Jump to content
ErmaC

Clover General discussion

19,137 posts in this topic

Recommended Posts

9 hours ago, Sherlocks said:

MP5,1 not support mojave right? did you get mp5,1.fd from 10.14 official installer?
i updated biosversion from mojave 10.14.1 beta3. the most of updated models support mojave.

It is supporting MP51.

The latest ver is

MP51.88Z.F000.B00.1809191555
EFI Version:  140.0.0.0.0
Quote

Apple released 10.14.1 DP3 and 140.0.0.0.0 Mac Pro BootROM.

  • NVMe EFI module added and it's different than the one from MP61,
  • PCIe drives still recognised as external,
  • Same 29 & 31 microcodes from May,
  • No boot screens for UEFI cards.

Apple released 10.14.1 DP1 and 139.0.0.0.0 Mac Pro BootROM.

  • No boot screens for UEFI cards,
  • no NVMe EFI module added,
  • no FileVault2,
  • same microcodes,
  • still safe to insert the NVMe EFI module.

 

Share this post


Link to post
Share on other sites
Advertisement

is FSInject-64 not mandatory anymore for UEFI? Its already installed on my system but when I update to new clover its show uncheck. I tried to install with check its installing but in every new update normally clover choosing efi's automatically but FSInject-64 always show uncheck. it is some kind of bug or it's not mandatory anymore and Clover toggle off automatically for us each new update?

Share this post


Link to post
Share on other sites
1 minute ago, telepati said:

is FSInject-64 not mandatory anymore for UEFI? Its already installed on my system but when I update to new clover its show uncheck. I tried to install with check its installing but in every new update normally clover choosing efi's automatically but FSInject-64 always show uncheck. it is some kind of bug or it's not mandatory anymore and Clover toggle off automatically for us each new update?

That means that you uncheck it once, maybe by cases. If you want to start with fresh preferences delete /Library/Preferences/com.projectosx.clover.installer.plist

Share this post


Link to post
Share on other sites
3 hours ago, vector sigma said:

That means that you uncheck it once, maybe by cases. If you want to start with fresh preferences delete /Library/Preferences/com.projectosx.clover.installer.plist

 

 

'cause every new update I am choosing it but next update it shows uncheck. Ok I will try that trick thank you :thumbsup_anim:

Share this post


Link to post
Share on other sites
16 minutes ago, Andrey1970 said:

I confirm a bug.
On 4695 works well.

 

Make sure SetIntelBacklight is also set to true. This seems like a rather annoying new requirement.

Share this post


Link to post
Share on other sites

ApfsDriverLoader.efi

APFS Format Fusion Drive Support ?

Clover Scan Entries stuck

Not boot

 

Manualy add apfs.efi

Boot Ok

 

---

Mojave 10.14.0

Clover 4705

ApfsDriverLoader AppleSupport v2.0.4

Share this post


Link to post
Share on other sites
15 hours ago, arimuras said:

ApfsDriverLoader.efi

APFS Format Fusion Drive Support ?

Clover Scan Entries stuck

Not boot

 

Manualy add apfs.efi

Boot Ok

 

---

Mojave 10.14.0

Clover 4705

ApfsDriverLoader AppleSupport v2.0.4

What if you choose ApfsDriverLoader and other efi drivers from Clover release 4700 package? Exclude outer drivers like AppleSupport.

Share this post


Link to post
Share on other sites
13 minutes ago, Slice said:

What if you choose ApfsDriverLoader and other efi drivers from Clover release 4700 package? Exclude outer drivers like AppleSupport. 

 

Clover release 4700 package

Same problem

Clover Scan Entries stuck

 

attach, efi driver

 

sorry for my bad english.

2018-10-14 15.20.20.png

Share this post


Link to post
Share on other sites
51 minutes ago, arimuras said:

 

Clover release 4700 package

Same problem

Clover Scan Entries stuck

 

attach, efi driver

 

sorry for my bad english.

2018-10-14 15.20.20.png

 

Did ApfsDriverLoader.efi work before? For compatibility with Fusion, I think you have to ask @savvas

Share this post


Link to post
Share on other sites
1 hour ago, arimuras said:

 

Clover release 4700 package

Same problem

Clover Scan Entries stuck

 

attach, efi driver

 

sorry for my bad english.

2018-10-14 15.20.20.png

Try to add "AppleImageLoader-64.efi" to avioid stuck. just use ApfsDriverLoader-6.efi instead APFS.efi :)

Share this post


Link to post
Share on other sites
2 hours ago, Andres ZeroCross said:

Try to add "AppleImageLoader-64.efi" to avioid stuck. just use ApfsDriverLoader-6.efi instead APFS.efi :)

Thank you for your reply

 

Clover release 4700 package 

Try to add AppleImageLoader-64.efi

Same, Clover Scan Entries stuck

2018-10-14 19.38.29.png

Share this post


Link to post
Share on other sites
5 minutes ago, arimuras said:

Thank you for your reply

 

Clover release 4700 package 

Try to add AppleImageLoader-64.efi

Same, Clover Scan Entries stuck

2018-10-14 19.38.29.png


What of your boot mode?? Legacy or UEFI?

Share this post


Link to post
Share on other sites
On 10/11/2018 at 12:49 PM, Sherlocks said:

I updated biosversion from mojave 10.14.1 beta3. the most of updated models support mojave.

Hi! I've managed the new thing. When I manually update BootROM version to the "latest", I have an error.

880505379_2018-10-1501_19_59.png.810e308745beaea923c169adbb783b60.png

718081458_2018-10-1501_19_16.png.fed3629c2f4147528e37860b63157f5c.png

My Hardware Overview has the wrong Boot ROM Version (MP51.F000.B00) which now should be 140.0.0.0 like here.

317815568_ScreenShot2018-10-08at10_25_02AM.png.d36f17c22b70ec267243b0e96662aeed.png

 

That is why I cant update my "MacPro5,1" to Mojave with metal-compatible card HD7770.

 

@slice, I think we now have to add this case for Mojave- compatible machines, like "EFI Version" BootROM version (EFI Version: 140.0.0.0.0) into Platformdata.c typedef struct:

$IBIOSI$ MP51.88Z.F000.B00.1809191555
Apple ROM Version
  Model:        MP51
  EFI Version:  140.0.0.0.0
  Date:         Wed Sep 19 15:49:52 2018
  Build Type:   Release

 

Share this post


Link to post
Share on other sites
Hi! I've managed the new thing. When I manually update BootROM version to the "latest", I have an error.

880505379_2018-10-1501_19_59.png.810e308745beaea923c169adbb783b60.png

718081458_2018-10-1501_19_16.png.fed3629c2f4147528e37860b63157f5c.png

My Hardware Overview has the wrong Boot ROM Version (MP51.F000.B00) which now should be 140.0.0.0 like here.

317815568_ScreenShot2018-10-08at10_25_02AM.png.d36f17c22b70ec267243b0e96662aeed.png

 

That is why I cant update my "MacPro5,1" to Mojave with metal-compatible card HD7770.

