Jump to content
ErmaC

Clover General discussion

20,440 posts in this topic

Recommended Posts

41 minutes ago, ellaosx said:

what is your ./ebuild flag?

 

In my personal script, I use basic flag with XCODE8 toolchain: ./ebuild.sh -fr

 

Take a look also in Buildme script (Clover Repo)

Share this post


Link to post
Share on other sites
Advertisement

Z390 doesn't boot with 2x32GB memories. After entering the memory, it moves.

 

Zrzut ekranu 2019-09-19 o 09.54.37.png

 

 

Edited by ori

Share this post


Link to post
Share on other sites
34 minutes ago, ori said:

Z390 doesn't boot with 2x32GB memories. After entering the memory, it moves.

 

Zrzut ekranu 2019-09-19 o 09.54.37.png

 

Do you try to remove 32GB from SMBIOS? And select XMP Profile 1 or 2 instead in Clover settings. 

 

What Z390 mobo? On Z390 Gigabyte, I have select XMP Profile 1 in BIOS, for 3000MHZ frequency

Capture d’écran 2019-09-19 à 10.31.09.png

Share this post


Link to post
Share on other sites
4 hours ago, ori said:

Still not starting.

 

532451114_Zrzutekranu2019-09-19o11_15_56.png.79911811fd0bb63fc4dcf98962654733.png

413396665_Zrzutekranu2019-09-19o11_13_48.png.5ece0fa1a60dbec7e42c151aba56f732.png50600860_Zrzutekranu2019-09-19o11_16_34.png.a78257f5d94bcb938588f17d126f79b4.png

 

IMG_20190919_112220.thumb.jpg.f7f0fa81156c8193b03650e587882e1f.jpg

 

 

What macOS? 

Could you post your EFI Folder. Please.

 

Edit: put the XMP to profile 1 and set the trust variable to true in clover and rebooted. If you already have the OsxAptioFix2Drv-free2000.efi or AptioMemoryDix installed "and you should also add "slide=0" to the Boot arguments in Clover. 

Edited by Matgen84

Share this post


Link to post
Share on other sites
5 hours ago, ori said:

Gigabyte Z390 M Gamming

 

BIOS:

XMP Profil1 3000MHz

 

Clover:

 

Zrzut ekranu 2019-09-19 o 11.07.27.png

 

What RAM is that? Have you tried lowering the frequency to something like 2666MHz?

Also, have you tried booting with a single memory stick?

Also, what's the CPU on this system and which SMBIOS profile are you currently using for it?

Also, something else that's not really clear to me... If this is 2 sticks of 32GB each, why did you add your RAM as 4x16GB in config?

 

Could you, please, add all your hardware information to your signature? It would make things a looot easier. I gotta tell you, at this point, this looks more like a hardware issue rather than a software/Clover issue.

Edited by arsradu

Share this post


Link to post
Share on other sites

About github version numeration

Dell:CloverHackyColor sergey$ git describe head --tags
5084-8-g862ce3cc
Dell:CloverHackyColor sergey$ 

5084 - is the last sync sources with sf.net

8 - a number of commits on github over the revision. So logically it will be 5084+8 but sf.net as well as github has intermediate commits not influencing on binaries.

g862ce3cc - last commit id

Share this post


Link to post
Share on other sites
1 hour ago, Slice said:

About github version numeration


Dell:CloverHackyColor sergey$ git describe head --tags
5084-8-g862ce3cc
Dell:CloverHackyColor sergey$ 

5084 - is the last sync sources with sf.net

8 - a number of commits on github over the revision. So logically it will be 5084+8 but sf.net as well as github has intermediate commits not influencing on binaries.

g862ce3cc - last commit id

 

Thanks for your explanations :)

 

I understand what it is. But the compilation made and the pkg realized, it appears only the revision on the installer: for example, Clover v2.5 r5084. We do not know which commits are included since the release.

