Jump to content
ErmaC

Clover General discussion

21,150 posts in this topic

Recommended Posts

Even without FSInject or SMCHelper in drivers64 (and obviously not in driver64UEFI, I have nothing in there), FakeSMC and realtekALC audio drivers both load just fine without them.

Share this post


Link to post
Share on other sites
Advertisement

 

4 hours ago, pkdesign said:

Even without FSInject or SMCHelper in drivers64 (and obviously not in driver64UEFI, I have nothing in there), FakeSMC and realtekALC audio drivers both load just fine without them.

What could we say w/o any log? Perhaps, your Blah blah blah kexts are installed on LE/SLE and not \efi\clover\kext\xxxxx..?

#AFAICT FakeSMC is still working (just working) with no SMCHelper*.efi.. not really sure if you'll get problem with iCould, iMessage etc.

 

 

#̶L̶o̶L̶.̶.̶ ̶I̶ ̶p̶r̶o̶p̶o̶s̶e̶ ̶f̶o̶r̶ ̶n̶e̶x̶t̶ ̶C̶l̶o̶v̶e̶r̶ ̶p̶a̶c̶k̶a̶g̶e̶ ̶r̶e̶l̶e̶a̶s̶e̶ ̶t̶o̶ ̶n̶o̶t̶ ̶i̶n̶c̶l̶u̶d̶e̶ ̶a̶n̶y̶ ̶i̶t̶e̶m̶'̶s̶ ̶"̶D̶e̶s̶c̶r̶i̶p̶t̶i̶o̶n̶"̶ ̶s̶i̶n̶c̶e̶,̶ ̶u̶s̶e̶r̶s̶ ̶d̶i̶d̶n̶'̶t̶ ̶e̶v̶e̶n̶ ̶r̶e̶a̶d̶ ̶t̶h̶a̶t̶ ̶h̶a̶h̶ ̶h̶a̶a̶.̶

Screenshot 2.png

Edited by Badruzeus

Share this post


Link to post
Share on other sites

Badruzeus:

 

I truly do not appreciate the tone of your post. I have been hackintoshing for well over 10 years and know a little about what I'm doing. I've successfully built at least three hackintoshes over the years.

 

No, I do not have a anything in L/E or S/L/E from any other install. The only place FakeSMC is located is in the Other folder of the Clover EFI folder. All of my relevant/needed kexts are there.

 

If you would like to see logs I can certainly provide them. Preboot is attached to this post. You just have to ask, and since I wasn't having a problem, just an inquiry, I didn’t think I needed to provide any.

 

The point in my post is REGARDLESS of what the description says in the install, my machine boots successfully whether or not I had the "blah, blah, blah" kexts installed. And yes, iCloud, Messages, FaceTime all work either way as well. That's I wondered what was the purpose of them are.

 

And as for the other question about BIOS drivers, it looks like your installer doesn’t  show or provide them (unless they are not on the screenshot). Below is the default selections when you first click on customize. You can see that no BIOS driver is selected but UEFI drivers are. Even though this is a legacy mobo.

 

24237038_ScreenShot2019-02-04at9_33_18PM.jpg.fb08ff19872f48255dd81ab663330c12.jpg

 

I suggest you think about how you respond to posts and questions and try to be a little more respectful. In all the years I have been on these forums, no one has responded in such a disrespectful way.

prebootlog.txt

Edited by pkdesign

Share this post


Link to post
Share on other sites
1 hour ago, pkdesign said:

I truly do not appreciate the tone of your post. I have been hackintoshing for well over 10 years and know a little about what I'm doing. I've successfully built at least three hackintoshes over the years.

Well yeah, you took it too... seriously #LoL..  just take it easy. OK?

 

10 hours ago, pkdesign said:

Maybe I missed it but can someone explain the need for FSInject and SMCHelper? I forgot to install them the last time and my machine boots and works just fine? Are they unnecessary for non-UEFI mobos? Or is it just not needed for High Sierra?

There're Descriptions on Clover installer, but devs maybe could explain them better.