 

[mention=112217]slice[/mention], I think we now have to add this case for Mojave- compatible machines, like "EFI Version" BootROM version (EFI Version: 140.0.0.0.0) into Platformdata.c typedef struct:

$IBIOSI$ MP51.88Z.F000.B00.1809191555Apple ROM Version Model:        MP51 EFI Version:  140.0.0.0.0 Date:         Wed Sep 19 15:49:52 2018 Build Type:   Release

 

 

i also checked some models(MBP15,x/MP5,1/etc) changed biosversion part(?) or added EFI version part(?). probably seems changed it in 10.14.1 beta or 10.14 release. i think need DMI dump from realmac for clear between Boot Version and EFI version.

 

EDIT1

EFI version and BootROM version same? so no need BootROM? when you first reported, your biosversion is BootROM version. hmm.

 

나의 LG-F800S 의 Tapatalk에서 보냄

 

 

 

Share this post


Link to post
Share on other sites
27 minutes ago, Sherlocks said:

i also checked some models(MBP15,x/MP5,1/etc) changed biosversion part(?) or added EFI version part(?). probably seems changed it in 10.14.1 beta or 10.14 release. i think need DMI dump from realmac for clear between Boot Version and EFI version.

From PB6 it has changed. Click.

 

Quote

20180813: BootROM 138.0.0.0.0
New BootROM 138.0.0.0.0 for Mac Pro 5,1 with updated microcodes (0x106A5 29 and 0x206C2 31), support for 5GT/s link speed on macOS/Windows without R17 mod, enabled HDMI audio on RX480 and new/improved firmware flasher on Mojave DP7/PB6 (18A365a) full installer.

 

Share this post


Link to post
Share on other sites
1 minute ago, Sherlocks said:

thanks. new BootROM format can install HS?
or do we have to consider it for only mojave?

Maybe it can. Click.

Quote

13[8,9].0.0.0.0 don't change the ability of booting previous macOS versions.

 

Can you see at my screenshots $IBIOSI$ click and no EFI Version.

1600176331_2018-06-059_11_20.png.07c6ce53b96eb55a0e1158c7a0f00ef1.png.f7b8bbbe63ac76b722068b9aa58b40fa.png

0089 is the same.

But from EFI Version 138.0.0.0.0 a BIOS has more lines click:

Quote

$IBIOSI$

Apple ROM Version

Model

EFI Version

Date

983110840_2018-10-113_02_38.png.db5ed477bcc0de613b77cdcc682103d3.png.88abee17d512f3b16a080eb13bfcbecf.png

 

I attached ver 138.0.0.0.0 if you want to search with UEFITool. Try plz.

MP51.fd.zip

Share this post


Link to post
Share on other sites

Anyway, what does mean with this bootlog? (not sure since which Clover rev, but on my case is using r4706)

56:850  0:395  w=xxx, h=yyy
56:851  0:000  draw on background

Is this for debugging purpose related to GUI or..? Fyi, I got these long logs on diff. 3 locations hmmb..

Spoiler

0:100  0:000  Starting Clover revision: 4706 on American Megatrends EFI
0:100  0:000  Build with: [Args: -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -t XCODE8 | -D DISABLE_USB_SUPPORT -D NO_GRUB_DRIVERS_EMBEDDED --conf=/Users/badruzeus/src/edk2/Conf -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 5 | OS: 10.11.6 | XCODE: 8.2.1]
.....  .....  ...
0:929  0:000  === [ LoadDrivers ] =======================================
0:933  0:003  Loading AppleImageLoader-64.efi  status=Success
0:937  0:004  Loading AptioMemoryFix-64.efi  status=Success
0:938  0:000  Loading CsmVideoDxe-64.efi  status=Success
0:940  0:001   - driver needs connecting
0:940  0:000  Loading DataHubDxe-64.efi  status=Success
0:944  0:004  Loading EnglishDxe-64.efi  status=Success
0:945  0:000  Loading FSInject-64.efi  status=Success
0:946  0:000  Loading VBoxHfs-64.efi  status=Success
0:946  0:000   - driver needs connecting
0:946  0:000  2 drivers needs connecting ...
0:946  0:000  PlatformDriverOverrideProtocol not found. Installing ... Success
0:946  0:000  Video driver loaded: disconnect Success
1:017  0:070  Searching for invalid DiskIo BY_DRIVER connects:
1:017  0:000   - Handle 2169118 with DiskIo, is Partition, no Fs, BY_DRIVER Agent: 1703618, Disconnect: Success
1:017  0:000   - Handle 217ED98 with DiskIo, is Partition, no Fs, BY_DRIVER Agent: 1703618, Disconnect: Success
1:032  0:015  CsmVideoDriverBindingStart
1:032  0:000  mixed support=40010
1:032  0:000  Controller is [030000]
1:032  0:000  Check for VBE
1:232  0:199    0 640x480 attr=3BF - ok, 640x480, working, highest, pref=0
1:234  0:001    1 800x600 attr=3BF - ok, 800x600, working, highest, pref=1
1:235  0:001    2 1024x768 attr=3BF - ok, 1024x768, working, highest, pref=2
1:245  0:010    3 1360x768 attr=3BF - ok
1:245  0:000  CsmVideo: New mode: 2 1024x768 - set
1:467  0:221   - SetMode pref 2 (2) = Success
1:467  0:000  CsmVideoCheckForVbe - Success
1:467  0:000  CsmVideoDriverBindingStart end Success
1:468  0:000  CsmVideo: New mode: 1 800x600 - blocking that switch
1:836  0:367  === [ InitScreen ] ========================================
1:836  0:000  SetScreenResolution: 1360x768 - setting Mode 3
1:836  0:000  CsmVideo: New mode: 3 1360x768 - set
2:136  0:300  Video mode change to mode #3: Success
2:136  0:000  Console modes reported: 3, available modes:
2:136  0:000   - [01]: 80x25 (current mode)
2:136  0:000   - [03]: 100x31
2:136  0:000  SetScreenResolution: 1360x768 - already set
.....  .....  ...