 

Since intermediate numbering is not possible as on SF (and possible on GitHub before r5084, pre-release r5081), we could display its info (commits id) in version line into "Read Info" like FakeSmc Rehabman

 

Capture d’écran 2019-09-19 à 17.08.13.png

 

Capture d’écran 2019-09-19 à 17.04.32.png

Capture d’écran 2019-09-19 à 17.30.12.png

Edited by Matgen84

Share this post


Link to post
Share on other sites
2 hours ago, arsradu said:

 

What RAM is that? Have you tried lowering the frequency to something like 2666MHz?

Also, have you tried booting with a single memory stick?

Also, what's the CPU on this system and which SMBIOS profile are you currently using for it?

Also, something else that's not really clear to me... If this is 2 sticks of 32GB each, why did you add your RAM as 4x16GB in config?

 

Could you, please, add all your hardware information to your signature? It would make things a looot easier. I gotta tell you, at this point, this looks more like a hardware issue rather than a software/Clover issue.

 

RAM is marked in the picture ( Corsair CMK64GX4M2D3000C16 64 GB (2x 32 GB) 3000 MHz CL16-20-20-38 1.35 V). I also tried Corsair CMK64GX4M2A2666C16 64 GB (2x 32 GB) 2666 MHz and it was the same.
I lowered it even to the lowest values. I disabled XMP in the BIOS. And it did nothing. I tried with one memory and it didn't start either. It wasn't until somewhere on the forum that I found an entry that someone made a post under SMbios 4x16GB and it went. I don't understand why, but it works with this post.
The processor is i7 9700K. SMbios iMac 19.1.
Gigabyte Z390 M Gamming motherboard. I can also check the Z90 Aorus Pro, but I doubt anything will change.
Interesting that on Open Core enters MacOS. Works well with Windows.
It looks like Clover's problem to me. Because I saw more such posts in the forums. This happens on different motherboards. Clover once had a similar problem with memories in the Asus Z370, where it only saw 2 out of 4 RAM and had to be added manually.

 

 

 

Edited by Slice
dont link to tonymac

Share this post


Link to post
Share on other sites
38 minutes ago, Slice said:

I will think how to implement long version string into package and maybe into About Clover.

 

Thanks a lot :) Both would be great

Share this post


Link to post
Share on other sites
25 minutes ago, ori said:

 

RAM is marked in the picture ( Corsair CMK64GX4M2D3000C16 64 GB (2x 32 GB) 3000 MHz CL16-20-20-38 1.35 V). I also tried Corsair CMK64GX4M2A2666C16 64 GB (2x 32 GB) 2666 MHz and it was the same.
I lowered it even to the lowest values. I disabled XMP in the BIOS. And it did nothing. I tried with one memory and it didn't start either. It wasn't until somewhere on the forum that I found an entry that someone made a post under SMbios 4x16GB and it went. I don't understand why, but it works with this post.
The processor is i7 9700K. SMbios iMac 19.1.
Gigabyte Z390 M Gamming motherboard. I can also check the Z90 Aorus Pro, but I doubt anything will change.
Interesting that on Open Core enters MacOS. Works well with Windows.
It looks like Clover's problem to me. Because I saw more such posts in the forums. This happens on different motherboards. Clover once had a similar problem with memories in the Asus Z370, where it only saw 2 out of 4 RAM and had to be added manually.

 

 

 

 

Thank you for the detailed information! That's a lot better. And also, sorry for not realizing the RAM model was actually in your screenshot. My bad. :D 

 

Well, if it works with Windows, if it works with OC (with what I'm guessing is the same SMBIOS)...then yeah....I guess it could be Clover issue. You don't happen to have one 16GB stick laying around, do you? I would be curious to see what happens in that case. Maybe it works with 64GB actually paired in 4x16GB sticks but not with 2x32GB sticks? I don't see why (although Clover issue could be a possibility), but it would still be an interesting result, in my opinion.

