Jump to content
ErmaC

Clover General discussion

21,115 posts in this topic

Recommended Posts

Advertisement

Oh man, where did Kabyl go? So many people have disappeared... In case anyone is wondering, I'll just directly state that when Slice, Kabyl, TheKing, usr-sse2, and modbin, I think that's everyone, started the EFI project that deviated from Chameleon, Kabyl suggested Clover because the mac command key icon looks like a four leaf clover.

Share this post


Link to post
Share on other sites
6 hours ago, blackosx said:

 

1 hour ago, apianti said:

Oh man, where did Kabyl go? So many people have disappeared... In case anyone is wondering, I'll just directly state that when Slice, Kabyl, TheKing, usr-sse2, and modbin, I think that's everyone, started the EFI project that deviated from Chameleon, Kabyl suggested Clover because the mac command key icon looks like a four leaf clover.

 

Thank you.

 

Yup, this is interesting. Some history there.

 

Share this post


Link to post
Share on other sites
On 12/19/2018 at 10:39 AM, Loloflat6 said:

 

Hello  @Slice :

 

Like yapan4 i have today a problem with my new X299 iMacPro 1,1 SMBIOS build :

 

At the begening of this year i mounted  a new build with a Gigabyte X299 UD4 Pro mobo and after succefully managed an install with High Sierra upgraded to 10.13.6 i was able to test all the developer beta releases and install Mac Os Mojave 10.14.1.18B75.  This build is fully fonctionnal.

 

So i decided for professionnal  usage to have a second build this time with an EVGA X299 FTW K mobo - i9 7940x , first with 32 GB 2133 mhz Crucial ram an now with 32 GB 3000 mhz ram Corsair Dominator platinium ( because i thought my probem was the ram)

 

But even if i could managed a fresh install of HIgh Sierra on this build ( High Sierra 10.13.6 is fully fonctionnal on my new EVGA build)

 

i can't boot on any USB Mojave installer ( i did try three different sticks) nor on pre-installed Mojave 10.14.0 or Mojave 10.14.1 on SSD.

 

Like yapan4 my boot stuck at end randomseed +++++ even with severalls Clover version the latest i used is Clover 4798

 

Here is my boot.log , any help will be very appreciated . Thanks

 

Attached my preboot.log

 

 

preboot.log

 

 

Perhaps this might help you 

 

Share this post


Link to post
Share on other sites

I thought they might destroy github worse than it was doing itself before they bought it but they seem to be actually making a huge effort to make it better and actually carry out their "we are open sourcing" plans.

Share this post


Link to post
Share on other sites
Spoiler

 

 

Thanks for your suggestion but here in Clover general discussion I'm on the wrong thread : I think is a problem between EVGA bios and Mojave witch one I don't know : MSR patche with CPUpm checked works in High Sierra and don't work in Mojave  : I'm able to install Mojave on mobos series 7 and 8, usually bios allows to uncheck CFG_lock and also on an E7440 Dell laptop ,  also works on my Gigabyte X299 mobo ...

 

Edited by Loloflat6

Share this post


Link to post
Share on other sites
17 hours ago, Loloflat6 said:
  Reveal hidden contents

 

 

Thanks for your suggestion but here in Clover general discussion I'm on the wrong thread : I think is a problem between EVGA bios and Mojave witch one I don't know : MSR patche with CPUpm checked works in High Sierra and don't work in Mojave  : I'm able to install Mojave on mobos series 7 and 8, usually bios allows to uncheck CFG_lock and also on an E7440 Dell laptop ,  also works on my Gigabyte X299 mobo ...

 

Hi, 

 

You could do this at your own risk: https://github.com/acidanthera/AptioFixPkg#verifymsre2

 

Unlock CFG. 

 

Edit: Or you could ask EVGA for a UEFI BIOS with unlocked CFG. 

Edited by Dwarfy

Share this post


Link to post
Share on other sites

Stupid question. If I lower the CPU vcore in BIOS, does that have any effect in macOS if I have i7-7700k with native PM?  I lowered the vcore in BIOS, but it's still higher on HWmonitor.

Edited by Amble

Share this post


Link to post
Share on other sites
On 12/28/2018 at 3:27 AM, Slice said:

Why I can know more?


Is this CLOVER or any SMC.kext/key problem??? Try with VirtualSMC.kext and FakeSMC.kext without success.

I use same configuration but working fine in Gigabyte B360 motherboard. This is MSI H310M PRO-M2 + i3 8100 + GTX1060. I use Clover r4813

I attach CLOVER folder for additional informations.

photo_2018-12-30_04-04-53.jpg

CLOVER.zip

Share this post


Link to post
Share on other sites

Hi guys, 

One quick question the Christmas theme of clover 4813 broke my boot of 2 Mojave ssds anyone knows why or is my the only case that the theme affected?

