Jump to content
ErmaC

Clover General discussion

20,932 posts in this topic

Recommended Posts

Since 18.10, GhostBSD is no longer using grub2 as defaut bootloader but what TrueOS has (FreeBSD hybrid Loader). It comes with rEFInd as bootloader #BTW; any idea how to make Clover detects this (also ZFS as rEFInd supports this FS) ? Thanks.

 

VirtualBox_Ghost-BSD-18.10_03_01_2019_13_01_10.png

Share this post


Link to post
Share on other sites
Advertisement
4 hours ago, Slice said:

OK, "zfs_x64.efi" is installed on /EFI/CLOVER/drivers64UEFI/

I was actually, referring to this part but I found no BSD entry loader on it.

Adding this line is definitely possible, it detected by Clover and BSD System boot just fine (plus os_ghostbsd.icns for GUI):

{ L"\\EFI\\boot\\bootx64-trueos.efi", L"GhostBSD EFI boot menu", L"ghostbsd,linux", "GhostBSD" },

..though sorry for my script kiddie, it' s wrong bcoz BSD is not Linux for sure.

VirtualBox_Ghost BSD 18.10_04_01_2019_09_50_45.png

Share this post


Link to post
Share on other sites

That's a list of icons, you don't need to put linux there, lol. Just do ghostbsd,bsd and make both icons if you want. You can't have both ghostbsd and trueos installed then? That's stupid.

Share this post


Link to post
Share on other sites

Hi @Slice

 

Thanks for commit r4833: If I understand well Goldfish64's readme, it works only for Intel HD. My system use HDMI audio via my Nvidia graphic card. How can I have sound at startup on Clover GUI in this case. There is a solution.

Share this post


Link to post
Share on other sites
1 hour ago, apianti said:

That's a list of icons, you don't need to put linux there, lol. Just do ghostbsd,bsd and make both icons if you want. You can't have both ghostbsd and trueos installed then? That's stupid.

Oh I see, now much better with "os_unknown.icns" instead of wrong generic "os_linux.icns" for BSD System LoL (if there's no os_ghostbsd.icns provided with a theme used).

 

#EDIT: Nevermind, no longer using "os_unknown.icns" if there's "os_bsd.icns" on /icons dir (which previously was missing).

VirtualBox_Ghost BSD 18.10_04_01_2019_15_39_16.png

Edited by Badruzeus

Share this post


Link to post
Share on other sites
31 minutes ago, Matgen84 said:

Hi @Slice

 

Thanks for commit r4833: If I understand well Goldfish64's readme, it works only for Intel HD. My system use HDMI audio via my Nvidia graphic card. How can I have sound at startup on Clover GUI in this case. There is a solution.

VoodooHDA works with HDMI as well as with non-Intel chipsets so yes it's possible just requires a work.

Share this post


Link to post
Share on other sites
1 hour ago, Matgen84 said:

Hi @Slice

 

Thanks for commit r4833: If I understand well Goldfish64's readme, it works only for Intel HD. My system use HDMI audio via my Nvidia graphic card. How can I have sound at startup on Clover GUI in this case. There is a solution.

I am unable to build r4833 until i downloaded AudioPkg-master.zip from https://github.com/Goldfish64/AudioPkg and extract it to my edk2 folder and rename it. Is this what you did also?

After using the guide from Slice i cannot get sound to work on my laptop even though while setting it up in clover shell i had audio. Is the issue my conversion?

 

Mac Startup.wav

Screen Shot 2019-01-04 at 8.10.25 pm.png

Edited by SavageAUS

Share this post


Link to post
Share on other sites

 

1 hour ago, MICKHAEL said:
check this file

 

and if you could, share your r4833 build please

sound.wav

Will do when I get a chance.

I converted my file as slice described and also tried 1 and 2 channel but neither work. Hopefully his test file will work.

 

Edit: test file works fine so it’s my conversion.

 

Edit2: All working now. Attached mac startup chime working with clover for anyone who wants it.

 

Clover_v2.4k_r4833.pkg

 

macstart.wav

Edited by SavageAUS

Share this post


Link to post
Share on other sites
3 hours ago, Badruzeus said:

@Slice Following your guide, it doesn't work on my mach till I also placed "BootChimeDxe.efi" on ../drivers64UEFI

But weird is, I hear StartUp sound after Clover GUI, not before it.. on the contrary as what you said.

