trackpad going away. if anyone has any thoughts on how to make VoodooPS2 behave, please share!

1) With Clover, I reverted to the set of PS2 kexts i was using in back in the 10.8.2 days, and the box ran ok - that is sleep/wake for the last day without issues. Of course, the ThinkpadUltraNav.kext is not as good as the one in VoodooPS2. but if sleep wake is important to you then this is a workaround. i asked RehabMan about Clover support, but he does have any experience etc.

2) With Chameleon - VoodooPS2 sleep/wakes fine with Chameleon. So this is an alternative is to boot via USB. but you have put back the kexts etc that is all the magic patching on kexts that Clover does.

In conjunction with this experiment, (I think) I learned how to inject a good EDID into the DSDT (whereas Clover was doing this as well). So no glitches with Clover or Chameleon boot.

EDID in dsdt:
 

            Device (IGPU)
            {
                Name (_ADR, 0x00020000)
// tjl-begin
// tjl - change VID to IGPU
// tjl - DualLink 1 for 1600x900
// tjl - EDID 1600x900 fix for glitch/hang
                Method (_DSM, 4, NotSerialized)
                {
                    Store (Package ()
                        {
                            "AAPL00,DualLink",
                            Buffer (0x04)
                            {
                                0x01, 0x00, 0x00, 0x00
                            },
                            "AAPL00,override-no-connect",
                            Buffer (0x80)
                            {
                                0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00,
                                0x30, 0xE4, 0xE2, 0x02, 0x00, 0x00, 0x00, 0x00,
                                0x00, 0x14, 0x01, 0x03, 0x80, 0x1F, 0x11, 0x78,
                                0x0A, 0x43, 0x45, 0x97, 0x59, 0x57, 0x8E, 0x28,
                                0x21, 0x50, 0x54, 0x00, 0x00, 0x00, 0x01, 0x01,
                                0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
                                0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x80, 0x25,
                                0x40, 0x80, 0x60, 0x84, 0x1A, 0x30, 0x30, 0x20,
                                0x35, 0x00, 0x36, 0xAE, 0x10, 0x00, 0x00, 0x19,
                                0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
                                0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
                                0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x4C,
                                0x47, 0x20, 0x44, 0x69, 0x73, 0x70, 0x6C, 0x61,
                                0x79, 0x0A, 0x20, 0x20, 0x00, 0x00, 0x00, 0xFE,
                                0x00, 0x4C, 0x50, 0x31, 0x34, 0x30, 0x57, 0x44,
                                0x32, 0x2D, 0x54, 0x4C, 0x42, 0x31, 0x00, 0x38
                            },
                            "hda-gfx",
                            Buffer (0x0A)
                            {
                                "onboard-1"
                            },
                            "model",
                            Buffer (0x17)
                            {
                                "Intel HD Graphics 3000"
                            },
                            "built-in", /*optional*/
                            Buffer (0x01)
                            {
                            0x00
                            },
                        }, Local0)
                    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                    Return (Local0)
                }

 

Share this post


Link to post
Share on other sites
Advertisement

@tluck, so if I used a dsdt with the edid info, would i still need to inject the edid info with clover? If not, could you upload a dsdt with the edid added?

Share this post


Link to post
Share on other sites

@honeywell - exactly!!! this dsdt works with clover or chameleon for 1600x900 LCD with glitch or hangs. let me know if it works you. frankly, i have been booting my GUID disk with chameleon on USB for the last 3 or 4 days - so i can use voodoops2controller without the sleep/wake issues.

not sure what is going on with the white screen. perhaps you could try not patching SNBGraphics?

Share this post


Link to post
Share on other sites

Hey tluck - I figured out why I got the white screen. My EDID is actually different from yours... lol. Anyway, I went into the DSDT to edit the EDID. Here is the dsdt.dsl - I am unable to compile it with DSDTSE I get this error:

Error    4096 -																		  ^ syntax error, unexpected PARSEOP_NAMESEG, expecting PARSEOP_DEFINITIONBLOCK

 

I was hoping you could compile it for me... Thanks. https://dl.dropboxusercontent.com/u/66566087/dsdt.dsl

Share this post


Link to post
Share on other sites

@honeywell - interesting!!! so i tried your EDID from the dsdt you posted (which i presume you just replace the EDID block with your EDID.) well that seems to remove glitches/hangs too. so perhaps its about having a EDID defined at this level (IGPU vs Display ) and not so much a particular EDID that works.

 

your model is a bit different than mine. Vendor 6af Product 203e (vs mine is 213e) - so it would be looking for a display settings in

 

/System/Library/Displays/Overrides/DisplayVendorID-6af/DisplayProductID-203e

 

i attached zip with your dsdt (source and compiled) and your display stuff

 

this is iasl compiler that i used to compile the dsdt.dsl

the Display Override file for your product id (203e - is decimal 8254)

honeywell.zip

 

 

post-954945-0-32247000-1370876347_thumb.png

Share this post


Link to post
Share on other sites

hi.. my name is Cristian.. i'm italian and install os 10.8.3 in ThinkPad T420 (4236-3P9)

 

42363P9

 

i7-2620M(2.7GHz), 8GB RAM, 160GB Solid State Drive, 14in 1600x900 LCD, NVIDIA N12P-NS1 1GB, CDRW/DVDRW, Intel 802.11agn wireless, WWAN option, Bluetooth, modem, 1Gb Ethernet, UltraNav, Secure Chip, Camera, 6c Li-Ion, Win7 Pro 32

 

 

the os work perfect, with fusion i install win7 (for my work), but i have problem with audio and Bluetooth ( wireless not work but is ok), i try to install all kext of this post but nothing...

any idea for me? or kext?