56:455  0:000  === [ FindStartupDiskVolume ] =============================
56:455  0:000    - Volume: partition = PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,FC06ABAF-DEA8-446D-A678-61E403314E40,0x4EDF2B8,0xB7A0E70)
56:455  0:000     - searching for that partition
56:455  0:000      - found entry 1. 'OS X El Capitan', Volume 'Macintosh HD'
56:455  0:000  Boot redirected to Entry 1. 'OS X El Capitan'
56:455  0:000  DefaultIndex=1 and MainMenu.EntryCount=12
56:850  0:395  w=320, h=160
56:851  0:000  draw on background
56:861  0:009  w=180, h=180
56:861  0:000  draw on background
56:864  0:003  w=180, h=180
56:864  0:000  draw on background
56:867  0:002  w=180, h=180
56:867  0:000  draw on background
56:870  0:002  w=180, h=180
56:870  0:000  draw on background
56:873  0:002  w=180, h=180
56:874  0:000  draw on background
56:876  0:002  w=180, h=180
56:877  0:000  draw on background
56:879  0:002  w=72, h=72
56:879  0:000  draw on background
56:880  0:000  w=72, h=72
56:880  0:000  draw on background
56:880  0:000  w=72, h=72
56:880  0:000  draw on background
56:881  0:000  w=72, h=72
56:881  0:000  draw on background
56:881  0:000  w=72, h=72
56:881  0:000  draw on background
56:882  0:000  w=72, h=72
56:882  0:000  draw on background
56:882  0:000  w=165, h=22
56:882  0:000  draw on background
56:883  0:000  w=1354, h=22
56:883  0:000  draw on background
56:885  0:002  w=44, h=22
56:885  0:000  draw on background
58:868  1:982  w=320, h=160
58:868  0:000  draw on background
58:872  0:003  w=297, h=22
58:872  0:000  draw on background
58:873  0:000  w=160, h=160
58:873  0:000  draw on background
58:875  0:002  w=1018, h=22
58:875  0:000  draw on background
58:877  0:001  w=1018, h=22
58:877  0:000  draw on background
58:879  0:001  w=1018, h=22
58:879  0:000  draw on background
58:881  0:001  w=1018, h=22
58:881  0:000  draw on background
58:883  0:001  w=1018, h=22
58:883  0:000  draw on background
58:891  0:008  w=1018, h=22
58:892  0:000  draw on background
58:893  0:001  w=1018, h=22
58:894  0:000  draw on background
58:895  0:001  w=1018, h=22
58:895  0:000  draw on background
58:897  0:001  w=1018, h=22
58:897  0:000  draw on background
58:899  0:001  w=1018, h=22
58:899  0:000  draw on background
58:901  0:001  w=1018, h=22
58:901  0:000  draw on background
58:903  0:001  w=1018, h=22
58:903  0:000  draw on background
58:905  0:001  w=15, h=15
58:905  0:000  draw on background
58:905  0:000  w=1018, h=22
58:905  0:000  draw on background
58:907  0:001  w=1018, h=22
58:907  0:000  draw on background
58:908  0:001  w=15, h=15
58:908  0:000  draw on background
58:908  0:000  w=1018, h=22
58:909  0:000  draw on background
58:910  0:001  w=1018, h=22
58:910  0:000  draw on background
58:912  0:001  w=15, h=15
58:912  0:000  draw on background
58:912  0:000  w=1018, h=22
58:912  0:000  draw on background
58:914  0:001  w=1018, h=22
58:914  0:000  draw on background
58:916  0:001  w=15, h=15
58:916  0:000  draw on background
58:916  0:000  w=1018, h=22
58:916  0:000  draw on background
58:918  0:001  w=1018, h=22
58:918  0:000  draw on background
58:920  0:001  w=15, h=15
58:920  0:000  draw on background
58:920  0:000  w=1018, h=22
58:920  0:000  draw on background
58:921  0:001  w=1018, h=22
58:922  0:000  draw on background
58:923  0:001  w=15, h=15
58:923  0:000  draw on background
58:923  0:000  w=1018, h=22
58:923  0:000  draw on background
58:925  0:001  w=1018, h=22
58:925  0:000  draw on background
58:927  0:001  w=15, h=15
58:927  0:000  draw on background
58:927  0:000  w=1018, h=22
58:927  0:000  draw on background
58:929  0:001  w=1018, h=22
58:929  0:000  draw on background
58:931  0:001  w=15, h=15
58:931  0:000  draw on background
58:931  0:000  w=1018, h=22
58:931  0:000  draw on background
58:933  0:001  w=1018, h=22
58:933  0:000  draw on background
58:934  0:001  w=15, h=15
58:934  0:000  draw on background
58:935  0:000  w=16, h=308
58:935  0:000  draw on background
59:154  0:218  w=1018, h=22
59:154  0:000  draw on background
59:155  0:001  w=1018, h=22
59:156  0:000  draw on background
59:157  0:001  w=16, h=308
59:158  0:000  draw on background
59:326  0:168  w=1018, h=22
59:326  0:000  draw on background
59:328  0:001  w=1018, h=22
59:328  0:000  draw on background
59:330  0:001  w=16, h=308
59:330  0:000  draw on background
59:470  0:140  w=1018, h=22
59:470  0:000  draw on background
59:472  0:001  w=1018, h=22
59:472  0:000  draw on background
59:474  0:001  w=16, h=308
59:474  0:000  draw on background
59:615  0:140  w=1018, h=22
59:615  0:000  draw on background
59:616  0:001  w=1018, h=22
59:617  0:000  draw on background
59:619  0:001  w=16, h=308
59:619  0:000  draw on background
59:755  0:136  w=1018, h=22
59:755  0:000  draw on background
59:757  0:001  w=1018, h=22
59:757  0:000  draw on background
59:759  0:001  w=15, h=15
59:759  0:000  draw on background
59:759  0:000  w=16, h=308
59:759  0:000  draw on background
60:191  0:432  w=1018, h=22
60:191  0:000  draw on background
60:193  0:001  w=1018, h=22
60:193  0:000  draw on background
60:195  0:001  w=15, h=15
60:195  0:000  draw on background
60:195  0:000  w=16, h=308
60:195  0:000  draw on background
60:620  0:424  w=1018, h=22
60:620  0:000  draw on background
60:622  0:001  w=15, h=15
60:622  0:000  draw on background
60:622  0:000  w=1018, h=22
60:622  0:000  draw on background
60:624  0:001  w=15, h=15
60:624  0:000  draw on background
60:624  0:000  w=16, h=308
60:624  0:000  draw on background
60:786  0:162  w=1018, h=22
60:786  0:000  draw on background
60:788  0:001  w=15, h=15
60:788  0:000  draw on background
60:788  0:000  w=1018, h=22
60:789  0:000  draw on background
60:790  0:001  w=15, h=15
60:790  0:000  draw on background
60:790  0:000  w=16, h=308
60:790  0:000  draw on background
60:937  0:146  w=1018, h=22
60:937  0:000  draw on background
60:939  0:001  w=15, h=15
60:939  0:000  draw on background
60:939  0:000  w=1018, h=22
60:939  0:000  draw on background
60:941  0:001  w=15, h=15
60:941  0:000  draw on background
60:941  0:000  w=16, h=308
60:941  0:000  draw on background
61:066  0:125  w=1018, h=22
61:066  0:000  draw on background
61:068  0:001  w=15, h=15
61:068  0:000  draw on background
61:068  0:000  w=1018, h=22
61:069  0:000  draw on background
61:070  0:001  w=15, h=15
61:070  0:000  draw on background
61:070  0:000  w=16, h=308
61:070  0:000  draw on background
61:200  0:130  w=1018, h=22
61:201  0:000  draw on background
61:202  0:001  w=15, h=15
61:202  0:000  draw on background
61:202  0:000  w=1018, h=22
61:203  0:000  draw on background
61:204  0:001  w=15, h=15
61:204  0:000  draw on background
61:204  0:000  w=16, h=308
61:204  0:000  draw on background
61:602  0:397  w=1018, h=22
61:602  0:000  draw on background
61:603  0:001  w=15, h=15
61:603  0:000  draw on background
61:604  0:000  w=1018, h=22
61:604  0:000  draw on background
61:605  0:001  w=15, h=15
61:606  0:000  draw on background
61:606  0:000  w=16, h=308
61:606  0:000  draw on background
62:291  0:685  w=1018, h=22
62:291  0:000  draw on background
62:293  0:001  w=15, h=15
62:293  0:000  draw on background
62:293  0:000  w=1018, h=22
62:293  0:000  draw on background
62:295  0:001  w=15, h=15
62:295  0:000  draw on background
62:295  0:000  w=16, h=308
62:295  0:000  draw on background
62:460  0:164  w=1018, h=22
62:460  0:000  draw on background
62:462  0:001  w=15, h=15
62:462  0:000  draw on background
62:462  0:000  w=1018, h=22
62:462  0:000  draw on background
62:464  0:001  w=15, h=15
62:464  0:000  draw on background
62:464  0:000  w=16, h=308
62:464  0:000  draw on background
62:608  0:144  w=1018, h=22
62:608  0:000  draw on background
62:610  0:001  w=15, h=15
62:610  0:000  draw on background
62:610  0:000  w=1018, h=22
62:610  0:000  draw on background
62:612  0:001  w=15, h=15
62:612  0:000  draw on background
62:612  0:000  w=16, h=308
62:612  0:000  draw on background
62:763  0:151  w=1018, h=22
62:763  0:000  draw on background
62:765  0:001  w=15, h=15
62:765  0:000  draw on background
62:765  0:000  w=1018, h=22
62:765  0:000  draw on background
62:767  0:001  w=15, h=15
62:767  0:000  draw on background
62:767  0:000  w=16, h=308
62:767  0:000  draw on background
62:899  0:131  w=1018, h=22
62:899  0:000  draw on background
62:900  0:001  w=15, h=15
62:901  0:000  draw on background
62:901  0:000  w=1018, h=22
62:901  0:000  draw on background
62:903  0:001  w=15, h=15
62:903  0:000  draw on background
62:903  0:000  w=16, h=308
62:903  0:000  draw on background
63:051  0:148  w=1018, h=22
63:051  0:000  draw on background
63:053  0:001  w=15, h=15
63:053  0:000  draw on background
63:053  0:000  w=1018, h=22
63:053  0:000  draw on background
63:055  0:001  w=16, h=308
63:055  0:000  draw on background
63:194  0:138  w=1018, h=22
63:194  0:000  draw on background
63:196  0:001  w=1018, h=22
63:196  0:000  draw on background
63:198  0:001  w=16, h=308
63:198  0:000  draw on background
63:355  0:157  w=1018, h=22
63:355  0:000  draw on background
63:357  0:001  w=1018, h=22
63:358  0:000  draw on background
63:359  0:001  w=16, h=308
63:359  0:000  draw on background
63:513  0:153  w=1018, h=22
63:513  0:000  draw on background
63:515  0:001  w=1018, h=22
63:515  0:000  draw on background
63:517  0:001  w=16, h=308
63:517  0:000  draw on background
63:977  0:460   boot with args: slide=128 darkwake=0 -v  nvda_drv=1
63:977  0:000  ParseBootOption: invalid input params
63:977  0:000  BootVariable of the entry is empty
63:977  0:000  === [ StartLoader ] =======================================
63:977  0:000  Finally: ExternalClock=25MHz BusSpeed=99774kHz CPUFreq=2195MHz PIS: hw.busfrequency=100000000Hz
63:977  0:000  Loading boot.efi  status=Success
64:472  0:494  GetOSVersion: 10.11.6 (15G22010)
......  .....  ...
64:500  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
64:500  0:000  Extra kext: EFI\CLOVER\kexts\Other\CalDigitFastIO.kext (v.2.6.1)
64:528  0:027  Extra kext: EFI\CLOVER\kexts\Other\ApplePS2SmartTouchPad.kext (v.4.6.8)
64:640  0:112    |-- PlugIn kext: EFI\CLOVER\kexts\Other\ApplePS2SmartTouchPad.kext\Contents\PlugIns\ApplePS2Controller.kext (v.4.6.8)
64:666  0:026    |-- PlugIn kext: EFI\CLOVER\kexts\Other\ApplePS2SmartTouchPad.kext\Contents\PlugIns\ApplePS2Keyboard.kext (v.4.6.8)
64:694  0:027  Extra kext: EFI\CLOVER\kexts\Other\RealtekRTL8111.kext (v.2.2.2)
64:730  0:036  Extra kext: EFI\CLOVER\kexts\Other\AsusFnKeys.kext (v.1.0.6)
64:760  0:030  Extra kext: EFI\CLOVER\kexts\Other\AsusACPIBackLightPanel.kext (v.1.7)
64:786  0:026  Extra kext: EFI\CLOVER\kexts\Other\CodecCommander.kext (v.2.7.1)
64:867  0:080  Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext (v.1.3.3)
66:721  1:854  Extra kext: EFI\CLOVER\kexts\Other\CalDigitUSBxHCI.kext (v.1.3.8a2)
66:782  0:061  Extra kext: EFI\CLOVER\kexts\Other\IOath3kfrmwr.kext (v.1.2.1)
66:864  0:082  Extra kext: EFI\CLOVER\kexts\Other\Lilu.kext (v.1.2.7)
66:909  0:045  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.11
66:909  0:000  Extra kext: EFI\CLOVER\kexts\10.11\VirtualSMC.kext (v.1.0.1)
67:092  0:182    |-- PlugIn kext: EFI\CLOVER\kexts\10.11\VirtualSMC.kext\Contents\PlugIns\SMCProcessor.kext (v.1.0.1)
67:129  0:036    |-- PlugIn kext: EFI\CLOVER\kexts\10.11\VirtualSMC.kext\Contents\PlugIns\SMCLightSensor.kext (v.1.0.0d1)
67:160  0:031    |-- PlugIn kext: EFI\CLOVER\kexts\10.11\VirtualSMC.kext\Contents\PlugIns\SMCBatteryManager.kext (v.1.0.0d1)
67:199  0:038  SetStartupDiskVolume:
67:199  0:000    * Volume: 'Macintosh HD'
......  .....  ...

