Jump to content
InsanelyMac Forum
Sign in to follow this  
kadio

ASUS N55SL

Recommended Posts

Добрый день хотел бы знать есть ли пользователи этого ноутбука которые установили мак ос и пользуются писал на многих форумах везде молчание неужели этот ноутбук настолько редкий или просто он не подходит для установки . Если найдутся желающие помочь в установке пишите .

 

Mobile DualCore Intel Core i5-2450M, 1600 MHz (16 x 100)

Realtek ALC663 @ Intel Cougar Point PCH - High Definition Audio Controller [b-3]PCI

Atheros AR8151 PCI-E Gigabit Ethernet Controller (NDIS 6.20)

Intel® Centrino® Wireless-N 1030

Intel HD Graphics 3000

NVIDIA GeForce GT 635M

 

10,7,2

Не работает Видео только 1024*768 без ускорения

Не работает Звук и сеть нет индикатора заряда аккумулятора

Share this post


Link to post
Share on other sites
Advertisement

Видимо, настолько редкий.

Да и вот эта фраза не вызывает энтузиазма отвечать

Если найдутся желающие помочь в установке пишите

Т.е. если кто-то ответил, то он подписался??? Я пас, пишу как модератор.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

  • Recently Browsing   0 members

    No registered users viewing this page.



  • Similar Content

    • By qwerty12
      10.9:             #8            
       
      Read this guide fully first before attempting to perform the steps within, as you'll need to download the needed kexts etc. mentioned that are not attached and place them on your prepared OS X install USB drive. This is not also a detailed step-by-step: if you're taking the time to get a hackintosh running, I assume you know how to use a computer. If not, then Apple sell computers ready-made with OS X running on them.


      Specifications

      Processor: Intel Core i7 2670QM Processor
      Chipset: Intel HM65
      Memory: 8GB DDR3 1333 MHz
      GPU: Intel HD 3000 & NVIDIA GeForce GT 635M 2GB (Optimus)
      HDD: Hitachi 750 GB
      Wi-Fi: Intel Centrino Wireless-N 1030
      Bluetooth: Intel Centrino Wireless-N 1030
      LAN: Atheros Communications Inc. AR8151 v2.0 Gigabit Ethernet PCI-E
      Audio: Realtek ALC663
      USB 2.0: Intel Corporation 6 Series/C200 Series
      USB 3.0: ASMedia ASM1042
      Touchpad: Synaptics PS/2
      Webcam: ASUS/Sunplus Innovation Technology Inc. USB2.0 Webcam (UVC)
      Card reader: Alcor USB 2.0
      Monitor : Samsung SEC314B/156KT02-201 (1600x900)
      Optical Drive : LiteOn Slimtype BD E DS6E2SH (Reads: CDs, DVDs, Blu-Ray; Writes: CD-R, CD-RW, DVD-RAM, DVD-R, DVD+R, DVD-RW, DVD+RW,
      DVD-R DL, DVD+R DL)