 

Edited by MorenoAv

Share this post


Link to post
Share on other sites
35 minutes ago, MorenoAv said:

Hi guys, 

One quick question the Christmas theme of clover 4813 broke my boot of 2 Mojave ssds anyone knows why or is my the only case that the theme affected?

 

Attaching your "debug.log or preboot.log" maybe helpful.

Just a hint; "os_moja.icns" is available for "christmas" themes since this commit, both from Clover installer package or repo version. I guess, plz update to latest version.

Share this post


Link to post
Share on other sites
1 hour ago, MorenoAv said:

hi @Badruzeus,

Thanks for your response, and here it is the boot log... and I have downgraded to 4798, and the result is the same... but my boot log shows exactly that...

 

Clover Boot Log - 2018:12:30 - cópia.rtf

I get this from your log related to theme used:

1:958  0:000	[!] Icon 18 (icons\vol_internal_apfs.icns) not found (path: EFI\CLOVER\themes\christmas)

Not only "vol_internal_apfs.icns" was missing but also "os_moja.icns" from "/icons" dir before they're added later with this commit.

And what I meant with "latest version" from prev. post is actually; "christmas" theme, not Clover rev.

So, I guess plz update your "christmas" theme with CloverThemeManager app or...

cd ~/Desktop
git archive --remote=git://git.code.sf.net/p/cloverefiboot/themes HEAD themes/christmas | tar -x -v

Well, you could also attach screenshot of your current issue with christmas theme then we'll know how it looks like (exactly).

Edited by Badruzeus

Share this post


Link to post
Share on other sites

Well I don't know exactly what the issue is because I have restarted my machine and now the boot is like the picture, and my other ssd is missing... again, it appears and disappears randomly... 

IMG_0037.jpeg

Edited by MorenoAv

Share this post


Link to post
Share on other sites
2 minutes ago, MorenoAv said:

Well I don't know exactly what the issue is because I have restarted my machine and now the boot is like the picture, and my other ssd is missing... again, it appears and disappears randomly... 

I also am not sure what issue is exactly, if it' s related to "christmas" Clover theme (GUI) with macOS Mojave & APFS.. plz make sure these 2 *.icns are available on "\themes\christmas\icons\"

os_moja.icns
vol_internal_apfs.icns

But I have no idea with random issue, could be problem with NVRAM? Have you tried clearing it with (for example) "F11" key when Clover boot?

Share this post


Link to post
Share on other sites
7 hours ago, Amble said:

Stupid question. If I lower the CPU vcore in BIOS, does that have any effect in macOS if I have i7-7700k with native PM?  I lowered the vcore in BIOS, but it's still higher on HWmonitor.

 

NM, found an answer.

 

Does Clover SSDT / UnderVoltStep work with native PM? If it does, how much is one "step"?

Share this post


Link to post
Share on other sites
50 minutes ago, Amble said:

 

NM, found an answer.

 

Does Clover SSDT / UnderVoltStep work with native PM? If it does, how much is one "step"?

Only with Penryn CPU. One step is 1 in MSR register. Look for description of EIST.

Share this post


Link to post
Share on other sites
6 hours ago, Badruzeus said:

I also am not sure what issue is exactly, if it' s related to "christmas" Clover theme (GUI) with macOS Mojave & APFS.. plz make sure these 2 *.icns are available on "\themes\christmas\icons\"


os_moja.icns
vol_internal_apfs.icns

But I have no idea with random issue, could be problem with NVRAM? Have you tried clearing it with (for example) "F11" key when Clover boot?

Nvram clean done and didn't solve the problem, I only have one ssd at boot...

Thanks anyway

Share this post


Link to post
Share on other sites
4 hours ago, MorenoAv said:

Nvram clean done and didn't solve the problem, I only have one ssd at boot...

Thanks anyway

I'll have similar problem if (for example) OS Badge and Volume icon are missing.

I removed "os_moja.icns, vol_internal_apfs.icns, vol_internal_hfs.icns" from "christmas" theme's \icons dir and here's what I get: (again, plz recheck your theme or simply test with another one). Happy New Year!

SS-christmas-VBox.png

Edited by Badruzeus

Share this post


Link to post
Share on other sites
23 hours ago, Andres ZeroCross said:


Is this CLOVER or any SMC.kext/key problem??? Try with VirtualSMC.kext and FakeSMC.kext without success.