Anyway, I built AudioPkg under Linux with GCC5 (debbuild.sh), how if using macOS? Thanks.

r4833_plus_AudioPkg.zip

Try the file attached in the theme folder your currently using.

macstart.wav

Share this post


Link to post
Share on other sites

Hi again @Slice

 

Could you add AudioPkg to Ext-Package: it will be more easy to build Clover than add AudioPkg manually method. Please. :)

Share this post


Link to post
Share on other sites
7 minutes ago, Slice said:

I propose to add AudioDxe into Clover instead of whole package.

For this moment you have to add ready-to-use-binaries.

 

Thanks for reply. I must use binaries. If I copy AudioPkg in src/UDK2018, I can't build Clover because I've this issue:

 

build.py...
/Users/mathieu/src/UDK2018/Clover/Library/WaveLib/WaveLib.inf(35): error 000E: File/directory not found in workspace
	/Users/mathieu/src/UDK2018/AudioPkg/AudioPkg.dec

 

Share this post


Link to post
Share on other sites

You guys should definitely add a volume value for the chime... ;)

 

I just checked the stuff on my Skylake WoodenBox with an Headset and it almost blew my head off.... :D

Share this post


Link to post
Share on other sites
You guys should definitely add a volume value for the chime...

 

I just checked the stuff on my Skylake WoodenBox with an Headset and it almost blew my head off....

Clearly you didn’t follow instructions.

 

 

 

Tuning.Before first start you have to tune your sound system.Start Clover, goto Shell.Shell> fs0:fs0:> cd EFI\CLOVER\toolsfs0:EFI\CLOVER\tools>BootChimeCfg.efiYou will see all options-l -- list all devices. See and choose.Then you have to configure and hear.BootChimeCfg.efi -s 1 -v 60 -t Audio Output=1 and Sound Volume=60% will be stored in NVRAM and will be used by Clover after next restart.

   

 

 

Edited by SavageAUS

Share this post


Link to post
Share on other sites

Hi Guys

 

Despite of Slice's guide, I haven't any sound: AudioDxe isn't compatible with external HDMI. I use Nvidia HDMI audio output on my desktop. :cry::cry::cry:

 

From Goldfish64 Readme file:

AudioPkg is a set of drivers/applications for supporting audio (currently only Intel HD audio) under UEFI.

 

Edited by Matgen84

Share this post


Link to post
Share on other sites

Tried it on a H170N-Wifi, which only uses the HD530.

Since the Boards has two HDMI outlets I tested the following on both HDMI ports, but couldn't get a tone out of it.Clover4833-1.thumb.jpg.c896f1ba1190e16d5da2cf5f31458e50.jpg

 

Switching to "-s 2" I could hear the chime, while i had a headset plugged in at green rear.

Share this post


Link to post
Share on other sites

I was off for some days. Maybe this has been explained already somewhere else. Anyway, my problem is that when building the current clover revision with Build Clover command, I get the following error:

 

Processing meta-data .

build.py...
~/src/edk2/Clover/Library/WaveLib/WaveLib.inf(35): error 000E: File/directory not found in workspace
	~/src/edk2/AudioPkg/AudioPkg.de

How to solve this issue? 

Share this post


Link to post
Share on other sites
6 minutes ago, KGP-iMacPro said:

I was off for some days. Maybe this has been explained already somewhere else. Anyway, my problem is that when building the current clover revision with Build Clover command, I get the following error:

 


Processing meta-data .

build.py...
~/src/edk2/Clover/Library/WaveLib/WaveLib.inf(35): error 000E: File/directory not found in workspace
	~/src/edk2/AudioPkg/AudioPkg.de

How to solve this issue? 

 

I think Build_Clover.command will be update. You can post this issue to the Build_Clover topic. 

Share this post


Link to post
Share on other sites
5 hours ago, KGP-iMacPro said:

I was off for some days. Maybe this has been explained already somewhere else. Anyway, my problem is that when building the current clover revision with Build Clover command, I get the following error:

 


Processing meta-data .

build.py...
~/src/edk2/Clover/Library/WaveLib/WaveLib.inf(35): error 000E: File/directory not found in workspace
	~/src/edk2/AudioPkg/AudioPkg.de

How to solve this issue? 

Rev 4834.

Just wonder how can I compile before.