Edited by arsradu

Share this post


Link to post
Share on other sites
26 minutes ago, ori said:

 

RAM is marked in the picture ( Corsair CMK64GX4M2D3000C16 64 GB (2x 32 GB) 3000 MHz CL16-20-20-38 1.35 V). I also tried Corsair CMK64GX4M2A2666C16 64 GB (2x 32 GB) 2666 MHz and it was the same.
I lowered it even to the lowest values. I disabled XMP in the BIOS. And it did nothing. I tried with one memory and it didn't start either. It wasn't until somewhere on the forum that I found an entry that someone made a post under SMbios 4x16GB and it went. I don't understand why, but it works with this post.
The processor is i7 9700K. SMbios iMac 19.1.
Gigabyte Z390 M Gamming motherboard. I can also check the Z90 Aorus Pro, but I doubt anything will change.
Interesting that on Open Core enters MacOS. Works well with Windows.
It looks like Clover's problem to me. Because I saw more such posts in the forums. This happens on different motherboards. Clover once had a similar problem with memories in the Asus Z370, where it only saw 2 out of 4 RAM and had to be added manually.

 

 

 

Some users on a banned forum succeed to install Clover + 64GB Ram. Could you post your EFI Folder?

 

You can open a ticket in SourceForge, if you believe Clover's problem

 

@arsradu and me ask you to put complete signature. Please

Edited by Matgen84

Share this post


Link to post
Share on other sites
14 minutes ago, Matgen84 said:

 

Some users on a banned forum succeed to install Clover + 64GB Ram. Could you post your EFI Folder?

 

You can open a ticket in SourceForge, if you believe Clover's problem

 

@arsradu and me ask you to put complete signature. Please

 

I understand that other forums are blocked here, but I found only one example in this forum. Google has shown more.
I tried 2x16GB, 4x16GB and no problem.
I have 128GB of RAM on X299 and no problem with Clover.
It seems to me an allocation error when configuring the Z390 and 32GB of RAM.

Share this post


Link to post
Share on other sites
16 minutes ago, Florin9doi said:

 

There is a interesting answer

 

 

Capture d’écran 2019-09-19 à 19.25.02.png

9 minutes ago, ori said:

 

I understand that other forums are blocked here, but I found only one example in this forum. Google has shown more.
I tried 2x16GB, 4x16GB and no problem.
I have 128GB of RAM on X299 and no problem with Clover.
It seems to me an allocation error when configuring the Z390 and 32GB of RAM.

 

What AptioFix did you use? Try to use Free2000 version.

 

EDIT: What BIOS for your Z390 M Gaming?

Edited by Matgen84

Share this post


Link to post
Share on other sites
4 minutes ago, Matgen84 said:

 

There is a interesting answer

 

 

Capture d’écran 2019-09-19 à 19.25.02.png

 

What AptioFix did you use? Try to use Free2000 version.

 


I tried AptioMemoryFix.efi and OsxAptioFix2Drv-free2000.efi. At Clover he always stays in the same place.
On Open Core I have OsxAptioFix2Drv-free2000.efi
 

Share this post


Link to post
Share on other sites
5 minutes ago, ori said:

 


I tried AptioMemoryFix.efi and OsxAptioFix2Drv-free2000.efi. At Clover he always stays in the same place.
On Open Core I have OsxAptioFix2Drv-free2000.efi
 

 

What BIOS version? Set DVMT Pre-Allocated to 32M. This single change enabled the use of the standard driver OsxAptioFix3Drv.efi

Share this post


Link to post
Share on other sites
25 minutes ago, ori said:

 

I understand that other forums are blocked here, but I found only one example in this forum. Google has shown more.
I tried 2x16GB, 4x16GB and no problem.
I have 128GB of RAM on X299 and no problem with Clover.
It seems to me an allocation error when configuring the Z390 and 32GB of RAM.

 

Ok, so it is a problem with this specific configuration.

 

I'm guessing the RAM sticks are in the correct slots according to the motherboard's user manual, right?

 

Just trying to exclude the most common mistakes. :D Cause if everything is done correctly (and my guess is that it is)...then the most unlikely possibility becomes the only logical one.

Share this post


Link to post
Share on other sites
11 minutes ago, Matgen84 said:

 

What BIOS version? Set DVMT Pre-Allocated to 32M. This single change enabled the use of the standard driver OsxAptioFix3Drv.efi

BIOS:
190919175105.thumb.jpg.d3b4031b1ada092e396174179d6e6755.jpg

190919175128.thumb.jpg.ad8d561e1a47b0bcfe78f2875aa42d2f.jpg

 

Driver:

ApfsDriverLoader.efi
DataHubDxe.efi
FSInject.efi
OsxAptioFix3Drv.efi
PartitionDxe.efi
SMCHelper.efi
VBoxHfs.efi

 

Still the same.

