Jump to content
ErmaC

Clover General discussion

22,198 posts in this topic

Recommended Posts

Advertisement
Posted (edited)

I built Clover from sources and the issue has been fixed.

 

0WGxH5w.png

Maybe the release version available at Releases · CloverHackyColor/CloverBootloader · GitHub should be updated?

 

Anyway, thanks @chris1111  for pointing me to the right direction :).

Edited by polyzargone

Share this post


Link to post
Share on other sites
3 hours ago, polyzargone said:

I built Clover from sources and the issue has been fixed.

 

0WGxH5w.png

Maybe the release version available at Releases · CloverHackyColor/CloverBootloader · GitHub should be updated?

 

Anyway, thanks @chris1111  for pointing me to the right direction :).

Yes, this release contains a mistake.

I will create 5108 corrected.

Share this post


Link to post
Share on other sites
Posted (edited)
11 hours ago, arsradu said:

Bios/CMOS reset? Might be stupid, but...I think it's worth a try, since the same issue occurs with older Clover versions and Clover is not actually in charge of that functionality... Looks like some weird bios issue.

Thanks, but it wasn't that.

 

14 hours ago, Slice said:

There is no relation to any Clover commit. It is wrong SimplePointerProtocol in your UEFI BIOS. Clover has nothing to do with it rather than implement somehow workarounds for your mouse.

Test with other mouse for example.

When debugging the mouse problem, I figured out that the problem is that in my case ResolutionX/ResolutionY were high values, and according to the arithmetic order that was before, it would always result in 0 for positive numbers.

So I committed a change to Clover to correct this. Now I can set a higher Pointer Speed in config.plist and mouse is working perfectly.

 

P.S. AptioInputFix is irrelevant for my case also, as my motherboard doesn't have &gAmiEfiPointerProtocolGuid, so nothing is applied by AptioInputFix.

Edited by Pene

Share this post


Link to post
Share on other sites

I've made a little script file to make compiling easier 

It's called CloverBuilderV0.1

Please run from its Folder, CloverBuilderV0.1

 

What does it do?

Creates link to itself then you only need type "clover" to run buildme

Best to check /usr/local/bin/clover is not there before hand.

Clones the repo into its CloverBuilderV0.1 Folder

runs "buildme"

 

Certaintly easier, well it is for me.

CloverBuilderV0.1.zip

Share this post


Link to post
Share on other sites
Posted (edited)

After one of the commits on 

Commits on Mar 29, 2020 Trying also commits from today 30 Mar and its the same issue

Black screen after booting with GeForce GT 710 HDMI the monitor goes to no signal HDMI

Edited by chris1111

Share this post


Link to post
Share on other sites
2 hours ago, chris1111 said:

After one of the commits on 

Commits on Mar 29, 2020 Trying also commits from today 30 Mar and its the same issue

Black screen after booting with GeForce GT 710 HDMI the monitor goes to no signal HDMI

Please explain more details.

Clover loads successfully to menu, you select the entry and then black screen?

Clover doesn't load at all?

Share this post


Link to post
Share on other sites
15 minutes ago, Pene said:

Please explain more details.

Clover loads successfully to menu, you select the entry and then black screen?

Clover doesn't load at all?

Yes load successfully to menue boot successfully but no signal monitor juste before the second stage boot

Iam taping to my keyboard and I hear the sound but the display stay closed

Share this post


Link to post
Share on other sites
41 minutes ago, chris1111 said:

Yes load successfully to menue boot successfully but no signal monitor juste before the second stage boot

Iam taping to my keyboard and I hear the sound but the display stay closed

I saw a mistake in one of the commits from Mar 29 regarding Nvidia injection.

Check again with the committed fix.

Share this post


Link to post
Share on other sites
Posted (edited)
4 hours ago, Pene said:

Clover loads successfully to menu, you select the entry and then black screen?

 

Yes, blackscreen here. not like @chris1111 that is getting NO SGNAL.