Share this post


Link to post
Share on other sites
16 hours ago, Matgen84 said:

Hi @Slice

 

Thanks for commit r4833: If I understand well Goldfish64's readme, it works only for Intel HD. My system use HDMI audio via my Nvidia graphic card. How can I have sound at startup on Clover GUI in this case. There is a solution.

 

No, it just doesn't work for HDMI or digital outputs, there are both intel and nvidia controllers and many audio codecs supported.

 

16 hours ago, Slice said:

VoodooHDA works with HDMI as well as with non-Intel chipsets so yes it's possible just requires a work.

 

Yes, just need to add digital support, but there is intel and nvidia chipsets support already, the only other one would be amd, that I know of. Don't confuse the controller chipset with the codec chipset.

https://en.wikipedia.org/wiki/Intel_High_Definition_Audio#Host_controller

https://en.wikipedia.org/wiki/Sound_card#Integrated_sound_hardware_on_PC_motherboards

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   1 member

  • Similar Content

    • By kingoffright
      Dear all,
       
      I have a external harddisk about 500GB, I installed the clover into it and the harddisk is GPT format, below is the 3 partitions details:
      FS01: EFI - disk0s1 - fat32
      FS02: install mac  image - disk0s2 -  hfs+
      FS03: install windows 10 - disk0s3 - fat32
       
      I can use this external harddisk to install Mac without issue, I use below steps to install windows 10
      enter the FS03:
      cd to efi/boot/ and excuete bootx64.efi
      after pop up the windows install screen, i click next and it shows error 'A media driver your computer needs is missing...' and the installation can not go any further.
      Firstly I use ultraiso to write the windows 10 image to a flash disk and no issue to start install window 10 so the image is working fine. Since I dont know how to write
      a wiindow installation image into harddisk partition, I used winrar extra all the files into disk0s3, am I missing some steps or actually clover not support to install windows
      by partitions, apprecating any helps.
       
    • By kushwavez
      Acer Aspire V15 V5-591G - Catalina 10.15.1
      This post will no longer updated, go for the osxlatitude link for further updates
      Original and updated link:
      https://osxlatitude.com/forums/topic/11355-acer-aspire-v-15-v5-591g-catalina-windows-10/
      (Note: mine is 55TU version, but the bootpack will work fine with another versions of 591G, for example: V5-591G-71K2, -764Z, -59PU, etc.)
      Specifications:
      - Motherboard: USOPP_SLS (Skylake-H PCH)
      - BIOS: Insyde Corp. v 1.15
      - CPU: Intel Core i5-6300HQ 2.3 GHz (Skylake)
      - GPU: NVIDIA GeForce GTX 950M 2 GB (Optimus) & Intel HD Graphics 530
      - RAM: SK hynix 4 GB DDR4 (Later I bought + KINGSTON 4 GB) 2133 MHz
      - WiFi + Bluetooth: Qualcomm Atheros QCNFA344A 5 GHz (Later -> Broadcom BRCM94352Z M.2 5 GHz WiFi + 4.0 Bluetooth)
      - Audio: Realtek HD Audio: ALC 255 
      - Ethernet: Realtek RTL8168/8111
      - Card Reader: Realtek USB 2.0 Card Reader (USB2.0-CRW)
      - Webcam: HD Webcam
      - HDD: TOSHIBA MQ01ACF032 320 GB HDD
      - SSD: SPCC M.2 230 GB SSD
      - Display: 1366x768 (15.6", Matte)
      - Battery: 6 cell 56Wh / 5040mAh
      - Connectors: 
      1x SD Card Reader 2x USB 3.0 (1x USB Charging), 1x USB 2.0 1x VGA 1x HDMI 1x 3.5mm microphone/audio combined jack connector 1x Ethernet (Rj-45) - Keyboard & Touchpad: Multi-Touch & Multi-gestures ELAN 501 Touchpad, Backlight Keyboard.
      Working:  
      - Wi-Fi (with BCM94352Z)
      - Bluetooth hand-off (With BCM94352Z)
      - Full Graphics enabled on HD 530: ig-platform-id: 0x191b0000 (HD 530 Mobile)
      - Display: if default colour profile is corrupted (blue is not actual blue but purplish) Use "Rec. ITU-R BT. 709-5" Color Profile (System Pref. -> Displays -> Color)
      - HDMI & VGA Outputs: AppleGraphicsDevicePolicy.kext Clover patch
      - Audio (ALC 255): (Internal Speakers, Internal Microphone, Headphone jack with AppleALC, ALCPlugFix -> layout-id=17)
      - Ethernet Realtek 8168/8111: RealtekRTL8111.kext
      - App Store, Messages, FaceTime, Siri, iCloud (native)
      - Integrated webcam (native)
      - 3.0 USB (native)
      - Touchpad and Keyboard (ELAN501): Fn keys are good, the weird thing is the Brightness key. On my keyboard it's Pause Break:Br-up, Fn+F12:Br-dwn-> To fix this try Karabiner (VoodoPS2Controller.kext), - for gestures try SmartTouchpad drivers
      - Battery info: Install ACPIBatteryManager.kext with Kext Utility or other installer.
      - Sleep Mode
      - SSD with TRIM enabled (to enable trim, open Terminal and write "sudo trimforce enable")
      Not working:
      - Original Wi-Fi (Qualcomm Atheros QCNFA344A):  unsupported, you need switch to BCM94352Z or just use a mini usb wifi dongle.
      - NVIDIA GeForce GTX 950M: Optimus not supported.
      - Card Reader: Unsupported -> Can't really fix because I don't have any SD Card at the moment, maybe can be fixed by adding Prod & Ven IDs to AppleStorageDevices.kext, I never used it anyway. name: "USB2.0-CRW" Prod ID: "0x0129" Ven ID: "0x0bda  (Realtek Semiconductor Corp.)"
      For Wi-Fi:
      - 1st method: You can choose an external USB wifi dongle (I used TP-Link Archer T1U (5GHz support), TP-Link has official macOS drivers, you just need to install it
      - 2nd and I think the best method: Replace your M.2 Qualcomm Card with a compatible BCM94352Z card (you will have hand-off Bluetooth too), just install the kexts (enabled with BrcmFirmwareRepo.kext, BrcmPatchRAM2.kext, FakePCIID.kext, FakePCIID_Broadcom_WiFi.kext, they're all in my attached zip). You could buy this card from ebay, aliexpress, or amazon
       