      Compatibility

      What works:
      Turbo Boost using AppleIntelCPUPowerManagement Intel HD 3000 (Native 1600x900 resolution on the laptop's display panel, QE & CI [tested with Chess, BBC iPlayer]) along with PM by AppleGraphicsPowerManagment Sound Integrated microphone Touchpad with two fingers maximum Battery meter Play/Pause, Volume Up, Volume Down and Mute keys Brightness (also with the keyboard) Bluetooth (most of the time) Ethernet The USB 2.0 ports on the right of the laptop (although you probably will need a workaround like Jettison, since you do tend to get "device not safely removed" prompts when putting the laptop to sleep with a USB drive inserted) The USB 3.0 ports on the left of the laptop SD card reader Sleep (also when the lid closes) Shutdown & Restart Webcam - works in Apple apps also if you launch the Apple app, like Photo Booth, and then run netkas' CameraControl (attached) VGA Fan speed displayed by HWMonitor (thanks to Jingu) DVD Playback (with native DVD Player application; however, pay attention to the steps detailing how to get it working) What doesn't work:
      The Stop media key. As pointed out to me by EMlyDinEsH, Macs don't have a stop key... Optimus - in order for OS X to boot, the DSDT has been patched to turn off the NVIDIA card. This laptop does not allow turning off the HD3000 and making the NVIDIA chip drive the display. I once unlocked the BIOS option for it, toggled it and was presented with a blank screen for my troubles. Thankfully I memorised the sequence to reset the BIOS settings to their defaults so no harm done. Windows gives better performance for games anyway... The external subwoofer. It could be made to work, it's just that I am too lazy to figure out how to get AppleHDA to recognise it, as I never use the subwoofer anyway. Wi-Fi - it's unlikely that the Centrino 1030-N inside will ever have support for OS X. You have two choices here:
      Buy a supported USB Wi-Fi adapter. The one I had (with a Ralink 2870 chipset) would've been perfect, were it not for the Ralink Wireless Utility software letting it down a bit (sometimes doesn't show configured profiles; sometimes connects to the nearest open Wi-Fi access point, ignoring configured profiles). No USB adapter appears to OS X as a native AirPort device, so bear that in mind. Buy a DW1702 card off eBay and replace the Centrino. This is a quick process as the Centrino is inside the bottom flap on the reverse of the laptop. The Wi-Fi works well; however, its Bluetooth capabilities suck ass depending on the time of day. The Centrino did much better in this regard. The DSDT has already been patched to support the Atheros Wi-Fi (thanks, RehabMan); however install IOath3kfrmwr if you want the Bluetooth to work. Also note that you can't turn the Bluetooth off... What's not been tested:
      HDMI as I have no need for it DVD burning Line in/Microphone port Anything I've forgotten about Some notes:
      Although the N55SL supports UEFI booting, I still use Chameleon instead of Clover, because UEFI booting is broken on the N55SL: trying to put the system to sleep causes a hang in both Windows 8 (even with the proper ASUS ACPI etc. drivers installed) and with Arch Linux install media (booting the same USB and environment in MBR mode lets sleep work fine). As far as I know, Windows will not install to a GPT-partitioned drive unless it is installed in UEFI mode, so I also have OS X install to a MBR-partitioned drive. This means that you cannot create a Mac recovery partition, so Find my Mac cannot be used. The SSDT and SMBios.plist are designed to closely match a 15" MacBook Pro with an i7 in it. If you're using a N55SL with an i5 or an i3 instead of the i7-2670QM, you will need to generate a new SSDT (it is talked about later) and you may also wish to change the system definition inside smbios.plist to get a closer match to your processor and screen size. If you do this, do it before you install FileNVRAM. Chameleon Wizard is a great utility to help you generate the smbios.plist. Don't use its generated serial numbers, however. Start with this guide to create an accurate serial number. EveryMac lets you see what processor a serial number corresponds to. The default resolution is set to 1600x900 inside org.chameleon.Boot.plist. Change if your supported resolution is higher or lower. If it is lower, bear in mind that the DSDT sets the AAPL,DualLink property inside IGPU - take it out. QE/CI and full resolution should work out of the box, thanks to the patched DSDT. If it does not, however, I've included a AppleIntelSNBGraphicsFB.kext that should work. Use it as a last resort, however. (It's from 10.8.2, for one.) Getting Started

      BIOS modifications

      Right out with it! You can use the modified BIOS I've posted here which has the following benefits:
      AES-NI enabled More options unlocked in the BIOS setup screen CPU microcode updated from 23 to 28 for the i7-2670QM The important one in terms of OS X usage: the lock removed on MSR 0xe2 so that AppleIntelCPUPowerManagement.kext can write to it and not kernel panic Flashing a BIOS does come with its risks (READ THAT THREAD FULLY) so it's not for everyone. In that case, you will need to remember to patch AppleIntelCPUPowerManagement.kext so that it doesn't try to write to 0xe2 and kernel panic. You will need to remember to do this on every upgrade. I never went for this option, so I don't know the most reliable way of getting it done, sorry.

      Setting aside space for the OS X partition

      Make sure you've shrunk (if needed) a partition on the target hard drive to make space for another. Use the free space to make a partition of type FAT32, NTFS etc. so that it shows up in Disk Utility when you're installing OS X. Parted Magic is very useful for this sort of thing.