 

 

Edited by Badruzeus

Share this post


Link to post
Share on other sites
20 minutes ago, Badruzeus said:

Anyway, what does mean with this bootlog? (not sure since which Clover rev, but on my case is using r4706)


56:850  0:395  w=xxx, h=yyy
56:851  0:000  draw on background

Is this for debugging purpose related to GUI or..? Fyi, I got these long logs on diff. 3 locations hmmb..

  Reveal hidden contents


0:100  0:000  Starting Clover revision: 4706 on American Megatrends EFI
0:100  0:000  Build with: [Args: -mc --no-usb -D NO_GRUB_DRIVERS_EMBEDDED -t XCODE8 | -D DISABLE_USB_SUPPORT -D NO_GRUB_DRIVERS_EMBEDDED --conf=/Users/badruzeus/src/edk2/Conf -D USE_BIOS_BLOCKIO -D USE_LOW_EBDA -a X64 -b RELEASE -t XCODE8 -n 5 | OS: 10.11.6 | XCODE: 8.2.1]
.....  .....  ...
0:929  0:000  === [ LoadDrivers ] =======================================
0:933  0:003  Loading AppleImageLoader-64.efi  status=Success
0:937  0:004  Loading AptioMemoryFix-64.efi  status=Success
0:938  0:000  Loading CsmVideoDxe-64.efi  status=Success
0:940  0:001   - driver needs connecting
0:940  0:000  Loading DataHubDxe-64.efi  status=Success
0:944  0:004  Loading EnglishDxe-64.efi  status=Success
0:945  0:000  Loading FSInject-64.efi  status=Success
0:946  0:000  Loading VBoxHfs-64.efi  status=Success
0:946  0:000   - driver needs connecting
0:946  0:000  2 drivers needs connecting ...
0:946  0:000  PlatformDriverOverrideProtocol not found. Installing ... Success
0:946  0:000  Video driver loaded: disconnect Success
1:017  0:070  Searching for invalid DiskIo BY_DRIVER connects:
1:017  0:000   - Handle 2169118 with DiskIo, is Partition, no Fs, BY_DRIVER Agent: 1703618, Disconnect: Success
1:017  0:000   - Handle 217ED98 with DiskIo, is Partition, no Fs, BY_DRIVER Agent: 1703618, Disconnect: Success
1:032  0:015  CsmVideoDriverBindingStart
1:032  0:000  mixed support=40010
1:032  0:000  Controller is [030000]
1:032  0:000  Check for VBE
1:232  0:199    0 640x480 attr=3BF - ok, 640x480, working, highest, pref=0
1:234  0:001    1 800x600 attr=3BF - ok, 800x600, working, highest, pref=1
1:235  0:001    2 1024x768 attr=3BF - ok, 1024x768, working, highest, pref=2
1:245  0:010    3 1360x768 attr=3BF - ok
1:245  0:000  CsmVideo: New mode: 2 1024x768 - set
1:467  0:221   - SetMode pref 2 (2) = Success
1:467  0:000  CsmVideoCheckForVbe - Success
1:467  0:000  CsmVideoDriverBindingStart end Success
1:468  0:000  CsmVideo: New mode: 1 800x600 - blocking that switch
1:836  0:367  === [ InitScreen ] ========================================
1:836  0:000  SetScreenResolution: 1360x768 - setting Mode 3
1:836  0:000  CsmVideo: New mode: 3 1360x768 - set
2:136  0:300  Video mode change to mode #3: Success
2:136  0:000  Console modes reported: 3, available modes:
2:136  0:000   - [01]: 80x25 (current mode)
2:136  0:000   - [03]: 100x31
2:136  0:000  SetScreenResolution: 1360x768 - already set
.....  .....  ...


