Jump to content
ErmaC

Clover General discussion

20,933 posts in this topic

Recommended Posts

You have to comment out the line as mentioned on the previous page and then compile, I guess this will be fixed in a future build.

 

 

Edited by D-an-W

Share this post


Link to post
Share on other sites
Advertisement
3 hours ago, Slice said:

Congratulation! You have fine ear for music!

It is not a cat, this sound made by my daughter. :P

Another one

 

sound.wav 2.zip

 

I only got sound after press enter to my macOS partition, but there is no sound before GUI Clover. I put sound.wav and sound_night.wav in BGM_SVG theme folder. I used Clover r4836

image.thumb.png.cbd8e78e7c72cdc0057f455c337b52c1.png

 

 

Share this post


Link to post
Share on other sites

Update : try with CLOVER r4840 and result still same. Only sound after i press enter in macOS Partition (macOS Chime sound), but no sound before GUI Clover.

Here is the log (sound.wav and sound_night.wav are in BGM_SVG folder theme)

preboot.log

Share this post


Link to post
Share on other sites
2 hours ago, D-an-W said:

 

 

Regarding the AFTER Clover GUI sound, I still can't get the OS to boot if BootChimeDxe.efi is present in Drivers64UEFI but I do get the sound (Just no progress bar shows up).

BootChimeDxe is out of discussion here. I didn't make it and didn't recommend it.

Share this post


Link to post
Share on other sites
5 minutes ago, Slice said:

BootChimeDxe is out of discussion here. I didn't make it and didn't recommend it.

Why ? its part of Audiopkg 

No issue here using this drivers on drivers64

Edited by chris1111

Share this post


Link to post
Share on other sites
23 minutes ago, Slice said:

BootChimeDxe is out of discussion here. I didn't make it and didn't recommend it.

Is my *.wav audio config correct? Converting with VLC #btw

I uploaded them here (credits: Zedge, etc.)

Can't test them one by one, especially using VM (bcoz it sees no Audio Device detected, right?).

 

Screenshot 21.png

Share this post


Link to post
Share on other sites
11 minutes ago, Badruzeus said:

Is my *.wav audio config correct? Converting with VLC #btw

I uploaded them here (credits: Zedge, etc.)

Can't test them one by one, especially using VM (bcoz it sees no Audio Device detected, right?).

 

Screenshot 21.png

The config is correct at least it is the same as my.

My sound card supported 16bps/44100Hz and your?

Share this post


Link to post
Share on other sites
1 hour ago, Andres ZeroCross said:

Update : try with CLOVER r4840 and result still same. Only sound after i press enter in macOS Partition (macOS Chime sound), but no sound before GUI Clover.

Here is the log (sound.wav and sound_night.wav are in BGM_SVG folder theme)

preboot.log


Solved,, just set NVRAM Variables to YES in CLOVER Preferences. Then go to shell and config bootchimecfg.efi. And i must delete BootChimeDxe.efi to prevent hang on apple logo.

Play Async with true still very buggy,, audio stop after i press any key in CLOVER GUI.

Share this post


Link to post
Share on other sites
23 minutes ago, Slice said:

The config is correct at least it is the same as my.

My sound card supported 16bps/44100Hz and your?

I can hear all sample rate's Test from 44100-192000 Hz when running Windows with my Realtek ALC269-VB.

Is there any diff. on system preboot compared to running system on this case?

Speakers.png

Share this post


Link to post
Share on other sites

Hey @Slice, you missed one problem in 4840. I noted here you made a mistake in loading the sound 

If it's daylight, then the sound is not loaded because you are only checking for error which should not have happened unless night time sound was not found. Might I suggest you change to this:

    if (!DayLight) {
      Status = StartupSoundPlay(ThemeDir, L"sound_night.wav");
    }
    if (DayLight || EFI_ERROR(Status)) {
      Status = StartupSoundPlay(ThemeDir, L"sound.wav");
    }

 

EDIT: PS. Did anyone see that github now has unlimited private repositories? Is microsoft actually making something better?? Did I die like three years ago and now I'm in a weird simulation where they are keeping my brain alive as some sort of computational machine?

Edited by apianti

Share this post


Link to post
Share on other sites

@apianti

I mean that if daylight OR (SOUND_NIGHT IS NOT FOUND) then play sound.wav. For me it works tested day and night.

Some problems with allocated pools and opened protocols.