Share this post


Link to post
Share on other sites

@vision7 - 

 

bluetooth should work - but you may need to turn it on. you can change the kext so it picks up your model in

/System/Library/Extensions/IOBluetoothFamily.kext/Contents/PlugIns/BroadcomBluetoothHCIControllerUSBTransport.kext/Contents

edit Info.plist 

change 8532 to 8575 

 

the audio is looking for layout ID 12 - do you have that in your dsdt? also the AppleHDA modified for the T420 is expecting conexant 20590 codec id  as shown below

this is from HDEF device

 Device (HDEF)
            {
                Name (_ADR, 0x001B0000)
                Name (_S3D, 0x03)
                Name (RID, 0x00)
                Name (_PRW, Package (0x02)
                {
                    0x0D,
                    0x04
                })
                Method (_PSW, 1, NotSerialized)
                {
                    Noop
                }
                Method (_DSM, 4, NotSerialized)
                {
                    Store (Package (0x0A)
                        {
                            "codec-id",
                            Buffer (0x04)
                            {
                                0x6E, 0x50, 0xF1, 0x14
                            },
                            "layout-id",
                            Buffer (0x04)
                            {
                            // for 10.8.x use layout12
                                0x0C, 0x00, 0x00, 0x00
                            //  0x6E, 0x50, 0x00, 0x00
                            },
                            "PinConfigurations",
                            Buffer (Zero) {},
                            "hda-gfx",
                            Buffer (0x0A)
                            {
                                "onboard-1"
                            },
                            "device-type",
                            Buffer (0x11)
                            {
                                "Conexant CX20590"
                            }
                        }, Local0)
                    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                    Return (Local0)
                }
            }
        }


 

Share this post


Link to post
Share on other sites

Trying to attempt this on my T530, but running into problems when trying to boot off the USB with Clover - I'll get the initial boot menu, select the option to boot from the usb, and be prompted with the following screen:

 

install_zpsa04c8484.jpg

 

This is after attempting the "boot in safe mode" from the right click menu in Clover - previous attempts would lock up at the "root device uuid is..." prompt.

 

I've managed to get ML installed previously using the ##### method, but would much rather go the UEFI route with a clean install. I can boot into the previous ML installation with the Clover usb if I select the safe mode option, but otherwise it gets aways into loading drivers and then reboots.

 

Any suggestions?

Try again using my older custom package from post #117 and report back.

 

BTW: I guess I'll be switching from T420 to T430 soon. Right now I have both machines to decide witch one to sell. The T430 is a stronger model (i7) with optimus graphic card that I've always wanted to play with in OSX. To bad I still have very little time lately to do some serious hackintoshing, but I can report this about the new T430:

- I can boot successfully with older clover r1229 (I didn't had the time to investigate why Clover newer releases wont boot)

- USB3 works excellent OOB (booting from 32GB USB3 pen-driver - super fast)

- the NVIDIA NVS 5400M - works with graphic enabler (I have black screen with HD4000)

- too bad the whitelist bios can't be flashed to this device (no WiFI swapping for broadcome model) and I don't want to solder the eprom and flash it outside using phoenix flasher. - Can you guys suggest USB wifi that works OOB?

- T430 boots clover in full resolution (1600x900 and looks gorgeous) so I guess I'll update the ThinkPad theme background for high res in free time :)

Share this post


Link to post
Share on other sites

 

@vision7 - 

 

bluetooth should work - but you may need to turn it on. you can change the kext so it picks up your model in

/System/Library/Extensions/IOBluetoothFamily.kext/Contents/PlugIns/BroadcomBluetoothHCIControllerUSBTransport.kext/Contents

edit Info.plist 

change 8532 to 8575 

 

yes, i have turned on the switch.. 
i have tried to insert new 8575 but when i open the network in system preference i find a new ethernet but no a bluetooth...
 
this evening i try with the audio.. 

Share this post


Link to post
Share on other sites

@vision7 - 

osx does not support intel centrino wifi - so the internal wifi wont work. bluetooth should work as that is usually a separate broadcom device on 420s.

is your bluetooth light on - along the bottom of the LCD panel? does it show up in your "About This Mac" system report?


@kogen - for USB wifi, i have 2: Airlink101 and Asus N10. these 2 both use a RealTek chip (RTL8192S). got updated drivers from realtek's site.

Share this post


Link to post
Share on other sites

Hello!
 
I have same situation. I've got old T510 and new W530 and little stuck with W530 in case of nvidia gpu.
 
Boots fine with latest Clover without any trouble on both laptops. And even installed new 10.9 with clover with no problems)
 
About your T430 I have few suggestions:
 
1) Wi-Fi card can be replaced with AzureWare AW-NU706H it's in mPCIe form factor but instead of pci-e it use usb pins , based on USB chipset Ralink RT3070 which works fine in OSX with ralink drivers. Also some realtek usb cards may work well
 
2) HD4000 need's correct id injection, I think in T430 we've got same layout of outs on HD4000 and Nvidia NVS. HD4000 can only drive internal LCD, nvidia can drive LCD + all outs (VGA+DP+Dock outs)
In my case I use AAPL,ig-platform-id: 01660004, and HD4000 works fine with it
 

Method (_DSM, 4, NotSerialized)
                {
                    Store (Package (0x0E)
                        {
                            "AAPL,ig-platform-id",
                            Buffer (0x04)
                            {
                                0x04, 0x00, 0x66, 0x01
                            },
                            "device-id",
                            Buffer (0x04)
                            {
                                0x66, 0x01, 0x00, 0x00
                            },
                            "vendor-id",
                            Buffer (0x04)
                            {
                                0x86, 0x80, 0x00, 0x00
                            },
                            "subsystem-vendor-id",
                            Buffer (0x04)
                            {
                                0x6B, 0x10, 0x00, 0x00
                            },
                            "subsystem-id",
                            Buffer (0x04)
                            {
                                0xEA, 0x00, 0x00, 0x00
                            },
                            "revision-id",
                            Buffer (0x04)
                            {
                                0x09, 0x00, 0x00, 0x00
                            },
                            "hda-gfx",
                            Buffer (0x0A)
                            {
                                "onboard-1"
                            }
                        }, Local0)
                    DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
                    Return (Local0)
                }

 
 But I've also have some differences:

 

USB3 works ooh but only with usb 3.0 devices - my seagate flex hdd and transcend card reader works in usb 3.0 ports but usb 2.0 devices doesn't.

 

Also I can't boot fine from usb devices, boot stuck after some time on wait for root device...

