Jump to content
  • ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By rcarjan
      Hello,
       
       I have recently purchased an Asus Vivobook E200ha. The specs are as follows:
      CPU: Intel® Cherry Trail Quad-Core Z8300 Processor, 1.84 GHz Memory: OnBoard Memory 2 GB (DDR3L) GPU: Integrated Intel® HD Graphics Storage: 32Gb eMMC Networking: Integrated 802.11 a/b/g/n/ac, Built-in Bluetooth™ V4.1 Display: 11.6" 16:9 HD (1366x768)  
       The laptop came with Windows 10, however I am not really a Windows guy, so I would like to change the OS to something else. So my options are either OSx or linux. My question is, is there any chance I could get OSx to work on it? Are the specs compatible, and if so, is t here any tutorial/explanation on how I could get it to work?(the installation guides I have found were for other systems, especially for different CPUs).
       
       I am sorry if this is a newbie question, but this is my first time even considering installing hackintosh on a machine.
       Thank you in advance.
       
    • By AndyB82
      Salve a tutti... vorrei iniziare un nuovo Progetto Hackintosh su questo simpatico Netbook  Acer Aspire One D270 - 26Dbb
       
      La configurazione è la seguente:
       
      CPU: intel Atom N2600  (2 cores -  4 Threads)
      Scheda Video: Intel GMA 3600 (400 mhz -  OpenGL 3.0 - DirectX 9.1)
      RAM: 1GB PC3-8500 DDR3
       
       
      Come procediamo?
    • By Davo009
      Hello, If someone can help me, i will be very happy.
      First sorry for my bad English.
      I Have a problem with a Gateway NV59-MS2288, i have installed iAtkos ML2, First, the setup runs very good, but next of the installation, he don´t run the OS.
      Specs:
      Intel Core i3 2.2Ghz
      RAM 4GB
      640GB HDD
      I have run it with flags like -x -v -f, with UseKernelCache=No -v, GraphicsEnabler=No -v and npci=0x3000, but it does´t start.
      Can anyone Help me?
       
       
       
       
    • By rs rider
      Ciao a tutti,
      Sono nuovo del forum, vecchio dell'hackintosh da non ricordare niente 
      Non avendo niente da fare durante le ferie Natalizie ho deciso di riesumare un vecchio Toshiba NB100, un portatile a metà tra netbook e notebook...
      Qui di seguito metto le caratteristiche hardware:
      Processore Intel Atom N270 1,6 GHz
      Memoria Ram 1024 DDR2
      HDD interno 160gb SATA Hitachi
      Schermo WSVGA TFT da 9" con risoluzione max 1024x600 pixel
      Acceleratore grafico Intel GMA950
      Wireless Atheros AR5007EG
       
      BIOS InsydeH20 Versione 1.20
       
      Ho installato Snow Leopard By Hazard versione: SL_CS_10.6.2_SSE2_SSE3_Intel_AMD
       
      Avviato con -v arch=i386 per il 32 bit.
       
      Alla quarta prova (quella in cui sono arrivato più avanti) ho configurato così l'installazione:
      Kernels= Intel Atom 10.2.0
      BootLoaders: Chameleon RC4
      Graphic Drivers: Intel GMA950 Standard
      Laptopsupport: MACam, VoodooBattery
      SataAtafix: LegacyappleintelPIIXATA
      Patches: IOATAFamilyFix
      Rosetta
       
      Il pc finita la fase di caricamento mi rimane sullo schermo bianco.
      Vi posto la foto delle ultime scritture prima della schermata bianca.
       

       
      Qualcuno sa darmi una mano? Magari dopo facciamo una guida se serve
       
      Grazie a tutti per l'attenzione e auguri!
    • By Joseph51423
      Hello, this is a simple tutorial on how to install OS X Mountain Lion and/or OS X Mavericks on a Gateway FX 7026 using a USB/flashdrive.
       
      1. Using a friends Mac, or using OS X in VMware, download myhack from the internet.  Download the Mountain Lion.dmg or Mavericks.dmg file from the Mac App Store or anywhere you can get it that is safe trustworthy source.  Using myhack is probably the easiest way and is pretty self explanatory.
       
      2. Once you get Mountain Lion/Mavericks installed on your USB using myhack.  You'll want to reboot and then go to your bios.  In the bios you'll want to change a few options.  Change your hard drives to AHCI, set the usb as first boot, and turn HPET 64-bit mode on.  If your computer bios does not have an option to turn HPET 64-bit mode on but it has an option to turn on HPET, turn that on because its basically the same thing.
       
      3. Save the changes you made in the bios and reboot with USB plugged in.  You should see the Chameleon boot loader.  From there you'll want to choose OS X.  (If the computer does not boot to the USB first, you might need to manually boot to the USB by pressing either F2, F10, F12, DEL, etc.  Options vary from computer to computer.)  Booting to OS X may take a long time.  It can take up to 15-20 minutes so be patient.  Once your in the OS X installation process, just follow the install screen.  When it gives you an option to choose the hard drive where you'll install OS X, you will see that there is no option to choose any of the hard drives.  This is because your HD's (hard drives) are not formatted correctly for OS X.  You'll want to click on the Utilities menu at the top of the screen and choose Disk Utility.  In Disk Utility, you'll need to either partition or format the HD.  Either way, you'll need to make sure the hard drive is formatted under Mac OS Extended (Journaled).  Once your done with this, quit Disk Utility and then finish up the installation.  When its done you will need to restart.  But this time, instead of booting to the OS X installation, you'll need to boot to the new HD/partition OS X was just installed on.  Once your booted into OS X, you'll need to finish up the install process such as choosing main language, setting up iCloud accounts, getting wifi working, etc.
       
      4. When your all done with the install process, you'll see the home screen of OS X.  But were not done yet, some users might face a problem where they cannot boot to OS X without using the USB installer they made.  So try and see if yours works or not.  Just reboot without the USB and see if OS X appears when you boot the computer without the USB.  If it does not, then just plug the USB back in, boot to OS X using that, and then go on to step 5.
       
      5.  To get the boot loader installed so you can boot to OS X without the USB.  You'll need to install a boot loader such as Chameleon or Clover.  I recommend Chameleon for first time users because it is a easier to get working.  What you'll need to do is go online and download the newest version of Chameleon and install it.  Installing the Chameleon boot loader is not complicated.  Once you download the Chameleon boot loader, it will download as a dmg file.  Just double click the dmg file and follow the install steps.  Self explanatory.  Pretty simple, huh?
×