Uhmmb, thanks for the log.. it said that FSInject & SMCHelper are loaded on your Legacy mach:

1:703  0:000  Starting Clover revision: 4871 on CLOVER EFI
1:791  0:000  Loading FSInject-64.efi  status=Success
1:791  0:000  Loading SMCHelper-64.efi  status=Success
12:178  0:000  Beginning FSInjection
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: CF3F9398
FSInjectionInstall ...
- Our FSI_SIMPLE_FILE_SYSTEM_PROTOCOL installed on handle: CF3F9398
12:179  0:001  ** Warning: Your MLB is not suitable for iMessage(must be 17 chars long) !
12:179  0:000  Use origin smbios table type 1 guid.
12:179  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
12:179  0:000  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_SMMSensors.kext (v.1800)
12:192  0:012  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_LPCSensors.kext (v.1800)
12:204  0:011  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_GPUSensors.kext (v.1800)
12:213  0:008  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_CPUSensors.kext (v.1800)
12:222  0:009  Extra kext: EFI\CLOVER\kexts\Other\realtekALC.kext (v.1.0)
12:227  0:005  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext (v.1800)
12:237  0:009  Extra kext: EFI\CLOVER\kexts\Other\FakeSMC_ACPISensors.kext (v.1800)
12:246  0:009  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.13

..and you're right, FakeSMC & realtekALC are located on ..\kexts\Other (not LE/SLE).

For a test, remove ..\drivers64\FSInject.efi and also rebuild prelinkedkernel & kernelcache on System; you could answer the question your self then. On my case with Legacy & UEFI; they're still needed (if my Blah blah blah kexts that I want to load; are located on ..\efi\clover\kexts\...) #CMIIW.

 

1 hour ago, pkdesign said:

And as for the other question about BIOS drivers, it looks like your installer doesn’t  show or provide them (unless they are not on the screenshot).

Yep, on my case "Clover for UEFI booting only" option is selected, so "BIOS Drivers" are hidden. I still need them when booting on Legacy mode #BTW (with UEFI unchecked).

 

1 hour ago, pkdesign said:

I suggest you think about how you respond to posts and questions and try to be a little more respectful. In all the years I have been on these forums, no one has responded in such a disrespectful way.

I respect your post on the contrary. Ah OK, nice suggestions.. I think we have different moods  #ATM, or perspective.. not sure. What I could say is; there was misunderstanding about something so.. sorry for that. Keep hacking.

 

#EDIT: Honestly, I planned to remove my prev. post.. but I just realized that you've QUOTEd it before this one so.. #nevermind, I'll let ppl know my mistake then.. no worry.

Edited by Badruzeus

Share this post


Link to post
Share on other sites

So i'm not sure where to post this but it may be clover related.

I am hoping the screen says what it needs too, iStat menus and IPG are both showing different CPU frequencies and i'm not sure why.

2008850902_ScreenShot2019-02-05at7_41_34pm.thumb.png.9be25d5d37f099e30c431f737b9a203e.png

Also with corsair iCue running IPG gets pinned at 4ghz while iStat shows differently.

1727277581_ScreenShot2019-02-05at7_49_04pm.thumb.png.6f1fc3dbb34a469c84184078f4d80c16.png

Is this all cosmetic or do i have an issue?

runme.app files attached.

Send me iMac.zip

Share this post


Link to post
Share on other sites
12 hours ago, Badruzeus said:

Well yeah, you took it too... seriously #LoL..  just take it easy. OK?

 

I respect your post on the contrary. Ah OK, nice suggestions.. I think we have different moods  #ATM, or perspective.. not sure. What I could say is; there was misunderstanding about something so.. sorry for that. Keep hacking.

 

#EDIT: Honestly, I planned to remove my prev. post.. but I just realized that you've QUOTEd it before this one so.. #nevermind, I'll let ppl know my mistake then.. no worry.