      Preparing the USB stick to install from

      I've only ever used a certain popular tool for creating an OS X USB stick. This site (for fair reasons) doesn't like references to that site and mentions of those tools, so I'll leave them out. If you find it, read its guide on how to prepare your USB and make sure you tick "Laptop Support".

      In the interests of fairness, there are two other options available:
      myHack
      Pandora's Box

      However, I have not used these programs and that "other tool" is what this guide assumes you used.

      After whatever you used has finished preparing the USB drive, you need to do some things:
      Replace OSInstall(*) to allow install to MBR disks. myHack and Pandora's Box, if you used either of them, does this for you automatically, so skip this step in that case. /Volumes/[uSB]/System/Library/Extensions/AppleIntelSNBGraphicsFB.kext must be deleted to ensure that you will actually see the installer and not a black screen. Substitute "[uSB]" with whatever you named your USB drive as. Alternatively, you can also put the DSDT.aml into the Extra folder on the USB, which will give you full resolution during the install and enable the Wi-Fi if you're using a supported card, like the DW1702 (which has an ARB195). Also place Kext Wizard on your USB stick as it will be used for installing the many kexts that we will be installing.

      Booting the OS X installer

      When it comes to booting OS X from the USB, no special boot options are needed - just boot.

      Erase the temporary partition and format it with Mac OS Extended (Journaled). Install OS X onto the newly-formatted partition.

      Booting into OS X for the first time

      You have two options here:

      Having the Blu-Ray drive working for playing DVDs but no hard disk power saving

      In this case, you must remove /Extra/ssdt-1.aml and in Energy Saver system preferences, turn off the option to "put hard disks to sleep when possible" for both Battery and Power Adapter so that tools like Disk Utility won't lock up your entire system and you can still eject the Blu-Ray drive. Source.

      or

      Turning off the Blu-Ray drive but having hard disk power saving

      In the BIOS, go to Security and disable the SATA ODD Interface. /Extra/ssdt-1.aml should be there for best results.

      In either case, you must still use the USB stick to boot OS X for now. When doing so, use the -x option (Safe Mode) so that you actually have a desktop to get to. Do the initial setup.

      (What is ssdt-1.aml? The DSDT has the IDE0 sections taken out so that playing a DVD will not lock up the system. Since, however, presumably ASUS knows better how to manage the IDE controller, I have moved the sections that were taken out by me in the DSDT into that mini-SSDT [the idea was stolen from RehabMan] so that people who do not wish to use the Blu-Ray drive do not have to suffer and will have the IDE0 section as it was by ASUS intact. If you want to play DVDs, then you have no choice - the IDE0 section must be gone and this can be done easily by moving ssdt-1.aml.)

      Having a working mouse and keyboard

      Follow the instructions here to install RehabMan's PS/2 driver.

      This driver is the best working one I've found. However, there is one problem:
      If your touchpad stops responding with this driver (it happens *very* rarely), here's a workaround:
      Install TotalTerminal and set it to activate upon pressing a hotkey. (I like F12. Who actually uses the dashboard?) In ~/.bash_profile, add this alias: alias ps2="sudo kextunload /System/Library/Extensions/VoodooPS2Controller.kext/Contents/PlugIns/VoodooPS2Trackpad.kext ; sudo kextload /System/Library/Extensions/VoodooPS2Controller.kext/Contents/PlugIns/VoodooPS2Trackpad.kext" You may also wish to add the following entry to sudoers to stop it prompting you for your password:
      [USERNAME] [HOSTNAME]=(root)NOPASSWD:/sbin/kextunload /System/Library/Extensions/VoodooPS2Controller.kext/Contents/PlugIns/VoodooPS2Trackpad.kext,/sbin/kextload /System/Library/Extensions/VoodooPS2Controller.kext/Contents/PlugIns/VoodooPS2Trackpad.kext Substitute the [uSERNAME] and [HOSTNAME] with the correct values.
      Now you can bring down your terminal with your chosen hotkey and type ps2 to have the driver reload.

      Not optimal, I know, but it's the best driver around and it works really well 99.999% of the time so there's been no reason for me to look for an alternative.