 

 

 

Compiling March 31, im getting this message. No errors though. (Using High Sierra with Xcode 10.1)

[CPP] menu
[CPP] screen
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: file: /Users/ella/src/CloverBootloader/Build/Clover/RELEASE_XCODE8/X64/rEFIt_UEFI/refit/OUTPUT/entry_scan/secureboot.obj has no symbols
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: file: /Users/ella/src/CloverBootloader/Build/Clover/RELEASE_XCODE8/X64/rEFIt_UEFI/refit/OUTPUT/entry_scan/securehash.obj has no symbols
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: file: /Users/ella/src/CloverBootloader/Build/Clover/RELEASE_XCODE8/X64/rEFIt_UEFI/refit/OUTPUT/entry_scan/securemenu.obj has no symbols
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: file: /Users/ella/src/CloverBootloader/Build/Clover/RELEASE_XCODE8/X64/rEFIt_UEFI/refit/OUTPUT/entry_scan/securevars.obj has no symbols
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: file: /Users/ella/src/CloverBootloader/Build/Clover/RELEASE_XCODE8/X64/rEFIt_UEFI/refit/OUTPUT/libeg/XTheme.obj has no symbols
/Applications/Xcode.app/Contents/Developer/Toolchains/XcodeDefault.xctoolchain/usr/bin/libtool: file: /Users/ella/src/CloverBootloader/Build/Clover/RELEASE_XCODE8/X64/rEFIt_UEFI/refit/OUTPUT/cpp_foundation/XUINTN.obj has no symbols
[SLINK] CLOVERX64
[DLINK1] CLOVERX64
[MTOC] CLOVERX64
[GENFW] CLOVERX64

Generating DUETEFIMAINFVX64 FV

Is it ok to disregard this message?

Edited by ellaosx

Share this post


Link to post
Share on other sites

VoodooI2C.kext is not working during installation

i put kext into the Other folder and but didn't work

anyone can tell me what is this issue

Share this post


Link to post
Share on other sites
38 minutes ago, anmool said:

VoodooI2C.kext is not working during installation

i put kext into the Other folder and but didn't work

anyone can tell me what is this issue

Check the kext info.plist if it contains lines

	<key>OSBundleRequired</key>
	<string>Console</string>

If no then add them as other kexts usually have.

Share this post


Link to post
Share on other sites
28 minutes ago, Slice said:

Check the kext info.plist if it contains lines


	<key>OSBundleRequired</key>
	<string>Console</string>

If no then add them as other kexts usually have.

1.  i changed OSBundleRequired=Root to console

i have another issue is compiling with xcode 11.4  

2.  compiling stuck with this stage [HDIUTIL] /Users/mohammad/src/CloverBootloader/CloverPackage/sym/Clover-5108-X64.iso

3, third issue is that automatically restart my laptop due to timeouts SetDPPowerState but i solved this problem in OpenCore bootloader with this option set PowerTimeoutKernelPanic=true but in clover bootoader no luck 

please slice anwser my these three issues

i attached screenshot of both issue

 

521350490_ScreenShot2020-03-31at7_36_06AM.png.8f756abdedf3c8f4e9fcb845aafbcc65.png

484012713_ScreenShot2020-03-31at7_36_23AM.thumb.png.8284bf6eecaf55556fd071e6bdc5c139.png496583495_ScreenShot2020-03-29at2_58_35AM.thumb.jpg.045f57e7f7d6cdb05e3f4feeea585c0c.jpg

i attached screenshot of both issue

Share this post


Link to post
Share on other sites
43 minutes ago, anmool said:

1.  i changed OSBundleRequired=Root to console

i have another issue is compiling with xcode 11.4  

2.  compiling stuck with this stage [HDIUTIL] /Users/mohammad/src/CloverBootloader/CloverPackage/sym/Clover-5108-X64.iso

3, third issue is that automatically restart my laptop due to timeouts SetDPPowerState but i solved this problem in OpenCore bootloader with this option set PowerTimeoutKernelPanic=true but in clover bootoader no luck 

please slice anwser my these three issues

i attached screenshot of both issue

 

521350490_ScreenShot2020-03-31at7_36_06AM.png.8f756abdedf3c8f4e9fcb845aafbcc65.png

484012713_ScreenShot2020-03-31at7_36_23AM.thumb.png.8284bf6eecaf55556fd071e6bdc5c139.png496583495_ScreenShot2020-03-29at2_58_35AM.thumb.jpg.045f57e7f7d6cdb05e3f4feeea585c0c.jpg

i attached screenshot of both issue


IOSCSIPeripherials is about SATA,, check your SATA Power management in BIOS. Set it to Disable, clover doesn't have feature for "set PowerTimeoutKernelPanic"

Share this post


Link to post
Share on other sites
3 minutes ago, Andres ZeroCross said:


IOSCSIPeripherials is about SATA,, check your SATA Power management in BIOS. Set it to Disable, clover doesn't have feature for "set PowerTimeoutKernelPanic"

i have no such option in my bois

Share this post


Link to post
Share on other sites
Posted (edited)
5 hours ago, ellaosx said:

Yes, blackscreen here. not like @chris1111 that is getting NO SGNAL.