 

*** W530 specific

 

My nvidia gpu doesn't boot to gui and stuck in console. It's kepler based on gk107 chip as GT 650m in my retina mac but it simple doesn't work. All tries with no luck 

 

 

BTW: I guess I'll be switching from T420 to T430 soon. Right now I have both machines to decide witch one to sell. The T430 is a stronger model (i7) with optimus graphic card that I've always wanted to play with in OSX. To bad I still have very little time lately to do some serious hackintoshing, but I can report this about the new T430:
- I can boot successfully with older clover r1229 (I didn't had the time to investigate why Clover newer releases wont boot)
- USB3 works excellent OOB (booting from 32GB USB3 pen-driver - super fast)
- the NVIDIA NVS 5400M - works with graphic enabler (I have black screen with HD4000)
- too bad the whitelist bios can't be flashed to this device (no WiFI swapping for broadcome model) and I don't want to solder the eprom and flash it outside using phoenix flasher. - Can you guys suggest USB wifi that works OOB?
- T430 boots clover in full resolution (1600x900 and looks gorgeous) so I guess I'll update the ThinkPad theme background for high res in free time :)

Share this post


Link to post
Share on other sites

@joshhh - Thanks for suggestions - I'll try to find some spare time and dig in a bit more into T430 + OSX. Please share your W530 kexts, dsdt and config.plist.

Ohh and You are right about the USB3 ports - I just didn't have time to put anything eles than my USB3 pen-drive. It seems that USB2 devices are not deferred to EHC controller thus no other driver takes over them. Use GenericUSBXHCI driver from this thread. - I wonder if we could fix it in DSDT?

Share this post


Link to post
Share on other sites

10.8.4 below

10.8.5 here

 

Updated 29-August-2013

 

Revised the attached zip file with...

  • Updated to Clover b1974
  • Updated ethernet driver AppleIntelE1000e.kext to v2.4.14
  • Updated to Rehabman's FakeSMC.kext + Sensors to v5.2.772
  • Updated to Rehabman's VoodooPS2Controller.kext to v1.8.6 
  • Replaced VoodooBattery.kext with Rehabman's AppleSmartBatteryManager.kext
  • Replaced v1.3.5 AppleACPIPlatform.kext with ErmaC's patched ML (v.1.7) version

Cuts boot time in half - the rotating thing only goes round and round about 5 times now vs 12+ !!!

Sleep/wake seems to work just as good as with the snow leopard ACPI kext ... note: the "moon" icon takes a little longer to light up!

 

Updated 31-July-2013

  • updated generic config.plist to remove boot args WithKexts NoCaches and added them in SystemParameters section
  • updated to Clover 1942

Updated 22-July-2013

  • Updated to Clover b1928 
  • Updated VoodooPS2Controller.kext to v1.8.5 (RehabMan version)
  • Updated FakeSMC.kext to v5.2.724 (RehabMan version with sensors - adding Plugins for ACPI and CPU only)
  • Streamlined DSDT
  • Slight mods to OEM config.plist ( not sure if it made a difference! for sleep ) 

Updated 19-June-2013 

  • Fixed OEM config.plist to inject the EDID (sorry i had removed for some testing  but forgot to put it back!)
  • Replaced OEM dsdt.aml with same EDID
  • Updated to Clover b1888
  • change generic config.plist to be more "generic" compared to OEM/<yourproduct>/config.plist

 

-------------------------------------

 

T420 users:

 

Attached is a current full /EFI pack for T420 on Clover and OSX 10.8.4

 

Notes:

there are 3 kext folders 

10.8 (which are good for vanilla boot) before using OEM folder and/or modified kexts are in place.

  • FakeSMC.kext v5.2.772 - core hack mechanism + plugins -  Follow link to download full package - so you can install HWMonitor.app etc (just select Plugins ACPI and CPU)
  • VoodooPS2Controller.kext v1.8.5 v1.8.6 - Keyboad/Trackpad -   Follow link to get full package and installation instructions to install daemon Note: may still be subject to random sleep/wake issues... versions 1.8.5+ are proving to be more reliable.
  • AppleIntelE1000e.kext v2.2.14 v2.4.14- gigE - goes in /System/Library/Extensions/IONetworkingFamily.kext/Contents/PlugIns

10.8-SLE which can be combined with above and will replace your /S/L/E versions.

  • IOAHCIBlockStorageInjector.kext -  makes DVD an internal device so iDVD player works.
  • AppleHDA.kext (patched 10.8.4)- for full audio support - note: requires matching DSDT sections using Conexant Codec and layoutID 12.
  • AppleACPIPlatform.kext (v1.7) - upgraded to ErmaC's Patched ML kext for sleep/wake + battery
  • AppleSmartBatteryManager (v1.33) VoodooBattery.kext - using Rehabman's kext configured for v3 ACPI per his instructions to show/track battery info on menu bar - requires rollback AppleACPIPlatform.kext

​10.8-Chameleon - extra patched kexts in /S/L/E for use with Chameleon 

  • AppleCPUPM, AppleRTC and AppleSNBGraphicsFB - are not really necessary to install/replace with clover since it does the patching. Install for Chameleon compatibility. 

 

The DSDT (in OEM) has some new mods in the IGPU are that seem to remove glitches/hangs on either Clover or Chameleon - go figure?! And there is generic dsdt for non-1600x900 users to try.

 

Basic instructions and notes:

  1. install vanilla 10.8.4 to GUID formated disk - use USB or other method
  2. install standard Clover b1888 b1928 b1942 b1974 into ESP - use link to download from sourceforge.
  3. replace /Volume/ESP/EFI with contents in zip
  4. boot up vanilla 10.8.4 with clover - this will use the kexts and "top" level config.plist
  5. now install kexts from ESP or zip to boot drive into /S/L/E (from /EFI/CLOVER/kexts/10.8 and 10.8-SLE) or use myhack method. see notes above
  6. here is the tricky part - fix OEM folder to match your system 
  7. DO NOT just hastily rename the folder OEM/4236AT9 to match your productID -  you may need to modify some things to make it compatible with your specific model details.  If you have a 2.5 Ghz CPU and 1600x900 LCD, you can probably just use items as is - that is rename 4236AT9 to match your product name. 

- the OEM/4236AT9/ACPI/patched/ssdt.aml is CPU specific - dont use unless you have i5-2520 (or similar)

- the OEM/4236AT9/config.plist is CPU and display specific. 

 

OTHERWISE, If you do NOT have 1600x900 LCD:

- replace OEM config.plist with config.no-edid.plist

- edit and change config.plist Graphics section - set DualLink to 0

- replace (move/rename) the generic-dsdt.aml file to  OEM/<4236AT9/ACPI/patched/dsdt.aml

 (this one does not have DualLink or EDID definitions)

 

If you do NOT have same speed/type CPU (i5 2520) then do these 3 things:

- remove ssdt.aml - may not work for your CPU 

- edit and change config.plist ACPI section - change generate P/C states to true - clover may do a good job for your CPU.