      Getting the built-in Ethernet card working

      Install AtherosL1cEthernet.kext from the kexts zip. ALXEthernet (as below) also works, but I find AtherosL1cEthernet gives me better speeds. In any case, thanks to Shailua for being awesome. Keep a copy of ALXEthernet around, though, for Safe Boot.

      Detailed install instructions can be found here, but they can be summed up thusly: use Kext Wizard to install.

      Even if you don't plan on using Ethernet, this must be installed to ensure you can connect to iCloud.

      Getting sound working

      Huge thanks to EMlyDinEsH for his AppleHDA patching guide and for his patched IOAudioFamily to ensure that sound still works when resuming. The AppleHDA.kext included is from 10.8.4 and IOAudioFamily was never updated with 10.8.4 so it is still the 10.8.3 version (but it is still the latest!). I have also patched AppleHDA dirtily to hide the sound assertion errors.

      Installation: Not much to say here, just install the AppleHDA and IOAudioFamily kexts. Install Antipop to ensure your sanity remains intact.

      You will also need to add the following to the HDEF section of the DSDT:
      Method (_DSM, 4, NotSerialized) { If (LEqual (Arg2, Zero)) { Return (Buffer (One) { 0x03 }) } Return (Package (0x06) { "hda-gfx", Buffer (0x0A) { "onboard-1" }, "layout-id", Buffer (0x04) { 0x1C, 0x00, 0x00, 0x00 }, "PinConfigurations", Buffer (Zero) {} }) } Enabling the battery meter

      Install the latest Release version of RehabMan's driver from here. Set UseExtendedBatteryInformationMethod and UseExtraBatteryInformationMethod to false in its Info.plist.

      The battery status reporting works fine with 10.8's AppleACPIPlatform.kext thanks to EmlyDinesh EmlyDinesh's battery work (taken from 68x's DSDT): http://www.insanelym...0#entry1919046.

      Thank you to Jingu, who made the DSDT report back values in mAh (needed as my battery percentage was off by 10): http://www.insanelym...80#entry1771830

      Fixing OS X's native brightness control

      To enable proper brightness control, install EMlyDinEsH's ASUS backlight driver.

      Enabling brightness control with the keyboard and the media keys

      Download the latest version of EMlyDinEsH's AsusNBWMI from this thread. In the plist, set UsingAsusBackLightDriver to true (assuming that you are, in fact, using it).

      Getting the USB 3.0 ports to work

      Install the excellent GenericUSBXHCI driver from here.

      If your USB 3.0 ports already malfunction under Windows and/or Linux currently (really slow transfer speeds, repeated disconnections...) then the firmware of the USB3.0 controller needs to be updated. After getting your hackintosh working, go back to the BIOS modifications section and read the linked thread for the BIOS mod for details on how to upgrade the USB controller firmware *properly*.

      Enabling OS X's native SD card support (purty icons!)

      Install AppleUSBCardReader.kext. This is a recent build, from 10.8. It is edited using the techniques on Prasys' blog, so thanks to him.

      Installing the Chameleon boot loader

      Download the installer for the (almost) latest Chameleon boot loader and run it.

      Next, place the contents of the attached Extra.zip containing the Extra folder into /.

      The DSDT has been very kindly initially patched by EMlyDinEsH. The theme is Chameleon's default but with a black background and ran through ImageOptim. The "Legacy Logo" option is on; if you don't like it, remove it.

      If you don't have an i7, Google for "PikeRAlpha's SSDTPRGen" and find the thread with an installer. Install it and run it.

      Installing FakeSMC

      Run kozlek's HWSensors installer to install netkas' FakeSMC along with kozlek's HWMonitor. FakeSMC is needed for OS X to actually start.

      Don't bother installing: LPCSensors, GPUSensors.

      If you're using the MacBookPro8,2 definition as is the provided smbios.plist's default, open /System/Library/Extensions/FakeSMC.kext/Contents/Info.plist and replace all the instances of ATAPAAAD with AWkPAAAE. (Credits to Hervé for his post on the OSXLatitude forum.)

      When restarting, boot into the OS X installer again using your USB flash drive.


      Completing the boot loader install

      This must be done, or you won't actually see Chameleon.