I use same configuration but working fine in Gigabyte B360 motherboard. This is MSI H310M PRO-M2 + i3 8100 + GTX1060. I use Clover r4813

I attach CLOVER folder for additional informations.

 

Neither, it is a problem with an ACPI table.

Share this post


Link to post
Share on other sites
10 hours ago, Badruzeus said:

I'll have similar problem if (for example) OS Badge and Volume icon are missing.

I removed "os_moja.icns, vol_internal_apfs.icns, vol_internal_hfs.icns" from "christmas" theme's \icons dir and here's what I get: (again, plz recheck your theme or simply test with another one). Happy New Year!

SS-christmas-VBox.png

Thanks man, happy new year to you too, and for the moment it stays as it is, because in the beginning of the new year I have a new build with an Asus Rog Strix H370-I mobo, Intel i5 8600K, 16 GB DDR4 2666 Crucial Ram, and M2 NVME Crucial 500 GB SSD.

Happy news year to all of you and thanks for all the help and tips gave to me...

Cheers   

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By gengstapo
      @Hervé
       
      Im having similar issue with my HS setup, dell latitute 3480, i5-7200U
      Once the hdmi plugged in, the laptop display went blank, only could see the external tv
      But, when i put my laptop to sleep & wake up again, both screen got display (hdmi still connected)
      Even the hdmi could be plugged off & in (after sleep), the laptop display is fine
       
      What could be the culprit?
      Dell’s MacBook Pro IORegistry.zip
      config.plist.zip
    • By TomZanna
      Hi, I'm trying to install Mac Os Catalina on a HP 550-132NL.
      The system has:
      i7-6700
      RAM 12 GB
      GT 730
      LAN Realtek RTL8161
      ALC3863
       
      It passes the verbose phase but after the Apple logo goes away, it gets stuck on a grey screen and I can only move the pointer.
      Can I try to boot with the iGPU?
       
      origin.zip
      CLOVER_dGPU_USB_3.zip
    • By MaLd0n
      ---TUTORIAL---
      https://www.olarila.com/topic/5794-guide-install-macos-with-olarila-image-step-by-step-install-and-post-install-windows-or-mac/
       
      --Original Post--
      https://www.olarila.com/topic/6531-olarila-hackbeast-z390-designare-thunderbolt-full-dsdt-patches-clover-opencore/
       
      --Bios/UEFI Settings--
       
      *Update bios/uefi to F7+*
      1- Go to M.I.T./Advanced Frequency Settings tab
       
      Extreme Memory Profile (X.M.P.) - Profile 1
       
      2- Go to BIOS tab
       
      CSM Support - Disabled
       
      3- Go to Peripherals/Thunderbolt(TM) Configuration tab
       
      Security Level - No Security
      Thunderbolt USB Support - Enabled
      GPIO3 Force Pwr - Enabled
       
      4- Go to Chipset tab
       
      Internal Graphics - Enable
       
      ---CLOVER FOLDER---
      https://olarila.com/files/Clover.Folder/EFI CLOVER Z390 DESIGNARE.zip
      *Use this folder with FULL DSDT PATCHED
       
      ---OPENCORE FOLDER---
      https://www.olarila.com/topic/6364-mojave-catalina-on-mobos-series-100200300-with-opencore-bootloader/
      *Use this folder with FULL DSDT PATCHED
       
       
      ---Extract one Full dump for DSDT edits, post files---
       
      RunMe.app
       
       
       
      ---HARDWARE---
       
      --MOBO

      GIGABYTE Z390 DESIGNARE
      -Link
      https://www.amazon.com/Z390-DESIGNARE-Gigabyte-Thunderbolt-Motherboard/dp/B07K8RJZRG/ref=sr_1_1?keywords=Z390+DESIGNARE&qid=1565492390&s=electronics&sr=1-1

      --PROCESSOR

      Intel Core i9-9900K
      -Link
      https://www.amazon.com/Intel-i9-9900K-Desktop-Processor-Unlocked/dp/B005404P9I/ref=sr_1_1_sspa?keywords=Intel+Core+i9-9900K&qid=1553358099&s=gateway&sr=8-1-spons&psc=1

      --COOLER

      CORSAIR H100i RGB PLATINUM AIO Liquid CPU Cooler
      -Link
      https://www.amazon.com/CORSAIR-H100i-PLATINUM-Liquid-Cooler/dp/B07JWB5BSN/ref=sr_1_4?keywords=WATER+COOLER+CPU&qid=1565492509&s=gateway&sr=8-4