I tried the same drivers as I have in Open Core (ApfsDriverLoader.efi HfsPlus.efi OsxAptioFix2Drv-free2000.efi) and it also doesn't work on Clover

 

 

1 minute ago, arsradu said:

 

Ok, so it is a problem with this specific configuration.

 

I'm guessing the RAM sticks are in the correct slots according to the motherboard's user manual, right?

 

Just trying to exclude the most common mistakes. :D Cause if everything is done correctly (and my guess is that it is)...then the most unlikely possibility becomes the only logical one.

I tried singly, twice in each slot. The effect is the same.

3 minutes ago, iCanaro said:

tested boot arguments

 

slide=0

 

slide=0 dart=0 darkwake=no keepsyms=1 debug=0x100

The effect is the same.

Share this post


Link to post
Share on other sites
11 hours ago, ori said:

BIOS:
Driver:

ApfsDriverLoader.efi
DataHubDxe.efi
FSInject.efi
OsxAptioFix3Drv.efi
PartitionDxe.efi
SMCHelper.efi
VBoxHfs.efi

 

Still the same.

I tried the same drivers as I have in Open Core (ApfsDriverLoader.efi HfsPlus.efi OsxAptioFix2Drv-free2000.efi) and it also doesn't work on Clover

 

 

I tried singly, twice in each slot. The effect is the same.

 

slide=0 dart=0 darkwake=no keepsyms=1 debug=0x100

The effect is the same.

 

Multiple time, I asked you to post your EFI Folder???

 

Try to contact @MaLd0n here or on olarila.com, he have the same mobo but with i9-9900K

 

 

Share this post


Link to post
Share on other sites
2 hours ago, Sherlocks said:

@Slice

real mac smbios info from system profiler

like this

https://forums.macrumors.com/threads/macos-10-15-catalina-on-unsupported-macs.2183772/post-27749989

8.png.49c14259c2f9833c67cf056fb652380c.png

 

but we always include apple rom info

 

 

can we choice enable/disable to hide this apple rom info part?

It is also hackintosh, see Lilu on screens.

Real Mac doesn't show this info if it has SMBIOS 3.0. To do this in Clover we have to remake a huge part of codes.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   1 member