- edit and change config.plist CPU section - fix speeds (or remove CPU section) to match your CPU. 

T420-EFI-Clover-b1972.zip

Edited by tluck

Share this post


Link to post
Share on other sites

T420 users:

 

attached is a current full EFI pack for T420 on Clover v1858 and OSX 10.8.4

 

Notes:

there are 2 kext folders 

10.8 (which are good for vanilla boot) before using OEM folder and/or modified kexts are in place.

10.8-SLE which can be combined with above and will replace your SLE versions.

 

- VoodooPS2Controller seems still cause random sleep issues.

- AppleCPUPM, AppleRTC and AppleSNBGraphicsFB are not really necessary to install/replace as clover does the patching.

 

The DSDT (in OEM) has some new mods in the IGPU are that seem to remove glitches/hangs on either Clover or Chameleon - go figure?! And there is generic dsdt for non-1600x900 users to try.

everything is ok here with this new pack (generic dsdt is ok too)

thanks a lot

updated to 1888 ;)

Share this post


Link to post
Share on other sites

Today we had some fun with @k3nny about the OSX Mavericks icon in ThinkPad theme and we came up with this. (just in case you were wondering who is making the Mavericks)

 

post-112035-0-68830900-1371941487_thumb.jpg

 

I think this Mavericks icon will be the official 10.9 Developer Preview icon in ThinkPad theme :)

Here is the file: os_mav.icons.zip

Share this post


Link to post
Share on other sites

Hey guys... still frustrated with the graphics glitches in my 1600x900 T420 (HD3000 only). Injected EDID with the DSDT, still no changes. Anyone know what I can do to understand what is causing the problem and fix it? Using tluck's pack and using my own EDID in the DSDT.

Share this post


Link to post
Share on other sites

Could you please upload this(T420-EFI-CLOVER-b1888.zip ) as pkg? I can't boot when I create my own 

Share this post


Link to post
Share on other sites

@dnr

 

- i suggest you first install with the standard clover installer (pkg) then you can replace the /EFI/CLOVER layers+items in stages.

- the generic config.plist + kexts should be able to boot up - not all things will work but it should be good to get running.

- the OEM directory name needs to match your product ID and then further you may need to modify config.plist to adjust speeds to match your CPU.

this then has the custom DSDT to get the rest of things working (as they did on chameleon)

Share this post


Link to post
Share on other sites

I tried to install with standrd clover installer, I can boot up.

Then I replaced /EFI/CLOVER folder on EFI partition, and I can't boot.

 

P.S: I also changed product id in EFI/CLOVER/OEM/ folder to my product ID: 4236W63

Share this post


Link to post
Share on other sites

@dnr - 

 

where does it get stuck? using that OEM folder presumes you moved all the kexts from /EFI/CLOVER/kexts to your system in /S/L/E. just checking.


@honeywell

 

when I  Kogen's EDID - i get rid 99.99% glitches and hangs. but besides EDID, i did upgrade to BIOS 1.44 and i shut off VT-d virtualization. even when using my old dsdt .... tried to recreat the problem but now i barely get glitches or hangs, compared to what i used to get (had to use quartz debug to turn off 2d acell  it was so painful). 

Share this post


Link to post
Share on other sites

@tluck

 

I forgot to put kexts to /S/L/E, now I done this with "kext drop" and can boot up. Thank you for you help!

 

@honeywell

 

in ThinkPad bios:
Security > Intel ® VT-d Feature [Disabled]
 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By fusion71au
      Clover r4961 ISO compiled with GCC and minimal config.plist compatible for use in VMWare Workstation.
       
      Tested with unlocked Workstation 15 running OSX 10.9 -->10.14 guest in Windows X64 host.
       
      Installation
      1. Download and unzip "EFI_Clover_r4961 for VMware.zip". Mount Clover-v2.4k-4961-X64.iso by double clicking on it.
      2. Mount your VM's EFI System Partition eg in terminal
      sudo diskutil mount disk0s1   3. Copy EFI folder from step 1 into the EFI partition
      4. Shutdown the VM, add bios.bootDelay = "3000" to your VM's vmx file
      5. Reboot your VM, press <F2> to access the VMware Boot Manager and add CLOVERX64.efi to the boot menu.
       
      Substitute your own unique and valid MLB and ROM variables in the /EFI/CLOVER/config.plist (Rt Variables section) to activate iMessage/Facetime on your VM.
    • By ludufre
      Installing macOS Mojave on Lenovo ThinkPad L440

       
      There are two version of this laptop:
      - 20AS = Chipset QM87, without Express Card (mine).
      - 20AT = Chipset HM86, with Express Card.
      I strong believe is the same thing...
       

      Changelog:
       
      06/09/2019 14:16h GMT-0
      - Added missing parts in the post-install step. 
       
      06/04/2019 17:19h GMT-0
      - Updated Clover link. 
       
      06/02/2019 18:08h GMT-0
      - Added info about update 10.14.5. 
       
      03/13/2019 13:15h GMT-0
      - Updated info about touchpad replacement and CPU and 4G LTE modem.
       
      02/05/2019 18:47h GMT-0
      - Updated info about CPU replacement and 4G LTE modem.
       
      02/04/2019 15:24h GMT-0
      - Sometimes the VoodooHDA.kext doesn't work.
      - Added AppleHDADisabler.kext to fix that (attached bellow).
       
      01/24/2019 14:42h GMT-0
      - Added more adjustments to use of VoodooHDA.
      - Updated VoodooHDA links to 2.9.1 official (without installer).
      - Changed PCM volume from 90 to 180 in Info.plist (attached modified VoodooHDA.kext bellow)
      - Updated SSDT-L440.aml (Removed HDEF and HDAU, not needed).
      - Updated config.plist (Changed to user Audio layout to 1).
       
      01/22/2019 20:47h GMT-0
      - I gave up on the AppleALC.
      - Headset does not work.
      - Now with VoodooHDA is perfect and the sound even louder.
       
      01/22/2019 14:37h GMT-0
      - Added info about update 10.14.3. 
       
      01/22/2019 13:46h GMT-0
      - Added link to BIOS reassing guide.
       
      01/20/2019 11:49h GMT-0
      - First version.
       