      --MEMORY

      Corsair CMW32GX4M2C3200C16 Vengeance RGB PRO 32GB (2x16GB) DDR4 3200 (PC4-25600)
      -Link
      https://www.amazon.com/Corsair-CMW32GX4M2C3200C16-Vengeance-PC4-25600-Desktop/dp/B07GTG2T7L/ref=sr_1_15?keywords=memory+ddr4+32&qid=1553358238&s=gateway&sr=8-15

      --GPU

      MSI RX Vega 64 AIR Boost 8G OC
      -Link
      https://www.amazon.com/MSI-RX-64-AIR-8G/dp/B07DH7S1X1/ref=sr_1_2?keywords=vega+64+gigabyte&qid=1565492819&s=electronics&sr=1-2

      --SSD

      Samsung 970 EVO 1TB SSD (MZ-V7E1T0BW) NVMe M.2 V-NAND
      -Link
      https://www.amazon.com/Samsung-970-EVO-1TB-MZ-V7E1T0BW/dp/B07BN217QG/ref=sr_1_1?keywords=s+samsung+970+evo+1tb&qid=1565493002&s=electronics&sr=1-1

      --POWER SUPPLY

      EVGA Supernova 1000 P2 80+ Platinum, 1000W ECO Mode Fully Modular 
      -Link
      https://www.amazon.com/EVGA-Supernova-Platinum-Crossfire-220-P2-1000-XR/dp/B00EKJQM5E/ref=sr_1_3?keywords=power+supply+1000w&qid=1565493196&s=gateway&sr=8-3

      --WIRELESS

      TP-Link Archer T9E
      -Link
      https://www.amazon.com/TP-Link-Archer-T9E-Beamforming-Technology/dp/B00TQEX7AQ/ref=sr_1_1?keywords=TP-Link+Archer+T9E&qid=1553358397&s=gateway&sr=8-1

      --CASE

      Thermaltake Core P5 Tempered Glass Black Edition ATX Open Frame Panoramic Viewing
      -Link
      https://www.amazon.com/Thermaltake-Tempered-Panoramic-Certified-CA-1E7-00M1WN-03/dp/B01N4IGVSC/ref=sr_1_2?keywords=Thermaltake+Core+P5&qid=1565493567&s=gateway&sr=8-2

      --DSDT Patches--
      -FIX ACPI ERRORS -FIX OEM SSDTs to AVOID ERRORS AND WARNINGS -REMOVE UNUSED SCOPES / DEVICES -HIGH PRECISION EVENT TIMER -SATA -DMAC -REMOVE PROBLEMATIC AND UNUSED DEVICES -FIX K.P in REBOOT -SLPB -DARWIN / WINDOWS 2015 -XHCI -PLUGIN TYPE -HDAS to HDEF -HDEF -REAL TIME CLOCK -ARTC -IRQs -SBUS -BUS1 -MCHC -ALS0 -SHUTDOWN -LAN -FWHD -USBX -PMCR -PPMC -XSPI -CNVW -GMM -IMEI -EC -PNLF -ARPT -GFX0 -NVME -DTGP -ACQUIRE MUT0 0XFFFF -MUTEX MUT0 0x00 -EXTERNAL REFERENCES -UNKNOWNOBJ -HDMI / HDAU -FULL RENAMED DEVICES ---SCREENSHOTs---




















      -Credits and thanks to the old and new people in the community who developed patches, kexts and bootloaders!
      Thanks to KGP for SSDT Thunderbolt
      Slice, Kabyl, usr-sse2, jadran, Blackosx, dmazar, STLVNUB, pcj, apianti, JrCs, pene, FrodoKenny, skoczy, ycr.ru, Oscar09, xsmile, SoThOr, RehabMan, Download-Fritz, Zenit432, cecekpawon, Intel, Apple, Oracle, Chameleon Team, crazybirdy, Mieze, Mirone, Oldnapalm, netkas, Elconiglio, artut-pt, ErmaC, Pavo, Toleda, Master Chief and family, bcc9, The King, PMheart, Sherlocks, Micky1979, vit9696, vandroiy2013, Voodoo Team, Pike R. Alpha, lvs1974, Austere.J, CVad, Sampath007, onemanosx, erroruser, Jenny David, Olarila Facebook Community, Hackintosh Facebook Community and many others!
      We're all here to have fun and learn from each other!
    • By dgsga
      Can I propose a new subforum be created for the new OpenCorePkg OpenCore front end being created by vit9696 and others, it is a fantastic piece of work:
      https://github.com/acidanthera/OpenCorePkg
      Even at version 0.1 it runs my Mojave 10.14.4 setup very nearly flawlessly. It consists of a 10KB bootstrap BootX64.efi and a 200KB OpenCore.efi OS loader. All configuration is done using a very well documented config.plist 
       
       
×