Not a problem. Clearly a misunderstanding and miscommunication. ^_^

Share this post


Link to post
Share on other sites
On 2/4/2019 at 5:27 PM, pkdesign said:

Maybe I missed it but can someone explain the need for FSInject and SMCHelper? I forgot to install them the last time and my machine boots and works just fine? Are they unnecessary for non-UEFI mobos? Or is it just not needed for High Sierra?

 

Also, not sure if this is really a needed fix but...when I got to install Clover, UEFI drivers are check by default and no BIOS drivers are checked even though the installer has "Clover EFI 64-bits BiosBlockIO" checked by default. So I assume the installer knows this is a legacy BIOS install.

 

I always have to uncheck the UEFI drivers and check the BIOS drivers I need.

FSInject used for Clover feature ForceInjectKext which allows to load system kexts like for exmaple AMD9000Controller even if it not matched the card. I am not sure if it is still necessary.

SMCHelper keeps some SMC keys left by FakeSMC to be used by boot.efi in case of Hibernation or FileVault2. Other cases SMC not used.

If you use VirtualSMC.kext then you have to replace SMCHelper.efi to VirtualSMC.efi which does the same but in pair with own kext.

 

On 2/5/2019 at 9:21 AM, SavageAUS said:

So i'm not sure where to post this but it may be clover related.

I am hoping the screen says what it needs too, iStat menus and IPG are both showing different CPU frequencies and i'm not sure why.

 

Also with corsair iCue running IPG gets pinned at 4ghz while iStat shows differently.

 

Is this all cosmetic or do i have an issue?

runme.app files attached.

Send me iMac.zip

I think IPG is right.

Share this post


Link to post
Share on other sites
I think IPG is right.

Are you able to check my files and tell me if everything is ok?

 

Also with plugintype = true on my laptop my graphics runs at .55 instead of .20 even at idle is this by design of the plugintype setting?

 

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

I had an interesting thing happen to me. Wondering if anyone else has this issue or cares to test. I am using Goldfish's implementation of the boot chime.

 

I needed to boot into the Recovery partition of my drive (as well as a DriveWarrior boot USB). When I selected either of those drives at Clover GUI, I got the "red screen of death" immediately. I had seen that before while testing the chime. I realized that I could only boot into the main boot drive of my system.

 

So i deleted AudioDxe.efi and BootChimeDxe.efi from Clover drivers64 folder and then had no problems booting into any drive attached to my computer.

Share this post


Link to post
Share on other sites
10 hours ago, pkdesign said:

I had an interesting thing happen to me. Wondering if anyone else has this issue or cares to test. I am using Goldfish's implementation of the boot chime.

 

I needed to boot into the Recovery partition of my drive (as well as a DriveWarrior boot USB). When I selected either of those drives at Clover GUI, I got the "red screen of death" immediately. I had seen that before while testing the chime. I realized that I could only boot into the main boot drive of my system.

 

So i deleted AudioDxe.efi and BootChimeDxe.efi from Clover drivers64 folder and then had no problems booting into any drive attached to my computer.

So I have a question. If you install back AudioDxe.efi from Clover package and not BootChimeXXX will you have a problem with recovery?

20 hours ago, SavageAUS said:

Are you able to check my files and tell me if everything is ok?

 

Also with plugintype = true on my laptop my graphics runs at .55 instead of .20 even at idle is this by design of the plugintype setting?

 

Sent from my iPhone using Tapatalk

Plugin-type produces the difference what method for speedstep will be used. By Apple...kext or by xcpm in kernel.

I will not reproduce your result because I have no iStat and no wish to acquire it. I am using HWMonitorSMC2 by Vector_Sigma and I know it shows the same result as IPG.

Share this post


Link to post
Share on other sites
Plugin-type produces the difference what method for speedstep will be used. By Apple...kext or by xcpm in kernel.

I will not reproduce your result because I have no iStat and no wish to acquire it. I am using HWMonitorSMC2 by Vector_Sigma and I know it shows the same result as IPG.