      What works and what does not
       
      - Processor: Intel Core i5-4300M ->  Work. All SpeedStep stages.
      - Video Card: Intel HD4600 ->  Work. QE/CI and Metal.
      - Chipset: Intel QM87 ->  Work.
      - Mini DisplayPort ->  Work. But no audio, yet.
      - VGA ->  Not work. Normal.
      - Audio: ALC292 ->  Work.
      - WiFi/Bluetooth: Intel AC 7260 ->  Not work. Replaced with DW1560 (need whitelist removal).
      - Ethernet: Intel I217-LM ->  Work.
      - Card Reader: Realtek RTS5227 ->  Not work.
      - Keyboard and Touchpad ->  Work.
      - Webcam ->  Work.
      - Fingerprint Reader ->  Not work. Normal.
      - USB3.0 ->  Work.
      - Sleep ->  Work.
      - Airdrop, Handoff, Instant Hotspot and Continuity ->  Work after replaced wireless.
       
       
      Extras
       
      - FullHD 1920x1080 display upgrade: 
      Replaced with AU Optronics B140HAN01.1 30pin eDP (B140HAN01.2 and B140HAN01.3 also compatible).
      Apparently same screen as Dell Latitude E6440, E7440, Lenovo Ideapad U430 and E129.
       
      - CPU upgrade:
      Replaced the stock Intel Core i5 4300M 2.6Ghz (3.3Ghz turbo) 6M cache with Intel Core i7 4700MQ 2.4Ghz (3.4Ghz turbo) 6MB.
      I initially had problems with overheating. The processor ran at full load above 90 degrees.
      After using a quality thermal paste I can work between 70 and 80 degrees.
      Acceptable taking into consideration that the new processor has 47TDP versus 37TDP which is recommended.
      I also had no problem consuming the battery while charging. The original 65W source seems to have figured out.
       
      - Touchpad upgrade:
      Replaced the stock with T460 touchpad.
      This is serious: you have to do it! It should be stock. Touchpad with precision and absurd quality!
      Just do it!
       
      - RAM upgrade:
      No mistery here. Just upgade.
       
       
      Todo
       
      - Make DP audio work.
      - Make Card Reader work.
      - Upgrade CPU to i7-4712MQ (Ordered. It's on the way) Done, but received i7-4700MQ (47w TDP, with good paste I have no overheating)
      - Replace touchpad with T460 model (Ordered. It's on the way) Done. Sensitivity and perception of quality much better. I recommend 100%!
      - Sierra Gobi5000 4G LTE modem EM7355 (Ordered. It's on the way. I hope works. ) Done, but not work. Recognize but not connect. I already gave up...
      - Upgrade to 16GB RAM Done
      - Make trackpad appear in System Preferences
       
       
      What you need to install

      - Running install of macOS
      - One USB flash drive of 8GB or bigger
      - macOS Mojave install app
      - Clover EFI
      - Clover Configurator
      - Some KEXTs and SSDT patches


      How create create the install flash drive
       
      Prepare install flash drive

      Format the flash drive with GUID partition mapping and name it "Install".

      - Open Disk Utility.
      - Click in View, then "Show All Devices".
      - Select the destination flash drive, then Erase.
      - Name: Install, Format: Mac OS Extended (Journaled) and Scheme: GUID Partition Map
       
      Create install flash drive

      Open terminal and run this command:
      sudo /Applications/Install\ macOS\ Mojave.app/Contents/Resources/createinstallmedia --volume /Volumes/Install --nointeraction This will take about 30 minutes.
       


      Install bootloader

      Download the CloverEFI from SourceForge (used 4934) and install with this options on "Install macOS Mojave":
       
      - Install for UEFI booting only
      - Install Clover in the ESP
      - UEFI Drivers - ApfsDriverLoader-64
      - UEFI Drivers - AptioMemoryFix-64


       
       
      Make things works

      Will be created a partition named EFI and mounted in Desktop.
      - Replace the /Volumes/EFI/CLOVER/config.plist with mine attached below
                    If you have modded BIOS with Advanced Menu and enabled 128MB DRAM-prealloc use 128MB_DRAM-prealloc_config.plist.zip
                    If no, then use 32MB_DRAM-prealloc_config.plist.zip
      - Put SSDT-L440.aml attached below in /Volumes/EFI/CLOVER/ACPI/patched/
       
      Generate your Serial, MLB and SmUUID
       
      - Open the replaced config.plist with Clover Configurator (used 5.3.2.0)
      - Go to SMBIOS, click few times in "Generate New" in Serial Number and SmUUID.
       
      Download those Kexts and put in /EFI/CLOVER/kexts/Other/
       
      - Download the HWSensors 3 from here. I used the FakeSMC.kext, ACPIMonitor.kext and IntelCPUMonitor.kext inside of DMG version r196.
      - Download the VoodooPS2Controller.kext from here. I used version 2018-1008.
      - Download the IntelMausiEthernet.kext from here. I used the version 2018-1031.
      - Download the Lilu.kext from here. I used the version 1.3.6.
      - Download the VoodooHDA from here. I used the version 2.9.1 and patched the sound volume (attached below).
      - Download the WhateverGreen.kext from here. I used the version 1.2.9.
      - Download the AppleBacklightFixup.kext from here. I used the version 2018-1013.
      - Download the USBInjectAll.kext from here. I used the version 2018-1108.
      - Download the ACPIBatteryManager.kext from here. I used the version 2018-1005.
       
      - Download the VirtualSMC.kext from here. I used version 1.0.2. Replaced with FakeSMC of the HWSensors 3 r196 package.
      - Download the FakeSMC.kext from here. I used the version 2018-0915. Replaced with VirtualSMC.kext due 10.14.4 issues on update.
      - Download the AppleALC.kext from here. I used the version 1.3.4. Replaced with VoodooHDA.kext due mic not working.
       
       
      Wifi and Bluetooth (DW1560 / BCM94352Z)
       
      Unfortunately, some notebook manufacturers are currently blocking the replacement of wireless cards. They want you to only use the models sold by them. And of course, none of them from Lenovo for this notebook model is compatible with MacOS.
       