  • Similar Content

    • By kushwavez
      Acer Aspire V15 V5-591G - Catalina 10.15
      Original link:
      https://osxlatitude.com/forums/topic/11355-acer-aspire-v-15-v5-591g-catalina-windows-10/
      (Note: mine is 55TU version, but the bootpack will work fine with another versions of 591G, for example: V5-591G-71K2, -764Z, -59PU, etc.)
      Specifications:
      - Motherboard: USOPP_SLS (Skylake-H PCH)
      - BIOS: Insyde Corp. v 1.15
      - CPU: Intel Core i5-6300HQ 2.3 GHz (Skylake)
      - GPU: NVIDIA GeForce GTX 950M 2 GB (Optimus) & Intel HD Graphics 530
      - RAM: SK hynix 4 GB DDR4 (Later I bought + KINGSTON 4 GB) 2133 MHz
      - WiFi + Bluetooth: Qualcomm Atheros QCNFA344A 5 GHz (Later -> Broadcom BRCM94352Z M.2 5 GHz WiFi + 4.0 Bluetooth)
      - Audio: Realtek HD Audio: ALC 255 
      - Ethernet: Realtek RTL8168/8111
      - Card Reader: Realtek USB 2.0 Card Reader (USB2.0-CRW)
      - Webcam: HD Webcam
      - HDD: TOSHIBA MQ01ACF032 320 GB HDD
      - SSD: SPCC M.2 230 GB SSD
      - Display: 1366x768 (15.6", Matte)
      - Battery: 6 cell 56Wh / 5040mAh
      - Connectors: 
      1x SD Card Reader 2x USB 3.0 (1x USB Charging), 1x USB 2.0 1x VGA 1x HDMI 1x 3.5mm microphone/audio combined jack connector 1x Ethernet (Rj-45) - Keyboard & Touchpad: Multi-Touch & Multi-gestures ELAN 501 Touchpad, Backlight Keyboard.
      Working:  
      - Wi-Fi (with BCM94352Z)
      - Bluetooth hand-off (With BCM94352Z)
      - Full Graphics enabled on HD 530: ig-platform-id: 0x191b0000 (HD 530 Mobile)
      - Display: if default colour profile is corrupted (blue is not actual blue but purplish) Use "Rec. ITU-R BT. 709-5" Color Profile (System Pref. -> Displays -> Color)
      - HDMI & VGA Outputs: AppleGraphicsDevicePolicy.kext Clover patch
      - Audio (ALC 255): (Internal Speakers, Internal Microphone, Headphone jack with AppleALC, ALCPlugFix -> layout-id=17)
      - Ethernet Realtek 8168/8111: RealtekRTL8111.kext
      - App Store, Messages, FaceTime, Siri, iCloud (native)
      - Integrated webcam (native)
      - 3.0 USB (native)
      - Touchpad and Keyboard (ELAN501): Fn keys are good, the weird thing is the Brightness key. On my keyboard it's Pause Break:Br-up, Fn+F12:Br-dwn-> To fix this try Karabiner (VoodoPS2Controller.kext), - for gestures try SmartTouchpad drivers
      - Battery info: Install ACPIBatteryManager.kext with Kext Utility or other installer.
      - Sleep Mode
      - SSD with TRIM enabled (to enable trim, open Terminal and write "sudo trimforce enable")
      Not working:
      - Original Wi-Fi (Qualcomm Atheros QCNFA344A):  unsupported, you need switch to BCM94352Z or just use a mini usb wifi dongle.
      - NVIDIA GeForce GTX 950M: Optimus not supported.
      - Card Reader: Unsupported -> Can't really fix because I don't have any SD Card at the moment, maybe can be fixed by adding Prod & Ven IDs to AppleStorageDevices.kext, I never used it anyway. name: "USB2.0-CRW" Prod ID: "0x0129" Ven ID: "0x0bda  (Realtek Semiconductor Corp.)"
      For Wi-Fi:
      - 1st method: You can choose an external USB wifi dongle (I used TP-Link Archer T1U (5GHz support), TP-Link has official macOS drivers, you just need to install it
      - 2nd and I think the best method: Replace your M.2 Qualcomm Card with a compatible BCM94352Z card (you will have hand-off Bluetooth too), just install the kexts (enabled with BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakePCIID.kext, FakePCIID_Broadcom_WiFi.kext, they're all in my attached zip). You could buy this card from ebay, aliexpress, or amazon
       
      Issues:
      - None
      BIOS Settings:
      - BIOS version 1.15 (irrelevant)
      - Secure Boot: Disabled
      - Touchpad: Advanced
      - Boot mode: UEFI
      Getting ready for Installation:
      - Download the Catalina install zip (bootpack & postinstall): acer_aspire_V591G-55TU_cata.zip
      Installation:
      - Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager)
      - Copy my Clover folder to the USB's EFI folder
      - Boot with the Installer USB
      - If you stuck in boot, reboot and in the Clover bootloader select "config_debug.cfg" -> you'll have more informations about the freeze
       