Slice i got new problem, i used Clover r4871

 

1. If i boot from Clover and select windows, then My High Definition Audio Controller get "!" mark. "This device cannot start". And my internal speaker won't work, just Hdmi. No playback output device for my Onboard audio. But,

 

2. If i boot from "Windows boot manager" then Audio is working normally.

 

Boot to linux and mac/hackintosh from Clover have good audio (no problem).

 

What's file or log should i upload???

 

Sent from my Mi Note 2 using Tapatalk

 

 

 

Share this post


Link to post
Share on other sites

Update :

Try to delete AudioDxe.efi and it working fine when boot to windows.

And i try to use AudioDxe-64.efi from Clover Package and problem back again.

AudioDxe.efi from clover package or GoldFish64 can cause this issue with uefi boot. Maybe it can cause by clover too, idk. I am not expert in c++

Sent from my Mi Note 2 using Tapatalk

Share this post


Link to post
Share on other sites

Update :

Try to use AudioDxe-64.efi (from Clover Package) / AudioDXE.efi (Goldfish64) with PlayAsync = False. Then Audio Controller in windows work again (boot windows from GUI CLOVER).

If i set PlayAsync = True then Audio Controller in windows broken again.

Thanks you

Sent from my Mi Note 2 using Tapatalk

Share this post


Link to post
Share on other sites

Update :

Use AudioDXE from Clover Package or GoldFish64 with PlayAsync = True, but i am waiting until audio sound is finish played. Then boot into windows and audio controller is work normally, BUT

If i press enter in windows before audio playback finish (immediately press enter in Windows partition) then audio controller is broken)

I used sound.wav and sound_night.wav with 40 seconds durations (it'just for fun).

Thank you

Sent from my Mi Note 2 using Tapatalk
 

Edited by Andres ZeroCross

Share this post


Link to post
Share on other sites
2 minutes ago, Slice said:

May be there is a way to reset hda controller in windows?

And yes, it will be good to make SoundStop before boot windows.

I don't know how to reset HDA Controller in Windows :D

But i will take "make SoundStop before boot windows" as my temporary solution :)

Share this post


Link to post
Share on other sites
13 minutes ago, Badruzeus said:

Sorry @Slice can you provide prebuilt Clover binaries?

 

 

  Reveal hidden contents

 

 


Screenshot 5.png
 

 

 

I can't built it,, always failed with Clobber (it works until r4871) :D

Can you upload prebuilt ones r4874  @Badruzeus ???

Edited by Andres ZeroCross

Share this post


Link to post
Share on other sites

@Badruzeus in case you need a build for testing, here's 4874. I don't really need it for myself. Just built it for you guys so you can test.

 

Edit: removed attachment since it might have been broken.

 

Edited by arsradu

Share this post


Link to post
Share on other sites

Nope, still broken. I immediately press enter in Windows partiton before sound finish playing. And jf i reboot to mac (without shutdown, then my Hackintosh wont get any audio device except HDMI Onesf88848866e669342331509e366462a2c.jpg&key=f97aeb2113b82ca332d1a64eaa3be89e8c427235f848c83025b83a0933ccbf28dcf95b68ec8b83730912c337a9f01993.jpg&key=1b95a25f7fc113ab325740a3cffda27b4d1fd831bb55cbe823c26a87a19496b7

 

Sent from my Mi Note 2 using Tapatalk

 

 

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By rodrinico19
      Hola a todos, primero que nada estoy muy contento de a ver econtrado un foro de español sobre hackintosh.
      Mi problema consesite en que descargue unos drivers de esta pagina: https://github.com/chris1111/Wireless-USB-Adapter-Clover
      Seguí los pasos instale los kets en la carpeta EFI/CLOVER/OTHERS todo tal cual como dice ahi la instalación. luego segui los pasos de configurar la red dentro de configuracion del sistema etc.
      Lo cual el nombre me quedo en en0.
      El driver o kets funciona bien es reconocible por el S.O de hecho conecta la red, pero me dice que no tiene IP AUTO ASIGNADA Y LA OTRA QUE HAY UNA DESCONEXION A CADA RATO(como que desconectaras y conectaras el dispositvo usb a cada rato)
      Me gustaria que me ayuden con eso si es posible, Muchas Gracias!!
    • By Klaidonis
      I am making a minimal Clover build for the fastest boot possible with the boot6 file in legacy mode.
      While looking at the preboot.log, I noticed that there is a line without explanation (at 0:892). Apparently, whatever it is, the execution time of it is close to 2 seconds, more than 55% of the total logged boot time in the current configuration. This does not change whether I use USB 2 or USB 3 port.
       