56:455  0:000  === [ FindStartupDiskVolume ] =============================
56:455  0:000    - Volume: partition = PciRoot(0x0)\Pci(0x1F,0x2)\Sata(0x0,0xFFFF,0x0)\HD(4,GPT,FC06ABAF-DEA8-446D-A678-61E403314E40,0x4EDF2B8,0xB7A0E70)
56:455  0:000     - searching for that partition
56:455  0:000      - found entry 1. 'OS X El Capitan', Volume 'Macintosh HD'
56:455  0:000  Boot redirected to Entry 1. 'OS X El Capitan'
56:455  0:000  DefaultIndex=1 and MainMenu.EntryCount=12
56:850  0:395  w=320, h=160
56:851  0:000  draw on background
56:861  0:009  w=180, h=180
56:861  0:000  draw on background
56:864  0:003  w=180, h=180
56:864  0:000  draw on background
56:867  0:002  w=180, h=180
56:867  0:000  draw on background
56:870  0:002  w=180, h=180
56:870  0:000  draw on background
56:873  0:002  w=180, h=180
56:874  0:000  draw on background
56:876  0:002  w=180, h=180
56:877  0:000  draw on background
56:879  0:002  w=72, h=72
56:879  0:000  draw on background
56:880  0:000  w=72, h=72
56:880  0:000  draw on background
56:880  0:000  w=72, h=72
56:880  0:000  draw on background
56:881  0:000  w=72, h=72
56:881  0:000  draw on background
56:881  0:000  w=72, h=72
56:881  0:000  draw on background
56:882  0:000  w=72, h=72
56:882  0:000  draw on background
56:882  0:000  w=165, h=22
56:882  0:000  draw on background
56:883  0:000  w=1354, h=22
56:883  0:000  draw on background
56:885  0:002  w=44, h=22
56:885  0:000  draw on background
58:868  1:982  w=320, h=160
58:868  0:000  draw on background
58:872  0:003  w=297, h=22
58:872  0:000  draw on background
58:873  0:000  w=160, h=160
58:873  0:000  draw on background
58:875  0:002  w=1018, h=22
58:875  0:000  draw on background
58:877  0:001  w=1018, h=22
58:877  0:000  draw on background
58:879  0:001  w=1018, h=22
58:879  0:000  draw on background
58:881  0:001  w=1018, h=22
58:881  0:000  draw on background
58:883  0:001  w=1018, h=22
58:883  0:000  draw on background
58:891  0:008  w=1018, h=22
58:892  0:000  draw on background
58:893  0:001  w=1018, h=22
58:894  0:000  draw on background
58:895  0:001  w=1018, h=22
58:895  0:000  draw on background
58:897  0:001  w=1018, h=22
58:897  0:000  draw on background
58:899  0:001  w=1018, h=22
58:899  0:000  draw on background
58:901  0:001  w=1018, h=22
58:901  0:000  draw on background
58:903  0:001  w=1018, h=22
58:903  0:000  draw on background
58:905  0:001  w=15, h=15
58:905  0:000  draw on background
58:905  0:000  w=1018, h=22
58:905  0:000  draw on background
58:907  0:001  w=1018, h=22
58:907  0:000  draw on background
58:908  0:001  w=15, h=15
58:908  0:000  draw on background
58:908  0:000  w=1018, h=22
58:909  0:000  draw on background
58:910  0:001  w=1018, h=22
58:910  0:000  draw on background
58:912  0:001  w=15, h=15
58:912  0:000  draw on background
58:912  0:000  w=1018, h=22
58:912  0:000  draw on background
58:914  0:001  w=1018, h=22
58:914  0:000  draw on background
58:916  0:001  w=15, h=15
58:916  0:000  draw on background
58:916  0:000  w=1018, h=22
58:916  0:000  draw on background
58:918  0:001  w=1018, h=22
58:918  0:000  draw on background
58:920  0:001  w=15, h=15
58:920  0:000  draw on background
58:920  0:000  w=1018, h=22
58:920  0:000  draw on background
58:921  0:001  w=1018, h=22
58:922  0:000  draw on background
58:923  0:001  w=15, h=15
58:923  0:000  draw on background
58:923  0:000  w=1018, h=22
58:923  0:000  draw on background
58:925  0:001  w=1018, h=22
58:925  0:000  draw on background
58:927  0:001  w=15, h=15
58:927  0:000  draw on background
58:927  0:000  w=1018, h=22
58:927  0:000  draw on background
58:929  0:001  w=1018, h=22
58:929  0:000  draw on background
58:931  0:001  w=15, h=15
58:931  0:000  draw on background
58:931  0:000  w=1018, h=22
58:931  0:000  draw on background
58:933  0:001  w=1018, h=22
58:933  0:000  draw on background
58:934  0:001  w=15, h=15
58:934  0:000  draw on background
58:935  0:000  w=16, h=308
58:935  0:000  draw on background
59:154  0:218  w=1018, h=22
59:154  0:000  draw on background
59:155  0:001  w=1018, h=22
59:156  0:000  draw on background
59:157  0:001  w=16, h=308
59:158  0:000  draw on background
59:326  0:168  w=1018, h=22
59:326  0:000  draw on background
59:328  0:001  w=1018, h=22
59:328  0:000  draw on background
59:330  0:001  w=16, h=308
59:330  0:000  draw on background
59:470  0:140  w=1018, h=22
59:470  0:000  draw on background
59:472  0:001  w=1018, h=22
59:472  0:000  draw on background
59:474  0:001  w=16, h=308
59:474  0:000  draw on background
59:615  0:140  w=1018, h=22
59:615  0:000  draw on background
59:616  0:001  w=1018, h=22
59:617  0:000  draw on background
59:619  0:001  w=16, h=308
59:619  0:000  draw on background
59:755  0:136  w=1018, h=22
59:755  0:000  draw on background
59:757  0:001  w=1018, h=22
59:757  0:000  draw on background
59:759  0:001  w=15, h=15
59:759  0:000  draw on background
59:759  0:000  w=16, h=308
59:759  0:000  draw on background
60:191  0:432  w=1018, h=22
60:191  0:000  draw on background
60:193  0:001  w=1018, h=22
60:193  0:000  draw on background
60:195  0:001  w=15, h=15
60:195  0:000  draw on background
60:195  0:000  w=16, h=308
60:195  0:000  draw on background
60:620  0:424  w=1018, h=22
60:620  0:000  draw on background
60:622  0:001  w=15, h=15
60:622  0:000  draw on background
60:622  0:000  w=1018, h=22
60:622  0:000  draw on background
60:624  0:001  w=15, h=15
60:624  0:000  draw on background
60:624  0:000  w=16, h=308
60:624  0:000  draw on background
60:786  0:162  w=1018, h=22
60:786  0:000  draw on background
60:788  0:001  w=15, h=15
60:788  0:000  draw on background
60:788  0:000  w=1018, h=22
60:789  0:000  draw on background
60:790  0:001  w=15, h=15
60:790  0:000  draw on background
60:790  0:000  w=16, h=308