Share this post


Link to post
Share on other sites

So, with PlayAsync=true using r4840 I hear "\Theme Name\sound.wav" on Clover GUI loading.

It' s working, thanks @Slice but just.. when GUI appears, simultaneous wav sounds crappy (or buggy as what you said).

Share this post


Link to post
Share on other sites
1 hour ago, Slice said:

@apianti

I mean that if daylight OR (SOUND_NIGHT IS NOT FOUND) then play sound.wav. For me it works tested day and night.

Some problems with allocated pools and opened protocols.

 

Except this line breaks your assumption that Status is an error: https://sourceforge.net/p/cloverefiboot/code/HEAD/tree/rEFIt_UEFI/Platform/Settings.c#l4198. Which is why some users had crash in CheckSyncSound() because no AudioIo was ever set because StartupSoundPlay() isn't called if a raster theme is loaded successfully unless it's night time. As for the sound breaking when playing asynchronously it is because of this: https://sourceforge.net/p/cloverefiboot/code/HEAD/tree/Drivers/AudioDxe/HdaController/HdaControllerMem.c#l446. All the events in WaitForInputEventPoll() have the same tpl of TPL_NOTIFY meaning that the callback for the audio will not interrupt any of these. Try changing to TPL_HIGH_LEVEL and see if that gives correct results.

 

EDIT: Actually probably all driver events are TPL_NOTIFY, so probably every driver event is not interrupted like it should be to continue playing the sound.

Edited by apianti

Share this post


Link to post
Share on other sites

Now i test it again, use Clover r4840.

1. Delete BootChimeDxe.efi di Drivers64Uefi
2. Just use AudioDxe.efi in Drivers64UEFI
4. Set audio device from shell (There is sound when command applied)
5. Put sound wav and sound_night.wav in BGM_SVG folder

There is no sound before GUI CLOVER or in CLOVER (PlayAsync=False).

There is log "not found AudioIo" in preboot log.

Try reset Nvram (F11 in Gui clover), set from shell but no change

Thanks

 

c3f154f57065875d67e760d0844f853f.jpg

Sent from my Mi Note 2 using Tapatalk
 

preboot.log

Edited by Andres ZeroCross

Share this post


Link to post
Share on other sites
15 minutes ago, Andres ZeroCross said:
Now i test it again, use Clover r4840.

1. Delete BootChimeDxe.efi di Drivers64Uefi
2. Just use AudioDxe.efi in Drivers64UEFI
4. Set audio device from shell (There is sound when command applied)
5. Put sound wav and sound_night.wav in BGM_SVG folder

There is no sound before GUI CLOVER or in CLOVER (PlayAsync=False).

There is log "not found AudioIo" in preboot log.

Try reset Nvram (F11 in Gui clover), set from shell but no change

Thanks
 
c3f154f57065875d67e760d0844f853f.jpg&key=d5a2bb75ad7ad5876bef6ca9074dfbe9e4748188b0d818c49b9434edc869641d

Sent from my Mi Note 2 using Tapatalk
 
preboot.log


May sound silly but you are using the theme that you put the sound files on yeah?


Sent fr

Edited by SavageAUS

Share this post


Link to post
Share on other sites
3 minutes ago, SavageAUS said:


May sound silly but you are using the theme that you put the sound files on yeah?


Sent from my iPhone using Tapatalk
May sound silly but you are using the theme that you put the sound files on yeah?


Sent from my iPhone using Tapatalk


Yeah,,

Theme is loaded but sound = no

  

image.png

Share this post


Link to post
Share on other sites
43 minutes ago, Andres ZeroCross said:

Now i test it again, use Clover r4840.

1. Delete BootChimeDxe.efi di Drivers64Uefi
2. Just use AudioDxe.efi in Drivers64UEFI
4. Set audio device from shell (There is sound when command applied)
5. Put sound wav and sound_night.wav in BGM_SVG folder

There is no sound before GUI CLOVER or in CLOVER (PlayAsync=False).

There is log "not found AudioIo" in preboot log.

Try reset Nvram (F11 in Gui clover), set from shell but no change

Thanks

Sent from my Mi Note 2 using Tapatalk

 

This shows that there is just no audio io protocol installed on any of the devices, did you check to make sure you have nvram variables after configuring and restart?