      Is there a way to eliminate or speed up the above? Also, is there anything else you can suggest to improve the performance based on the below log file? Which moment in the boot process corresponds to the start time in preboot.log?  
      The last thing I would like to understand is the delay/timeout after the boot6 file has loaded, and the number 6 disappears from the screen. For about 2 seconds or slightly less, I can press any key, and then it will enter the BIOS-like interface from the boot6 file. Without further knowledge, it seems like those 2 seconds are just delay time, and only after that is CLOVERX64.efi actually started, which, I presume, is approximately when the preboot.log timer starts. So, if the aforementioned is correct, can I get rid of this delay as well? Note that I am using the boot1f32 file to chain-load boot6, which does not include the initial 2-second wait period for a keypress.
       
      === preboot.log ===
      0:100 0:100 MemLog inited, TSC freq: 2394459554 0:100 0:000 CPU was calibrated with ACPI PM Timer 0:100 0:000 LegacyRegion2: Chipset/proc: 0x0A048086 0:100 0:000 Next Generation Core processors (PAM 0x80-0x86) 0:100 0:000 Test PAM1=(0x41=90, 0x5a=90, 0x81=11, 0x91=00) at chipset 0A048086 0:100 0:000 , Install = Success 0:112 0:012 BiosVideoDriverBindingStart! 0:112 0:000 BiosVideoCheckForVbe 0:112 0:000 EdidOverride not found 0:121 0:009 Edid1+ 0:121 0:000 found Detail Timing 1920x1080 0:121 0:000 timing string after 0xFE:AUO 0:121 0:000 timing string after 0xFE:B156HAN01.2 0:122 0:000 0 1280x1024 attr=9B - ok, edid- 0:122 0:000 1 1024x768 attr=9B - ok, edid-, 1024x768, working, highest, pref=1 0:122 0:000 2 640x480 attr=9B - ok, edid-, 640x480, working 0:122 0:000 3 800x600 attr=9B - ok, edid-, 800x600, working 0:123 0:000 4 1920x1080 attr=9B - ok, edid+, working, highest, pref=4 0:123 0:000 BV new mode: 4 1920x1080 0:398 0:275 SetMode pref 4 (4) = Success 0:892 0:493 VGA Pci.Hdr.Command=6 - not enabled 2:623 1:731 2:623 0:000 Now is 21.02.2020, 13:03:21 (GMT) 2:623 0:000 Starting Clover revision: 5103 (master, commit 3f3b85da0) on CLOVER EFI 2:623 0:000 Build with: [Args: -D NO_GRUB_DRIVERS_EMBEDDED -t GCC53 | -D NO_GRUB_DRIVERS_EMBEDDED --conf=/Users/sergey/src/CloverHackyColor/Conf -D USE_LOW_EBDA -a X64 -b RELEASE -t GCC53 -n 5 | OS: 10.14.6] 2:623 0:000 SelfDevicePath=PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) @940C9698 2:623 0:000 SelfDirPath = \EFI\CLOVER 2:623 0:000 SimpleTextEx Status=Success 2:623 0:000 === [ Get Smbios ] ======================================== 2:623 0:000 Type 16 Index = 0 2:623 0:000 Total Memory Slots Count = 2 2:623 0:000 Type 17 Index = 0 2:623 0:000 SmbiosTable.Type17->Speed = 1600MHz 2:623 0:000 SmbiosTable.Type17->Size = 4096MB 2:623 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 DIMM0 2:623 0:000 SmbiosTable.Type17->Vendor = Hynix 2:623 0:000 SmbiosTable.Type17->SerialNumber = 00000000 2:623 0:000 SmbiosTable.Type17->PartNumber = HMT451S6MFR6A-PB 2:623 0:000 Type 17 Index = 1 2:623 0:000 SmbiosTable.Type17->Speed = 1600MHz 2:623 0:000 