60:790  0:000  draw on background
60:937  0:146  w=1018, h=22
60:937  0:000  draw on background
60:939  0:001  w=15, h=15
60:939  0:000  draw on background
60:939  0:000  w=1018, h=22
60:939  0:000  draw on background
60:941  0:001  w=15, h=15
60:941  0:000  draw on background
60:941  0:000  w=16, h=308
60:941  0:000  draw on background
61:066  0:125  w=1018, h=22
61:066  0:000  draw on background
61:068  0:001  w=15, h=15
61:068  0:000  draw on background
61:068  0:000  w=1018, h=22
61:069  0:000  draw on background
61:070  0:001  w=15, h=15
61:070  0:000  draw on background
61:070  0:000  w=16, h=308
61:070  0:000  draw on background
61:200  0:130  w=1018, h=22
61:201  0:000  draw on background
61:202  0:001  w=15, h=15
61:202  0:000  draw on background
61:202  0:000  w=1018, h=22
61:203  0:000  draw on background
61:204  0:001  w=15, h=15
61:204  0:000  draw on background
61:204  0:000  w=16, h=308
61:204  0:000  draw on background
61:602  0:397  w=1018, h=22
61:602  0:000  draw on background
61:603  0:001  w=15, h=15
61:603  0:000  draw on background
61:604  0:000  w=1018, h=22
61:604  0:000  draw on background
61:605  0:001  w=15, h=15
61:606  0:000  draw on background
61:606  0:000  w=16, h=308
61:606  0:000  draw on background
62:291  0:685  w=1018, h=22
62:291  0:000  draw on background
62:293  0:001  w=15, h=15
62:293  0:000  draw on background
62:293  0:000  w=1018, h=22
62:293  0:000  draw on background
62:295  0:001  w=15, h=15
62:295  0:000  draw on background
62:295  0:000  w=16, h=308
62:295  0:000  draw on background
62:460  0:164  w=1018, h=22
62:460  0:000  draw on background
62:462  0:001  w=15, h=15
62:462  0:000  draw on background
62:462  0:000  w=1018, h=22
62:462  0:000  draw on background
62:464  0:001  w=15, h=15
62:464  0:000  draw on background
62:464  0:000  w=16, h=308
62:464  0:000  draw on background
62:608  0:144  w=1018, h=22
62:608  0:000  draw on background
62:610  0:001  w=15, h=15
62:610  0:000  draw on background
62:610  0:000  w=1018, h=22
62:610  0:000  draw on background
62:612  0:001  w=15, h=15
62:612  0:000  draw on background
62:612  0:000  w=16, h=308
62:612  0:000  draw on background
62:763  0:151  w=1018, h=22
62:763  0:000  draw on background
62:765  0:001  w=15, h=15
62:765  0:000  draw on background
62:765  0:000  w=1018, h=22
62:765  0:000  draw on background
62:767  0:001  w=15, h=15
62:767  0:000  draw on background
62:767  0:000  w=16, h=308
62:767  0:000  draw on background
62:899  0:131  w=1018, h=22
62:899  0:000  draw on background
62:900  0:001  w=15, h=15
62:901  0:000  draw on background
62:901  0:000  w=1018, h=22
62:901  0:000  draw on background
62:903  0:001  w=15, h=15
62:903  0:000  draw on background
62:903  0:000  w=16, h=308
62:903  0:000  draw on background
63:051  0:148  w=1018, h=22
63:051  0:000  draw on background
63:053  0:001  w=15, h=15
63:053  0:000  draw on background
63:053  0:000  w=1018, h=22
63:053  0:000  draw on background
63:055  0:001  w=16, h=308
63:055  0:000  draw on background
63:194  0:138  w=1018, h=22
63:194  0:000  draw on background
63:196  0:001  w=1018, h=22
63:196  0:000  draw on background
63:198  0:001  w=16, h=308
63:198  0:000  draw on background
63:355  0:157  w=1018, h=22
63:355  0:000  draw on background
63:357  0:001  w=1018, h=22
63:358  0:000  draw on background
63:359  0:001  w=16, h=308
63:359  0:000  draw on background
63:513  0:153  w=1018, h=22
63:513  0:000  draw on background
63:515  0:001  w=1018, h=22
63:515  0:000  draw on background
63:517  0:001  w=16, h=308
63:517  0:000  draw on background
63:977  0:460   boot with args: slide=128 darkwake=0 -v  nvda_drv=1
63:977  0:000  ParseBootOption: invalid input params
63:977  0:000  BootVariable of the entry is empty
63:977  0:000  === [ StartLoader ] =======================================
63:977  0:000  Finally: ExternalClock=25MHz BusSpeed=99774kHz CPUFreq=2195MHz PIS: hw.busfrequency=100000000Hz
63:977  0:000  Loading boot.efi  status=Success
64:472  0:494  GetOSVersion: 10.11.6 (15G22010)
......  .....  ...
64:500  0:000  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
64:500  0:000  Extra kext: EFI\CLOVER\kexts\Other\CalDigitFastIO.kext (v.2.6.1)
64:528  0:027  Extra kext: EFI\CLOVER\kexts\Other\ApplePS2SmartTouchPad.kext (v.4.6.8)
64:640  0:112    |-- PlugIn kext: EFI\CLOVER\kexts\Other\ApplePS2SmartTouchPad.kext\Contents\PlugIns\ApplePS2Controller.kext (v.4.6.8)
64:666  0:026    |-- PlugIn kext: EFI\CLOVER\kexts\Other\ApplePS2SmartTouchPad.kext\Contents\PlugIns\ApplePS2Keyboard.kext (v.4.6.8)
64:694  0:027  Extra kext: EFI\CLOVER\kexts\Other\RealtekRTL8111.kext (v.2.2.2)
64:730  0:036  Extra kext: EFI\CLOVER\kexts\Other\AsusFnKeys.kext (v.1.0.6)
64:760  0:030  Extra kext: EFI\CLOVER\kexts\Other\AsusACPIBackLightPanel.kext (v.1.7)
64:786  0:026  Extra kext: EFI\CLOVER\kexts\Other\CodecCommander.kext (v.2.7.1)
64:867  0:080  Extra kext: EFI\CLOVER\kexts\Other\AppleALC.kext (v.1.3.3)
66:721  1:854  Extra kext: EFI\CLOVER\kexts\Other\CalDigitUSBxHCI.kext (v.1.3.8a2)
66:782  0:061  Extra kext: EFI\CLOVER\kexts\Other\IOath3kfrmwr.kext (v.1.2.1)
66:864  0:082  Extra kext: EFI\CLOVER\kexts\Other\Lilu.kext (v.1.2.7)
66:909  0:045  Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\10.11
66:909  0:000  Extra kext: EFI\CLOVER\kexts\10.11\VirtualSMC.kext (v.1.0.1)
67:092  0:182    |-- PlugIn kext: EFI\CLOVER\kexts\10.11\VirtualSMC.kext\Contents\PlugIns\SMCProcessor.kext (v.1.0.1)
67:129  0:036    |-- PlugIn kext: EFI\CLOVER\kexts\10.11\VirtualSMC.kext\Contents\PlugIns\SMCLightSensor.kext (v.1.0.0d1)
67:160  0:031    |-- PlugIn kext: EFI\CLOVER\kexts\10.11\VirtualSMC.kext\Contents\PlugIns\SMCBatteryManager.kext (v.1.0.0d1)
67:199  0:038  SetStartupDiskVolume:
67:199  0:000    * Volume: 'Macintosh HD'
......  .....  ...