 

EDIT: Nevermind, it wouldn't have gotten that far if they didn't exist. There should be a line that prints out the device path of the selected device, I bet it is being converted incorrectly so it doesn't match the one clover is using exactly.

EDIT2: Please run this command on your EFI partition and upload the file it generates:

dmpstore -all > nvram.txt

 

Edited by apianti

Share this post


Link to post
Share on other sites
 
This shows that there is just no audio io protocol installed on any of the devices, did you check to make sure you have nvram variables after configuring and restart?
 
EDIT: Nevermind, it wouldn't have gotten that far if they didn't exist. There should be a line that prints out the device path of the selected device, I bet it is being converted incorrectly so it doesn't match the one clover is using exactly.
Sorry, i am not sure how to check it?

Sent from my Mi Note 2 using Tapatalk

Share this post


Link to post
Share on other sites

Please run this command on your EFI partition and upload the file it generates:

dmpstore -all > nvram.txt
 
Edited by apianti

Share this post


Link to post
Share on other sites
23 minutes ago, apianti said:

This shows that there is just no audio io protocol installed on any of the devices, did you check to make sure you have nvram variables after configuring and restart?

 

EDIT: Nevermind, it wouldn't have gotten that far if they didn't exist. There should be a line that prints out the device path of the selected device, I bet it is being converted incorrectly so it doesn't match the one clover is using exactly.

If i use all the files from here, i have to rename sound.wav to sound_night.wav else no sound. but if i make my own sound.wav/sound_night.wav, i got no sound.

 

So maybe @apianti's EDIT: above make sense.

 

Share this post


Link to post
Share on other sites
10 minutes ago, cecekpawon said:

 

Yeah, that's why I wanted to see the variable value. I imagine he is still using the older version though, which could also have an issue with matching the string.

 

10 minutes ago, ellaosx said:

If i use all the files from here, i have to rename sound.wav to sound_night.wav else no sound. but if i make my own sound.wav/sound_night.wav, i got no sound.

 

So maybe @apianti's EDIT: above make sense.

 

 

These are unrelated problems. For the sound.wav to sound_night.wav, yes that is problem for raster theme as I posted before. For your own sounds, see here:

 

Edited by apianti

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By kingoffright
      Dear all,
       
      I have a external harddisk about 500GB, I installed the clover into it and the harddisk is GPT format, below is the 3 partitions details:
      FS01: EFI - disk0s1 - fat32
      FS02: install mac  image - disk0s2 -  hfs+
      FS03: install windows 10 - disk0s3 - fat32
       
      I can use this external harddisk to install Mac without issue, I use below steps to install windows 10
      enter the FS03:
      cd to efi/boot/ and excuete bootx64.efi
      after pop up the windows install screen, i click next and it shows error 'A media driver your computer needs is missing...' and the installation can not go any further.
      Firstly I use ultraiso to write the windows 10 image to a flash disk and no issue to start install window 10 so the image is working fine. Since I dont know how to write
      a wiindow installation image into harddisk partition, I used winrar extra all the files into disk0s3, am I missing some steps or actually clover not support to install windows
      by partitions, apprecating any helps.
       