      If you try to start with an unauthorized wifi card for them, you will receive a screen error:
      1802: Unauthorized network card is plugged in - Power off and remove the network card. Since this check is done directly in the BIOS, the only solution is to modify it.
      But since nothing is easy in this life, there is one small big problem:
      - The BIOS update procedure does not allow you to use modded files as it used to be.
      - You will need to physically reach your BIOS on the motherboard and make use of a USB BIOS reader/writer.
       
      So what you need to do:
      1. Disassembly your laptop;
      2. Dump your BIOS with an USB BIOS reader with SOIC8 clip (to not desolder from the motherboard);
      3. Patch it (In addition to removing the whitelist, add the advanced menu);
      4. Fix RSA signature;
      5. Reflash BIOS;
      6. Replace wireless card;
      7. Remount your laptop;
      8. Done.
       
      Soon, I'll provide step by step in this process. Probably until end of this week.
      In the meantime, if you need to, send me your dump that I do steps 3 and 4 for you.
      I also add the Advanced Menu so you can increase to 128MB the DRAM-prealloc.
       
      To fix a Modded BIOS to remove the 5 beeps on boot, you need this guide: https://www.insanelymac.com/forum/topic/337333-guide-fix-insyde-h2o-bios-signature-5-beeps-on-lenovo (traduzido: pt-BR)
       
       
      After replaced the wireless card. Download those Kexts and put in /EFI/CLOVER/kexts/Other/
       
      - Download the AirportBrcmFixup.kext from here. I used the version 2.0.0.
      - Download the BrcmFirmwareRepo.kext and BrcmPatchRAM2.kext from here. I used the version 2018-0505.
      - Download the BT4LEContinuityFixup.kext from here. I used the version 1.1.2.
       
       
      Now you can start the instalation without problem (I guess).
       
       
      How install
       
      UEFI Setup Configuration and Installation

      UEFI configuration
       
      My BIOS is the latest: 1.93 (J4ET93WW) 

      - Shutdown and insert the flash drive.
      - Power on with F1 pressed to enter BIOS setup.
      - Change value: Config - Intel(R) AMT - Intel(R) AMT Control to DISABLED
      - Change value: Security - Security Chip to DISABLED
      - Change value: Security - Anti-Theft - Intel(R) AT Module Activation to DISABLED
      - Change value: Security - Anti-Theft - Computrace to DISABLED
      - Change value: Security - Secure Boot to DISABLED
      - Change value: Startup - UEFI/Legacy Boot to BOTH, Legacy First and CSM Support = Yes
      - Save & Exit Setup (F10)
       
      - Now, hold the F12
      - In the list, select your flash drive.
       
      The installer will start. 
      
      Format destination disk

      Format the disk with GUID partition mapping and name it "Macintosh".

      - Select Disk Utility in the list, then press Continue.
      - Click in View, then "Show All Devices".
      - Select the destination Disk, then Erase.
      - Name: HD, Format: APFS and Scheme: GUID Partition Map

      Close Disk Utility.
      
      Select "Install macOS", then Continue.
      Follow instructions in screen.

      After install

      After first part install the system will reboot. Maybe you have to press F12 again and select the flash drive.
      
      The second part of the installation will begin. This will take 16 minutes.
       

      Post installation

      Install bootloader
       
      When the second part of install finish, the system will reboot again.

      After performing the user initial setup and go to the desktop, you need to install Clover on internal disk.

      Open the Clover installer inside flash drive that you copied before.

      Use same options above but choose the system partition this time.

      Now you need to replace the EFI folder inside your destination disk EFI parittion, with EFI folder inside flash card EFI partition.

      If the flash drive EFI partition of your destination disk or flash drive is unmounted:
      Mount with terminal "sudo diskutil mount /dev/rdiskXs1". To know what X is, use "diskutil list", most likely is 0 for destination disk and 1 for flash drive.
       
      Then, eject the flash drive.
       
      Last step
       
      Move all Kexts from EFI partition to /Library/Extensions, with those commands in Terminal:
      sudo mv -R /Volumes/EFI/EFI/CLOVER/kexts/Other/* /Library/Extensions/ sudo chmod -R 755 /Library/Extensions sudo chown -R root:wheel /Library/Extensions sudo kextcache -i / Restart the system.
       
       
      It's done!
       
       
      Updates
       
      System update 10.14.3
       
      - Updated with success;
      - Everything works perfectly after reboot;
       

       
       
      System update 10.14.4
       
      - Updated Clover to 4910.
      - Updated Lilu.kext to 1.3.5 and WhateverGreen to 1.2.7.
      - After first reboot the update progress stoped with:
      GTrace synchronization point 4 Unsupported CPU Unsupported PCH hmm.. mismatch sizes: 3100 vs 20 It was still possible to start the previous installation, selecting "Macintosh" as opposed to "macOS Install" in Clover.
      So I created a flash drive with Clover 4910 and put only my config.xml, SSDT-L440.aml, the updated Lilu.kext and WhateverGreen.kext. And I decided to test VirtualSMC instead of FakeSMC.kext.
      With this I was able to install update 10.14.4. After installation I can boot normally, even with FakeSMC.kext that already in /Library/Extensions.
      I do not know what exactly happened, but now works everything like was previously.
       


       
       
      System update 10.14.5
       
      - Updated Clover to 4934.
      - Updated Lilu.kext to 1.3.6 and WhateverGreen to 1.2.9.
      - After first reboot the update progress stoped again (like 10.14.4 update) with:
      GTrace synchronization point 4 Unsupported CPU Unsupported PCH hmm.. mismatch sizes: 3100 vs 20 It was still possible to start the previous installation, selecting "Macintosh" as opposed to "macOS Install" in Clover.
      I decided to rollback to FakeSMC.kext but this time with the version of HWSensors 3. Link above.
      With this I was able to install update 10.14.5. After installation I can boot normally.
       

       
       

      And last but not least
       
      I would like to thank the following community members, by making these dream possible:
      @crushers, @snatch, @apianti, @blackosx, @blusseau, @dmazar, @slice2009, @autumnrain, @phpdev32, @EMlyDinEsH, @RehabMan, @Scellow, @mitch_de, @Shailua, @Andy Vandijck, @maxfierke, @ArturXXX, @LexHimself, @brumas, @Shiki and all others members involved directly or indirectly.
       