      Issues:
      - None
      BIOS Settings:
      - BIOS version 1.15 (irrelevant)
      - Secure Boot: Disabled
      - Touchpad: Advanced
      - Boot mode: UEFI
      Getting ready for Installation:
      - Download the Catalina install zip (bootpack & postinstall): acer_aspire_V591G-55TU_cata.zip
      Installation:
      - Create an installer with any method you know (- Mac: createinstallmedia - Windows: Transmac, Vmware, Win32diskimager)
      - Copy my Clover folder to the USB's EFI folder
      - Boot with the Installer USB
      - If you stuck in boot, reboot and in the Clover bootloader select "config_debug.cfg" -> you'll have more informations about the freeze
       
      Please open the README.rtf in my install zip for more informations about the USB Installer & Post installation!
      On Catalina the System folder is read-only, so you need to remount in rw to modify System/Library. 
      If you have a single RAM and getting panic at boot, then you need to edit the "config.plist" with these (SMBIOS->after "Version 1.0"):
      ->Edit "Frequency" and "Size" to match your RAM values
      <key>Version</key> <string>1.0</string> <key>Memory</key> <dict> <key>Channels</key> <integer>1</integer> <key>SlotCount</key> <integer>1</integer> <key>Modules</key> <array> <dict> <key>Slot</key> <integer>0</integer> <key>Size</key> <integer>8192</integer> <key>Frequency</key> <integer>2133</integer> <key>Type</key> <string>DDR4</string> </dict> </array> </dict> </dict>  
      PowerManagement  fix:
      Set HWPEnable=YES in Clover (already set), CPUFloor to "700", Frequency to "2300" and "3200"(Normal and Turbo, if you have i7-6700HQ version then it should be "2600", "3500") and "FrequencyVectors" from "0x0d000000" to "0x07000000" in "S/L/E/IOPlatformPluginFamily.kext/Contents/PlugIns/X86PlatformPlugin.kext/Contents/Resources/Mac-A5C67F76ED83108C.plist", MSR _xcpm_idle Patch to KernelToPatch in Clover (If you have High Sierra, change "MatchOS" to 10.13):

      <key>KernelToPatch</key> <array> <dict> <key>Comment</key> <string>MSR 0xE2 _xcpm_idle instant reboot(c) Pike R. Alpha</string> <key>Disabled</key> <false/> <key>Find</key> <data> ILniAAAADzA= </data> <key>MatchOS</key> <string>10.14</string> <key>Replace</key> <data> ILniAAAAkJA= </data> </dict> </array> Reboot, and it's 800MHz in idle state, same on Windows.
       