      Making sure you're booted into the OS X installer running from your USB flash drive, follow the instructions below, replacing disk0s2 with the disk and partition number of your OS X install and "OS X" with the name of your OS X partition. Disk Utility can tell you all this.

      Open the terminal, and run the following:

      cp /Volumes/"OS X"/usr/standalone/i386/boot1h /private/var/tmp/ umount /dev/disk0s2 dd if=/private/var/tmp/boot1h of=/dev/disk0s2 Reboot and you should be able to boot off your hard drive!

      Stopping the Bluetooth mouse/keyboard prompts on startup

      Open the Bluetooth Settings, click Advanced and turn off the option to automatically bring up the Bluetooth Setup Assistant if no keyboard or mouse was detected. When your laptop keyboard and mouse works, this is annoying.

      Getting a proper British keyboard layout

      If your N55SL has a British keyboard, use Liyang HU's PC105-alt keyboard layout from here and install it. You can follow this procedure to have only the PC105 layout displaying.

      Fixing iMessage

      Head here, install FileNVRAM.dylib to /Extra/Modules/ and reboot.

      Enabling the VGA port

      Inside Kexts/Graphics/modigliani-manwe-intelhd3000Patch-v3, run "sudo modgliani-intelHD3000_Patch" and it will write the new table of connectors into the Intel Sandy Bridge framebuffer kext. Restart.

      The table was determined from the information given here. fau7i's table made sense so I used it again for the N55SL: only three connectors: LVDS, VGA and *one* HDMI port.

      To actually use the VGA port, connect your VGA cable to the laptop and hold down Windows/Option in Display settings. Hit Detect Displays and your VGA monitor should activate. (Information taken from here: http://forum.osxlati...tel-hd3000-gpu/)

      Thanks to bcc9 and all others involved in getting the port to work.


      Optional Stuff

      Disabling Turbo Boost on battery power

      http://forum.osxlati...-battery-power/

      Getting About This Mac to display the monitor's proper name

      Firstly, open up Terminal to back up your current EDID information:
      cd /System/Library/Displays/ sudo tar cf Overrides.tar Overrides/ Next, grab the latest version of the ProBook Installer sources by philip_petev from here and extract it. 6GM was what I used.

      cd to "ProBook Installer"/EDID and run ./newedid.sh as the normal user (so, don't use sudo etc.). Look through the output and find your monitor's name. Open newedid.sh in your favourite text editor and replace "ProBook 4x30s" with the name of your monitor or whatever you wish to have displayed there instead.

      Finally, re-run the script as root and check to see in About This Mac if the display entry now has a proper name for your monitor.

      Disable drive ejecting when holding down F12

      NoEjectDelay

      Controlling sleep on lid close

      NoSleep

      Saving sleep state to RAM instead of the hard disk

      This speeds up going to sleep by many orders of magnitude.

      Thanks to phillip_petev for this script:
      #!/bin/sh sudo pmset -a hibernatemode 0 sudo rm -f /private/var/vm/sleepimage Stop iTunes from launching when the Play button is pressed

      https://discussions....663761#21663761
      CameraControl.zip
      Original unpatched N55SL 204 DSDT with 64 and 512MB VRAM.zip
      Kexts.zip
    • By kadio
      Hi all, there are users of ASUS N55SL laptop?
      Who were able to establish 10.7 or 10.8 and fully configure the system. I was able to run 10.7 but does not work network, sound, video, only 1024 * 768 with no acceleration.
    • By zkazzay
      Hi guys, i'm noob to hackintosh, so be patient with me i've been searching for a while now (when i say a while i mean weeks) and i can't find anyone that already installed Lion sucessfully on a Asus N55SL laptop, so i need your help, i dont know sh*t about what to do, here are my specs:
       
      ASUS N55SL
       
      Chipset: Intel® HM65 Express Chipset
      CPU: Intel® Core™ i7 2670QM Processor
      GPU: NVIDIA® GeForce® GT 635M 2GB DDR3 VRAM
      RAM: 8GB DDR3 1333 MHz SDRAM
      HDD: 750GB 7200rpm 2"5 SATA
       
       
      So i dont know what to do now, is it possible to install a fully operational Lion on my laptop? if yes where should i start? what i will need?
       
       
      Thanks.
×