    • By kushwavez
      Acer Aspire V15 V5-591G - Catalina 10.15.1
      This post will no longer updated, go for the osxlatitude link for further updates
      Original and updated link:
      https://osxlatitude.com/forums/topic/11355-acer-aspire-v-15-v5-591g-catalina-windows-10/
      (Note: mine is 55TU version, but the bootpack will work fine with another versions of 591G, for example: V5-591G-71K2, -764Z, -59PU, etc.)
      Specifications:
      - Motherboard: USOPP_SLS (Skylake-H PCH)
      - BIOS: Insyde Corp. v 1.15
      - CPU: Intel Core i5-6300HQ 2.3 GHz (Skylake)
      - GPU: NVIDIA GeForce GTX 950M 2 GB (Optimus) & Intel HD Graphics 530
      - RAM: SK hynix 4 GB DDR4 (Later I bought + KINGSTON 4 GB) 2133 MHz
      - WiFi + Bluetooth: Qualcomm Atheros QCNFA344A 5 GHz (Later -> Broadcom BRCM94352Z M.2 5 GHz WiFi + 4.0 Bluetooth)
      - Audio: Realtek HD Audio: ALC 255 
      - Ethernet: Realtek RTL8168/8111
      - Card Reader: Realtek USB 2.0 Card Reader (USB2.0-CRW)
      - Webcam: HD Webcam
      - HDD: TOSHIBA MQ01ACF032 320 GB HDD
      - SSD: SPCC M.2 230 GB SSD
      - Display: 1366x768 (15.6", Matte)
      - Battery: 6 cell 56Wh / 5040mAh
      - Connectors: 
      1x SD Card Reader 2x USB 3.0 (1x USB Charging), 1x USB 2.0 1x VGA 1x HDMI 1x 3.5mm microphone/audio combined jack connector 1x Ethernet (Rj-45) - Keyboard & Touchpad: Multi-Touch & Multi-gestures ELAN 501 Touchpad, Backlight Keyboard.
      Working:  
      - Wi-Fi (with BCM94352Z)
      - Bluetooth hand-off (With BCM94352Z)
      - Full Graphics enabled on HD 530: ig-platform-id: 0x191b0000 (HD 530 Mobile)
      - Display: if default colour profile is corrupted (blue is not actual blue but purplish) Use "Rec. ITU-R BT. 709-5" Color Profile (System Pref. -> Displays -> Color)
      - HDMI & VGA Outputs: AppleGraphicsDevicePolicy.kext Clover patch
      - Audio (ALC 255): (Internal Speakers, Internal Microphone, Headphone jack with AppleALC, ALCPlugFix -> layout-id=17)
      - Ethernet Realtek 8168/8111: RealtekRTL8111.kext
      - App Store, Messages, FaceTime, Siri, iCloud (native)
      - Integrated webcam (native)
      - 3.0 USB (native)
      - Touchpad and Keyboard (ELAN501): Fn keys are good, the weird thing is the Brightness key. On my keyboard it's Pause Break:Br-up, Fn+F12:Br-dwn-> To fix this try Karabiner (VoodoPS2Controller.kext), - for gestures try SmartTouchpad drivers
      - Battery info: Install ACPIBatteryManager.kext with Kext Utility or other installer.
      - Sleep Mode
      - SSD with TRIM enabled (to enable trim, open Terminal and write "sudo trimforce enable")
      Not working:
      - Original Wi-Fi (Qualcomm Atheros QCNFA344A):  unsupported, you need switch to BCM94352Z or just use a mini usb wifi dongle.
      - NVIDIA GeForce GTX 950M: Optimus not supported.
      - Card Reader: Unsupported -> Can't really fix because I don't have any SD Card at the moment, maybe can be fixed by adding Prod & Ven IDs to AppleStorageDevices.kext, I never used it anyway. name: "USB2.0-CRW" Prod ID: "0x0129" Ven ID: "0x0bda  (Realtek Semiconductor Corp.)"
      For Wi-Fi:
      - 1st method: You can choose an external USB wifi dongle (I used TP-Link Archer T1U (5GHz support), TP-Link has official macOS drivers, you just need to install it
      - 2nd and I think the best method: Replace your M.2 Qualcomm Card with a compatible BCM94352Z card (you will have hand-off Bluetooth too), just install the kexts (enabled with BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakePCIID.kext, FakePCIID_Broadcom_WiFi.kext, they're all in my attached zip). You could buy this card from ebay, aliexpress, or amazon
       
      Issues:
      - None
      BIOS Settings:
      - BIOS version 1.15 (irrelevant)
      - Secure Boot: Disabled
      - Touchpad: Advanced
      - Boot mode: UEFI
      Getting ready for Installation:
      - Download the Catalina install zip (bootpack & postinstall): acer_aspire_V591G-55TU_cata.zip
      Installation:
      - Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager)
      - Copy my Clover folder to the USB's EFI folder
      - Boot with the Installer USB
      - If you stuck in boot, reboot and in the Clover bootloader select "config_debug.cfg" -> you'll have more informations about the freeze
       
