Jump to content
  1. joe75

    joe75

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By Dolamarv
      Hi all, I have been using an x240 thinkpad for more than 2 months as hackintosh and it is very stable. As of now I am in Catalina 10.15.1 and it’s running great until I updated it to the new clover build r5100. My laptop won’t automatically sleep when I close the lid down now. I reverted back to 5099 and close-lid automatic sleep works. I don’t know what caused the problem but I think 5100 fixed a dsdt patching of some sort that that conflicted with my config plist? Thanks in advance!
    • By FreqFeeder
      Hi there!
      I'm a newbie to the concept of installing a Mac OS on alternative hardware. Please bear with me
      I have a Lenovo Thinkpad x250 with 5th generation i7-5600U CPU, 16GB RAM, and Intel HD Graphics 5500. (I'd be glad to add any additional hardware details if needed)
      My goal is to have a dual boot machine - Mojave and Win 10. I have two separated physical drives.
      I've tried different methods, but none was stable to be operable.
      If anyone of you has the experience with this specific model it will be really great to hear your opinion.

      Thanks!
    • By zkingtut
      Hello Everyone ,,
       
      I'd  like to share with you my experience with Lenovo ThinkPad P50 ( EFI , and Installation Process with some tips ) Hopefully to be useful for anyone who own Lenovo ThinkPad P50 
       
      Before start I want to show you my device specs , and I'm  sure 99% this will work too with any P50 have different spec. specially Intel i7 CPUs:
       
      - Intel Xeon E-3 1535 v5 ( P530 Intel HD Graphics )
      - 32 GB RAM
      - 256 GB SK Hynix Nvme SSD pc401 hfs256gd9tng-62a0a - for Mac OS  ( be careful not all nvme ssd are compatible)
      - 256 GB Samsung Evo 850 SSD - for Windows 
      - 4K Screen 
      - Nvidia Quadro M2000M 4 GB ( Useless - Disabled )
      - Intel WiFi Card ( Should be change to a compatible Broadcom one )
       
      BIOS SETUP :
       
      I highly recommend this steps before going to BIOS SETUP according to my experience with this Laptop :
       
            *( Update your BIOS Firmware to the latest one using windows )
       
            *( Remove Battery , Open the back cover and unplug the small CMOS BATTERY for about  4~5 minutes and put everything back again )
       
             * ( Remove any SSD HDD Nvme disks , USB , DisplayPort , Dock .. etc during installation, keep only the target Disk )
       
      -------------------------------------------
      Now Power your PC and Press F1 to enter the BIOS SETUP
       
         - Reset BIOS to its defaults
         - Adjust Date and Time 
         - Config ----> Network ---> Wake Up on Lan ( AC Only )
                                                         Network Stack ( Disabled )
       
        - USB ----> USB UEFI support  ( Enabled)
       
        - Display ------> Total Graphic Memory (256 MB)
                                     Graphic Device ( Hybrid)
       
        - RAID -----> Disabled
       
        - Security -----> Security Chip Selection ( Discrete TPM )
                                     Secure BOOT ( Disabled )
                                     Intel SGX Control ( Software Control )
       
        - Start Up ------>BOOT Priority order ( USB HDD - Mac OS Disk - Windows - and so on ....... with this order )
                                     UEFI/Legacy ( UEFI Only )
                                     CSM Support  ( NO )
      ----------------------------------------------------------------------------------------------------------------------------------
       
      **   F1 to Enter Bios - F12 for Boot Menu
      ***   Delete the EFI Folder in your Installation USB and replace it with the Attached one 
      ****   Generate new serial for SMBIOS MacBook Pro 13.1
      *****    If your CPU is XEON then go to Config.plist CPU Section and Add 0x05A5 under Type ( Fix for Unknown CPU )
      ****** You can delete boot-args "brcmfx=1 & brcmfx-driver=#a" if you want , I used it in my case with 1820A card to fix wifi issue
      ******    After you successfully installed OS , now Copy the same EFI Folder to your main EFI Boot Disk Partition 
      *******    Now install all the attached KEXTS to "Library / Extensions"  using Hackintool.app or by any method and rebuild cache and repair permissions
      ********    Check and compare the KEXTS in Library/ Extensions and Delete the repeated ones from Clover / Kexts / Others ( Important don't duplicate the same kexts here and there )
       
      FYI : LiluFriend.kext include ( Lilu , WhatEverGreen, AppleALC , AirportBrcmFixup ) All In One 
       
       
       
      You are Done 
      ---------------------------------------------------------------------------------------------------------------------------------
       
      What is working :
       
      - 4K Intel HD P530 2048 MB 
      - AUDIO
      - CAMERA 
      - ALL USB 3 PORTS , NO THUNDERBOLTS 
      - Keyboard and TouchPad 
      - Battery indicator 
      - Display Brightness 
      - Sleep 
      - DSDT has been patched , USB Ports modified only to MacBookPro 13.1
       
                   See the Screen Shot 
       
      Important Notice For Future OS Updates Installations : 
       
      To avoid Kernel Panic during install any future updates process please remove ( FakeSMC.kext and LiluFriend.kext ) from Library/Extensions directory to Clover / Kexts / Others .
      After update process finish put them back to Library/Extensions and delete them from clover . I hope this is clear enough
      ---------------------------------------------------------------------------------------------------------------------------------
       
      Happy Hackintosh , Let me know if you have any issue or difficulties during installation or later , I will try to help you
       
      *** Headphone Audio Distortions Fix ***
       
      - just in case having this issue with headphones , go to clover >  Devices > Properties > and change Audio Layout Id from 03000000 to 16000000 this means ( from Layout ID  3 to Layout ID 22 )
       
      if this is not enough then place Codeccommander.kext in Library/ Extensions or Clover / kexts / other
      And place hda-verb and Jack fix to usr/bin folder
      In Catalina use this command to enable disk read and write ( sudo mount -uw / ) and show hidden files to see usr/ bin folder and place fixes there... audio will be fixed successfully 
       
      ** P50 4K ICC Color Profile Calibrated **
      You can download this icc and install it for more color accurate or modify it for the best result 
       
       
      EDITED :
       
      Catalina 10.15.1 Update :
                     ( download the attached files for Catalina 10.15.1 if you like to update Mojave or to do a clean fresh update  )
       
       
      EFI.zip
      kexts.zip

      Distortions fix.zip
      CodecCommander.kext.zip
      Color Profile Calibrated.zip
×