      Please open the README.rtf in my install zip for more informations about the USB Installer & Post installation!
      For any system kext installation\modification you need to boot with config_debug.plist (or disable SIP manually)
      Also on Catalina the System folder is read-only, so you need to remount in rw. 
      If you have a single RAM and getting panic at boot, then you need to edit the "config.plist" with these (SMBIOS->after "Version 1.0"):
      ->Edit "Frequency" and "Size" to match your RAM values
      <key>Version</key> <string>1.0</string> <key>Memory</key> <dict> <key>Channels</key> <integer>1</integer> <key>SlotCount</key> <integer>1</integer> <key>Modules</key> <array> <dict> <key>Slot</key> <integer>0</integer> <key>Size</key> <integer>8192</integer> <key>Frequency</key> <integer>2133</integer> <key>Type</key> <string>DDR4</string> </dict> </array> </dict> </dict>  
      PowerManagement  fix:
      Set HWPEnable=YES in Clover (already set), CPUFloor to "700", Frequency to "2300" and "3200"(Normal and Turbo, if you have i7-6700HQ version then it should be "2600", "3500") and "FrequencyVectors" from "0x0d000000" to "0x07000000" in "S/L/E/IOPlatformPluginFamily.kext/Contents/PlugIns/X86PlatformPlugin.kext/Contents/Resources/Mac-A5C67F76ED83108C.plist", MSR _xcpm_idle Patch to KernelToPatch in Clover (If you have High Sierra, change "MatchOS" to 10.13):

      <key>KernelToPatch</key> <array> <dict> <key>Comment</key> <string>MSR 0xE2 _xcpm_idle instant reboot(c) Pike R. Alpha</string> <key>Disabled</key> <false/> <key>Find</key> <data> ILniAAAADzA= </data> <key>MatchOS</key> <string>10.14</string> <key>Replace</key> <data> ILniAAAAkJA= </data> </dict> </array> Reboot, and it's 800MHz in idle state, same on Windows.
       

      Elan SmartTouchpad
      I only use scrolling, one-, double- & tripletap
      If you want to try other gestures go to this link for more informations, options (v4.6.5) ->  DETAILS ABOUT THE SMART TOUCHPAD DRIVER FEATURES
      Fn Brightness keys not working with this, tried several things without success. With VoodoPS2Controller it's working, but you'll have no gestures (neither scrolling).
       
       
      Before updating to a new version of Catalina please update kexts (and clover if necessary) to newer versions to avoid kernel panics.
      Generate a serial number with Clover Configurator.app (open up your config.plist with CC then -> SMBIOS -> Serial Number -> Generate New)
       
      Catalina & Windows 10 Dual-Boot:
      Dual-boot clean install (on one drive), UEFI Only:
       
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac),   Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart,  Boot into your Win installer, Format the partition you created for Win, install.   Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       5.  You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      Dual-boot with Windows installed first (on one drive), UEFI Only:
      If you already have Windows and you don't want to lose all your data there is a hope:
      I created a video from this restore method: [Hackintosh] Dual-Boot High Sierra & Windows - when Windows already installed - no data waste - UEFI
      You need bootable Mac Installer and a full system restore image (link is in my video's description).
      (You may see errors if your EFI partition is not 200 MB)
       Boot into your Windows, resize your partition or create one for Mac.  Boot into your Mac installer and in Disk Utility format the partition you created.  Restore from image: select your full system restore image.  When it's finished restoring you just need to restart, then boot to the system with your usb.  When you successfully booted to Mac desktop, mount your EFI partition (use terminal or an EFI mounter app), open EFI, you will see there is a Microsoft folder already (don't touch that!). Copy my CLOVER folder to the EFI folder then Restart.  Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       7.  You're done! You can select your old Windows and your new macOS!
      (Only tried with Windows 8/8.1/10. I don't know Windows 7,etc.)
       
      IF YOU GETTING ERRORS DURING MAC RESTORE:
      - Make sure you have partitions in GPT
      - Windows using 100 MB EFI and will annoy the Mac restore. Don't worry, just ignore the errors.
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      - Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)
       