 

 

 

I think you're right: is for debugging purpose related to GUI with Vector themes. @Slice will confirm it. Look at the screen file in the last commit.

 

https://sourceforge.net/p/cloverefiboot/code/4706/tree//rEFIt_UEFI/refit/screen.c?diff=504c3833fd48f873331ebd05:4705

Share this post


Link to post
Share on other sites
2 minutes ago, Matgen84 said:

 

I think you're right: is for debugging purpose related to GUI with Vector themes. @Slice will confirm it. Look at the screen file in the last commit.

 

https://sourceforge.net/p/cloverefiboot/code/4706/tree//rEFIt_UEFI/refit/screen.c?diff=504c3833fd48f873331ebd05:4705

OK, not a problem actually.. it doesn't decrease GUI performance at all, yeah.. getting it on VM as well.

Nevermind, not a big deal LoL

Share this post


Link to post
Share on other sites

Hello,

 

For a start, I want to say sorry if I have interrupted any discussion above that is not relevant to mine. Please also forgive my bad English. :)

 

Not playing with Hackintosh for a long while, today I took a glance at the current status of kernel patching under KernelAndKextPatches which Clover can handle at the moment, with all due respect, I somehow felt it an utter mess, therefore I think it's time to do some revolutionary changes, well, frankly speaking, now I am probably no more familiar with Clover code structure, or rather not at all, plus I do not have a copy of Clover source code nearby, I wish someone with great skills would help me deal with it, I am going to elaborate my point of view below:

 

  1. AppleIntelCPUPM and KernelPm should be merged, all the difference they have is just the destination, one is to AppleIntelCPUPowerManagement.kext and the other is to the kernel. Obviously no one is using both and only one of them will be effective. No side effect, no conflict either. So I believe it would be better to merge them. (Just as our automatic detection does, please see here: https://sourceforge.net/p/cloverefiboot/code/4706/tree/rEFIt_UEFI/Platform/Settings.c#l904, and the declaration of NeedPMFix is here: https://sourceforge.net/p/cloverefiboot/code/4706/tree/rEFIt_UEFI/Platform/cpu.c#l497)
  2. We should take the patch applied to _xcpm_idle into account, which has not been integrated to Clover and left missing, ever since we made some progress on XCPM and particularly HWP aspect. (Add this right to funtion KernelPatchPm in rEFIt_UEFI/Platform/kernel_patcher.c)
  3. KernelCPU has already been history and should be obsolete now, after FakeCPUID came out.

 

P.S.

For 1, I'd like to call the new key MSRE2Patch, as the name shows what it does. For backward compatibility, it will be turned on as long as either of the two good old keys is.

 

For 2, I do not have any device with HWP support (Skylake+), at least for now, further discussion required.

 

For 3, to be honest, I am not pretty sure. Anyway, from what I have seen, it is just faking CPUID as Penryn (0x17), see here: https://sourceforge.net/p/cloverefiboot/code/4706/tree/rEFIt_UEFI/Platform/kernel_patcher.c#l191, further discurrsion required as well.

 

 

PMheart

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Recently Browsing   0 members

    No registered users viewing this page.