       
       
       
       
       
      32MB_DRAM-prealloc_config.plist.zip
      128MB_DRAM-prealloc_config.plist.zip
      SSDT-L440.aml
      VoodooHDA.kext.zip
      AppleHDADisabler.kext.zip
    • By gengik84
      Ciro82==>>Thanks
      Uno dei tre Requisiti:
      Hack funzionante Mac vero Macchina virtuale Impostazioni Bios per il boot:
      Cercate una voce  del tipo “Sata Mode”e settatela  in AHCI
      Secure Boot: disabilitare o altri sistemi operativi
      CSM: UEFI o LEGACY, oppure a secondo del tipo di installazione
      VT-x / VT-d disable
      *Nota: Secure boot e csm valido solo per bios UEFI
      Materiale Occorrente 
      "OS X (Versione App.Store)”
      USB 8GB  *nota: nel caso di usb superiori dovrà essere partizionata, in modo da avere una partizione su cui "lavoreremo,di questa dimensione
      ShowAllfiles 
      kext Wizard 
      Bootloader Clover_2.3k_r xxx:                   http: //sourceforge.n.../cloverefiboot/
      Clover Configurator:                                    http: //mackie100proj...a.org/download/
      FakeSmc.kext:                                            https://github.com/kozlek/HWSensors/releases
      In allegato,a fondo pagina troverete un "pacchetto" contenente : ShowAllfiles, Kext Wizard, FakeSmc.kext: 
      App alternative:
      ESP Mounter Pro: per montare la partizione EFI
      Vi illustrerò tre metodi per creare la usb, ma sono ben distinti… quindi usatene soltanto uno
      Metodo 1: “Install Mac_OS_X.command” Metodo 2: “Create Install Media di Apple” Metodo 3:  Metodo Manuale Alla fine delle preparazione dell’installer, tutti i metodi necessitano l’installazione del Bootloader Clover sulla a vostra USB.
      “CONDIZIONI OBBLIGATORIE”
      PUNTO 1: che la vostra usb sia stata preventivamente nominata USB (caratteri maiuscoli) Tabella di partizione GUID e la formattazione in  Mac esteso Journaled.
      PUNTO 2: che l’installer di OSX si trovi in Applicazioni
      Utility Disco 
      Selezionate la pendrive, andate su “partizione”, selezionate “1 partizione”, impostate Mac OS esteso journaled e date il nome USB, poi in basso cliccate su opzioni e scegliete Tabella partizione (GUID), poi “applica”.
      Immagine 
      Riporto nuovamente l’operazione sopra citata adoperando dal nuovo Utility Disco introdotto su El Capitan.
      Rimane ovviamente invariato nome della usb in ==>> USB (maiuscolo), la formattazione in Mac esteso Journaled e sia la mappa partizione in GUID
      Da utility disco selezionate la usb, cliccate su inizializza.
      dal menù a tendina scegliete la relative impostazioni
      Immagine  
      Procedura effettua da High Sierra è la stessa della precedente, l'unica attenzione e operazione da aggiungere in primis  è cliccare nel menù a tendina in alto sulla sinistra di utility disco e selezionare "mostra tutti i dispositivi"
      Immagine 
       
      =====================
        METODO 1: "Install_Mac_OS_X.Command" Lo script che trovate allegato in fondo alla guida permette la creazione dell’installer in maniera automatica
      Include la possibilità di scelta di tre versioni di osx
      Yosemite El Capitan Sierra Il risultato finale è come quello del metodo "manuale" descritto nella guida, per cui l'installazione avverrà in un solo passaggio, non in due come con il metodo createinstallmedia. 
      Offre inoltre la possibilità di inserire un kernel patchato, utile, per esempio, per chi usa AMD.
      Rimane invariato il nome dato alla usb in USB, mappa partizione e tipo di formattazione
      Se la vostra usb non sarà rinominata nel modo corretto, verrete avvisati dal terminale, quindi non dovrete far altro che apportare la relativa modifica e rilanciare nuovamente lo script
      Esempio
      ===========================
      Metodo 2 
      L'intento è quello di usare la procedura fornitaci direttamente da Apple, "createinstallmedia", introdotta  con Mavericks. 
      Tale metodo prevede l’uso del terminale che via via se ne sta perdendo il “valore e l’uso”
      Inizialmente per i neofiti potrà sembrare problematico ma alla fine non è così.
      Durante il post installazione alcune operazioni ne richiedono l’ uso.
      Perciò mi sono chiesto perchè, qualora uno volesse, non far conoscere da subito un po’ questo “strumento”???
      Per favorirvi vi ho allegato i comandi già  “pronti”, i quali li potrete copiare ed incollare sul terminale.
      A questo punto aprite il terminale, copiate ed incollate il comando sottostante e premete invio, digitate la vostra password e premete nuovamente invio.
      Comando per creare USB con Yosemite:
      sudo /Applications/Install\ OS\ X\ Yosemite.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ OS\ X\ Yosemite.app --nointeraction  
      Comando per creare USB con El Capitan
      sudo /Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ OS\ X\ El\ Capitan.app --nointeraction Comando per creare USB con Sierra 
      sudo /Applications/Install\ macOS\ Sierra.app/Contents/Resources/createinstallmedia --volume /Volumes/USB --applicationpath /Applications/Install\ macOS\ Sierra.app/ --nointeraction Per creare USB con Hight Sierra o Mojave usate --> C_I_M (aggiornato per 10.14)
       