Did you try after the latest commit to see if the black screen problem persists? What is your hardware?

 

5 hours ago, ellaosx said:

Compiling March 31, im getting this message. No errors though. (Using High Sierra with Xcode 10.1)

Is it ok to disregard this message?

Yes, it is safe to ignore that message. It just notifies about empty code (for example, code excluded via #ifdef, such as XTheme currently).

Edited by Pene

Share this post


Link to post
Share on other sites
9 hours ago, Pene said:

I saw a mistake in one of the commits from Mar 29 regarding Nvidia injection.

Check again with the committed fix.

Thanks @Pene but that's not work same problem, the monitor= no signal

my hardware is Dell Optiplex 790 / CPU i5 2500k /GeForce GT 710 2gig low profile

Share this post


Link to post
Share on other sites
Posted (edited)

@Jief_Machak

Any chance you see something else with your snprintf / printf commits or anything else that could affect functionality of Nvidia_inject from last days? We have already two reports it is broken.

I noticed one mistake and corrected it in my latest commit, but maybe you see something else that I missed :)

 

Edited by Pene

Share this post


Link to post
Share on other sites

I would be surprised that I haven't introduce a bug. I tried to be thorough. I did some unit tests (that I didn't commit) to make sure how AsciiPrint works, testing format specifier etc. But hey, there always something slipping. So I'm sorry for this uneasy transition time.

 

I'm afraid I will need someone who can reproduce the bug to take time to checkout commit by commit, so we know the last working commit. 

Share this post


Link to post
Share on other sites

I had a look at the commit "Correct mistake with nvidia inject name". So that's something that went sideways : the format specifier were corrected to %d because no cast for an integral parameter.

A good guess is that there is the same mistake somewhere else. In few hours, I'll checkout at the commit just before "Get rid of AsciiPrint." and check all the %c I might have wrongly replaced.

Share this post


Link to post
Share on other sites
Posted (edited)

@Pene

Ok after one of my friend testing the bad commit and confirming to me the issue on GT 710 on DVI

He will compill latest commit successfully and I do the same (I have compile entire source successfully) and NOW this is work on  GeForce 710 HDMI B)

Thank you very much!

Edited by chris1111
I have compile entire source successfully

Share this post


Link to post
Share on other sites
3 hours ago, chris1111 said:

@Pene

Ok after one of my friend testing the bad commit and confirming to me the issue on GT 710 on DVI

He will compill latest commit successfully and I do the same (I have compile entire source successfully) and NOW this is work on  GeForce 710 HDMI B)

Thank you very much!

Thanks for your post but I'm confused now. Didn't you say earlier that my commit Witt the fix didn't fix it?

Share this post


Link to post
Share on other sites

 

6 hours ago, Jief_Machak said:

I would be surprised that I haven't introduce a bug. I tried to be thorough. I did some unit tests (that I didn't commit) to make sure how AsciiPrint works, testing format specifier etc. But hey, there always something slipping. So I'm sorry for this uneasy transition time.

 

I'm afraid I will need someone who can reproduce the bug to take time to checkout commit by commit, so we know the last working commit. 

Don't worry about it, you are doing great work, it's all for the best.

 

21 minutes ago, Jief_Machak said:

I did the search and the only %c I found was the one already corrected by asava ( @Pene is that your github name?).

So I'm curious, is it working now ?