SmbiosTable.Type17->Size = 8192MB 2:623 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 DIMM1 2:623 0:000 SmbiosTable.Type17->Vendor = Kingston 2:623 0:000 SmbiosTable.Type17->SerialNumber = 5A060A8A 2:623 0:000 SmbiosTable.Type17->PartNumber = KHX1600C9S3L/8G 2:623 0:000 Boot status=0 2:623 0:000 Running on: 'Aspire V5-573G' with board 'Dazzle_HW' 2:623 0:000 === [ GetCPUProperties ] ================================== 2:623 0:000 CPU Vendor = 756E6547 Model=40651 2:623 0:000 The CPU supported SSE4.1 2:623 0:000 BrandString = Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz 2:623 0:000 The CPU supported turbo 2:623 0:000 MSR 0x35 20004 2:623 0:000 MSR 0xE2 before patch 1E008405 2:623 0:000 MSR 0xE2 is locked, PM patches will be turned on 2:623 0:000 MSR 0xCE 0008083D_F3011800 2:623 0:000 corrected FLEX_RATIO = 0 2:623 0:000 MSR 0x1B0 00000000 2:623 0:000 FSBFrequency = 71 MHz, DMI FSBFrequency = 100 MHz, Corrected FSBFrequency = 100 MHz 2:623 0:000 MaxDiv/MinDiv: 24.0/8 2:623 0:000 Turbo: 27/27/27/30 2:623 0:000 Features: 0xBFEBFBFF 2:623 0:000 Threads: 4 2:623 0:000 Cores: 2 2:623 0:000 FSB: 100 MHz 2:623 0:000 CPU: 1700 MHz 2:623 0:000 TSC: 1700 MHz 2:623 0:000 PIS: 100 MHz 2:623 0:000 ExternalClock: 25 MHz 2:623 0:000 === [ GetDevices ] ======================================== 2:623 0:000 GOP found at: PcieRoot(0x0)/Pci(0x2,0x0)/AcpiAdr(0x80010100) 2:623 0:000 PCI (00|00:00.00) : 8086 0A04 class=060000 2:623 0:000 PCI (00|00:02.00) : 8086 0A16 class=030000 2:623 0:000 - GOP: Provided by device 2:623 0:000 - GFX: Model=Intel HD Graphics 4400 (Intel) 2:623 0:000 PCI (00|00:03.00) : 8086 0A0C class=040300 2:623 0:000 PCI (00|00:14.00) : 8086 9C31 class=0C0330 2:623 0:000 PCI (00|00:16.00) : 8086 9C3A class=078000 2:623 0:000 PCI (00|00:1B.00) : 8086 9C20 class=040300 2:623 0:000 PCI (00|00:1C.00) : 8086 9C10 class=060400 2:623 0:000 PCI (00|00:1C.02) : 8086 9C14 class=060400 2:623 0:000 PCI (00|04:00.00) : 168C 0034 class=028000 2:623 0:000 - WIFI: Vendor=Atheros 2:623 0:000 PCI (00|00:1C.03) : 8086 9C16 class=060400 2:623 0:000 PCI (00|05:00.00) : 10EC 5287 class=FF0000 2:623 0:000 PCI (00|05:00.01) : 10EC 8168 class=020000 2:623 0:000 - LAN: 0 Vendor=Realtek 2:623 0:000 PCI (00|00:1C.04) : 8086 9C18 class=060400 2:624 0:000 PCI (00|01:00.00) : 10DE 0FE4 class=030200 2:624 0:000 PCI (00|00:1D.00) : 8086 9C26 class=0C0320 2:624 0:000 PCI (00|00:1F.00) : 8086 9C43 class=060100 2:624 0:000 PCI (00|00:1F.02) : 8086 9C03 class=010601 2:624 0:000 PCI (00|00:1F.03) : 8086 9C22 class=0C0500 2:624 0:000 === [ GetDefaultSettings ] ================================ 2:624 0:000 Clover load options size = 0 bytes 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G--00-00-00-00-00-00. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Aspire V5-573G-1700. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Dazzle_HW. Dir not exists 2:624 0:000 CheckOEMPathExists tried EFI\CLOVER\OEM\Dazzle_HW-1700. Dir not exists 2:624 0:000 set OEMPath by default: EFI\CLOVER 2:637 0:012 EFI\CLOVER\config.plist loaded: Success 2:637 0:000 === [ GetListOfThemes ] =================================== 2:637 0:000 === [ Found config plists ] =============================== 2:637 0:000 - config.plist 2:637 0:000 === [ GetEarlyUserSettings ] ============================== 2:637 0:000 timeout set to 0 2:637 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0) 2:637 0:000 Default theme: embedded 2:637 0:000 === [ LoadDrivers ] ======================================= 2:637 0:000 === [ InitScreen ] ======================================== 2:637 0:000 Console modes reported: 4, available modes: 2:637 0:000 - [01]: 80x25 2:637 0:000 - [02]: 80x50 2:637 0:000 - [03]: 100x31 2:637 0:000 - [04]: 240x56 (current mode) 2:637 0:000 SetScreenResolution: 1920x1080 - already set 2:637 0:000 SetScreenResolution: 1920x1080 - already set 2:637 0:000 reinit: self device path=PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) 2:637 0:000 === [ GetMacAddress ] ===================================== 2:637 0:000 === [ ScanSPD ] =========================================== 2:637 0:000 Scanning SMBus [8086:9C22], mmio: 0xB3619004, ioport: 0x5040, hostc: 0x1 2:656 0:018 Slot: 2 Type 24 8192MB 1600MHz Vendor=Kingston PartNo=KHX1600C9S3L8G SerialNo=050A0006000A080A 2:657 0:000 === [ GetAcpiTablesList ] ================================= 2:657 0:000 Get Acpi Tables List from RSDT: 2:657 0:000 - [00]: FACP ACRPRDCT len=268 2:657 0:000 - [01]: UEFI ACRPRDCT len=566 2:657 0:000 - [02]: FPDT ACRPRDCT len=68 2:657 0:000 - [03]: ASF! ACRPRDCT len=165 2:657 0:000 - [04]: HPET ACRPRDCT len=56 2:657 0:000 - [05]: APIC ACRPRDCT len=140 2:657 0:000 - [06]: MCFG ACRPRDCT len=60 2:657 0:000 - [07]: BOOT ACRPRDCT len=40 2:657 0:000 - [08]: LPIT ACRPRDCT len=148 2:657 0:000 - [09]: ASPT ACRPRDCT len=52 2:657 0:000 - [10]: DBGP ACRPRDCT len=52 2:657 0:000 - [11]: SSDT ACRPRDCT len=1337 2:657 0:000 - [12]: SSDT ACRPRDCT len=2776 2:657 0:000 - [13]: SSDT ACRPRDCT len=12013 2:657 0:000 - [14]: SSDT ACRPRDCT len=11433 2:657 0:000 - [15]: SSDT ACRPRDCT len=2230 2:657 0:000 Calibrated TSC Frequency = 2394459554 = 2394MHz 2:657 0:000 === [ GetUserSettings ] =================================== 2:657 0:000 === [ Found DSDT tables ] ================================= 2:657 0:000 === [ ScanVolumes ] ======================================= 2:657 0:000 Found 8 volumes with blockIO 2:657 0:000 - [00]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0) 2:659 0:001 Result of bootcode detection: bootable Linux (grub,linux) 2:659 0:000 - [01]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0) 2:660 0:001 Result of bootcode detection: bootable unknown (legacy) 2:660 0:000 - [02]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(1,GPT,8017BD66-1E24-4B31-8E09-BC49BECD6CC4,0x800,0x21330000) 2:661 0:001 Result of bootcode detection: bootable Windows (vista,win) 2:661 0:000 - [03]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(2,GPT,82F3B738-65E9-458E-B2F1-BB55D4F00885,0x21331000,0x3D0800) 2:663 0:001 - [04]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(3,GPT,E701DCD8-E3C5-4BFA-B61B-BFF4D80153FD,0x21701800,0x18C4F000) 2:664 0:001 - [05]: Volume: PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0x0,0x0)\HD(4,GPT,4DB1239A-A9D7-4045-A162-7EF1B3A5913B,0x3A350C21,0x3A3B616E) 2:665 0:001 Result of bootcode detection: bootable Windows (vista,win) 2:665 0:000 - [06]: Volume: PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0) 2:677 0:011 Result of bootcode detection: bootable unknown (legacy) 2:677 0:000 USB volume 2:677 0:000 USB volume 2:677 0:000 - [07]: Volume: PcieRoot(0x0)\Pci(0x1D,0x0)\USB(0x0,0x0)\USB(0x4,0x0)\HD(1,MBR,0x04944021,0x3F,0x3BC1042) 2:688 0:011 Result of bootcode detection: bootable unknown (legacy) 2:688 0:000 USB volume 2:688 0:000 USB volume 2:688 0:000 This is SelfVolume !! 2:688 0:000 PutNvramPlistToRtVars: nvram.plist not found 2:689 0:000 No AudioIoProtocols, status=Not Found 2:689 0:000 === [ InitTheme ] ========================================= 2:689 0:000 use daylight theme 2:689 0:000 using embedded theme 2:689 0:000 got embedded sound 2:689 0:000 Channels: 2 Sample rate: 8000 Hz Bits: 16 2:689 0:000 output to channel 0 with volume 70, len=25600 2:689 0:000 sound channels=2 bits=16 freq=8000 2:689 0:000 sound converted to 48kHz 2:689 0:000 not found AudioIo to play 2:689 0:000 sound play end with status=Not Found 2:690 0:001 Using embedded font: Success 2:691 0:000 theme inited 2:691 0:000 Chosen embedded theme 2:691 0:000 after NVRAM boot-args= 2:691 0:000 === [ Dump SMC keys from NVRAM ] ========================== 2:691 0:000 no AppleSMC protocol 2:691 0:000 Entry scan disabled 2:691 0:000 === [ AddCustomTool ] ===================================== 2:692 0:000 === [ GetEfiBootDeviceFromNvram ] ========================= 2:692 0:000 Default boot entry not found 2:692 0:000 DefaultIndex=-1 and MainMenu.EntryCount=4 2:973 0:281 GUI ready  
    • By Jancey
      I used this command: diskutil info disk0s2 | grep -i "Partition UUID" | rev | cut -d' ' -f 1 | rev

      But I accidentally removed the wrong disk and now my main windows drive is not appearing in the bootloader. I can't figure out how to get it back. I tried resetting my windows drive, but I kept getting an error. I also reset my mac and reinstalled Catalina.
    • By gengstapo
      @Hervé
       
      Im having similar issue with my HS setup, dell latitute 3480, i5-7200U
      Once the hdmi plugged in, the laptop display went blank, only could see the external tv
      But, when i put my laptop to sleep & wake up again, both screen got display (hdmi still connected)
      Even the hdmi could be plugged off & in (after sleep), the laptop display is fine
       
      What could be the culprit?
      Dell’s MacBook Pro IORegistry.zip
      config.plist.zip
    • By TomZanna
      Hi, I'm trying to install Mac Os Catalina on a HP 550-132NL.
      The system has:
      i7-6700
      RAM 12 GB
      GT 730
      LAN Realtek RTL8161
      ALC3863
       
      It passes the verbose phase but after the Apple logo goes away, it gets stuck on a grey screen and I can only move the pointer.
      Can I try to boot with the iGPU?
       
      origin.zip
      CLOVER_dGPU_USB_3.zip
×