      Elan SmartTouchpad
      I only use scrolling, one-, double- & tripletap
      If you want to try other gestures go to this link for more informations, options (v4.6.5) ->  DETAILS ABOUT THE SMART TOUCHPAD DRIVER FEATURES
      Fn Brightness keys not working with this, tried several things without success. With VoodoPS2Controller it's working, but you'll have no gestures (neither scrolling).
       
       
      Before updating to a new version of Catalina please update kexts (and clover if necessary) to newer versions to avoid kernel panics.
      Generate a serial number with Clover Configurator.app (open up your config.plist with CC then -> SMBIOS -> Serial Number -> Generate New)
       
      Catalina & Windows 10 Dual-Boot:
      Dual-boot clean install (on one drive), UEFI Only:
       
       Boot into your Mac installer, Create 2 partitions in GUID table (1 for Win (I used FAT32 but I think it doesn't matter what you choose), 1 for Mac),   Install Mac, boot with your USB, mount your EFI partition (use terminal or an EFI mounter app), create an EFI folder (if there is no folder), copy the CLOVER folder I attached to the EFI folder, restart,  Boot into your Win installer, Format the partition you created for Win, install.   Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       5.  You're done! It will booting into Clover when you start the system, and you can select Win or Mac (or another OS if installed on a 3rd partition).
       
      Dual-boot with Windows installed first (on one drive), UEFI Only:
      If you already have Windows and you don't want to lose all your data there is a hope:
      I created a video from this restore method: [Hackintosh] Dual-Boot High Sierra & Windows - when Windows already installed - no data waste - UEFI
      You need bootable Mac Installer and a full system restore image (link is in my video's description).
      (You may see errors if your EFI partition is not 200 MB)
       Boot into your Windows, resize your partition or create one for Mac.  Boot into your Mac installer and in Disk Utility format the partition you created.  Restore from image: select your full system restore image.  When it's finished restoring you just need to restart, then boot to the system with your usb.  When you successfully booted to Mac desktop, mount your EFI partition (use terminal or an EFI mounter app), open EFI, you will see there is a Microsoft folder already (don't touch that!). Copy my CLOVER folder to the EFI folder then Restart.  Now, it's automatically booting into Windows. To use Clover open cmd in administrator, type:  bcdedit /set {bootmgr} path \EFI\CLOVER\CLOVERX64.efi       7.  You're done! You can select your old Windows and your new macOS!
      (Only tried with Windows 8/8.1/10. I don't know Windows 7,etc.)
       
      IF YOU GETTING ERRORS DURING MAC RESTORE:
      - Make sure you have partitions in GPT
      - Windows using 100 MB EFI and will annoy the Mac restore. Don't worry, just ignore the errors.
       
      IF YOU GETTING ERRORS DURING WINDOWS INSTALLATION (could not be formatted, etc):
      - Make sure you have GPT partitions, and GPT (UEFI) installer, also disconnect all external storage drives (except the installer USB)
       