      Funziona con il drag & drop sul terminale, in questo caso non vi è necessità che la usb sia nominata in un determinato modo ed essendo basato su create install media ovviamente funziona da 10.9 a 10.14.... 
      BENE…IL PROCESSO DI CREAZIONE E’ INIZIATO…
      AVREMO CIRCA 20/30 MINUTI DI TEMPO LIBERO A CUI DEDICARSI A CIO’ CHE VOGLIAMO………………………………………..  
      COLGO L’OCCASIONE PER FARVI NOTARE LA VELOCITA’ E LA SICUREZZA DI QUESTO METODO
      CONFRONTATE QUESTO CON IL TERZO METODO E NOTERETE CHE CON UN SOLO PASSAGGIO, OSSIA IL COMANDO DATO AL TERMINALE, FACCIAMO IN UNA SINGOLA OPERAZIONE TUTTI I VARI STEP DESCRITTI SULL’ ALTRO METODO.
      DETTO QUESTO, MOLTO IMPORTANTE E’ SOTTOLINEARE CHE COSI’ FACENDO EVITEREMO ERRORI  DI DISTRAZIONE RIGUARDO AI PASSAGGI O FRAINTENDIMENTI.
      Immagine 
      Potete adesso passare ad installare il bootloader Clover sulla vostra usb.
      *NOTA*:
      Avendo usato questo metodo l'installazione si dividerà in due fasi, perciò dopo il primo riavvio e necessario far partire nuovamente l'installer, selezionare lo stesso disco senza formattarlo.
      Finita questa ulteriore fase , l'installazione sarà terminata
      =========================
      METODO "MANUALE"....  (lascio per futura memoria-Compatibile fino a 10.12)
      ==========================
      Bootloader
      **Nota:** Installazione in UEFI  dipenderà dalla scheda madre in vostro possesso, quindi se non supporta tale opzione , il bootloader dovrà essere installato in  modalità Legacy.
       Vi invito, qualora non sapeste questa informazione, a recarvi nel sito ufficiale del produttore e controllare le informazioni a riguardo
      Fatto questo dobbiamo installare  Clover sulla usb.
      A seconda del tipo di Bios o al tipo di installazione che vogliamo fare UEFI o Legacy avremo ovviamente configurazioni diverse in questa fase.
      Lanciate il pkg.
      Immagine 

       
      Cambiate la destinazione di installazione ad USB oppure Install Mac_OS_X (a secondo del tipo di creazione eseguita)
      Successivamente clicchiamo su "Ad Hoc"
      Per Installazione UEFI
      Mettete i flag   : Installazione solo per avvio UEFI
                               : installare Clover nella ESP
                               : Driver64UEFI  AptioMemory --> (consigliato) 
                               : Driver64UEFI  ApfsDriverLoader --> (consigliato) --> sostituisce l'uso del driver apfs.efi
                               : Selezionate l'altri driver come da successiva immagine,
       
      *Nota: Altri driver che si possono usare  al suo posto  sono:
       informazioni 
       
      Proseguite con l’installazione.
      Immagine 
      ** Ricordate che avrete accesso a questa cartella dopo aver montato la partizione EFI**
      ===========================
      Per installazione Legacy
      Immagine 
      ===========================
      Impostazione per config.plist:
      Con clover configurator “montate” la partizione EFI della usb.
      1) Per fare questo nel menù di sinistra, cliccate su “Mount EFI”
      2) individuate la partizione relativa alla vostra usb, a questo punto montiamo la relativa partizione EFI  selezionando l’apposito pulsante “Mount Partition”
      Immagine 
      3) Successivamente cliccate su “Open Partition”.. recatevi in EFI/Clover ed aprite il config.plist
      4) Sezione ACPI: Disabilitate tutti i fix sia del menù 1 che del menù 2
      Immagine 
      5) Sezione BOOT: Sole se si sta installando Yosemite mettete il flag su kext-dev-mode=1
      Immagine 
      6) Sezione RT Variables: Se si sta installando El Capitan oppure Sierra, aggiungere i valori: BooterConfig= 0x28, CsrActiveConfig= 0x67
      Immagine 
      7) Sezione System Parameters: Su inject kext mettete YES
      Immagine 
      ===========================
      Nota: Su El Capitan, è stato introdotto SIP (System Integrity Protection)
      Info:
      ===========================
      Recatevi in EFI/Clover/kext/10.x 
      X= alla versione di osx che state installando. Per esempio se installerete Yosemite dovrete recarvi nella cartella 10.10, con El Capitan in 10.11….ecc
      Se non ci fosse tale cartella, createla e nominatela voi a “modo”.
      Copiatevi all’interno FakeSmc.kext
      *Nota se venite già da altre vostre configurazioni, oltre kext sopra citato ,potete mettere gli altri necessari per il vostro hardware
      Stessa cosa se avete DSDT e/o SSDT potete copiarli in EFI/Clover/Acpi/Patched
      Immagine 
      
      Per High Sierra:
      Scaricare il driver apfs.efi a fine guida, collocarlo:
          --> EFI/clover/Driver64UEFI se stiamo usando UEFI
      --> EFI/Clover/Driver64 se stiamo usando Legacy
       
      Per chi volesse continuare ad usare HFS vi rimando a questo post:
        Come installare High Sierra in HFS direttamente dalla usb  
      Utenti Laptop:  Nel 99% è obbligatorio disattivare la grafica discreta Nvidia/Amd per installare questo nuovo osx
                                     Quindi aggiungete --> SSDT-Disable_DGPU.aml.zip
                                     in EFI/Clover/acpi/Patched della usb
      --------------------------------------------------------------------
      Per Mojave:
      Scaricare il driver apfs.efi per 10.14 a fine guida, collocarlo:
          --> EFI/clover/Driver64UEFI se stiamo usando UEFI
      --> EFI/Clover/Driver64 se stiamo usando Legacy
      Versione di clover non antecedente a V_4015
      Volete usare HFS?
      E' possibile fare un installazione diretta su altro disco o partizione, nel caso può essere usato anche per effettuare aggiornamenti...
      nel caso guardate...
       Mojave in HFS 
       Oppure direttamente da usb  
       
      Fatto questo avrete la vostra USB bootable per installare OSX.
      ………Non scordatevi Fakesmc.kext da mettere nella relativa cartella…. senza il quale non farete mai il Boot......
      *NOTA: se usato il terminale per la creazione della usb, l'installazione si dividerà in due fasi, perciò dopo il primo riavvio e necessario far partire nuovamente l'installer, selezionare lo stesso disco senza formattarlo.
      Finita questa ulteriore fase , l'installazione sarà terminata
      **NOTA** Se avete processori Broadwell,Skylake o Kabylake...usate FakeSmc.kext e relativi sensors che trovate all'interno del secondo pacchetto.. (potete usarlo anche sui precedenti senza problemi, essendo una versione più aggiornata ha ulteriore supporto per le cpu più recenti)
      Update: Fakesmc e sensors versione 6.26
      Post installazione... post #2           
       Buon Hack….. 
      Aggiornamento:Install_Mac_OS_X.command.zip (compatibile da 10.10 a 10.12)
      le info le trovate a questo post
      Ringrazio @Ciro82 che mi ha aiutato nel preparare questa guida.
      Pacchetto.zip
      Pacchetto-2.zip
      Pacchetto-Fake+Sensors 6.26.1440.zip
      C_I_M.zip
       
      apfs.efi-10.14-beta1_No_Log.zip





       

×