Yes Jief, it is my GitHub name :) 

I am curious also, as I didn't find anything else wrong either.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By mavifree
      Sir 
      I am new in this, i try to make my hp laptop in hackintosh but i facing some error in clover boot manager while installing but unable to understand it. I really try hard but not able to get there, something i noticed that i facing same kind of error every time. I just watched youtube and visitied so forum like tonymac86, InsanelyMac, Noobsplanate and so on but nothing solved. So Please Please I Request All of You If you can help me to resolve my problem.
      Here Is my Laptop Specs:
      --------------------------------------------------------------------
      Laptop : HP cs2082tx
      Mobo : HP84C1
      Southbridge : Coffee Lake-U/Y PCH
      CPU : Intel Core i5 8265U @ 1.60GHz Kaby Lake- U/Y
      Ram : 8 Gb
      HDD : 256GB SSD & 1TB HDD
      Graphics : Intel UHD Graphic 620 with nvidia MX250
      ----------------------------------------------------------------------
       
      I even don't is my laptop is compatible or not, and don't have MacBook or Mac Desktop so if you can provide important driver and other stuff for installation. I really be very thankful to you.
      Please Reply me if any other information about my laptop hardware i will attached it i only have this info right now. 
       
      and i here attached my screenshot while installation error in clover.
      Sorry for my English.
       
      Please Help Me 
       



    • By blackosx
      Do you want to quickly find your boot log, or ever wanted to know which version of bootloader is installed on your disk(s), had the need to dump your BIOS from OS X, just curious about your own system setup or been asked to provide your setup information to others when asking for assistance?
       
      DarwinDumper is a useful collection of readily available tools, and scripts wrapped in an application framework giving you a convenient method to quickly gather a system overview of your hack or Mac. And rest assured that enabling the privacy option will mask sensitive data like the IOPlatformSerialNumber, IOPlatformUUID, IOMACAddress(s), USB Serial Number(s), SystemSerialNumber, serial-number, fmm-mobileme-token-FMM, MLB and ROM efi vars and CustomUUID in the dumped files and report.
       
      Current Release Version: 3.0.4, though latest beta DarwinDumper_v3.1.0b6



      The system dumps are saved to a folder or your choice, but defaulting to the same directory as the main application. You can choose to setup a symlink to make it simple to run DarwinDumper from the Terminal.
       
      There is an option to create an html report showing a complete overview of the dumps. This report will mostly just contain the text dumps as you'll find in the main dump directory, but for some dumps there is extra processing to try to present the information in a better way. For example, the Disk Partitions and Unique ID's dump will show a visual map of the disk layout, and the DMI Tables (SMBIOS) dump will show the data split by table type.
       

       
      Note: The html report does not contain all files from a complete dump so if seeking assistance for a problem and you wish to send someone a DarwinDump then you will want to send the complete dump directory and not just the .html report file.
       
      The following can be read and dumped by DarwinDumper:
      - ACPI tables.
      - Audio codec and further info.
      - Boot loaders and configuration files.
      - CPU info.
      - Device-properties.
      - Disk partition structure / info.
      - Disk sectors (hex).
      - DMI (SMBIOS).
      - EDID.
      - I/O Kit Registry.
      - EFI Memory Map.
      - EFI vars (some).
      - Kernel information
      - Kexts - (list of currently loaded kexts).
      - Memory.
      - NVRAM (both Apple specific and UEFI firmware variables).
      - SMC Keys.
      - LSPCI (PCI vendor & device codes) dumps.
      - Power (Sleep/Hibernate) settings.
      - RTC.
      - System Profiler.
      - System BIOS.
      - System Log(s).
      - Video BIOS.
       
      License:
      DarwinDumper is licensed under GNU General Public License, version 3.0 (GPLv3).
       