      IF YOU USED RESTORE METHOD THEN CAN'T MOUNT YOUR EFI PARTITION (No EFI partition found):
      - It's because your EFI is not 200 MB or not an "Apple" original EFI,  but do not worry, try another EFI mounter, or mount from terminal (I used EFI mounter v3: Getting errors, but you can mount and use without problem)
      - You also could "mount" the EFI from Windows:
      1st method: open cmd in administrator mode and type:
      diskpart list vol (Now select the "System" volume,(FAT 32) For example I select 4) sel vol 4 list part (Select System type partition, for example 2) sel part 2 assign letter=b (This will "mount" your EFI partition) Open Explorer++ or TotalCommander in administrator mode to manage EFI remove letter=b (This will "unmount" your EFI) 2nd method: open cmd in administrator mode and type:
      mountvol b: /s (This will mount your EFI) Open Explorer++ or TotalCommander in administrator mode to manage EFI mountvol b: /d (This will unmount your EFI) Thanks to all OSXLatitude members for helping me out! (Jake Lo, Hervé, Bronxteck, black.dragon74)!
      Notes:
      2019.11.03: Enabled SIP caused a lots of issues so now it's disabled -> updated bootpack
      2019.11.02: Updated to 10.15.1 -> no problem when/after installing
      2019.10.09: Installed macOS Catalina 10.15 -> Updated Clover, kexts & config.plist -> no problem so far
      2019.08.18: Updated to 10.14.6 -> no problem when/after installing
      2019.06.01: Updated to 10.14.5 -> no problem when/after installing
      2019.04.25: Optimized touchpad scrolling -> updated install files
      2019.03.30: Fixed USB 3.0 ports, fixed Bluetooth crashes after sleep -> updated bootpack
      2019.03.28: Updated to 10.14.4. Unexpected crashes while updating to 10.14.4 -> fixed by updating Clover to the latest (v4910) version. Bluetooth crashes appeared -> fixed by downgraded Brcm*.kexts. Updated bootpack.
      2019.02.24: Bluetooth crashes after sleep -> fixed, updated bootpack. 
      2019.02.22: Updated to 10.14.3. Fixed HDMI Audio by installing "FakePCIID_Intel_HDMI_Audio.kext" -> fixed freezing during boot. Fixed brightness levels by installing "AppleBacklightFixup.kext". Also updated bootpack & postinstall zip down in attachments.
      2019.01.21: Removed FakeSMC.kext, SMCHelper-64.efi, replaced by VirtualSMC.kext, VirtualSMC.efi because I got random freezes when booting system (kextd stall[0], (120s): 'AppleACPICPU' -> CPU is at 100%, fans are spinning fast), also updated bootpack in the attachments "acer_aspire_v591g-55tu_clover.zip" -> Freeze continued, brought back FakeSMC, deleted VirtualSMC (caused BT crashes).
      2019.01.18: HDMI Audio is fixed, I didn't do anything HDMI Audio is not fixed, sometimes it worked but most likely not. (no idea why)
      2018.12.09: Updated to 10.14.2 -> did without any complication
      2018.11.28: Fixed combo-jack garbage sound output by installing ALCPlugFix and CodecCommander.kext
      2018.11.01: Updated to 10.14.1 -> HDMI & VGA ports are gone again. -> Fixed by "AppleIntelSKLGraphicsFramebuffer.kext" rollback from 10.14.
      2018.09.28: Updated to Mojave 10.14 -> Fixed HDMI & VGA Outputs by adding "AppleGraphicsDevicePolicy.kext" patches to config.plist, HDMI audio not working
    • By Cwtf
      I just made a clean install of High Sierra on a 1TB crucial ssd. Installed clover Clover_v2.5k_r5070 into the EFI of this ssd, but when I tried to make it my default boot drive, the clover screen wouldn't come up, and left a black screen.
      I tried using the Olarilia usb drive and clover did the same thing.  The only way I can currently boot is to use my old drive with clover v2.4k_4945 then select  my new drive from the clover menu.   
       
      Do I need to install v2.4k on my new drive or is there a way I can get v2.5k working?
       
      I have a GA-x79-ud5 motherboard, AMD  rx580 graphics card and use a Sony 4k tv as my monitor.
    • By kylon
      Cloud Clover Editor is an open source application that allows you to manage the configuration of various Hackintosh Bootloaders.

      Open Cloud Clover Editor
       
      Cloud Clover Editor Wiki
      Cloud Clover Editor Sources
       
       
      Features
      Supports Clover EFI, Ozmosis, Chameleon, OpenCore GUI and Text Editor Mode CCE Bank Mobile friendly and more...  
      Officially supported browsers
      Chrome 42+ Microsoft Edge 14+ Firefox 39+ Safari 10+ Opera 29+ Opera Mobile 12+ Chrome for Android 75+ Firefox for Android 67+  
       
      Credits
      mackie100 - took some ideas from his app Clover EFI dev team Eric Slivka - new serial number Virtual1 - new serial number cecekpawon - PHP 5.3.3 patch, , help with the ACPI Loader Mode flag and more Micky1979 - Clover flying editor  (Discontinued) crusher. - Help with the ACPI Loader Mode flag Download-Fritz - Help with the ACPI Loader Mode flag Pavo - Ozmosis fields and values stehor - Ozmosis fields and values Sherlocks - General help and support gujiangjiang - General help and support  
      Please let me know if i forgot you!
×