  • Similar Content

    • By glasgood
      CLOVER DUAL BOOT MOJAVE & WINDOWS 10 GUIDE 
       

       
       
      INCLUDES  MBR / LEGACY BIOS  TO  GPT / EFI CONVERSION
      USING MBR2GPT TOOL
       
       
      PREREQUISITE: Two physical discs ( SSD’s or HDD’s )
       
       
       
       
       
      STEP 1 - Clover dual boot configuration 
       
      Open config.plist with Clover Configurator
       
      Boot
       Legacy = PBR Timeout = True ( will remove the Timeout countdown, from Clover boot menu)  

       
      GUI 
      Scan / Custom
       Entries = True  Tool = True  Legacy = False ( removes extra Windows 10 entries )  
      Hide Volume
      - Preboot ( macOS Preboot )
      - Recovery ( macOS Recovery )
       

       
      So at boot you will have two options: boot macOS Mojave or Windows 10 
       
       
       
       
       
       
       
      ————————————————————
       
       
      STEP 2 - Using a drive without Windows 10 installed
       
      Disconnect system drive that contains your macOS Mojave install from computer ( This is so that Windows does not overwrite existing macOS Mojave boot loader )
       
      Proceed with a Windows 10 UEFI install.  
      After installation reconnect macOS Mojave Drive, the Windows installation should now be detected and usable in Clover. 
      If Windows 10 is not detected or able to boot,  then verify you installed Windows 10 as UEFI and not MBR ---->  ( Read step 2 - For a drive with Windows 10 installed )
       
       
      OR
       
       
       
      STEP 2 - Using a drive with Windows 10 already installed
       
      Verify your Windows install is  GPT / UEFI or MBR / Legacy BIOS.   
      If Windows install is GPT UEFI then Windows 10 install is ready to use at Clover boot menu, you should be able to boot into Windows directly from Clover boot screen. 
       

       
       
      But if  Windows drive is detected at Clover boot screen, but when booting Windows you get a black screen with a cursor on the top left,
      then this is most likely because Windows drive is MBR ( Legacy BIOS ).  You can easily convert MBR to GPT using  Windows MBR2GPT tool ( this saves hours work having to reinstall Windows 10 and setting up all your applications again  ) 
       
      If Windows 10 install is MBR / Legacy BIOS  then simply convert to GPT / UEFI  following instructions below ( read video summary and view video )
       
       
      ** To use Windows 10  MBR2GPT tool  you must have Windows 10 version 1703 ( creators update  ) or later and less than 3 partitions on 
      the Windows 10 drive **
       
      Video summary:
       
      Confirm Windows 10 drive is MBR Legacy BIOS ( in Windows Disk Management ) Reboot into Windows PE ( Advanced Startup ) Convert from MBR Legacy BIOS to GPT UEFI ( using commands below ) mbr2gpt /validate mbr2gpt /convert Restart Verify Windows 10 drive has changed to GPT UEFI ( in Windows Disk Management )  
       
       
       
      After conversion Windows 10 is ready to use at the Clover boot menu 
       
       
       
      STEP 3 - Stop Windows Boot manager from overriding Clover boot manager
       
      How to stop Windows boot manager from overriding your Hackintosh Clover boot manager when using dual booting between macOS and Windows
       
       
       
       
       
       
    • By AppleBytes
      OK, I've searching for days trying to gather up the tools to make my current install work correctly. I'm well on my way. But all the links to the things I currently must have were apparently nuked "during a forum upgrade". :(
      As far as EFI Studio goes; I can find many links to it. But for Insanelymac, they're broken (due to the upgrade), or for the Netkas site, they're links to either Rapidshare, or Mediafire that also no linger exist. I see many users here indicating that they used it to tweak their DSDT. But the web (google/duckduckgo), Instanelymac, and Netkas seem to have no idea where it's gone.
      Could some kind soul please share a copy, or a link? I'm a loooong time hacker, and would love to bring it back to life. In fact, I'd love to improve it -- or at least bring it up to current times. If only I knew where it was.
      Thank you for all your time, and consideration.
       
      --Chris
       
    • By SoThOr
      This was spurred on from a discussion in the Clover General thread. Where there was a debate on bcdedit being able create/read/edit (U)EFI Boot entries. I didn't think it appropriate to post all this information there and somebody may want to make use of this and its likely to get lost in that massive thread.
       
      Out of curiosity I decided to see if I could create an EFI entry using bcdedit. What can I say I like a challenge.  Whilst is not a documented method by Microsoft, as it turns out in a round about way it IS possible to create an EFI entry using bcdedit and these are the steps I went through to add UEFI Shell located on a USB stick to the EFI entries. 
       
      Third party software is available that can create and edit UEFI entries from Windows with better support and more features. I'm just making this information available in case those options are unavailable. 
       
      DISCLAIMER - This is not a supported method. Use at your own risk. I recommend backing up your BCD/Firmware variables/settings beforehand.
       
      1) Copy {bootmgr} entry.
      C:\Windows\System32>bcdedit /copy {bootmgr} /d "UEFI Shell" The entry was successfully copied to {34e8383c-73a7-11e9-9cb0-94de8078a7b5}. 2) Edit the new entry using the new GUID bcdedit generated in the copy step.
        a) Set the device and path for UEFI shell on my USB stick.
      bcdedit /set {34e8383d-73a7-11e9-9cb0-94de8078a7b5} device partition=G: bcdedit /set {34e8383d-73a7-11e9-9cb0-94de8078a7b5} path \EFI\SHELL\SHELLX64.efi   b) Clean up some of the stuff that was copied from {bootmgr} (optional as far as I can tell, just makes things tidier in bcdedit)
      3) Put the new EFI entry first in boot order. (optional)
       
      After completing the steps above, here is what "bcdedit /enum firmware" shows:
       
      I shutdown my computer and when I turned my computer back on it booted up into UEFI Shell. After exiting the shell my PC went on to boot Windows.
      Here is the resulting dump using "bcfg boot dump -v" from that shell:
       
      You may notice that the shell shows as "Windows Boot Manager" in the bcdedit output. This I believe is because of the "WINDOWS" at the beginning of the option data that bcdedit added to the EFI Boot entry. I also believe this why bcdedit shows my Windows 8 installation as "Firmware Application" because it has no option data. I don't know how to remove this data using bcdedit nor do I know how the option data, that bcdedit adds, will affect other EFI applications.

      There might be a way to create the EFI entry without copying the Windows entry but if there is I'm unable to find any documentation on how one would do so. If you use the create command then it just puts it in the BCD and I'm unaware of a way to tell it to create it in EFI instead, other than by doing the above.
    • By cvad
      Small tool to download, compile and build the latest Clover X64 package.
       
       
       

      The script inside is editable.

       
      Enjoy...
       
      Many thanks to the comrade SunKi for help with creating the script.
       
       
       
       
       
      Best thanks - click "Rate File".
       
    • By blxkspell
      Hey!
      As I have 3 Monitors connected, my RX 570 gets arround 50°C while ideling/ web browsing etc. The problem is, that this temp is apparently just the threshold, when the fans start to spin. So the fans start spinning for a minute then they stop for a while again... This is very annoying for me as the rest of my hackintosh is nearly quiet (SSD, 120mm low RPM cpu fan, nearly silent PSU,...), especially when Im using the pc to revise for school. Does somebody know wether its possible to "change" the threshold till the fans start spinning? Like it would probably not be a problem for the gpu at all, if the temp rises to 55°C but therefore be soundless....
       
       
×