      Please open the README.rtf in my install zip for more informations about the USB Installer & Post installation!
      On Catalina the System folder is read-only, so you need to remount in rw to modify System/Library. 
      If you have a single RAM and getting panic at boot, then you need to edit the "config.plist" with these (SMBIOS->after "Version 1.0"):
      ->Edit "Frequency" and "Size" to match your RAM values
      <key>Version</key> <string>1.0</string> <key>Memory</key> <dict> <key>Channels</key> <integer>1</integer> <key>SlotCount</key> <integer>1</integer> <key>Modules</key> <array> <dict> <key>Slot</key> <integer>0</integer> <key>Size</key> <integer>8192</integer> <key>Frequency</key> <integer>2133</integer> <key>Type</key> <string>DDR4</string> </dict> </array> </dict> </dict>  
      PowerManagement  fix:
      Set HWPEnable=YES in Clover (already set), CPUFloor to "700", Frequency to "2300" and "3200"(Normal and Turbo, if you have i7-6700HQ version then it should be "2600", "3500") and "FrequencyVectors" from "0x0d000000" to "0x07000000" in "S/L/E/IOPlatformPluginFamily.kext/Contents/PlugIns/X86PlatformPlugin.kext/Contents/Resources/Mac-A5C67F76ED83108C.plist", MSR _xcpm_idle Patch to KernelToPatch in Clover (If you have High Sierra, change "MatchOS" to 10.13):

      <key>KernelToPatch</key> <array> <dict> <key>Comment</key> <string>MSR 0xE2 _xcpm_idle instant reboot(c) Pike R. Alpha</string> <key>Disabled</key> <false/> <key>Find</key> <data> ILniAAAADzA= </data> <key>MatchOS</key> <string>10.14</string> <key>Replace</key> <data> ILniAAAAkJA= </data> </dict> </array> Reboot, and it's 800MHz in idle state, same on Windows.
       

      Elan SmartTouchpad
      I only use scrolling, one-, double- & tripletap
      If you want to try other gestures go to this link for more informations, options (v4.6.5) ->  DETAILS ABOUT THE SMART TOUCHPAD DRIVER FEATURES
      Fn Brightness keys not working with this, tried several things without success. With VoodoPS2Controller it's working, but you'll have no gestures (neither scrolling).
       
       
      Before updating to a new version of Catalina please update kexts (and clover if necessary) to newer versions to avoid kernel panics.
      Generate a serial number with Clover Configurator.app (open up your config.plist with CC then -> SMBIOS -> Serial Number -> Generate New)
       
      Catalina & Windows 10 Dual-Boot:
      Dual-boot clean install (on one drive), UEFI Only:
       
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac),   Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart,  Boot into your Win installer, Format the partition you created for Win, install.   Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       5.  You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      Dual-boot with Windows installed first (on one drive), UEFI Only:
      If you already have Windows and you don't want to lose all your data there is a hope:
      I created a video from this restore method: [Hackintosh] Dual-Boot High Sierra & Windows - when Windows already installed - no data waste - UEFI
      You need bootable Mac Installer and a full system restore image (link is in my video's description).
      (You may see errors if your EFI partition is not 200 MB)
       Boot into your Windows, resize your partition or create one for Mac.  Boot into your Mac installer and in Disk Utility format the partition you created.  Restore from image: select your full system restore image.  When it's finished restoring you just need to restart, then boot to the system with your usb.  When you successfully booted to Mac desktop, mount your EFI partition (use terminal or an EFI mounter app), open EFI, you will see there is a Microsoft folder already (don't touch that!). Copy my CLOVER folder to the EFI folder then Restart.  Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       7.  You're done! You can select your old Windows and your new macOS!
      (Only tried with Windows 8/8.1/10. I don't know Windows 7,etc.)
       
      IF YOU GETTING ERRORS DURING MAC RESTORE:
      - Make sure you have partitions in GPT
      - Windows using 100 MB EFI and will annoy the Mac restore. Don't worry, just ignore the errors.
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      - Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)
       