      Tools included:
      AnalyseVBIOS
      Copyright: Not Known. License: Not known Source: http://www.insanelymac.com/forum/topic/211294-information-on-vesa-modes-in-atinvidia-bios/   AppleIntelInfo Copyright: © 2012-2017 Pike R. Alpha. All rights reserved. License: Creative Commons Attribution-NonCommercial https://github.com/Piker-Alpha/AppleIntelInfo   atomdis Copyright: Michael Larabel @ Phoronix.com License: GPL Version 2 Source: http://www.phoronix.com/scan.php?page=article&item=amd_atombios_dumper   bgrep Copyright 2009 Felix Domke <tmbinc@elitedvb.net>. All rights reserved.   Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:      1. Redistributions of source code must retain the above copyright notice, this list of       conditions and the following disclaimer.      2. Redistributions in binary form must reproduce the above copyright notice, this list       of conditions and the following disclaimer in the documentation and/or other materials       provided with the distribution.   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL <COPYRIGHT HOLDER> OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.   The views and conclusions contained in the software and documentation are those of the authors and should not be interpreted as representing official policies, either expressed or implied, of the copyright holder.   Source: https://github.com/tmbinc/bgrep   bdmesg Copyright 2010 by Islam M. Ahmed Zaid. All rights reserved. License: GPL Version 2 Source: http://forge.voodooprojects.org/p/chameleon/source/tree/HEAD/trunk/i386/util/bdmesg.c   cmosDumperForOsx Created by rafirafi, revised extensively by STLVNUB License: Information not available Source: http://www.projectosx.com/forum/index.php?showtopic=2432&st=0&p=21522&&do=findComment&comment=21522   csrstat Created by Piker-Alpha Copyright: © 2015-2017) by Pike R. Alpha License: Information not available Source: https://github.com/Piker-Alpha/csrstat   dmidecode http://www.nongnu.org/dmidecode/ License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?showtopic=2488   dumpACPI Created by blackosx. Idea taken from PHPdev32's MacIASL. Source: https://bitbucket.org/blackosx/dumpacpi   edid-decode Created by Adam Jackson, revised by Andy Vandijck License: Information not available Original Source: http://cgit.freedesktop.org/xorg/app/edid-decode Revised Source: http://bit.ly/1qAzqxb   fdisk440 Apple Computer, Inc. License: APSL v2.0 Source: http://forge.voodooprojects.org/p/chameleonApplications/source/tree/HEAD/trunk/fdisk.tproj   FirmwareMemoryMap script Amit Singh (showbootermemorymap) License: Information not available Source: http://www.projectosx.com/forum/index.php?showtopic=2447&st=120&p=19329&&do=findComment&comment=19329   flashrom http://flashrom.org/Flashrom License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?s=&showtopic=2485&view=findpost&p=40285   getcodecid Copyright © 2012 AnV Software. All rights reserved. License: Information not available Source: http://www.insanelymac.com/forum/topic/285277-getcodecid-command-line-tool-to-detect-codec-id/   getdump Created by fassl?, modifications by Slice and AutumnRain? License: Information not available Source: https://svn.code.sf.net/p/voodoohda/code/tranc/getdump.c   gfxutil Copyright 2008 mcmatrix. All rights reserved. License: Information not available http://forum.netkas.org/index.php?PHPSESSID=q2isd338ihjjpcgbng7tne08pdv7tr4f&topic=64.0 Source: https://dl.dropbox.com/u/222155/gfxutil_source.zip   iasl Copyright © 2000 – 2014 Intel Corporation. License: Information not available Source: https://github.com/acpica/acpica   ioregwv Apple Computer, Inc. License: APSL v2.0 Source: https://bitbucket.org/blackosx/ioregwv   lzma Copyright © 2013 Igor Pavlov. License: GNU Lesser General Public License Source: http://www.7-zip.org/sdk.html   lzvn Copyright: © 2014 Apple Computer, Inc. All rights reserved. License: APSL Credit: Piker-Alpha, Andy Vandijck, MinusZwei. https://github.com/Piker-Alpha/LZVN   MacGap2 Created by Tim Debo. All rights reserved. License: MIT Source: https://github.com/MacGapProject/MacGap2   nvram Apple Computer, Inc. License: APSL v2.0 Source: https://bitbucket.org/blackosx/nvram   oclinfo Copyright © 2009 cmf License: GPL Version 2 Source: http://www.insanelymac.com/forum/topic/170796-opencl-info/   pciutils driver (DirectHW.kext) DirectHW is Copyright © 2008-2010 coresystems GmbH License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?showtopic=2480   pciutils lspci Copyright © 1997--2008 Martin Mares License: GPL Version 2 Source Code: https://kernel.googlesource.com/pub/scm/utils/pciutils/pciutils.git/+/master   Macpmem driver (Macpmem.kext) Copyright © 2007-2011 Volatile Systems. Copyright 2013-2014 Google Inc. All Rights Reserved. License: GPL Version 2 Source Code: https://github.com/google/rekall/tree/master/tools/osx/MacPmem]https://github.com/google/rekall/tree/master/tools/osx/MacPmem   RadeonDump Created by Dong Luo. Copyright 2008. All rights reserved. Modified by Andy Vandijck License: Information not available Source: http://www.insanelymac.com/forum/topic/282794-darwindumper/page__st__120?do=findComment&comment=1920068   radeon_bios_decode Created by Dong Luo. Copyright 2008. All rights reserved. License: Information not available Source: http://www.insanelymac.com/forum/topic/282794-darwindumper/page__st__120?do=findComment&comment=1920068   smbios-reader http://www.nongnu.org/dmidecode/ License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?showtopic=2208   SMC_util3 Copyright © 2006 devnull  License: GPL Version 2 Source: http://www.projectosx.com/forum/index.php?s=&showtopic=2447&view=findpost&p=23230   VoodooHDA.kext Created by fassl?, modifications by Slice and AutumnRain? License: https://sourceforge.net/p/voodoohda/code/HEAD/tree/tranc/License.h]https://sourceforge.net/p/voodoohda/code/HEAD/tree/tranc/License.h Source: https://sourceforge.net/p/voodoohda/code/HEAD/tree/]https://sourceforge.net/p/voodoohda/code/HEAD/tree/   x86info Written to succeed CPUID by Phil Karn (KA9Q). Contributed to by various people. OS X compatability by Slice License: GPL Version 2 Original Source: https://github.com/kernelslacker/x86info Revised Source: http://www.projectosx.com/forum/index.php?s=&showtopic=2447&view=findpost&p=41134  
       