      IF YOU USED RESTORE METHOD THEN CAN'T MOUNT YOUR EFI PARTITION (No EFI partition found):
      - It's because your EFI is not 200 MB or not an "Apple" original EFI,  but do not worry, try another EFI mounter, or mount from terminal (I used EFI mounter v3: Getting errors, but you can mount and use without problem)
      - You also could "mount" the EFI from Windows:
      1st method: open cmd in administrator mode and type:
      diskpart list vol (Now select the "System" volume,(FAT 32) For example I select 4) sel vol 4 list part (Select System type partition, for example 2) sel part 2 assign letter=b (This will "mount" your EFI partition) Open Explorer++ or TotalCommander in administrator mode to manage EFI remove letter=b (This will "unmount" your EFI) 2nd method: open cmd in administrator mode and type:
      mountvol b: /s (This will mount your EFI) Open Explorer++ or TotalCommander in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI) Thanks to all OSXLatitude members for helping me out! (Jake Lo, Hervé, Bronxteck, black.dragon74)!
      Notes:
      2019.10.09: Installed macOS Catalina 10.15 -> Updated Clover, kexts & config.plist -> no problem so far
      2019.08.18: Updated to 10.14.6 -> no problem when/after installing
      2019.06.01: Updated to 10.14.5 -> no problem when/after installing
      2019.04.25: Optimized touchpad scrolling -> updated install files
      2019.03.30: Fixed USB 3.0 ports, fixed Bluetooth crashes after sleep -> updated bootpack
      2019.03.28: Updated to 10.14.4. Unexpected crashes while updating to 10.14.4 -> fixed by updating Clover to the latest (v4910) version. Bluetooth crashes appeared -> fixed by downgraded Brcm*.kexts. Updated bootpack.
      2019.02.24: Bluetooth crashes after sleep -> fixed, updated bootpack. 
      2019.02.22: Updated to 10.14.3. Fixed HDMI Audio by installing "FakePCIID_Intel_HDMI_Audio.kext" -> fixed freezing during boot. Fixed brightness levels by installing "AppleBacklightFixup.kext". Also updated bootpack & postinstall zip down in attachments.
      2019.01.21: Removed FakeSMC.kext, SMCHelper-64.efi, replaced by VirtualSMC.kext, VirtualSMC.efi because I got random freezes when booting system (kextd stall[0], (120s): 'AppleACPICPU' -> CPU is at 100%, fans are spinning fast), also updated bootpack in the attachments "acer_aspire_v591g-55tu_clover.zip" -> Freeze continued, brought back FakeSMC, deleted VirtualSMC (caused BT crashes).
      2019.01.18: HDMI Audio is fixed, I didn't do anything HDMI Audio is not fixed, sometimes it worked but most likely not. (no idea why)
      2018.12.09: Updated to 10.14.2 -> did without any complication
      2018.11.28: Fixed combo-jack garbage sound output by installing ALCPlugFix and CodecCommander.kext
      2018.11.01: Updated to 10.14.1 -> HDMI & VGA ports are gone again. -> Fixed by "AppleIntelSKLGraphicsFramebuffer.kext" rollback from 10.14.
      2018.09.28: Updated to Mojave 10.14 -> Fixed HDMI & VGA Outputs by adding "AppleGraphicsDevicePolicy.kext" patches to config.plist, HDMI audio not working
    • By MaLd0n
      ---TUTORIAL---

      https://olarila.com/forum/viewtopic.php?f=50&t=8685
       
      --Original Post--
       
      https://olarila.com/forum/viewtopic.php?f=97&t=11237
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://olarila.com/forum/download/file.php?id=24376
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By e97
      HackPro X99 System
      Until Apple blesses us with the MacPro7,1 – this is for those that require tools to do their work.
      An appropriate bicycle for the mind.
       
       

       

       

       
      Specs:
       
      CPU: Intel Xeon E5-2678 v3 (12 core, 2.5 GHz / 3.3 GHz Boost)
      Motherboard: SZMZ X99-8D3
      RAM: 16GB DDR3-14900R 1866Mhz ECC RDIMM modules
      GPU: Radeon RX Vega 64 8GB
      Storage: Phison E12 m.2 NVMe PCI-E 3.0 x4 SSD
      Water blocks: BARROW CPU + GPU
      Radiator: 360mm x 25mm slim
      Pump: DDC
       
      Case dimensions: 431 mm x 342 mm x 177 mm
       
       
       
      XCPM OFF
       

       
      XCPM ON
       

       
      OpenCL
       

       
       
       
      iMacPro1,1
       

       
       

       
      OpenCL
       

       
       
      NVMe
       

       
       
      Win 10 x64 v1809
       
      AIDA64 - Cache & Memory
       

       
       
      EFI-Clover-X99.zip
       
       
       
       
       
       
      Anyone else I forgot
       
       
×