      IF YOU USED RESTORE METHOD THEN CAN'T MOUNT YOUR EFI PARTITION (No EFI partition found):
      - It's because your EFI is not 200 MB or not an "Apple" original EFI,  but do not worry, try another EFI mounter, or mount from terminal (I used EFI mounter v3: Getting errors, but you can mount and use without problem)
      - You also could "mount" the EFI from Windows:
      1st method: open cmd in administrator mode and type:
      diskpart list vol (Now select the "System" volume,(FAT 32) For example I select 4) sel vol 4 list part (Select System type partition, for example 2) sel part 2 assign letter=b (This will "mount" your EFI partition) Open Explorer++ or TotalCommander in administrator mode to manage EFI remove letter=b (This will "unmount" your EFI) 2nd method: open cmd in administrator mode and type:
      mountvol b: /s (This will mount your EFI) Open Explorer++ or TotalCommander in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI) Thanks to all OSXLatitude members for helping me out! (Jake Lo, Hervé, Bronxteck, black.dragon74)!
      Notes:
      2019.11.03: Enabled SIP caused a lots of issues so now it's disabled -> updated bootpack
      2019.11.02: Updated to 10.15.1 -> no problem when/after installing
      2019.10.09: Installed macOS Catalina 10.15 -> Updated Clover, kexts & config.plist -> no problem so far
      2019.08.18: Updated to 10.14.6 -> no problem when/after installing
      2019.06.01: Updated to 10.14.5 -> no problem when/after installing
      2019.04.25: Optimized touchpad scrolling -> updated install files
      2019.03.30: Fixed USB 3.0 ports, fixed Bluetooth crashes after sleep -> updated bootpack
      2019.03.28: Updated to 10.14.4. Unexpected crashes while updating to 10.14.4 -> fixed by updating Clover to the latest (v4910) version. Bluetooth crashes appeared -> fixed by downgraded Brcm*.kexts. Updated bootpack.
      2019.02.24: Bluetooth crashes after sleep -> fixed, updated bootpack. 
      2019.02.22: Updated to 10.14.3. Fixed HDMI Audio by installing "FakePCIID_Intel_HDMI_Audio.kext" -> fixed freezing during boot. Fixed brightness levels by installing "AppleBacklightFixup.kext". Also updated bootpack & postinstall zip down in attachments.
      2019.01.21: Removed FakeSMC.kext, SMCHelper-64.efi, replaced by VirtualSMC.kext, VirtualSMC.efi because I got random freezes when booting system (kextd stall[0], (120s): 'AppleACPICPU' -> CPU is at 100%, fans are spinning fast), also updated bootpack in the attachments "acer_aspire_v591g-55tu_clover.zip" -> Freeze continued, brought back FakeSMC, deleted VirtualSMC (caused BT crashes).
      2019.01.18: HDMI Audio is fixed, I didn't do anything HDMI Audio is not fixed, sometimes it worked but most likely not. (no idea why)
      2018.12.09: Updated to 10.14.2 -> did without any complication
      2018.11.28: Fixed combo-jack garbage sound output by installing ALCPlugFix and CodecCommander.kext
      2018.11.01: Updated to 10.14.1 -> HDMI & VGA ports are gone again. -> Fixed by "AppleIntelSKLGraphicsFramebuffer.kext" rollback from 10.14.
      2018.09.28: Updated to Mojave 10.14 -> Fixed HDMI & VGA Outputs by adding "AppleGraphicsDevicePolicy.kext" patches to config.plist, HDMI audio not working
    • By Cwtf
      I just made a clean install of High Sierra on a 1TB crucial ssd. Installed clover Clover_v2.5k_r5070 into the EFI of this ssd, but when I tried to make it my default boot drive, the clover screen wouldn't come up, and left a black screen.
      I tried using the Olarilia usb drive and clover did the same thing.  The only way I can currently boot is to use my old drive with clover v2.4k_4945 then select  my new drive from the clover menu.   
       
      Do I need to install v2.4k on my new drive or is there a way I can get v2.5k working?
       
      I have a GA-x79-ud5 motherboard, AMD  rx580 graphics card and use a Sony 4k tv as my monitor.
    • By kylon
      Cloud Clover Editor is an open source application that allows you to manage the configuration of various Hackintosh Bootloaders.

      Open Cloud Clover Editor
       
      Cloud Clover Editor Wiki
      Cloud Clover Editor Sources
       
       
      Features
      Supports Clover EFI, Ozmosis, Chameleon, OpenCore GUI and Text Editor Mode CCE Bank Mobile friendly and more...  
      Officially supported browsers
      Chrome 42+ Microsoft Edge 14+ Firefox 39+ Safari 10+ Opera 29+ Opera Mobile 12+ Chrome for Android 75+ Firefox for Android 67+  
       
      Credits
      mackie100 - took some ideas from his app Clover EFI dev team Eric Slivka - new serial number Virtual1 - new serial number cecekpawon - PHP 5.3.3 patch, , help with the ACPI Loader Mode flag and more Micky1979 - Clover flying editor  (Discontinued) crusher. - Help with the ACPI Loader Mode flag Download-Fritz - Help with the ACPI Loader Mode flag Pavo - Ozmosis fields and values stehor - Ozmosis fields and values Sherlocks - General help and support gujiangjiang - General help and support  
      Please let me know if i forgot you!
×