      Running DarwinDumper from the command line:
      From Terminal, you can initiate DarwinDumper by running the following script directly.
       
       
       
      /DarwinDumper.app/Contents/Resources/public/bash/script.sh To help with this, the UI has a Symlink option which you can click to create a symbolic link which points to the above script. DarwinDumper can then be subsequently run from the command-line by loading a new Terminal window and typing darwindumper followed by return.

      Credits (in alphabetical order):
      Adam Jackson, Amit Singh, Andy Vandijck, Apple Inc., arsradu, bcc9, blackosx, cmf, DieBuche, dmazar, Dong Luo, droplets, ErmaC, Felix Domke, Google Inc., Intel Corporation, InsanelyDeepak, JrCs, Kabyl, Kynnder, Martin Mareš, mcmatrix, Michael Larabel, Mickey1979, phcoder, Phil Karn, Piker-Alpha, rafirafi, гык-sse2, Slice ,sonotone, STLVNUB, THe KiNG, Trauma, Volatile Systems, xsmile, !Xabbu.
       
      DarwinDumper was originally inspired as an open project by Trauma, it has remained an open project and please keep it an open project, so if you make any changes or additions to it then please share your work here.
       
      Please report any feedback, requests or bugs.
       
      Please note:
      DarwinDumper v3 requires OS X 10.9 and newer to run in the Finder, though it should work from the command line okay on older OS versions.

      The following link retains the download for v2.9.9.2 for older OS versions.

      DarwinDumper Download
    • By STLVNUB
      Script file to clone and help build Clover, Opencore (official and unofficial) repos
      Script will create link to itself in /usr/local/bin/bob
      Wouldn't hurt to check there are no "Bob"'s there, i "Hope" there isn't.
      Then you only need to type bob. and a parameter
      "n" for NDK repo, unofficial
      "a" for ACID repo, official
      "c" for CLOVER
      It also takes "all" for ALL, if your game
       
      Easier typing bob than.....usual stuff
      Enjoy
       
    • By MaLd0n
      -Donations with PayPal
      https://tinyurl.com/r2bvzm7
       
      -Donations with Bitcoin
      33HeGCuCSh4tUBqdYkQqKpSDa1E7WeAJQ3
       
      -Donations with PicPay 
      @danielnmaldonado
       
      ---TUTORIAL---
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Original Post--
      https://www.olarila.com/topic/6531-olarila-hackbeast-z390-designare-thunderbolt-full-dsdt-patches-clover-opencore/
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://www.olarila.com/topic/6364-mojave-catalina-on-mobos-series-100200300-with-opencore-bootloader/
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By heiza
      Ryzen 7 2700X
      ASUS Prime X470 Pro
      32GB G.Skill Ripjaws V DDR4-3200
      ASRock Phantom Gaming Vega 56
       
      My motherboard doesn’t have an option for 4G encoding. And boot modes are listed as ”Windows UEFI Mode” and “Other OS”.
       
×